• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1* APM X-Gene SoC EDAC node
2
3EDAC node is defined to describe on-chip error detection and correction.
4The follow error types are supported:
5
6  memory controller	- Memory controller
7  PMD (L1/L2)		- Processor module unit (PMD) L1/L2 cache
8  L3			- L3 cache controller
9  SoC			- SoC IP's such as Ethernet, SATA, and etc
10
11The following section describes the EDAC DT node binding.
12
13Required properties:
14- compatible		: Shall be "apm,xgene-edac".
15- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
16- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
17- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
18- regmap-efuse		: Regmap of the PMD efuse resource.
19- regmap-rb		: Regmap of the register bus resource. This property
20			  is optional only for compatibility. If the RB
21			  error conditions are not cleared, it will
22			  continuously generate interrupt.
23- reg			: First resource shall be the CPU bus (PCP) resource.
24- interrupts            : Interrupt-specifier for MCU, PMD, L3, or SoC error
25			  IRQ(s).
26
27Required properties for memory controller subnode:
28- compatible		: Shall be "apm,xgene-edac-mc".
29- reg			: First resource shall be the memory controller unit
30                          (MCU) resource.
31- memory-controller	: Instance number of the memory controller.
32
33Required properties for PMD subnode:
34- compatible		: Shall be "apm,xgene-edac-pmd" or
35                          "apm,xgene-edac-pmd-v2".
36- reg			: First resource shall be the PMD resource.
37- pmd-controller	: Instance number of the PMD controller.
38
39Required properties for L3 subnode:
40- compatible		: Shall be "apm,xgene-edac-l3" or
41                          "apm,xgene-edac-l3-v2".
42- reg			: First resource shall be the L3 EDAC resource.
43
44Required properties for SoC subnode:
45- compatible		: Shall be "apm,xgene-edac-soc-v1" for revision 1 or
46                          "apm,xgene-edac-l3-soc" for general value reporting
47                          only.
48- reg			: First resource shall be the SoC EDAC resource.
49
50Example:
51	csw: csw@7e200000 {
52		compatible = "apm,xgene-csw", "syscon";
53		reg = <0x0 0x7e200000 0x0 0x1000>;
54	};
55
56	mcba: mcba@7e700000 {
57		compatible = "apm,xgene-mcb", "syscon";
58		reg = <0x0 0x7e700000 0x0 0x1000>;
59	};
60
61	mcbb: mcbb@7e720000 {
62		compatible = "apm,xgene-mcb", "syscon";
63		reg = <0x0 0x7e720000 0x0 0x1000>;
64	};
65
66	efuse: efuse@1054a000 {
67		compatible = "apm,xgene-efuse", "syscon";
68		reg = <0x0 0x1054a000 0x0 0x20>;
69	};
70
71	rb: rb@7e000000 {
72		compatible = "apm,xgene-rb", "syscon";
73		reg = <0x0 0x7e000000 0x0 0x10>;
74	};
75
76	edac@78800000 {
77		compatible = "apm,xgene-edac";
78		#address-cells = <2>;
79		#size-cells = <2>;
80		ranges;
81		regmap-csw = <&csw>;
82		regmap-mcba = <&mcba>;
83		regmap-mcbb = <&mcbb>;
84		regmap-efuse = <&efuse>;
85		regmap-rb = <&rb>;
86		reg = <0x0 0x78800000 0x0 0x100>;
87		interrupts = <0x0 0x20 0x4>,
88			     <0x0 0x21 0x4>,
89			     <0x0 0x27 0x4>;
90
91		edacmc@7e800000 {
92			compatible = "apm,xgene-edac-mc";
93			reg = <0x0 0x7e800000 0x0 0x1000>;
94			memory-controller = <0>;
95		};
96
97		edacpmd@7c000000 {
98			compatible = "apm,xgene-edac-pmd";
99			reg = <0x0 0x7c000000 0x0 0x200000>;
100			pmd-controller = <0>;
101		};
102
103		edacl3@7e600000 {
104			compatible = "apm,xgene-edac-l3";
105			reg = <0x0 0x7e600000 0x0 0x1000>;
106		};
107
108		edacsoc@7e930000 {
109			compatible = "apm,xgene-edac-soc-v1";
110			reg = <0x0 0x7e930000 0x0 0x1000>;
111		};
112	};
113