1* Mediatek JPEG Decoder 2 3Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs 4 5Required properties: 6- compatible : must be one of the following string: 7 "mediatek,mt8173-jpgdec" 8 "mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec" 9 "mediatek,mt2701-jpgdec" 10- reg : physical base address of the jpeg decoder registers and length of 11 memory mapped region. 12- interrupts : interrupt number to the interrupt controller. 13- clocks: device clocks, see 14 Documentation/devicetree/bindings/clock/clock-bindings.txt for details. 15- clock-names: must contain "jpgdec-smi" and "jpgdec". 16- power-domains: a phandle to the power domain, see 17 Documentation/devicetree/bindings/power/power_domain.txt for details. 18- mediatek,larb: must contain the local arbiters in the current Socs, see 19 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt 20 for details. 21- iommus: should point to the respective IOMMU block with master port as 22 argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt 23 for details. 24 25Example: 26 jpegdec: jpegdec@15004000 { 27 compatible = "mediatek,mt2701-jpgdec"; 28 reg = <0 0x15004000 0 0x1000>; 29 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; 30 clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, 31 <&imgsys CLK_IMG_JPGDEC>; 32 clock-names = "jpgdec-smi", 33 "jpgdec"; 34 power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; 35 mediatek,larb = <&larb2>; 36 iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, 37 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; 38 }; 39