1Bosch C_CAN/D_CAN controller Device Tree Bindings 2------------------------------------------------- 3 4Required properties: 5- compatible : Should be "bosch,c_can" for C_CAN controllers and 6 "bosch,d_can" for D_CAN controllers. 7 Can be "ti,dra7-d_can", "ti,am3352-d_can" or 8 "ti,am4372-d_can". 9- reg : physical base address and size of the C_CAN/D_CAN 10 registers map 11- interrupts : property with a value describing the interrupt 12 number 13 14The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only: 15- ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the 16 instance number 17 18The following are mandatory properties for Keystone 2 66AK2G SoCs only: 19- power-domains : Should contain a phandle to a PM domain provider node 20 and an args specifier containing the DCAN device id 21 value. This property is as per the binding, 22 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt 23- clocks : CAN functional clock phandle. This property is as per the 24 binding, 25 Documentation/devicetree/bindings/clock/ti,sci-clk.txt 26 27Optional properties: 28- syscon-raminit : Handle to system control region that contains the 29 RAMINIT register, register offset to the RAMINIT 30 register and the CAN instance number (0 offset). 31 32Note: "ti,hwmods" field is used to fetch the base address and irq 33resources from TI, omap hwmod data base during device registration. 34Future plan is to migrate hwmod data base contents into device tree 35blob so that, all the required data will be used from device tree dts 36file. 37 38Example: 39 40Step1: SoC common .dtsi file 41 42 dcan1: d_can@481d0000 { 43 compatible = "bosch,d_can"; 44 reg = <0x481d0000 0x2000>; 45 interrupts = <55>; 46 interrupt-parent = <&intc>; 47 status = "disabled"; 48 }; 49 50(or) 51 52 dcan1: d_can@481d0000 { 53 compatible = "bosch,d_can"; 54 ti,hwmods = "d_can1"; 55 reg = <0x481d0000 0x2000>; 56 interrupts = <55>; 57 interrupt-parent = <&intc>; 58 status = "disabled"; 59 }; 60 61Step 2: board specific .dts file 62 63 &dcan1 { 64 status = "okay"; 65 }; 66