• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1.. SPDX-License-Identifier: GPL-2.0
2
3====================================
4Netfilter's flowtable infrastructure
5====================================
6
7This documentation describes the software flowtable infrastructure available in
8Netfilter since Linux kernel 4.16.
9
10Overview
11--------
12
13Initial packets follow the classic forwarding path, once the flow enters the
14established state according to the conntrack semantics (ie. we have seen traffic
15in both directions), then you can decide to offload the flow to the flowtable
16from the forward chain via the 'flow offload' action available in nftables.
17
18Packets that find an entry in the flowtable (ie. flowtable hit) are sent to the
19output netdevice via neigh_xmit(), hence, they bypass the classic forwarding
20path (the visible effect is that you do not see these packets from any of the
21netfilter hooks coming after the ingress). In case of flowtable miss, the packet
22follows the classic forward path.
23
24The flowtable uses a resizable hashtable, lookups are based on the following
257-tuple selectors: source, destination, layer 3 and layer 4 protocols, source
26and destination ports and the input interface (useful in case there are several
27conntrack zones in place).
28
29Flowtables are populated via the 'flow offload' nftables action, so the user can
30selectively specify what flows are placed into the flow table. Hence, packets
31follow the classic forwarding path unless the user explicitly instruct packets
32to use this new alternative forwarding path via nftables policy.
33
34This is represented in Fig.1, which describes the classic forwarding path
35including the Netfilter hooks and the flowtable fastpath bypass.
36
37::
38
39					 userspace process
40					  ^              |
41					  |              |
42				     _____|____     ____\/___
43				    /          \   /         \
44				    |   input   |  |  output  |
45				    \__________/   \_________/
46					 ^               |
47					 |               |
48      _________      __________      ---------     _____\/_____
49     /         \    /          \     |Routing |   /            \
50  -->  ingress  ---> prerouting ---> |decision|   | postrouting |--> neigh_xmit
51     \_________/    \__________/     ----------   \____________/          ^
52       |      ^                          |               ^                |
53   flowtable  |                     ____\/___            |                |
54       |      |                    /         \           |                |
55    __\/___   |                    | forward |------------                |
56    |-----|   |                    \_________/                            |
57    |-----|   |                 'flow offload' rule                       |
58    |-----|   |                   adds entry to                           |
59    |_____|   |                     flowtable                             |
60       |      |                                                           |
61      / \     |                                                           |
62     /hit\_no_|                                                           |
63     \ ? /                                                                |
64      \ /                                                                 |
65       |__yes_________________fastpath bypass ____________________________|
66
67	       Fig.1 Netfilter hooks and flowtable interactions
68
69The flowtable entry also stores the NAT configuration, so all packets are
70mangled according to the NAT policy that matches the initial packets that went
71through the classic forwarding path. The TTL is decremented before calling
72neigh_xmit(). Fragmented traffic is passed up to follow the classic forwarding
73path given that the transport selectors are missing, therefore flowtable lookup
74is not possible.
75
76Example configuration
77---------------------
78
79Enabling the flowtable bypass is relatively easy, you only need to create a
80flowtable and add one rule to your forward chain::
81
82	table inet x {
83		flowtable f {
84			hook ingress priority 0; devices = { eth0, eth1 };
85		}
86		chain y {
87			type filter hook forward priority 0; policy accept;
88			ip protocol tcp flow offload @f
89			counter packets 0 bytes 0
90		}
91	}
92
93This example adds the flowtable 'f' to the ingress hook of the eth0 and eth1
94netdevices. You can create as many flowtables as you want in case you need to
95perform resource partitioning. The flowtable priority defines the order in which
96hooks are run in the pipeline, this is convenient in case you already have a
97nftables ingress chain (make sure the flowtable priority is smaller than the
98nftables ingress chain hence the flowtable runs before in the pipeline).
99
100The 'flow offload' action from the forward chain 'y' adds an entry to the
101flowtable for the TCP syn-ack packet coming in the reply direction. Once the
102flow is offloaded, you will observe that the counter rule in the example above
103does not get updated for the packets that are being forwarded through the
104forwarding bypass.
105
106More reading
107------------
108
109This documentation is based on the LWN.net articles [1]_\ [2]_. Rafal Milecki
110also made a very complete and comprehensive summary called "A state of network
111acceleration" that describes how things were before this infrastructure was
112mainlined [3]_ and it also makes a rough summary of this work [4]_.
113
114.. [1] https://lwn.net/Articles/738214/
115.. [2] https://lwn.net/Articles/742164/
116.. [3] http://lists.infradead.org/pipermail/lede-dev/2018-January/010830.html
117.. [4] http://lists.infradead.org/pipermail/lede-dev/2018-January/010829.html
118