• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Porter board
4 *
5 * Copyright (C) 2015 Cogent Embedded, Inc.
6 */
7
8/*
9 * SSI-AK4642
10 *
11 * JP3: 2-1: AK4642
12 *      2-3: ADV7511
13 *
14 * This command is required before playback/capture:
15 *
16 *	amixer set "LINEOUT Mixer DACL" on
17 */
18
19/dts-v1/;
20#include "r8a7791.dtsi"
21#include <dt-bindings/gpio/gpio.h>
22
23/ {
24	model = "Porter";
25	compatible = "renesas,porter", "renesas,r8a7791";
26
27	aliases {
28		serial0 = &scif0;
29		i2c9 = &gpioi2c2;
30		i2c10 = &i2chdmi;
31		mmc0 = &sdhi0;
32		mmc1 = &sdhi2;
33	};
34
35	chosen {
36		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
37		stdout-path = "serial0:115200n8";
38	};
39
40	memory@40000000 {
41		device_type = "memory";
42		reg = <0 0x40000000 0 0x40000000>;
43	};
44
45	memory@200000000 {
46		device_type = "memory";
47		reg = <2 0x00000000 0 0x40000000>;
48	};
49
50	vcc_sdhi0: regulator-vcc-sdhi0 {
51		compatible = "regulator-fixed";
52
53		regulator-name = "SDHI0 Vcc";
54		regulator-min-microvolt = <3300000>;
55		regulator-max-microvolt = <3300000>;
56		regulator-always-on;
57	};
58
59	vccq_sdhi0: regulator-vccq-sdhi0 {
60		compatible = "regulator-gpio";
61
62		regulator-name = "SDHI0 VccQ";
63		regulator-min-microvolt = <1800000>;
64		regulator-max-microvolt = <3300000>;
65
66		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
67		gpios-states = <1>;
68		states = <3300000 1>, <1800000 0>;
69	};
70
71	vcc_sdhi2: regulator-vcc-sdhi2 {
72		compatible = "regulator-fixed";
73
74		regulator-name = "SDHI2 Vcc";
75		regulator-min-microvolt = <3300000>;
76		regulator-max-microvolt = <3300000>;
77		regulator-always-on;
78	};
79
80	vccq_sdhi2: regulator-vccq-sdhi2 {
81		compatible = "regulator-gpio";
82
83		regulator-name = "SDHI2 VccQ";
84		regulator-min-microvolt = <1800000>;
85		regulator-max-microvolt = <3300000>;
86
87		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
88		gpios-states = <1>;
89		states = <3300000 1>, <1800000 0>;
90	};
91
92	hdmi-out {
93		compatible = "hdmi-connector";
94		type = "a";
95
96		port {
97			hdmi_con: endpoint {
98				remote-endpoint = <&adv7511_out>;
99			};
100		};
101	};
102
103	x3_clk: x3-clock {
104		compatible = "fixed-clock";
105		#clock-cells = <0>;
106		clock-frequency = <148500000>;
107	};
108
109	x16_clk: x16-clock {
110		compatible = "fixed-clock";
111		#clock-cells = <0>;
112		clock-frequency = <74250000>;
113	};
114
115	x14_clk: audio_clock {
116		compatible = "fixed-clock";
117		#clock-cells = <0>;
118		clock-frequency = <11289600>;
119	};
120
121	sound {
122		compatible = "simple-audio-card";
123
124		simple-audio-card,format = "left_j";
125		simple-audio-card,bitclock-master = <&soundcodec>;
126		simple-audio-card,frame-master = <&soundcodec>;
127
128		simple-audio-card,cpu {
129			sound-dai = <&rcar_sound>;
130		};
131
132		soundcodec: simple-audio-card,codec {
133			sound-dai = <&ak4642>;
134			clocks = <&x14_clk>;
135		};
136	};
137
138	gpioi2c2: i2c-9 {
139		#address-cells = <1>;
140		#size-cells = <0>;
141		compatible = "i2c-gpio";
142		status = "disabled";
143		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
144		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
145		i2c-gpio,delay-us = <5>;
146	};
147
148	/*
149	 * A fallback to GPIO is provided for I2C2.
150	 */
151	i2chdmi: i2c-10 {
152		compatible = "i2c-demux-pinctrl";
153		i2c-parent = <&i2c2>, <&gpioi2c2>;
154		i2c-bus-name = "i2c-hdmi";
155		#address-cells = <1>;
156		#size-cells = <0>;
157
158		ak4642: codec@12 {
159			compatible = "asahi-kasei,ak4642";
160			#sound-dai-cells = <0>;
161			reg = <0x12>;
162		};
163
164		composite-in@20 {
165			compatible = "adi,adv7180";
166			reg = <0x20>;
167
168			port {
169				adv7180: endpoint {
170					bus-width = <8>;
171					remote-endpoint = <&vin0ep>;
172				};
173			};
174		};
175
176		hdmi@39 {
177			compatible = "adi,adv7511w";
178			reg = <0x39>;
179			interrupt-parent = <&gpio3>;
180			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
181
182			adi,input-depth = <8>;
183			adi,input-colorspace = "rgb";
184			adi,input-clock = "1x";
185
186			ports {
187				#address-cells = <1>;
188				#size-cells = <0>;
189
190				port@0 {
191					reg = <0>;
192					adv7511_in: endpoint {
193						remote-endpoint = <&du_out_rgb>;
194					};
195				};
196
197				port@1 {
198					reg = <1>;
199					adv7511_out: endpoint {
200						remote-endpoint = <&hdmi_con>;
201					};
202				};
203			};
204		};
205	};
206};
207
208&extal_clk {
209	clock-frequency = <20000000>;
210};
211
212&pfc {
213	scif0_pins: scif0 {
214		groups = "scif0_data_d";
215		function = "scif0";
216	};
217
218	ether_pins: ether {
219		groups = "eth_link", "eth_mdio", "eth_rmii";
220		function = "eth";
221	};
222
223	phy1_pins: phy1 {
224		groups = "intc_irq0";
225		function = "intc";
226	};
227
228	pmic_irq_pins: pmicirq {
229		groups = "intc_irq2";
230		function = "intc";
231	};
232
233	sdhi0_pins: sd0 {
234		groups = "sdhi0_data4", "sdhi0_ctrl";
235		function = "sdhi0";
236	};
237
238	sdhi2_pins: sd2 {
239		groups = "sdhi2_data4", "sdhi2_ctrl";
240		function = "sdhi2";
241	};
242
243	qspi_pins: qspi {
244		groups = "qspi_ctrl", "qspi_data4";
245		function = "qspi";
246	};
247
248	i2c2_pins: i2c2 {
249		groups = "i2c2";
250		function = "i2c2";
251	};
252
253	usb0_pins: usb0 {
254		groups = "usb0";
255		function = "usb0";
256	};
257
258	usb1_pins: usb1 {
259		groups = "usb1";
260		function = "usb1";
261	};
262
263	vin0_pins: vin0 {
264		groups = "vin0_data8", "vin0_clk";
265		function = "vin0";
266	};
267
268	can0_pins: can0 {
269		groups = "can0_data";
270		function = "can0";
271	};
272
273	du_pins: du {
274		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
275		function = "du";
276	};
277
278	ssi_pins: sound {
279		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
280		function = "ssi";
281	};
282
283	audio_clk_pins: audio_clk {
284		groups = "audio_clk_a";
285		function = "audio_clk";
286	};
287};
288
289&scif0 {
290	pinctrl-0 = <&scif0_pins>;
291	pinctrl-names = "default";
292
293	status = "okay";
294};
295
296&ether {
297	pinctrl-0 = <&ether_pins &phy1_pins>;
298	pinctrl-names = "default";
299
300	phy-handle = <&phy1>;
301	renesas,ether-link-active-low;
302	status = "okay";
303
304	phy1: ethernet-phy@1 {
305		reg = <1>;
306		interrupt-parent = <&irqc0>;
307		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
308		micrel,led-mode = <1>;
309		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
310	};
311};
312
313&sdhi0 {
314	pinctrl-0 = <&sdhi0_pins>;
315	pinctrl-names = "default";
316
317	vmmc-supply = <&vcc_sdhi0>;
318	vqmmc-supply = <&vccq_sdhi0>;
319	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
320	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
321	status = "okay";
322};
323
324&sdhi2 {
325	pinctrl-0 = <&sdhi2_pins>;
326	pinctrl-names = "default";
327
328	vmmc-supply = <&vcc_sdhi2>;
329	vqmmc-supply = <&vccq_sdhi2>;
330	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
331	status = "okay";
332};
333
334&qspi {
335	pinctrl-0 = <&qspi_pins>;
336	pinctrl-names = "default";
337
338	status = "okay";
339
340	flash@0 {
341		compatible = "spansion,s25fl512s", "jedec,spi-nor";
342		reg = <0>;
343		spi-max-frequency = <30000000>;
344		spi-tx-bus-width = <4>;
345		spi-rx-bus-width = <4>;
346		m25p,fast-read;
347
348		partitions {
349			compatible = "fixed-partitions";
350			#address-cells = <1>;
351			#size-cells = <1>;
352
353			partition@0 {
354				label = "loader_prg";
355				reg = <0x00000000 0x00040000>;
356				read-only;
357			};
358			partition@40000 {
359				label = "user_prg";
360				reg = <0x00040000 0x00400000>;
361				read-only;
362			};
363			partition@440000 {
364				label = "flash_fs";
365				reg = <0x00440000 0x03bc0000>;
366			};
367		};
368	};
369};
370
371&i2c2 {
372	pinctrl-0 = <&i2c2_pins>;
373	pinctrl-names = "i2c-hdmi";
374
375	clock-frequency = <400000>;
376};
377
378&i2c6 {
379	pinctrl-names = "default";
380	pinctrl-0 = <&pmic_irq_pins>;
381	status = "okay";
382	clock-frequency = <100000>;
383
384	pmic@5a {
385		compatible = "dlg,da9063l";
386		reg = <0x5a>;
387		interrupt-parent = <&irqc0>;
388		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
389		interrupt-controller;
390
391		wdt {
392			compatible = "dlg,da9063-watchdog";
393		};
394	};
395
396	vdd_dvfs: regulator@68 {
397		compatible = "dlg,da9210";
398		reg = <0x68>;
399		interrupt-parent = <&irqc0>;
400		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
401
402		regulator-min-microvolt = <1000000>;
403		regulator-max-microvolt = <1000000>;
404		regulator-boot-on;
405		regulator-always-on;
406	};
407};
408
409&sata0 {
410	status = "okay";
411};
412
413&cpu0 {
414	cpu0-supply = <&vdd_dvfs>;
415};
416
417/* composite video input */
418&vin0 {
419	status = "okay";
420	pinctrl-0 = <&vin0_pins>;
421	pinctrl-names = "default";
422
423	port {
424		vin0ep: endpoint {
425			remote-endpoint = <&adv7180>;
426			bus-width = <8>;
427		};
428	};
429};
430
431&pci0 {
432	pinctrl-0 = <&usb0_pins>;
433	pinctrl-names = "default";
434
435	status = "okay";
436};
437
438&pci1 {
439	pinctrl-0 = <&usb1_pins>;
440	pinctrl-names = "default";
441
442	status = "okay";
443};
444
445&hsusb {
446	pinctrl-0 = <&usb0_pins>;
447	pinctrl-names = "default";
448
449	status = "okay";
450};
451
452&usbphy {
453	status = "okay";
454};
455
456&pcie_bus_clk {
457	clock-frequency = <100000000>;
458};
459
460&pciec {
461	status = "okay";
462};
463
464&can0 {
465	pinctrl-0 = <&can0_pins>;
466	pinctrl-names = "default";
467
468	status = "okay";
469};
470
471&du {
472	pinctrl-0 = <&du_pins>;
473	pinctrl-names = "default";
474	status = "okay";
475
476	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
477		 <&x3_clk>, <&x16_clk>;
478	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
479
480	ports {
481		port@0 {
482			endpoint {
483				remote-endpoint = <&adv7511_in>;
484			};
485		};
486	};
487};
488
489&lvds0 {
490	ports {
491		port@1 {
492			lvds_connector: endpoint {
493			};
494		};
495	};
496};
497
498&rcar_sound {
499	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
500	pinctrl-names = "default";
501	status = "okay";
502
503	/* Single DAI */
504	#sound-dai-cells = <0>;
505
506	rcar_sound,dai {
507		dai0 {
508			playback = <&ssi0>;
509			capture  = <&ssi1>;
510		};
511	};
512};
513
514&rwdt {
515	timeout-sec = <60>;
516	status = "okay";
517};
518
519&ssi1 {
520	shared-pin;
521};
522