1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * DTS file for SPEAr320 SoC 4 * 5 * Copyright 2012 Viresh Kumar <vireshk@kernel.org> 6 */ 7 8/include/ "spear3xx.dtsi" 9 10/ { 11 ahb { 12 #address-cells = <1>; 13 #size-cells = <1>; 14 compatible = "simple-bus"; 15 ranges = <0x40000000 0x40000000 0x80000000 16 0xd0000000 0xd0000000 0x30000000>; 17 18 pinmux: pinmux@b3000000 { 19 compatible = "st,spear320-pinmux"; 20 reg = <0xb3000000 0x1000>; 21 #gpio-range-cells = <3>; 22 }; 23 24 clcd@90000000 { 25 compatible = "arm,pl110", "arm,primecell"; 26 reg = <0x90000000 0x1000>; 27 interrupts = <8>; 28 interrupt-parent = <&shirq>; 29 status = "disabled"; 30 }; 31 32 fsmc: flash@4c000000 { 33 compatible = "st,spear600-fsmc-nand"; 34 #address-cells = <1>; 35 #size-cells = <1>; 36 reg = <0x4c000000 0x1000 /* FSMC Register */ 37 0x50000000 0x0010 /* NAND Base DATA */ 38 0x50020000 0x0010 /* NAND Base ADDR */ 39 0x50010000 0x0010>; /* NAND Base CMD */ 40 reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; 41 status = "disabled"; 42 }; 43 44 sdhci@70000000 { 45 compatible = "st,sdhci-spear"; 46 reg = <0x70000000 0x100>; 47 interrupts = <10>; 48 interrupt-parent = <&shirq>; 49 status = "disabled"; 50 }; 51 52 shirq: interrupt-controller@0xb3000000 { 53 compatible = "st,spear320-shirq"; 54 reg = <0xb3000000 0x1000>; 55 interrupts = <30 28 29 1>; 56 #interrupt-cells = <1>; 57 interrupt-controller; 58 }; 59 60 spi1: spi@a5000000 { 61 compatible = "arm,pl022", "arm,primecell"; 62 reg = <0xa5000000 0x1000>; 63 interrupts = <15>; 64 interrupt-parent = <&shirq>; 65 #address-cells = <1>; 66 #size-cells = <0>; 67 status = "disabled"; 68 }; 69 70 spi2: spi@a6000000 { 71 compatible = "arm,pl022", "arm,primecell"; 72 reg = <0xa6000000 0x1000>; 73 interrupts = <16>; 74 interrupt-parent = <&shirq>; 75 #address-cells = <1>; 76 #size-cells = <0>; 77 status = "disabled"; 78 }; 79 80 pwm: pwm@a8000000 { 81 compatible ="st,spear-pwm"; 82 reg = <0xa8000000 0x1000>; 83 #pwm-cells = <2>; 84 status = "disabled"; 85 }; 86 87 apb { 88 #address-cells = <1>; 89 #size-cells = <1>; 90 compatible = "simple-bus"; 91 ranges = <0xa0000000 0xa0000000 0x20000000 92 0xd0000000 0xd0000000 0x30000000>; 93 94 i2c1: i2c@a7000000 { 95 #address-cells = <1>; 96 #size-cells = <0>; 97 compatible = "snps,designware-i2c"; 98 reg = <0xa7000000 0x1000>; 99 interrupts = <21>; 100 interrupt-parent = <&shirq>; 101 status = "disabled"; 102 }; 103 104 serial@a3000000 { 105 compatible = "arm,pl011", "arm,primecell"; 106 reg = <0xa3000000 0x1000>; 107 interrupts = <13>; 108 interrupt-parent = <&shirq>; 109 status = "disabled"; 110 }; 111 112 serial@a4000000 { 113 compatible = "arm,pl011", "arm,primecell"; 114 reg = <0xa4000000 0x1000>; 115 interrupts = <14>; 116 interrupt-parent = <&shirq>; 117 status = "disabled"; 118 }; 119 120 gpiopinctrl: gpio@b3000000 { 121 compatible = "st,spear-plgpio"; 122 reg = <0xb3000000 0x1000>; 123 #interrupt-cells = <1>; 124 interrupt-controller; 125 gpio-controller; 126 #gpio-cells = <2>; 127 gpio-ranges = <&pinmux 0 0 102>; 128 status = "disabled"; 129 130 st-plgpio,ngpio = <102>; 131 st-plgpio,enb-reg = <0x24>; 132 st-plgpio,wdata-reg = <0x34>; 133 st-plgpio,dir-reg = <0x44>; 134 st-plgpio,ie-reg = <0x64>; 135 st-plgpio,rdata-reg = <0x54>; 136 st-plgpio,mis-reg = <0x84>; 137 st-plgpio,eit-reg = <0x94>; 138 }; 139 }; 140 }; 141}; 142