1// SPDX-License-Identifier: (GPL-2.0 OR MIT) 2// 3// Device Tree file for LX2160ARDB 4// 5// Copyright 2018 NXP 6 7/dts-v1/; 8 9#include "fsl-lx2160a.dtsi" 10 11/ { 12 model = "NXP Layerscape LX2160ARDB"; 13 compatible = "fsl,lx2160a-rdb", "fsl,lx2160a"; 14 15 aliases { 16 crypto = &crypto; 17 serial0 = &uart0; 18 }; 19 20 chosen { 21 stdout-path = "serial0:115200n8"; 22 }; 23 24 sb_3v3: regulator-sb3v3 { 25 compatible = "regulator-fixed"; 26 regulator-name = "MC34717-3.3VSB"; 27 regulator-min-microvolt = <3300000>; 28 regulator-max-microvolt = <3300000>; 29 regulator-boot-on; 30 regulator-always-on; 31 }; 32}; 33 34&crypto { 35 status = "okay"; 36}; 37 38&dpmac17 { 39 phy-handle = <&rgmii_phy1>; 40 phy-connection-type = "rgmii-id"; 41}; 42 43&dpmac18 { 44 phy-handle = <&rgmii_phy2>; 45 phy-connection-type = "rgmii-id"; 46}; 47 48&emdio1 { 49 status = "okay"; 50 51 rgmii_phy1: ethernet-phy@1 { 52 /* AR8035 PHY */ 53 compatible = "ethernet-phy-id004d.d072"; 54 reg = <0x1>; 55 eee-broken-1000t; 56 }; 57 58 rgmii_phy2: ethernet-phy@2 { 59 /* AR8035 PHY */ 60 compatible = "ethernet-phy-id004d.d072"; 61 reg = <0x2>; 62 eee-broken-1000t; 63 }; 64}; 65 66&esdhc0 { 67 sd-uhs-sdr104; 68 sd-uhs-sdr50; 69 sd-uhs-sdr25; 70 sd-uhs-sdr12; 71 status = "okay"; 72}; 73 74&esdhc1 { 75 mmc-hs200-1_8v; 76 mmc-hs400-1_8v; 77 bus-width = <8>; 78 status = "okay"; 79}; 80 81&fspi { 82 status = "okay"; 83 84 mt35xu512aba0: flash@0 { 85 #address-cells = <1>; 86 #size-cells = <1>; 87 compatible = "jedec,spi-nor"; 88 m25p,fast-read; 89 spi-max-frequency = <50000000>; 90 reg = <0>; 91 spi-rx-bus-width = <8>; 92 spi-tx-bus-width = <8>; 93 }; 94 95 mt35xu512aba1: flash@1 { 96 #address-cells = <1>; 97 #size-cells = <1>; 98 compatible = "jedec,spi-nor"; 99 m25p,fast-read; 100 spi-max-frequency = <50000000>; 101 reg = <1>; 102 spi-rx-bus-width = <8>; 103 spi-tx-bus-width = <8>; 104 }; 105}; 106 107&i2c0 { 108 status = "okay"; 109 110 i2c-mux@77 { 111 compatible = "nxp,pca9547"; 112 reg = <0x77>; 113 #address-cells = <1>; 114 #size-cells = <0>; 115 116 i2c@2 { 117 #address-cells = <1>; 118 #size-cells = <0>; 119 reg = <0x2>; 120 121 power-monitor@40 { 122 compatible = "ti,ina220"; 123 reg = <0x40>; 124 shunt-resistor = <500>; 125 }; 126 }; 127 128 i2c@3 { 129 #address-cells = <1>; 130 #size-cells = <0>; 131 reg = <0x3>; 132 133 temperature-sensor@4c { 134 compatible = "nxp,sa56004"; 135 reg = <0x4c>; 136 vcc-supply = <&sb_3v3>; 137 }; 138 139 temperature-sensor@4d { 140 compatible = "nxp,sa56004"; 141 reg = <0x4d>; 142 vcc-supply = <&sb_3v3>; 143 }; 144 }; 145 }; 146}; 147 148&i2c4 { 149 status = "okay"; 150 151 rtc@51 { 152 compatible = "nxp,pcf2129"; 153 reg = <0x51>; 154 // IRQ10_B 155 interrupts = <0 150 0x4>; 156 }; 157}; 158 159&sata0 { 160 status = "okay"; 161}; 162 163&sata1 { 164 status = "okay"; 165}; 166 167&sata2 { 168 status = "okay"; 169}; 170 171&sata3 { 172 status = "okay"; 173}; 174 175&uart0 { 176 status = "okay"; 177}; 178 179&uart1 { 180 status = "okay"; 181}; 182 183&usb0 { 184 status = "okay"; 185}; 186 187&usb1 { 188 status = "okay"; 189}; 190