• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3     TDA10021  - Single Chip Cable Channel Receiver driver module
4 	       used on the Siemens DVB-C cards
5 
6     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
7     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
8 		   Support for TDA10021
9 
10 */
11 
12 #include <linux/delay.h>
13 #include <linux/errno.h>
14 #include <linux/init.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/string.h>
18 #include <linux/slab.h>
19 
20 #include <media/dvb_frontend.h>
21 #include "tda1002x.h"
22 
23 
24 struct tda10021_state {
25 	struct i2c_adapter* i2c;
26 	/* configuration settings */
27 	const struct tda1002x_config* config;
28 	struct dvb_frontend frontend;
29 
30 	u8 pwm;
31 	u8 reg0;
32 };
33 
34 
35 #if 0
36 #define dprintk(x...) printk(x)
37 #else
38 #define dprintk(x...)
39 #endif
40 
41 static int verbose;
42 
43 #define XIN 57840000UL
44 
45 #define FIN (XIN >> 4)
46 
47 static int tda10021_inittab_size = 0x40;
48 static u8 tda10021_inittab[0x40]=
49 {
50 	0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a,
51 	0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40,
52 	0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff,
53 	0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00,
54 	0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00,
55 	0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58,
56 	0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00,
57 	0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00,
58 };
59 
_tda10021_writereg(struct tda10021_state * state,u8 reg,u8 data)60 static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
61 {
62 	u8 buf[] = { reg, data };
63 	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
64 	int ret;
65 
66 	ret = i2c_transfer (state->i2c, &msg, 1);
67 	if (ret != 1)
68 		printk("DVB: TDA10021(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
69 			state->frontend.dvb->num, __func__, reg, data, ret);
70 
71 	msleep(10);
72 	return (ret != 1) ? -EREMOTEIO : 0;
73 }
74 
tda10021_readreg(struct tda10021_state * state,u8 reg)75 static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
76 {
77 	u8 b0 [] = { reg };
78 	u8 b1 [] = { 0 };
79 	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
80 				  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
81 	int ret;
82 
83 	ret = i2c_transfer (state->i2c, msg, 2);
84 	// Don't print an error message if the id is read.
85 	if (ret != 2 && reg != 0x1a)
86 		printk("DVB: TDA10021: %s: readreg error (ret == %i)\n",
87 				__func__, ret);
88 	return b1[0];
89 }
90 
91 //get access to tuner
lock_tuner(struct tda10021_state * state)92 static int lock_tuner(struct tda10021_state* state)
93 {
94 	u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] | 0x80 };
95 	struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
96 
97 	if(i2c_transfer(state->i2c, &msg, 1) != 1)
98 	{
99 		printk("tda10021: lock tuner fails\n");
100 		return -EREMOTEIO;
101 	}
102 	return 0;
103 }
104 
105 //release access from tuner
unlock_tuner(struct tda10021_state * state)106 static int unlock_tuner(struct tda10021_state* state)
107 {
108 	u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] & 0x7f };
109 	struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
110 
111 	if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
112 	{
113 		printk("tda10021: unlock tuner fails\n");
114 		return -EREMOTEIO;
115 	}
116 	return 0;
117 }
118 
tda10021_setup_reg0(struct tda10021_state * state,u8 reg0,enum fe_spectral_inversion inversion)119 static int tda10021_setup_reg0(struct tda10021_state *state, u8 reg0,
120 			       enum fe_spectral_inversion inversion)
121 {
122 	reg0 |= state->reg0 & 0x63;
123 
124 	if ((INVERSION_ON == inversion) ^ (state->config->invert == 0))
125 		reg0 &= ~0x20;
126 	else
127 		reg0 |= 0x20;
128 
129 	_tda10021_writereg (state, 0x00, reg0 & 0xfe);
130 	_tda10021_writereg (state, 0x00, reg0 | 0x01);
131 
132 	state->reg0 = reg0;
133 	return 0;
134 }
135 
tda10021_set_symbolrate(struct tda10021_state * state,u32 symbolrate)136 static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate)
137 {
138 	s32 BDR;
139 	s32 BDRI;
140 	s16 SFIL = 0;
141 	u16 NDEC = 0;
142 	u32 tmp, ratio;
143 
144 	if (symbolrate > XIN / 2)
145 		symbolrate = XIN / 2;
146 	else if (symbolrate < 500000)
147 		symbolrate = 500000;
148 
149 	if (symbolrate < XIN / 16)
150 		NDEC = 1;
151 	if (symbolrate < XIN / 32)
152 		NDEC = 2;
153 	if (symbolrate < XIN / 64)
154 		NDEC = 3;
155 
156 	if (symbolrate < XIN * 10 / 123)
157 		SFIL = 1;
158 	if (symbolrate < XIN * 10 / 160)
159 		SFIL = 0;
160 	if (symbolrate < XIN * 10 / 246)
161 		SFIL = 1;
162 	if (symbolrate < XIN * 10 / 320)
163 		SFIL = 0;
164 	if (symbolrate < XIN * 10 / 492)
165 		SFIL = 1;
166 	if (symbolrate < XIN * 10 / 640)
167 		SFIL = 0;
168 	if (symbolrate < XIN * 10 / 984)
169 		SFIL = 1;
170 
171 	symbolrate <<= NDEC;
172 	ratio = (symbolrate << 4) / FIN;
173 	tmp =  ((symbolrate << 4) % FIN) << 8;
174 	ratio = (ratio << 8) + tmp / FIN;
175 	tmp = (tmp % FIN) << 8;
176 	ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, FIN);
177 
178 	BDR = ratio;
179 	BDRI = (((XIN << 5) / symbolrate) + 1) / 2;
180 
181 	if (BDRI > 0xFF)
182 		BDRI = 0xFF;
183 
184 	SFIL = (SFIL << 4) | tda10021_inittab[0x0E];
185 
186 	NDEC = (NDEC << 6) | tda10021_inittab[0x03];
187 
188 	_tda10021_writereg (state, 0x03, NDEC);
189 	_tda10021_writereg (state, 0x0a, BDR&0xff);
190 	_tda10021_writereg (state, 0x0b, (BDR>> 8)&0xff);
191 	_tda10021_writereg (state, 0x0c, (BDR>>16)&0x3f);
192 
193 	_tda10021_writereg (state, 0x0d, BDRI);
194 	_tda10021_writereg (state, 0x0e, SFIL);
195 
196 	return 0;
197 }
198 
tda10021_init(struct dvb_frontend * fe)199 static int tda10021_init (struct dvb_frontend *fe)
200 {
201 	struct tda10021_state* state = fe->demodulator_priv;
202 	int i;
203 
204 	dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num);
205 
206 	//_tda10021_writereg (fe, 0, 0);
207 
208 	for (i=0; i<tda10021_inittab_size; i++)
209 		_tda10021_writereg (state, i, tda10021_inittab[i]);
210 
211 	_tda10021_writereg (state, 0x34, state->pwm);
212 
213 	//Comment by markus
214 	//0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0)
215 	//0x2A[4] == BYPPLL -> Power down mode (default 1)
216 	//0x2A[5] == LCK -> PLL Lock Flag
217 	//0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0)
218 
219 	//Activate PLL
220 	_tda10021_writereg(state, 0x2a, tda10021_inittab[0x2a] & 0xef);
221 	return 0;
222 }
223 
224 struct qam_params {
225 	u8 conf, agcref, lthr, mseth, aref;
226 };
227 
tda10021_set_parameters(struct dvb_frontend * fe)228 static int tda10021_set_parameters(struct dvb_frontend *fe)
229 {
230 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
231 	u32 delsys  = c->delivery_system;
232 	unsigned qam = c->modulation;
233 	bool is_annex_c;
234 	u32 reg0x3d;
235 	struct tda10021_state* state = fe->demodulator_priv;
236 	static const struct qam_params qam_params[] = {
237 		/* Modulation  Conf  AGCref  LTHR  MSETH  AREF */
238 		[QPSK]	   = { 0x14, 0x78,   0x78, 0x8c,  0x96 },
239 		[QAM_16]   = { 0x00, 0x8c,   0x87, 0xa2,  0x91 },
240 		[QAM_32]   = { 0x04, 0x8c,   0x64, 0x74,  0x96 },
241 		[QAM_64]   = { 0x08, 0x6a,   0x46, 0x43,  0x6a },
242 		[QAM_128]  = { 0x0c, 0x78,   0x36, 0x34,  0x7e },
243 		[QAM_256]  = { 0x10, 0x5c,   0x26, 0x23,  0x6b },
244 	};
245 
246 	switch (delsys) {
247 	case SYS_DVBC_ANNEX_A:
248 		is_annex_c = false;
249 		break;
250 	case SYS_DVBC_ANNEX_C:
251 		is_annex_c = true;
252 		break;
253 	default:
254 		return -EINVAL;
255 	}
256 
257 	/*
258 	 * gcc optimizes the code below the same way as it would code:
259 	 *           "if (qam > 5) return -EINVAL;"
260 	 * Yet, the code is clearer, as it shows what QAM standards are
261 	 * supported by the driver, and avoids the usage of magic numbers on
262 	 * it.
263 	 */
264 	switch (qam) {
265 	case QPSK:
266 	case QAM_16:
267 	case QAM_32:
268 	case QAM_64:
269 	case QAM_128:
270 	case QAM_256:
271 		break;
272 	default:
273 		return -EINVAL;
274 	}
275 
276 	if (c->inversion != INVERSION_ON && c->inversion != INVERSION_OFF)
277 		return -EINVAL;
278 
279 	/*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/
280 
281 	if (fe->ops.tuner_ops.set_params) {
282 		fe->ops.tuner_ops.set_params(fe);
283 		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
284 	}
285 
286 	tda10021_set_symbolrate(state, c->symbol_rate);
287 	_tda10021_writereg(state, 0x34, state->pwm);
288 
289 	_tda10021_writereg(state, 0x01, qam_params[qam].agcref);
290 	_tda10021_writereg(state, 0x05, qam_params[qam].lthr);
291 	_tda10021_writereg(state, 0x08, qam_params[qam].mseth);
292 	_tda10021_writereg(state, 0x09, qam_params[qam].aref);
293 
294 	/*
295 	 * Bit 0 == 0 means roll-off = 0.15 (Annex A)
296 	 *	 == 1 means roll-off = 0.13 (Annex C)
297 	 */
298 	reg0x3d = tda10021_readreg (state, 0x3d);
299 	if (is_annex_c)
300 		_tda10021_writereg (state, 0x3d, 0x01 | reg0x3d);
301 	else
302 		_tda10021_writereg (state, 0x3d, 0xfe & reg0x3d);
303 	tda10021_setup_reg0(state, qam_params[qam].conf, c->inversion);
304 
305 	return 0;
306 }
307 
tda10021_read_status(struct dvb_frontend * fe,enum fe_status * status)308 static int tda10021_read_status(struct dvb_frontend *fe,
309 				enum fe_status *status)
310 {
311 	struct tda10021_state* state = fe->demodulator_priv;
312 	int sync;
313 
314 	*status = 0;
315 	//0x11[0] == EQALGO -> Equalizer algorithms state
316 	//0x11[1] == CARLOCK -> Carrier locked
317 	//0x11[2] == FSYNC -> Frame synchronisation
318 	//0x11[3] == FEL -> Front End locked
319 	//0x11[6] == NODVB -> DVB Mode Information
320 	sync = tda10021_readreg (state, 0x11);
321 
322 	if (sync & 2)
323 		*status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
324 
325 	if (sync & 4)
326 		*status |= FE_HAS_SYNC|FE_HAS_VITERBI;
327 
328 	if (sync & 8)
329 		*status |= FE_HAS_LOCK;
330 
331 	return 0;
332 }
333 
tda10021_read_ber(struct dvb_frontend * fe,u32 * ber)334 static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
335 {
336 	struct tda10021_state* state = fe->demodulator_priv;
337 
338 	u32 _ber = tda10021_readreg(state, 0x14) |
339 		(tda10021_readreg(state, 0x15) << 8) |
340 		((tda10021_readreg(state, 0x16) & 0x0f) << 16);
341 	_tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
342 					| (tda10021_inittab[0x10] & 0xc0));
343 	*ber = 10 * _ber;
344 
345 	return 0;
346 }
347 
tda10021_read_signal_strength(struct dvb_frontend * fe,u16 * strength)348 static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
349 {
350 	struct tda10021_state* state = fe->demodulator_priv;
351 
352 	u8 config = tda10021_readreg(state, 0x02);
353 	u8 gain = tda10021_readreg(state, 0x17);
354 	if (config & 0x02)
355 		/* the agc value is inverted */
356 		gain = ~gain;
357 	*strength = (gain << 8) | gain;
358 
359 	return 0;
360 }
361 
tda10021_read_snr(struct dvb_frontend * fe,u16 * snr)362 static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr)
363 {
364 	struct tda10021_state* state = fe->demodulator_priv;
365 
366 	u8 quality = ~tda10021_readreg(state, 0x18);
367 	*snr = (quality << 8) | quality;
368 
369 	return 0;
370 }
371 
tda10021_read_ucblocks(struct dvb_frontend * fe,u32 * ucblocks)372 static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
373 {
374 	struct tda10021_state* state = fe->demodulator_priv;
375 
376 	*ucblocks = tda10021_readreg (state, 0x13) & 0x7f;
377 	if (*ucblocks == 0x7f)
378 		*ucblocks = 0xffffffff;
379 
380 	/* reset uncorrected block counter */
381 	_tda10021_writereg (state, 0x10, tda10021_inittab[0x10] & 0xdf);
382 	_tda10021_writereg (state, 0x10, tda10021_inittab[0x10]);
383 
384 	return 0;
385 }
386 
tda10021_get_frontend(struct dvb_frontend * fe,struct dtv_frontend_properties * p)387 static int tda10021_get_frontend(struct dvb_frontend *fe,
388 				 struct dtv_frontend_properties *p)
389 {
390 	struct tda10021_state* state = fe->demodulator_priv;
391 	int sync;
392 	s8 afc = 0;
393 
394 	sync = tda10021_readreg(state, 0x11);
395 	afc = tda10021_readreg(state, 0x19);
396 	if (verbose) {
397 		/* AFC only valid when carrier has been recovered */
398 		printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" :
399 				  "DVB: TDA10021(%d): [AFC (%d) %dHz]\n",
400 			state->frontend.dvb->num, afc,
401 		       -((s32)p->symbol_rate * afc) >> 10);
402 	}
403 
404 	p->inversion = ((state->reg0 & 0x20) == 0x20) ^ (state->config->invert != 0) ? INVERSION_ON : INVERSION_OFF;
405 	p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
406 
407 	p->fec_inner = FEC_NONE;
408 	p->frequency = ((p->frequency + 31250) / 62500) * 62500;
409 
410 	if (sync & 2)
411 		p->frequency -= ((s32)p->symbol_rate * afc) >> 10;
412 
413 	return 0;
414 }
415 
tda10021_i2c_gate_ctrl(struct dvb_frontend * fe,int enable)416 static int tda10021_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
417 {
418 	struct tda10021_state* state = fe->demodulator_priv;
419 
420 	if (enable) {
421 		lock_tuner(state);
422 	} else {
423 		unlock_tuner(state);
424 	}
425 	return 0;
426 }
427 
tda10021_sleep(struct dvb_frontend * fe)428 static int tda10021_sleep(struct dvb_frontend* fe)
429 {
430 	struct tda10021_state* state = fe->demodulator_priv;
431 
432 	_tda10021_writereg (state, 0x1b, 0x02);  /* pdown ADC */
433 	_tda10021_writereg (state, 0x00, 0x80);  /* standby */
434 
435 	return 0;
436 }
437 
tda10021_release(struct dvb_frontend * fe)438 static void tda10021_release(struct dvb_frontend* fe)
439 {
440 	struct tda10021_state* state = fe->demodulator_priv;
441 	kfree(state);
442 }
443 
444 static const struct dvb_frontend_ops tda10021_ops;
445 
tda10021_attach(const struct tda1002x_config * config,struct i2c_adapter * i2c,u8 pwm)446 struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
447 				     struct i2c_adapter* i2c,
448 				     u8 pwm)
449 {
450 	struct tda10021_state* state = NULL;
451 	u8 id;
452 
453 	/* allocate memory for the internal state */
454 	state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
455 	if (state == NULL) goto error;
456 
457 	/* setup the state */
458 	state->config = config;
459 	state->i2c = i2c;
460 	state->pwm = pwm;
461 	state->reg0 = tda10021_inittab[0];
462 
463 	/* check if the demod is there */
464 	id = tda10021_readreg(state, 0x1a);
465 	if ((id & 0xf0) != 0x70) goto error;
466 
467 	/* Don't claim TDA10023 */
468 	if (id == 0x7d)
469 		goto error;
470 
471 	printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
472 	       state->config->demod_address, id);
473 
474 	/* create dvb_frontend */
475 	memcpy(&state->frontend.ops, &tda10021_ops, sizeof(struct dvb_frontend_ops));
476 	state->frontend.demodulator_priv = state;
477 	return &state->frontend;
478 
479 error:
480 	kfree(state);
481 	return NULL;
482 }
483 
484 static const struct dvb_frontend_ops tda10021_ops = {
485 	.delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C },
486 	.info = {
487 		.name = "Philips TDA10021 DVB-C",
488 		.frequency_min_hz =  47 * MHz,
489 		.frequency_max_hz = 862 * MHz,
490 		.frequency_stepsize_hz = 62500,
491 		.symbol_rate_min = (XIN / 2) / 64,     /* SACLK/64 == (XIN/2)/64 */
492 		.symbol_rate_max = (XIN / 2) / 4,      /* SACLK/4 */
493 	#if 0
494 		.frequency_tolerance = ???,
495 		.symbol_rate_tolerance = ???,  /* ppm */  /* == 8% (spec p. 5) */
496 	#endif
497 		.caps = 0x400 | //FE_CAN_QAM_4
498 			FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
499 			FE_CAN_QAM_128 | FE_CAN_QAM_256 |
500 			FE_CAN_FEC_AUTO
501 	},
502 
503 	.release = tda10021_release,
504 
505 	.init = tda10021_init,
506 	.sleep = tda10021_sleep,
507 	.i2c_gate_ctrl = tda10021_i2c_gate_ctrl,
508 
509 	.set_frontend = tda10021_set_parameters,
510 	.get_frontend = tda10021_get_frontend,
511 
512 	.read_status = tda10021_read_status,
513 	.read_ber = tda10021_read_ber,
514 	.read_signal_strength = tda10021_read_signal_strength,
515 	.read_snr = tda10021_read_snr,
516 	.read_ucblocks = tda10021_read_ucblocks,
517 };
518 
519 module_param(verbose, int, 0644);
520 MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
521 
522 MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver");
523 MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz");
524 MODULE_LICENSE("GPL");
525 
526 EXPORT_SYMBOL(tda10021_attach);
527