1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2019 Baylibre, SAS.
3 * Author: Jerome Brunet <jbrunet@baylibre.com>
4 */
5
6 #include <linux/bitfield.h>
7 #include <linux/clk.h>
8 #include <linux/clk-provider.h>
9 #include <linux/device.h>
10 #include <linux/io.h>
11 #include <linux/iopoll.h>
12 #include <linux/mdio-mux.h>
13 #include <linux/module.h>
14 #include <linux/phy.h>
15 #include <linux/platform_device.h>
16
17 #define ETH_PLL_STS 0x40
18 #define ETH_PLL_CTL0 0x44
19 #define PLL_CTL0_LOCK_DIG BIT(30)
20 #define PLL_CTL0_RST BIT(29)
21 #define PLL_CTL0_EN BIT(28)
22 #define PLL_CTL0_SEL BIT(23)
23 #define PLL_CTL0_N GENMASK(14, 10)
24 #define PLL_CTL0_M GENMASK(8, 0)
25 #define PLL_LOCK_TIMEOUT 1000000
26 #define PLL_MUX_NUM_PARENT 2
27 #define ETH_PLL_CTL1 0x48
28 #define ETH_PLL_CTL2 0x4c
29 #define ETH_PLL_CTL3 0x50
30 #define ETH_PLL_CTL4 0x54
31 #define ETH_PLL_CTL5 0x58
32 #define ETH_PLL_CTL6 0x5c
33 #define ETH_PLL_CTL7 0x60
34
35 #define ETH_PHY_CNTL0 0x80
36 #define EPHY_G12A_ID 0x33010180
37 #define ETH_PHY_CNTL1 0x84
38 #define PHY_CNTL1_ST_MODE GENMASK(2, 0)
39 #define PHY_CNTL1_ST_PHYADD GENMASK(7, 3)
40 #define EPHY_DFLT_ADD 8
41 #define PHY_CNTL1_MII_MODE GENMASK(15, 14)
42 #define EPHY_MODE_RMII 0x1
43 #define PHY_CNTL1_CLK_EN BIT(16)
44 #define PHY_CNTL1_CLKFREQ BIT(17)
45 #define PHY_CNTL1_PHY_ENB BIT(18)
46 #define ETH_PHY_CNTL2 0x88
47 #define PHY_CNTL2_USE_INTERNAL BIT(5)
48 #define PHY_CNTL2_SMI_SRC_MAC BIT(6)
49 #define PHY_CNTL2_RX_CLK_EPHY BIT(9)
50
51 #define MESON_G12A_MDIO_EXTERNAL_ID 0
52 #define MESON_G12A_MDIO_INTERNAL_ID 1
53
54 struct g12a_mdio_mux {
55 bool pll_is_enabled;
56 void __iomem *regs;
57 void *mux_handle;
58 struct clk *pclk;
59 struct clk *pll;
60 };
61
62 struct g12a_ephy_pll {
63 void __iomem *base;
64 struct clk_hw hw;
65 };
66
67 #define g12a_ephy_pll_to_dev(_hw) \
68 container_of(_hw, struct g12a_ephy_pll, hw)
69
g12a_ephy_pll_recalc_rate(struct clk_hw * hw,unsigned long parent_rate)70 static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw,
71 unsigned long parent_rate)
72 {
73 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
74 u32 val, m, n;
75
76 val = readl(pll->base + ETH_PLL_CTL0);
77 m = FIELD_GET(PLL_CTL0_M, val);
78 n = FIELD_GET(PLL_CTL0_N, val);
79
80 return parent_rate * m / n;
81 }
82
g12a_ephy_pll_enable(struct clk_hw * hw)83 static int g12a_ephy_pll_enable(struct clk_hw *hw)
84 {
85 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
86 u32 val = readl(pll->base + ETH_PLL_CTL0);
87
88 /* Apply both enable an reset */
89 val |= PLL_CTL0_RST | PLL_CTL0_EN;
90 writel(val, pll->base + ETH_PLL_CTL0);
91
92 /* Clear the reset to let PLL lock */
93 val &= ~PLL_CTL0_RST;
94 writel(val, pll->base + ETH_PLL_CTL0);
95
96 /* Poll on the digital lock instead of the usual analog lock
97 * This is done because bit 31 is unreliable on some SoC. Bit
98 * 31 may indicate that the PLL is not lock eventhough the clock
99 * is actually running
100 */
101 return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val,
102 val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT);
103 }
104
g12a_ephy_pll_disable(struct clk_hw * hw)105 static void g12a_ephy_pll_disable(struct clk_hw *hw)
106 {
107 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
108 u32 val;
109
110 val = readl(pll->base + ETH_PLL_CTL0);
111 val &= ~PLL_CTL0_EN;
112 val |= PLL_CTL0_RST;
113 writel(val, pll->base + ETH_PLL_CTL0);
114 }
115
g12a_ephy_pll_is_enabled(struct clk_hw * hw)116 static int g12a_ephy_pll_is_enabled(struct clk_hw *hw)
117 {
118 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
119 unsigned int val;
120
121 val = readl(pll->base + ETH_PLL_CTL0);
122
123 return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0;
124 }
125
g12a_ephy_pll_init(struct clk_hw * hw)126 static int g12a_ephy_pll_init(struct clk_hw *hw)
127 {
128 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
129
130 /* Apply PLL HW settings */
131 writel(0x29c0040a, pll->base + ETH_PLL_CTL0);
132 writel(0x927e0000, pll->base + ETH_PLL_CTL1);
133 writel(0xac5f49e5, pll->base + ETH_PLL_CTL2);
134 writel(0x00000000, pll->base + ETH_PLL_CTL3);
135 writel(0x00000000, pll->base + ETH_PLL_CTL4);
136 writel(0x20200000, pll->base + ETH_PLL_CTL5);
137 writel(0x0000c002, pll->base + ETH_PLL_CTL6);
138 writel(0x00000023, pll->base + ETH_PLL_CTL7);
139
140 return 0;
141 }
142
143 static const struct clk_ops g12a_ephy_pll_ops = {
144 .recalc_rate = g12a_ephy_pll_recalc_rate,
145 .is_enabled = g12a_ephy_pll_is_enabled,
146 .enable = g12a_ephy_pll_enable,
147 .disable = g12a_ephy_pll_disable,
148 .init = g12a_ephy_pll_init,
149 };
150
g12a_enable_internal_mdio(struct g12a_mdio_mux * priv)151 static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
152 {
153 int ret;
154
155 /* Enable the phy clock */
156 if (!priv->pll_is_enabled) {
157 ret = clk_prepare_enable(priv->pll);
158 if (ret)
159 return ret;
160 }
161
162 priv->pll_is_enabled = true;
163
164 /* Initialize ephy control */
165 writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0);
166 writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
167 FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
168 FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
169 PHY_CNTL1_CLK_EN |
170 PHY_CNTL1_CLKFREQ |
171 PHY_CNTL1_PHY_ENB,
172 priv->regs + ETH_PHY_CNTL1);
173 writel(PHY_CNTL2_USE_INTERNAL |
174 PHY_CNTL2_SMI_SRC_MAC |
175 PHY_CNTL2_RX_CLK_EPHY,
176 priv->regs + ETH_PHY_CNTL2);
177
178 return 0;
179 }
180
g12a_enable_external_mdio(struct g12a_mdio_mux * priv)181 static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv)
182 {
183 /* Reset the mdio bus mux */
184 writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2);
185
186 /* Disable the phy clock if enabled */
187 if (priv->pll_is_enabled) {
188 clk_disable_unprepare(priv->pll);
189 priv->pll_is_enabled = false;
190 }
191
192 return 0;
193 }
194
g12a_mdio_switch_fn(int current_child,int desired_child,void * data)195 static int g12a_mdio_switch_fn(int current_child, int desired_child,
196 void *data)
197 {
198 struct g12a_mdio_mux *priv = dev_get_drvdata(data);
199
200 if (current_child == desired_child)
201 return 0;
202
203 switch (desired_child) {
204 case MESON_G12A_MDIO_EXTERNAL_ID:
205 return g12a_enable_external_mdio(priv);
206 case MESON_G12A_MDIO_INTERNAL_ID:
207 return g12a_enable_internal_mdio(priv);
208 default:
209 return -EINVAL;
210 }
211 }
212
213 static const struct of_device_id g12a_mdio_mux_match[] = {
214 { .compatible = "amlogic,g12a-mdio-mux", },
215 {},
216 };
217 MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match);
218
g12a_ephy_glue_clk_register(struct device * dev)219 static int g12a_ephy_glue_clk_register(struct device *dev)
220 {
221 struct g12a_mdio_mux *priv = dev_get_drvdata(dev);
222 const char *parent_names[PLL_MUX_NUM_PARENT];
223 struct clk_init_data init;
224 struct g12a_ephy_pll *pll;
225 struct clk_mux *mux;
226 struct clk *clk;
227 char *name;
228 int i;
229
230 /* get the mux parents */
231 for (i = 0; i < PLL_MUX_NUM_PARENT; i++) {
232 char in_name[8];
233
234 snprintf(in_name, sizeof(in_name), "clkin%d", i);
235 clk = devm_clk_get(dev, in_name);
236 if (IS_ERR(clk)) {
237 if (PTR_ERR(clk) != -EPROBE_DEFER)
238 dev_err(dev, "Missing clock %s\n", in_name);
239 return PTR_ERR(clk);
240 }
241
242 parent_names[i] = __clk_get_name(clk);
243 }
244
245 /* create the input mux */
246 mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
247 if (!mux)
248 return -ENOMEM;
249
250 name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev));
251 if (!name)
252 return -ENOMEM;
253
254 init.name = name;
255 init.ops = &clk_mux_ro_ops;
256 init.flags = 0;
257 init.parent_names = parent_names;
258 init.num_parents = PLL_MUX_NUM_PARENT;
259
260 mux->reg = priv->regs + ETH_PLL_CTL0;
261 mux->shift = __ffs(PLL_CTL0_SEL);
262 mux->mask = PLL_CTL0_SEL >> mux->shift;
263 mux->hw.init = &init;
264
265 clk = devm_clk_register(dev, &mux->hw);
266 kfree(name);
267 if (IS_ERR(clk)) {
268 dev_err(dev, "failed to register input mux\n");
269 return PTR_ERR(clk);
270 }
271
272 /* create the pll */
273 pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
274 if (!pll)
275 return -ENOMEM;
276
277 name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev));
278 if (!name)
279 return -ENOMEM;
280
281 init.name = name;
282 init.ops = &g12a_ephy_pll_ops;
283 init.flags = 0;
284 parent_names[0] = __clk_get_name(clk);
285 init.parent_names = parent_names;
286 init.num_parents = 1;
287
288 pll->base = priv->regs;
289 pll->hw.init = &init;
290
291 clk = devm_clk_register(dev, &pll->hw);
292 kfree(name);
293 if (IS_ERR(clk)) {
294 dev_err(dev, "failed to register input mux\n");
295 return PTR_ERR(clk);
296 }
297
298 priv->pll = clk;
299
300 return 0;
301 }
302
g12a_mdio_mux_probe(struct platform_device * pdev)303 static int g12a_mdio_mux_probe(struct platform_device *pdev)
304 {
305 struct device *dev = &pdev->dev;
306 struct g12a_mdio_mux *priv;
307 int ret;
308
309 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
310 if (!priv)
311 return -ENOMEM;
312
313 platform_set_drvdata(pdev, priv);
314
315 priv->regs = devm_platform_ioremap_resource(pdev, 0);
316 if (IS_ERR(priv->regs))
317 return PTR_ERR(priv->regs);
318
319 priv->pclk = devm_clk_get(dev, "pclk");
320 if (IS_ERR(priv->pclk)) {
321 ret = PTR_ERR(priv->pclk);
322 if (ret != -EPROBE_DEFER)
323 dev_err(dev, "failed to get peripheral clock\n");
324 return ret;
325 }
326
327 /* Make sure the device registers are clocked */
328 ret = clk_prepare_enable(priv->pclk);
329 if (ret) {
330 dev_err(dev, "failed to enable peripheral clock");
331 return ret;
332 }
333
334 /* Register PLL in CCF */
335 ret = g12a_ephy_glue_clk_register(dev);
336 if (ret)
337 goto err;
338
339 ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn,
340 &priv->mux_handle, dev, NULL);
341 if (ret) {
342 if (ret != -EPROBE_DEFER)
343 dev_err(dev, "mdio multiplexer init failed: %d", ret);
344 goto err;
345 }
346
347 return 0;
348
349 err:
350 clk_disable_unprepare(priv->pclk);
351 return ret;
352 }
353
g12a_mdio_mux_remove(struct platform_device * pdev)354 static int g12a_mdio_mux_remove(struct platform_device *pdev)
355 {
356 struct g12a_mdio_mux *priv = platform_get_drvdata(pdev);
357
358 mdio_mux_uninit(priv->mux_handle);
359
360 if (priv->pll_is_enabled)
361 clk_disable_unprepare(priv->pll);
362
363 clk_disable_unprepare(priv->pclk);
364
365 return 0;
366 }
367
368 static struct platform_driver g12a_mdio_mux_driver = {
369 .probe = g12a_mdio_mux_probe,
370 .remove = g12a_mdio_mux_remove,
371 .driver = {
372 .name = "g12a-mdio_mux",
373 .of_match_table = g12a_mdio_mux_match,
374 },
375 };
376 module_platform_driver(g12a_mdio_mux_driver);
377
378 MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver");
379 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
380 MODULE_LICENSE("GPL v2");
381