• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0
2 // TI LM3697 LED chip family driver
3 // Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
4 
5 #include <linux/gpio/consumer.h>
6 #include <linux/i2c.h>
7 #include <linux/of.h>
8 #include <linux/of_gpio.h>
9 #include <linux/regulator/consumer.h>
10 #include <linux/leds-ti-lmu-common.h>
11 
12 #define LM3697_REV			0x0
13 #define LM3697_RESET			0x1
14 #define LM3697_OUTPUT_CONFIG		0x10
15 #define LM3697_CTRL_A_RAMP		0x11
16 #define LM3697_CTRL_B_RAMP		0x12
17 #define LM3697_CTRL_A_B_RT_RAMP		0x13
18 #define LM3697_CTRL_A_B_RAMP_CFG	0x14
19 #define LM3697_CTRL_A_B_BRT_CFG		0x16
20 #define LM3697_CTRL_A_FS_CURR_CFG	0x17
21 #define LM3697_CTRL_B_FS_CURR_CFG	0x18
22 #define LM3697_PWM_CFG			0x1c
23 #define LM3697_CTRL_A_BRT_LSB		0x20
24 #define LM3697_CTRL_A_BRT_MSB		0x21
25 #define LM3697_CTRL_B_BRT_LSB		0x22
26 #define LM3697_CTRL_B_BRT_MSB		0x23
27 #define LM3697_CTRL_ENABLE		0x24
28 
29 #define LM3697_SW_RESET		BIT(0)
30 
31 #define LM3697_CTRL_A_EN	BIT(0)
32 #define LM3697_CTRL_B_EN	BIT(1)
33 #define LM3697_CTRL_A_B_EN	(LM3697_CTRL_A_EN | LM3697_CTRL_B_EN)
34 
35 #define LM3697_MAX_LED_STRINGS	3
36 
37 #define LM3697_CONTROL_A	0
38 #define LM3697_CONTROL_B	1
39 #define LM3697_MAX_CONTROL_BANKS 2
40 
41 /**
42  * struct lm3697_led -
43  * @hvled_strings: Array of LED strings associated with a control bank
44  * @label: LED label
45  * @led_dev: LED class device
46  * @priv: Pointer to the device struct
47  * @lmu_data: Register and setting values for common code
48  * @control_bank: Control bank the LED is associated to. 0 is control bank A
49  *		   1 is control bank B
50  */
51 struct lm3697_led {
52 	u32 hvled_strings[LM3697_MAX_LED_STRINGS];
53 	char label[LED_MAX_NAME_SIZE];
54 	struct led_classdev led_dev;
55 	struct lm3697 *priv;
56 	struct ti_lmu_bank lmu_data;
57 	int control_bank;
58 	int enabled;
59 	int num_leds;
60 };
61 
62 /**
63  * struct lm3697 -
64  * @enable_gpio: Hardware enable gpio
65  * @regulator: LED supply regulator pointer
66  * @client: Pointer to the I2C client
67  * @regmap: Devices register map
68  * @dev: Pointer to the devices device struct
69  * @lock: Lock for reading/writing the device
70  * @leds: Array of LED strings
71  */
72 struct lm3697 {
73 	struct gpio_desc *enable_gpio;
74 	struct regulator *regulator;
75 	struct i2c_client *client;
76 	struct regmap *regmap;
77 	struct device *dev;
78 	struct mutex lock;
79 
80 	int bank_cfg;
81 	int num_banks;
82 
83 	struct lm3697_led leds[];
84 };
85 
86 static const struct reg_default lm3697_reg_defs[] = {
87 	{LM3697_OUTPUT_CONFIG, 0x6},
88 	{LM3697_CTRL_A_RAMP, 0x0},
89 	{LM3697_CTRL_B_RAMP, 0x0},
90 	{LM3697_CTRL_A_B_RT_RAMP, 0x0},
91 	{LM3697_CTRL_A_B_RAMP_CFG, 0x0},
92 	{LM3697_CTRL_A_B_BRT_CFG, 0x0},
93 	{LM3697_CTRL_A_FS_CURR_CFG, 0x13},
94 	{LM3697_CTRL_B_FS_CURR_CFG, 0x13},
95 	{LM3697_PWM_CFG, 0xc},
96 	{LM3697_CTRL_A_BRT_LSB, 0x0},
97 	{LM3697_CTRL_A_BRT_MSB, 0x0},
98 	{LM3697_CTRL_B_BRT_LSB, 0x0},
99 	{LM3697_CTRL_B_BRT_MSB, 0x0},
100 	{LM3697_CTRL_ENABLE, 0x0},
101 };
102 
103 static const struct regmap_config lm3697_regmap_config = {
104 	.reg_bits = 8,
105 	.val_bits = 8,
106 
107 	.max_register = LM3697_CTRL_ENABLE,
108 	.reg_defaults = lm3697_reg_defs,
109 	.num_reg_defaults = ARRAY_SIZE(lm3697_reg_defs),
110 	.cache_type = REGCACHE_FLAT,
111 };
112 
lm3697_brightness_set(struct led_classdev * led_cdev,enum led_brightness brt_val)113 static int lm3697_brightness_set(struct led_classdev *led_cdev,
114 				enum led_brightness brt_val)
115 {
116 	struct lm3697_led *led = container_of(led_cdev, struct lm3697_led,
117 					      led_dev);
118 	int ctrl_en_val = (1 << led->control_bank);
119 	struct device *dev = led->priv->dev;
120 	int ret;
121 
122 	mutex_lock(&led->priv->lock);
123 
124 	if (brt_val == LED_OFF) {
125 		ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE,
126 					 ctrl_en_val, ~ctrl_en_val);
127 		if (ret) {
128 			dev_err(dev, "Cannot write ctrl register\n");
129 			goto brightness_out;
130 		}
131 
132 		led->enabled = LED_OFF;
133 	} else {
134 		ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val);
135 		if (ret) {
136 			dev_err(dev, "Cannot write brightness\n");
137 			goto brightness_out;
138 		}
139 
140 		if (!led->enabled) {
141 			ret = regmap_update_bits(led->priv->regmap,
142 						 LM3697_CTRL_ENABLE,
143 						 ctrl_en_val, ctrl_en_val);
144 			if (ret) {
145 				dev_err(dev, "Cannot enable the device\n");
146 				goto brightness_out;
147 			}
148 
149 			led->enabled = brt_val;
150 		}
151 	}
152 
153 brightness_out:
154 	mutex_unlock(&led->priv->lock);
155 	return ret;
156 }
157 
lm3697_init(struct lm3697 * priv)158 static int lm3697_init(struct lm3697 *priv)
159 {
160 	struct device *dev = priv->dev;
161 	struct lm3697_led *led;
162 	int i, ret;
163 
164 	if (priv->enable_gpio) {
165 		gpiod_direction_output(priv->enable_gpio, 1);
166 	} else {
167 		ret = regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET);
168 		if (ret) {
169 			dev_err(dev, "Cannot reset the device\n");
170 			goto out;
171 		}
172 	}
173 
174 	ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0);
175 	if (ret) {
176 		dev_err(dev, "Cannot write ctrl enable\n");
177 		goto out;
178 	}
179 
180 	ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, priv->bank_cfg);
181 	if (ret)
182 		dev_err(dev, "Cannot write OUTPUT config\n");
183 
184 	for (i = 0; i < priv->num_banks; i++) {
185 		led = &priv->leds[i];
186 		ret = ti_lmu_common_set_ramp(&led->lmu_data);
187 		if (ret)
188 			dev_err(dev, "Setting the ramp rate failed\n");
189 	}
190 out:
191 	return ret;
192 }
193 
lm3697_probe_dt(struct lm3697 * priv)194 static int lm3697_probe_dt(struct lm3697 *priv)
195 {
196 	struct fwnode_handle *child = NULL;
197 	struct device *dev = priv->dev;
198 	struct lm3697_led *led;
199 	int ret = -EINVAL;
200 	int control_bank;
201 	size_t i = 0;
202 	int j;
203 
204 	priv->enable_gpio = devm_gpiod_get_optional(dev, "enable",
205 						    GPIOD_OUT_LOW);
206 	if (IS_ERR(priv->enable_gpio))
207 		return dev_err_probe(dev, PTR_ERR(priv->enable_gpio),
208 					  "Failed to get enable GPIO\n");
209 
210 	priv->regulator = devm_regulator_get(dev, "vled");
211 	if (IS_ERR(priv->regulator))
212 		priv->regulator = NULL;
213 
214 	device_for_each_child_node(dev, child) {
215 		struct led_init_data init_data = {};
216 
217 		ret = fwnode_property_read_u32(child, "reg", &control_bank);
218 		if (ret) {
219 			dev_err(dev, "reg property missing\n");
220 			fwnode_handle_put(child);
221 			goto child_out;
222 		}
223 
224 		if (control_bank > LM3697_CONTROL_B) {
225 			dev_err(dev, "reg property is invalid\n");
226 			ret = -EINVAL;
227 			fwnode_handle_put(child);
228 			goto child_out;
229 		}
230 
231 		led = &priv->leds[i];
232 
233 		ret = ti_lmu_common_get_brt_res(dev, child, &led->lmu_data);
234 		if (ret)
235 			dev_warn(dev,
236 				 "brightness resolution property missing\n");
237 
238 		led->control_bank = control_bank;
239 		led->lmu_data.regmap = priv->regmap;
240 		led->lmu_data.runtime_ramp_reg = LM3697_CTRL_A_RAMP +
241 						 control_bank;
242 		led->lmu_data.msb_brightness_reg = LM3697_CTRL_A_BRT_MSB +
243 						   led->control_bank * 2;
244 		led->lmu_data.lsb_brightness_reg = LM3697_CTRL_A_BRT_LSB +
245 						   led->control_bank * 2;
246 
247 		led->num_leds = fwnode_property_count_u32(child, "led-sources");
248 		if (led->num_leds > LM3697_MAX_LED_STRINGS) {
249 			dev_err(dev, "Too many LED strings defined\n");
250 			continue;
251 		}
252 
253 		ret = fwnode_property_read_u32_array(child, "led-sources",
254 						    led->hvled_strings,
255 						    led->num_leds);
256 		if (ret) {
257 			dev_err(dev, "led-sources property missing\n");
258 			fwnode_handle_put(child);
259 			goto child_out;
260 		}
261 
262 		for (j = 0; j < led->num_leds; j++)
263 			priv->bank_cfg |=
264 				(led->control_bank << led->hvled_strings[j]);
265 
266 		ret = ti_lmu_common_get_ramp_params(dev, child, &led->lmu_data);
267 		if (ret)
268 			dev_warn(dev, "runtime-ramp properties missing\n");
269 
270 		init_data.fwnode = child;
271 		init_data.devicename = priv->client->name;
272 		/* for backwards compatibility if `label` is not present */
273 		init_data.default_label = ":";
274 
275 		led->priv = priv;
276 		led->led_dev.max_brightness = led->lmu_data.max_brightness;
277 		led->led_dev.brightness_set_blocking = lm3697_brightness_set;
278 
279 		ret = devm_led_classdev_register_ext(dev, &led->led_dev,
280 						     &init_data);
281 		if (ret) {
282 			dev_err(dev, "led register err: %d\n", ret);
283 			fwnode_handle_put(child);
284 			goto child_out;
285 		}
286 
287 		i++;
288 	}
289 
290 child_out:
291 	return ret;
292 }
293 
lm3697_probe(struct i2c_client * client,const struct i2c_device_id * id)294 static int lm3697_probe(struct i2c_client *client,
295 			const struct i2c_device_id *id)
296 {
297 	struct device *dev = &client->dev;
298 	struct lm3697 *led;
299 	int count;
300 	int ret;
301 
302 	count = device_get_child_node_count(dev);
303 	if (!count || count > LM3697_MAX_CONTROL_BANKS) {
304 		dev_err(dev, "Strange device tree!");
305 		return -ENODEV;
306 	}
307 
308 	led = devm_kzalloc(dev, struct_size(led, leds, count), GFP_KERNEL);
309 	if (!led)
310 		return -ENOMEM;
311 
312 	mutex_init(&led->lock);
313 	i2c_set_clientdata(client, led);
314 
315 	led->client = client;
316 	led->dev = dev;
317 	led->num_banks = count;
318 	led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config);
319 	if (IS_ERR(led->regmap)) {
320 		ret = PTR_ERR(led->regmap);
321 		dev_err(dev, "Failed to allocate register map: %d\n", ret);
322 		return ret;
323 	}
324 
325 	ret = lm3697_probe_dt(led);
326 	if (ret)
327 		return ret;
328 
329 	return lm3697_init(led);
330 }
331 
lm3697_remove(struct i2c_client * client)332 static int lm3697_remove(struct i2c_client *client)
333 {
334 	struct lm3697 *led = i2c_get_clientdata(client);
335 	struct device *dev = &led->client->dev;
336 	int ret;
337 
338 	ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE,
339 				 LM3697_CTRL_A_B_EN, 0);
340 	if (ret) {
341 		dev_err(dev, "Failed to disable the device\n");
342 		return ret;
343 	}
344 
345 	if (led->enable_gpio)
346 		gpiod_direction_output(led->enable_gpio, 0);
347 
348 	if (led->regulator) {
349 		ret = regulator_disable(led->regulator);
350 		if (ret)
351 			dev_err(dev, "Failed to disable regulator\n");
352 	}
353 
354 	mutex_destroy(&led->lock);
355 
356 	return 0;
357 }
358 
359 static const struct i2c_device_id lm3697_id[] = {
360 	{ "lm3697", 0 },
361 	{ }
362 };
363 MODULE_DEVICE_TABLE(i2c, lm3697_id);
364 
365 static const struct of_device_id of_lm3697_leds_match[] = {
366 	{ .compatible = "ti,lm3697", },
367 	{},
368 };
369 MODULE_DEVICE_TABLE(of, of_lm3697_leds_match);
370 
371 static struct i2c_driver lm3697_driver = {
372 	.driver = {
373 		.name	= "lm3697",
374 		.of_match_table = of_lm3697_leds_match,
375 	},
376 	.probe		= lm3697_probe,
377 	.remove		= lm3697_remove,
378 	.id_table	= lm3697_id,
379 };
380 module_i2c_driver(lm3697_driver);
381 
382 MODULE_DESCRIPTION("Texas Instruments LM3697 LED driver");
383 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
384 MODULE_LICENSE("GPL v2");
385