1:backend "gt68xx" 2:version "1.0-84 (unmaintained)" 3:manpage "sane-gt68xx" 4:url "http://www.meier-geinitz.de/sane/gt68xx-backend/" 5:comment "Only the USB scanners mentioned below are supported. For other Mustek BearPaws, look at the Plustek and the MA-1509 backend." 6:devicetype :scanner 7 8; ----------------------------------------------------------------------------- 9 10:mfg "Artec/Ultima" 11:url "http://www.artecusa.com/" 12 13:model "Ultima 2000" 14:interface "USB" 15:usbid "0x05d8" "0x4002" 16:status :good 17:comment "Works, only product id 0x4002 is supported" 18 19:model "Ultima 2000 e+" 20:interface "USB" 21:usbid "0x05d8" "0x4002" 22:status :good 23:comment "Works, however 12 bit mode doesn't seem to be supported" 24 25; ----------------------------------------------------------------------------- 26 27:mfg "Boeder" 28:model "Sm@rtScan Slim Edition" 29:interface "USB" 30:usbid "0x05d8" "0x4002" 31:status :good 32:comment "Similar to Artec Ultima 2000" 33 34; ----------------------------------------------------------------------------- 35 36:mfg "Fujitsu" 37:url "http://www.fujitsu.com/" 38 39:model "1200CUS" 40:interface "USB" 41:usbid "0x05d8" "0x4002" 42:status :basic 43:comment "Works, but is slow. Probably a Mustek BearPaw 2400 CU clone." 44 45; ----------------------------------------------------------------------------- 46 47:mfg "Genius" 48:url "http://www.genius-kye.com/" 49 50:model "ColorPage Slim 1200" 51;:url "unsupported/genius-colorpage-slim-1200.html" 52:interface "USB" 53:usbid "0x0458" "0x201e" 54:status :untested 55:comment "Untested but should work." 56 57:model "Colorpage SF600" 58:interface "USB" 59:usbid "0x0458" "0x2021" 60:status :basic 61 62:model "Colorpage Vivid3x" 63:interface "USB" 64:usbid "0x0458" "0x2011" 65:status :good 66 67:model "Colorpage Vivid3 V2" 68:interface "USB" 69:usbid "0x0458" "0x2011" 70:status :good 71:comment "Same as Colorpage Vivid3x" 72 73:model "Colorpage Vivid3xe" 74:interface "USB" 75:usbid "0x0458" "0x2017" 76:status :good 77 78:model "Colorpage Vivid4" 79:usbid "0x0458" "0x2014" 80:interface "USB" 81:status :good 82 83:model "Colorpage Vivid4x" 84:usbid "0x0458" "0x201b" 85:interface "USB" 86:status :good 87 88:model "Colorpage Vivid4xe" 89:usbid "0x0458" "0x201a" 90:interface "USB" 91:status :good 92 93:model "Colorpage Vivid 1200 X" 94:interface "USB" 95:usbid "0x0458" "0x201d" 96:status :good 97 98:model "Colorpage Vivid 1200 XE" 99:interface "USB" 100:usbid "0x0458" "0x201f" 101:status :good 102 103; ----------------------------------------------------------------------------- 104 105:mfg "Googlegear" 106:model "2000" 107:interface "USB" 108:usbid "0x05d8" "0x4002" 109:status :good 110:comment "Same as Artec Ultima 2000." 111 112; ----------------------------------------------------------------------------- 113 114:mfg "Lexmark" 115:url "http://www.lexmark.com/" 116:model "X70" 117:interface "USB" 118:usbid "0x043d" "0x002d" 119:status :good 120:comment "Works, some resolutions fail at 16 bit" 121 122:model "X73" 123:interface "USB" 124:usbid "0x043d" "0x002d" 125:status :good 126:comment "Works, some resolutions fail at 16 bit, same as X70" 127 128; ----------------------------------------------------------------------------- 129 130:mfg "Medion/Lifetec/Tevion/Cytron" 131:url "http://www.medion.com" 132:comment "Sold by Aldi and Tchibo." 133 134:model "MD 4394" 135:interface "USB" 136:usbid "0x05d8" "0x4002" 137:status :good 138:comment "Product id 0x4002. If you have 0x4003, use artec_eplus48u backend." 139 140:model "MD/LT 9375" 141:interface "USB" 142:usbid "0x05d8" "0x4002" 143:status :untested 144:comment "Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test." 145 146:model "MD/LT 9385" 147:interface "USB" 148:usbid "0x05d8" "0x4002" 149:status :good 150:comment "Similar to Artec Ultima 2000" 151 152:model "LT 9452" 153:interface "USB" 154:usbid "0x05d8" "0x4002" 155:status :good 156:comment "Similar to Mustek ScanExpress 1200 UB Plus" 157 158:model "MD 9458" 159:interface "USB" 160:usbid "0x05d8" "0x4002" 161:status :good 162:comment "Similar to Artec Ultima 2000 (e+?)" 163 164; ----------------------------------------------------------------------------- 165 166:mfg "Mustek" 167:url "http://www.mustek.com/" 168:url "http://www.mustek.com.tw/" 169:url "http://www.mustek.de/" 170 171:model "BearPaw 1200 CS" 172:interface "USB" 173:usbid "0x055f" "0x021e" 174:status :good 175 176:model "BearPaw 1200 CU" 177:interface "USB" 178:usbid "0x05d8" "0x4002" 179:status :good 180 181:model "BearPaw 1200 CU Plus" 182:interface "USB" 183:usbid "0x055f" "0x021b" 184:status :good 185 186:model "BearPaw 1200 CU Plus" 187:interface "USB" 188:usbid "0x055f" "0x021c" 189:status :good 190 191:model "BearPaw 1200 TA" 192:interface "USB" 193:usbid "0x055f" "0x021e" 194:status :good 195:comment "Transparency adapter supported" 196 197:model "BearPaw 1248 CU" 198:interface "USB" 199:usbid "0x055f" "0x021c" 200:status :good 201:comment "Seems to use the same ids as BearPaw 1200 CU Plus." 202 203:model "BearPaw 2400 CS" 204:interface "USB" 205:usbid "0x055f" "0x0218" 206:status :untested 207:comment "Probably works, reports are welcome" 208 209:model "BearPaw 2400 CS Plus" 210:interface "USB" 211:usbid "0x055f" "0x0219" 212:status :good 213:comment "Works, problems with 12/16 bit modes?" 214 215:model "BearPaw 2400 CU" 216:interface "USB" 217:usbid "0x05d8" "0x4002" 218:status :basic 219:comment "Works, but is slow" 220 221:model "BearPaw 2400 CU Plus" 222:interface "USB" 223:usbid "0x055f" "0x021d" 224:status :good 225 226:model "BearPaw 2400 TA" 227:interface "USB" 228:usbid "0x055f" "0x0218" 229:status :good 230:comment "Transparency adapter supported" 231 232:model "BearPaw 2400 TA Plus" 233:interface "USB" 234:usbid "0x055f" "0x0219" 235:status :good 236:comment "Transparency adapter supported" 237 238:model "BearPaw 2448 CS Plus" 239:interface "USB" 240:usbid "0x055f" "0x021a" 241:status :basic 242:comment "Slow. Same as 2448 TA Plus, but without TA." 243 244:model "BearPaw 2448 TA Plus" 245:interface "USB" 246:usbid "0x055f" "0x021a" 247:status :basic 248:comment "Slow. Transparency adapter supported. Slow. Brightness depends on resolution?" 249 250:model "Plug-n-Scan 2400 MT" 251:interface "USB" 252:usbid "0x055f" "0x0219" 253:status :good 254:comment "Works but is slow in high resolutions. Same as BearPaw 2400 TA Plus." 255 256:model "Plug-n-Scan 2400 M" 257:interface "USB" 258:usbid "0x055f" "0x0219" 259:status :good 260:comment "Works but is slow in high resolutions. Same as BearPaw 2400 CS Plus." 261 262:model "ScanExpress 1200 UB Plus" 263:interface "USB" 264:usbid "0x05d8" "0x4002" 265:status :good 266 267:model "ScanExpress 1248 UB" 268:interface "USB" 269:usbid "0x055f" "0x021f" 270:status :complete 271 272:model "ScanExpress 2400 USB" 273:interface "USB" 274:usbid "0x05d8" "0x4002" 275:status :minimal 276:comment "Should be detected but may need some more work in the code. Testers welcome. Please contact me if you own this scanner." 277 278:model "ScanExpress A3 USB" 279:interface "USB" 280:usbid "0x055f" "0x0210" 281:status :basic 282:comment "Still some vertical stripes." 283 284:model "ScanMagic 1200 UB Plus" 285:interface "USB" 286:usbid "0x05d8" "0x4002" 287:status :good 288:comment "Same as ScanExpress 1200 UB Plus" 289 290; ----------------------------------------------------------------------------- 291 292:mfg "NeatReceipts" 293 294:model "Scanalizer Professional 2.5" 295:interface "USB" 296:usbid "0x07b3" "0x0412" 297:status :untested 298:comment "Similar to Plustek OpticSlim M12. Please tell us if this scanner works." 299 300:model "Mobile Scanner" 301:interface "USB" 302:usbid "0x07b3" "0x0462" 303:status :basic 304:comment "Similar to Plustek OpticSlim M12." 305; ----------------------------------------------------------------------------- 306 307 308:mfg "Nortek" 309 310:model "MyScan 1200" 311:interface "USB" 312:usbid "0x07b3" "0x040b" 313:status :untested 314:comment "Untested. Please test. Similar to Plustek OpticPro S12?" 315; ----------------------------------------------------------------------------- 316 317:mfg "Packard Bell" 318 319:model "Diamond 1200" 320:interface "USB" 321:usbid "0x05d8" "0x4002" 322:status :good 323:comment "Similar to Mustek BearPaw 1200 (Plus)" 324 325:model "Diamond 1200 Plus" 326:interface "USB" 327:usbid "0x055f" "0x021c" 328:status :good 329:comment "Similar to Mustek BearPaw 1200 Plus" 330 331:model "Diamond 1200 Plus" 332:interface "USB" 333:usbid "0x055f" "0x021b" 334:status :good 335:comment "Similar to Mustek BearPaw 1200 Plus" 336 337:model "Diamond 2450" 338:interface "USB" 339:usbid "0x055f" "0x0219" 340:status :good 341 342; ----------------------------------------------------------------------------- 343 344:mfg "Plustek" 345:url "http://www.plustek.de/" 346:url "http://www.plustek.com/" 347 348:model "OpticPro 1248U" 349:interface "USB" 350:usbid "0x07b3" "0x0400" 351:status :good 352 353:model "OpticPro 1248U" 354:interface "USB" 355:usbid "0x07b3" "0x0401" 356:status :good 357 358:model "OpticPro U16B" 359:interface "USB" 360:usbid "0x07b3" "0x0402" 361:status :good 362 363:model "OpticPro U16B+" 364:interface "USB" 365:usbid "0x07b3" "0x0403" 366:status :good 367 368:model "OpticPro UT16B" 369:interface "USB" 370:usbid "0x07b3" "0x0403" 371:status :untested 372:comment "Probably works. Transparency adapter not supported yet. Please contact me if you own such a device. " 373 374:model "OpticPro S12" 375:interface "USB" 376:usbid "0x07b3" "0x040b" 377:status :good 378:comment "Product ID 0x040b only." 379 380:model "OpticPro S24" 381:interface "USB" 382:usbid "0x07b3" "0x040e" 383:status :good 384:comment "Product ID 0x040e only. Is reported to work." 385 386:model "OpticPro ST12" 387:interface "USB" 388:usbid "0x07b3" "0x040b" 389:status :untested 390:comment "Product ID 0x040b only. Needs testing. Transparency adapter completely untested. Please contact me if you own such a scanner." 391 392:model "OpticSlim 1200" 393:interface "USB" 394:usbid "0x07b3" "0x0413" 395:status :good 396 397:model "OpticSlim 2400" 398:interface "USB" 399:usbid "0x07b3" "0x0422" 400:status :good 401:comment "Works up to 1200 dpi." 402 403:model "OpticSlim 2400 plus" 404:interface "USB" 405:usbid "0x07b3" "0x0454" 406:status :good 407:comment "Same as OpticSlim 2400." 408 409:model "OpticSlim 500 plus" 410:interface "USB" 411:usbid "0x07b3" "0x046e" 412:status :good 413:comment "Need firmware from windows driver. Image is upside down because hardware in this model is upside down. Buttons not tested." 414 415:model "Iriscan Express 2" 416:interface "USB" 417:usbid "0x07b3" "0x045f" 418:status :complete 419:comment "Works up to 1200 dpi. Calibration with external calibration sheet supported" 420; ----------------------------------------------------------------------------- 421 422:model "OpticSlim M12" 423:interface "USB" 424:usbid "0x07b3" "0x0412" 425:status :complete 426:comment "Works up to 1200 dpi. Calibration with external calibration sheet supported" 427; ----------------------------------------------------------------------------- 428 429:mfg "RevScan" 430;:url "" 431 432:model "19200i" 433:interface "USB" 434:usbid "0x07b3" "0x0400" 435:status :good 436:comment "Similar to Plustek OpticPro 1248U" 437 438; ----------------------------------------------------------------------------- 439 440:mfg "Trust" 441:url "http://www.trust-site.com" 442 443:model "240TH Easy Webscan Gold" 444:interface "USB" 445:usbid "0x055f" "0x0218" 446:status :good 447:comment "Same as Mustek Bearpaw 2400 TA plus." 448 449:model "Compact Scan USB 19200" 450:interface "USB" 451:usbid "0x05d8" "0x4002" 452:status :good 453:comment "Works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus)" 454 455:model "Direct WebScan 19200" 456:interface "USB" 457:usbid "0x055f" "0x021c" 458:status :good 459:comment "Same as Mustek BearPaw 1200 CU Plus (0x021c)." 460 461:model "Flat Scan USB 19200" 462:interface "USB" 463:usbid "0x05d8" "0x4002" 464:status :good 465:comment "Similar to Artec Ultima 2000" 466 467; ----------------------------------------------------------------------------- 468 469:mfg "Visioneer" 470:url "http://www.visioneer.com/" 471 472:model "OneTouch 7300" 473:interface "USB" 474:usbid "0x04a7" "0x0444" 475:status :good 476:comment "Works up to 1200 dpi and 12 bits/color." 477 478; ----------------------------------------------------------------------------- 479