sane-niash sane-niash - SANE backend for scanners based on the NIASH chipset The sane-niash implements a SANE (Scanner Access Now Easy) backend that provides access to NIASH chipset based scanners. This backend will try to support the following models:

MANUFACTURER: MODEL: USB ID:
--------------- ---------------- ---------
Agfa Snapscan Touch 06BD-0100 (1)(a)
Trust Office Scan 19200 047B-1000 (1)(a)
Hewlett-Packard Scanjet 3300c 03F0-0205 (1)(a)(b)
Hewlett-Packard Scanjet 3400c 03F0-0405 (2)(b)
Hewlett-Packard Scanjet 4300c 03F0-0305 (2)(a)
Silitek ScanJet 4300c 047B-1002 (2)(b)

ASIC: (1) - NIASH00012/00013/00014 / (2) - NIASH00019

ANALOG FRONT-END: (a) - ESIC ES8100QA / (b) - WM8143-12

The niash.conf file is meant for future configuration options. Empty lines and lines starting with a hash mark (#) are ignored. Currently no configuration options exist.

@LIBDIR@/libsane-niash.a The static library implementing this backend.

@LIBDIR@/libsane-niash.so The shared library implementing this backend (present on systems that support dynamic loading).

If you use a

Hewlett-Packard Scanjet 3400c or

Hewlett-Packard Scanjet 4300c

together with Linux kernel 2.6 , kernel version 2.6.8 or newer is necessary.

SANE_DEBUG_NIASH If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output. Example: export SANE_DEBUG_NIASH=255

sane (7), sane-usb (5)

http://www.sourceforge.net/projects/hp3300backend

Bertrik Sikken < bertrik@zonnet.nl >