1### magicolor.conf 2### 3### here are some examples for how to configure the Magicolor backend 4 5### Timeout settings: SNMP autodetection, Scan data read requests and other 6### read requests. All values are given in milliseconds, 7### i.e. 1000 is 1 second. 8 9# SNMP auto-detection waits 1.5 seconds 10snmp-timeout 1500 11 12# wait 15 seconds for scan data (color scans take ~6 seconds to initialize, 13# so we need to wait longer than that) 14scan-data-timeout 15000 15 16# Wait 5 seconds for all other data requests 17request-timeout 5000 18 19 20### Network: Format is "net IP_ADDRESS [USB_ID]" or "net autodiscovery" 21### if USB_ID is left out, SNMP is used to detect the device type 22 23net autodiscovery 24#net 10.0.0.5 25 26### The following is a magicolor 1690mf with explicit IP-Address 27#net 10.0.0.5 0x2098 28# net 192.168.0.1 29 30### USB: format is "usb" for automatic (libusb) discovery, based on USB IDs, 31### or "usb <vendor ID> <device ID> to force the use of a particular 32### device (the backend has some additional checks and will not use 33### non-KONICA MINOLTA devices, though) 34 35usb 36 37### For libusb support for unknown scanners use the following command 38### usb <product ID> <device ID> 39### e.g.: 40 41# usb 0x132b 0x2098 42