sane-nec 5 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
sane-nec NAME
sane-nec - SANE backend for NEC scanners
DESCRIPTION
The
sane-nec library implements a SANE (Scanner Access Now Easy) backend that
provides access to NEC SCSI scanners. This backend should be
considered
alpha-quality software! In the current state it is known to work with PC-IN500/4C
scanners. Other MultiReader scanner series are not supported. PC-IN
500/4C and MultiReader scanner are only sold in Japan (except Multi
Reader PetiScan).
For other scanners, it may or may not work.
The backend has the following known problems:
At present, the following scanners are known to work with this backend.
Vendor Product id ------ ----------- NEC PC-IN500/4C
FILES
@CONFIGDIR@/nec.conf The backend configuration file.
@LIBDIR@/libsane-nec.a The static library implementing this backend.
@LIBDIR@/libsane-nec.so The shared library implementing this backend (present on systems that support dynamic loading).
ENVIRONMENT
SANE_DEBUG_NEC If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity.
"SEE ALSO"
sane (7), sane-scsi (5)
AUTHORS
Kazuya Fukuda