aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves an aggregated list of interconnect attachments.
aggregatedList_next(previous_request, previous_response)
Retrieves the next page of results.
delete(project, region, interconnectAttachment, requestId=None)
Deletes the specified interconnect attachment.
get(project, region, interconnectAttachment)
Returns the specified interconnect attachment.
getIamPolicy(project, region, resource)
Gets the access control policy for a resource. May be empty if no such policy or resource exists.
insert(project, region, body, requestId=None)
Creates an InterconnectAttachment in the specified project using the data included in the request.
list(project, region, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves the list of interconnect attachments contained within the specified region.
list_next(previous_request, previous_response)
Retrieves the next page of results.
testIamPermissions(project, region, resource, body)
Returns permissions that a caller has on the specified resource.
aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves an aggregated list of interconnect attachments.
Args:
project: string, Project ID for this request. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
Currently, only sorting by name or creationTimestamp desc is supported.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
filter: string, Sets a filter expression for filtering listed resources, in the form filter={expression}. Your {expression} must be in the format: field_name comparison_string literal_string.
The field_name is the name of the field you want to compare. Only atomic field types are supported (string, number, boolean). The comparison_string must be either eq (equals) or ne (not equals). The literal_string is the string value to filter to. The literal value must be valid for the type of field you are filtering by (string, number, boolean). For string fields, the literal value is interpreted as a regular expression using RE2 syntax. The literal value must match the entire field.
For example, to filter for instances that do not have a name of example-instance, you would use filter=name ne example-instance.
You can filter on nested fields. For example, you could filter on instances that have set the scheduling.automaticRestart field to true. Use filtering on nested fields to take advantage of labels to organize and search for results based on label values.
To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart eq true) (zone eq us-central1-f). Multiple expressions are treated as AND expressions, meaning that resources must match all expressions to pass the filters.
Returns:
An object of the form:
{
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"items": { # [Output Only] A map of scoped InterconnectAttachment lists.
"a_key": { # Name of the scope containing this set of interconnect attachments.
"interconnectAttachments": [ # List of interconnect attachments contained in this scope.
{ # Protocol definitions for Mixer API to support InterconnectAttachment. Next available tag: 14
"cloudRouterIpAddress": "A String", # [Output Only] IPv4 address + prefix length to be configured on Cloud Router Interface for this interconnect attachment.
"kind": "compute#interconnectAttachment", # [Output Only] Type of the resource. Always compute#interconnectAttachment for interconnect attachments.
"customerRouterIpAddress": "A String", # [Output Only] IPv4 address + prefix length to be configured on the customer router subinterface for this interconnect attachment.
"interconnect": "A String", # URL of the underlying Interconnect object that this attachment's traffic will traverse through.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"privateInterconnectInfo": { # Private information for an interconnect attachment when this belongs to an interconnect of type IT_PRIVATE. # [Output Only] Information specific to a Private InterconnectAttachment. Only populated if the interconnect that this is attached is of type IT_PRIVATE.
"tag8021q": 42, # [Output Only] 802.1q encapsulation tag to be used for traffic between Google and the customer, going to and from this network and region.
},
"googleReferenceId": "A String", # [Output Only] Google reference ID, to be used when raising support tickets with Google or otherwise to debug backend connectivity issues.
"operationalStatus": "A String", # [Output Only] The current status of whether or not this interconnect attachment is functional.
"router": "A String", # URL of the cloud router to be used for dynamic routing. This router must be in the same region as this InterconnectAttachment. The InterconnectAttachment will automatically connect the Interconnect to the network & region within which the Cloud Router is configured.
"region": "A String", # [Output Only] URL of the region where the regional interconnect attachment resides.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
},
],
"warning": { # Informational warning which replaces the list of addresses when the list is empty.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
},
},
"kind": "compute#interconnectAttachmentAggregatedList", # [Output Only] Type of resource. Always compute#interconnectAttachmentAggregatedList for aggregated lists of interconnect attachments.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}
aggregatedList_next(previous_request, previous_response)
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
delete(project, region, interconnectAttachment, requestId=None)
Deletes the specified interconnect attachment.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
interconnectAttachment: string, Name of the interconnect attachment to delete. (required)
requestId: string, begin_interface: MixerMutationRequestBuilder Request ID to support idempotency.
Returns:
An object of the form:
{ # An Operation resource, used to manage asynchronous API requests.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] Reserved for future use.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the resource.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
get(project, region, interconnectAttachment)
Returns the specified interconnect attachment.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
interconnectAttachment: string, Name of the interconnect attachment to return. (required)
Returns:
An object of the form:
{ # Protocol definitions for Mixer API to support InterconnectAttachment. Next available tag: 14
"cloudRouterIpAddress": "A String", # [Output Only] IPv4 address + prefix length to be configured on Cloud Router Interface for this interconnect attachment.
"kind": "compute#interconnectAttachment", # [Output Only] Type of the resource. Always compute#interconnectAttachment for interconnect attachments.
"customerRouterIpAddress": "A String", # [Output Only] IPv4 address + prefix length to be configured on the customer router subinterface for this interconnect attachment.
"interconnect": "A String", # URL of the underlying Interconnect object that this attachment's traffic will traverse through.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"privateInterconnectInfo": { # Private information for an interconnect attachment when this belongs to an interconnect of type IT_PRIVATE. # [Output Only] Information specific to a Private InterconnectAttachment. Only populated if the interconnect that this is attached is of type IT_PRIVATE.
"tag8021q": 42, # [Output Only] 802.1q encapsulation tag to be used for traffic between Google and the customer, going to and from this network and region.
},
"googleReferenceId": "A String", # [Output Only] Google reference ID, to be used when raising support tickets with Google or otherwise to debug backend connectivity issues.
"operationalStatus": "A String", # [Output Only] The current status of whether or not this interconnect attachment is functional.
"router": "A String", # URL of the cloud router to be used for dynamic routing. This router must be in the same region as this InterconnectAttachment. The InterconnectAttachment will automatically connect the Interconnect to the network & region within which the Cloud Router is configured.
"region": "A String", # [Output Only] URL of the region where the regional interconnect attachment resides.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
}
getIamPolicy(project, region, resource)
Gets the access control policy for a resource. May be empty if no such policy or resource exists.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
resource: string, Name of the resource for this request. (required)
Returns:
An object of the form:
{ # Defines an Identity and Access Management (IAM) policy. It is used to specify access control policies for Cloud Platform resources.
#
#
#
# A `Policy` consists of a list of `bindings`. A `Binding` binds a list of `members` to a `role`, where the members can be user accounts, Google groups, Google domains, and service accounts. A `role` is a named list of permissions defined by IAM.
#
# **Example**
#
# { "bindings": [ { "role": "roles/owner", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-other-app@appspot.gserviceaccount.com", ] }, { "role": "roles/viewer", "members": ["user:sean@example.com"] } ] }
#
# For a description of IAM and its features, see the [IAM developer's guide](https://cloud.google.com/iam).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
#
# If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditConfig are exempted.
#
# Example Policy with multiple AuditConfigs:
#
# { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:foo@gmail.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "fooservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:bar@gmail.com" ] } ] } ] }
#
# For fooservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts foo@gmail.com from DATA_READ logging, and bar@gmail.com from DATA_WRITE logging.
"exemptedMembers": [
"A String",
],
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example:
#
# { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:foo@gmail.com" ] }, { "log_type": "DATA_WRITE", } ] }
#
# This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting foo@gmail.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
"A String",
],
"logType": "A String", # The log type that this config enables.
},
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
{ # A rule to be applied in a Policy.
"logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
{ # Specifies what kind of log the caller must write
"counter": { # Options for counters # Counter options.
"field": "A String", # The field value to attribute.
"metric": "A String", # The metric to update.
},
"cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
"logName": "A String", # The log_name to populate in the Cloud Audit Record.
},
},
],
"notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
"A String",
],
"ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
"A String",
],
"action": "A String", # Required
"permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
"A String",
],
"conditions": [ # Additional restrictions that must be met
{ # A condition to be met.
"iam": "A String", # Trusted attributes supplied by the IAM system.
"svc": "A String", # Trusted attributes discharged by the service.
"value": "A String", # DEPRECATED. Use 'values' instead.
"sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
"values": [ # The objects of the condition. This is mutually exclusive with 'value'.
"A String",
],
"op": "A String", # An operator to apply the subject with.
},
],
"description": "A String", # Human-readable description of the rule.
},
],
"version": 42, # Version of the `Policy`. The default version is 0.
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
#
# If no `etag` is provided in the call to `setIamPolicy`, then the existing policy is overwritten blindly.
"bindings": [ # Associates a list of `members` to a `role`. Multiple `bindings` must not be specified for the same `role`. `bindings` with no members will result in an error.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@gmail.com` or `joe@example.com`.
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
#
#
# * `domain:{domain}`: A Google Apps domain name that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
},
],
"iamOwned": True or False,
}
insert(project, region, body, requestId=None)
Creates an InterconnectAttachment in the specified project using the data included in the request.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
body: object, The request body. (required)
The object takes the form of:
{ # Protocol definitions for Mixer API to support InterconnectAttachment. Next available tag: 14
"cloudRouterIpAddress": "A String", # [Output Only] IPv4 address + prefix length to be configured on Cloud Router Interface for this interconnect attachment.
"kind": "compute#interconnectAttachment", # [Output Only] Type of the resource. Always compute#interconnectAttachment for interconnect attachments.
"customerRouterIpAddress": "A String", # [Output Only] IPv4 address + prefix length to be configured on the customer router subinterface for this interconnect attachment.
"interconnect": "A String", # URL of the underlying Interconnect object that this attachment's traffic will traverse through.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"privateInterconnectInfo": { # Private information for an interconnect attachment when this belongs to an interconnect of type IT_PRIVATE. # [Output Only] Information specific to a Private InterconnectAttachment. Only populated if the interconnect that this is attached is of type IT_PRIVATE.
"tag8021q": 42, # [Output Only] 802.1q encapsulation tag to be used for traffic between Google and the customer, going to and from this network and region.
},
"googleReferenceId": "A String", # [Output Only] Google reference ID, to be used when raising support tickets with Google or otherwise to debug backend connectivity issues.
"operationalStatus": "A String", # [Output Only] The current status of whether or not this interconnect attachment is functional.
"router": "A String", # URL of the cloud router to be used for dynamic routing. This router must be in the same region as this InterconnectAttachment. The InterconnectAttachment will automatically connect the Interconnect to the network & region within which the Cloud Router is configured.
"region": "A String", # [Output Only] URL of the region where the regional interconnect attachment resides.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
}
requestId: string, begin_interface: MixerMutationRequestBuilder Request ID to support idempotency.
Returns:
An object of the form:
{ # An Operation resource, used to manage asynchronous API requests.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] Reserved for future use.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the resource.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
list(project, region, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves the list of interconnect attachments contained within the specified region.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
Currently, only sorting by name or creationTimestamp desc is supported.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
filter: string, Sets a filter expression for filtering listed resources, in the form filter={expression}. Your {expression} must be in the format: field_name comparison_string literal_string.
The field_name is the name of the field you want to compare. Only atomic field types are supported (string, number, boolean). The comparison_string must be either eq (equals) or ne (not equals). The literal_string is the string value to filter to. The literal value must be valid for the type of field you are filtering by (string, number, boolean). For string fields, the literal value is interpreted as a regular expression using RE2 syntax. The literal value must match the entire field.
For example, to filter for instances that do not have a name of example-instance, you would use filter=name ne example-instance.
You can filter on nested fields. For example, you could filter on instances that have set the scheduling.automaticRestart field to true. Use filtering on nested fields to take advantage of labels to organize and search for results based on label values.
To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart eq true) (zone eq us-central1-f). Multiple expressions are treated as AND expressions, meaning that resources must match all expressions to pass the filters.
Returns:
An object of the form:
{ # Response to the list request, and contains a list of interconnect attachments.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"items": [ # [Output Only] A list of InterconnectAttachment resources.
{ # Protocol definitions for Mixer API to support InterconnectAttachment. Next available tag: 14
"cloudRouterIpAddress": "A String", # [Output Only] IPv4 address + prefix length to be configured on Cloud Router Interface for this interconnect attachment.
"kind": "compute#interconnectAttachment", # [Output Only] Type of the resource. Always compute#interconnectAttachment for interconnect attachments.
"customerRouterIpAddress": "A String", # [Output Only] IPv4 address + prefix length to be configured on the customer router subinterface for this interconnect attachment.
"interconnect": "A String", # URL of the underlying Interconnect object that this attachment's traffic will traverse through.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"privateInterconnectInfo": { # Private information for an interconnect attachment when this belongs to an interconnect of type IT_PRIVATE. # [Output Only] Information specific to a Private InterconnectAttachment. Only populated if the interconnect that this is attached is of type IT_PRIVATE.
"tag8021q": 42, # [Output Only] 802.1q encapsulation tag to be used for traffic between Google and the customer, going to and from this network and region.
},
"googleReferenceId": "A String", # [Output Only] Google reference ID, to be used when raising support tickets with Google or otherwise to debug backend connectivity issues.
"operationalStatus": "A String", # [Output Only] The current status of whether or not this interconnect attachment is functional.
"router": "A String", # URL of the cloud router to be used for dynamic routing. This router must be in the same region as this InterconnectAttachment. The InterconnectAttachment will automatically connect the Interconnect to the network & region within which the Cloud Router is configured.
"region": "A String", # [Output Only] URL of the region where the regional interconnect attachment resides.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
},
],
"kind": "compute#interconnectAttachmentList", # [Output Only] Type of resource. Always compute#interconnectAttachmentList for lists of interconnect attachments.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}
list_next(previous_request, previous_response)
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
testIamPermissions(project, region, resource, body)
Returns permissions that a caller has on the specified resource.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
resource: string, Name of the resource for this request. (required)
body: object, The request body. (required)
The object takes the form of:
{
"permissions": [ # The set of permissions to check for the 'resource'. Permissions with wildcards (such as '*' or 'storage.*') are not allowed.
"A String",
],
}
Returns:
An object of the form:
{
"permissions": [ # A subset of `TestPermissionsRequest.permissions` that the caller is allowed.
"A String",
],
}