Compute Engine API . instances

Instance Methods

addAccessConfig(project, zone, instance, networkInterface, body)

Adds an access config to an instance's network interface.

aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None)

Retrieves aggregated list of instances.

aggregatedList_next(previous_request, previous_response)

Retrieves the next page of results.

attachDisk(project, zone, instance, body)

Attaches an existing Disk resource to an instance. You must first create the disk before you can attach it. It is not possible to create and attach a disk at the same time. For more information, read Adding a persistent disk to your instance.

delete(project, zone, instance)

Deletes the specified Instance resource. For more information, see Stopping or Deleting an Instance.

deleteAccessConfig(project, zone, instance, accessConfig, networkInterface)

Deletes an access config from an instance's network interface.

detachDisk(project, zone, instance, deviceName)

Detaches a disk from an instance.

get(project, zone, instance)

Returns the specified Instance resource. Get a list of available instances by making a list() request.

getSerialPortOutput(project, zone, instance, start=None, port=None)

Returns the specified instance's serial port output.

insert(project, zone, body)

Creates an instance resource in the specified project using the data included in the request.

list(project, zone, orderBy=None, maxResults=None, pageToken=None, filter=None)

Retrieves the list of instances contained within the specified zone.

listReferrers(project, zone, instance, orderBy=None, filter=None, maxResults=None, pageToken=None)

Retrieves the list of referrers to instances contained within the specified zone.

listReferrers_next(previous_request, previous_response)

Retrieves the next page of results.

list_next(previous_request, previous_response)

Retrieves the next page of results.

reset(project, zone, instance)

Performs a reset on the instance. For more information, see Resetting an instance.

setDiskAutoDelete(project, zone, instance, autoDelete, deviceName)

Sets the auto-delete flag for a disk attached to an instance.

setLabels(project, zone, instance, body)

Sets labels on an instance. To learn more about labels, read the Labeling or Tagging Resources documentation.

setMachineResources(project, zone, instance, body)

Changes the number and/or type of accelerator for a stopped instance to the values specified in the request.

setMachineType(project, zone, instance, body)

Changes the machine type for a stopped instance to the machine type specified in the request.

setMetadata(project, zone, instance, body)

Sets metadata for the specified instance to the data included in the request.

setMinCpuPlatform(project, zone, instance, body, requestId=None)

Changes the minimum cpu/platform that this instance should be started as. This is called on a stopped instance.

setScheduling(project, zone, instance, body)

Sets an instance's scheduling options.

setServiceAccount(project, zone, instance, body)

Sets the service account on the instance. For more information, read Changing the service account and access scopes for an instance.

setTags(project, zone, instance, body)

Sets tags for the specified instance to the data included in the request.

start(project, zone, instance)

Starts an instance that was stopped using the using the instances().stop method. For more information, see Restart an instance.

startWithEncryptionKey(project, zone, instance, body)

Starts an instance that was stopped using the using the instances().stop method. For more information, see Restart an instance.

stop(project, zone, instance)

Stops a running instance, shutting it down cleanly, and allows you to restart the instance at a later time. Stopped instances do not incur per-minute, virtual machine usage charges while they are stopped, but any resources that the virtual machine is using, such as persistent disks and static IP addresses, will continue to be charged until they are deleted. For more information, see Stopping an instance.

testIamPermissions(project, zone, resource, body)

Returns permissions that a caller has on the specified resource.

Method Details

addAccessConfig(project, zone, instance, networkInterface, body)
Adds an access config to an instance's network interface.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, The instance name for this request. (required)
  networkInterface: string, The name of the network interface to add to this instance. (required)
  body: object, The request body. (required)
    The object takes the form of:

{ # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
  "kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
  "type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
  "name": "A String", # The name of this access configuration. The default and recommended name is External NAT but you can use any arbitrary string you would like. For example, My external IP or Network Access.
  "natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
}


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves aggregated list of instances.

Args:
  project: string, Project ID for this request. (required)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.

You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.

Currently, only sorting by name or creationTimestamp desc is supported.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
  pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
  filter: string, Sets a filter expression for filtering listed resources, in the form filter={expression}. Your {expression} must be in the format: field_name comparison_string literal_string.

The field_name is the name of the field you want to compare. Only atomic field types are supported (string, number, boolean). The comparison_string must be either eq (equals) or ne (not equals). The literal_string is the string value to filter to. The literal value must be valid for the type of field you are filtering by (string, number, boolean). For string fields, the literal value is interpreted as a regular expression using RE2 syntax. The literal value must match the entire field.

For example, to filter for instances that do not have a name of example-instance, you would use filter=name ne example-instance.

You can filter on nested fields. For example, you could filter on instances that have set the scheduling.automaticRestart field to true. Use filtering on nested fields to take advantage of labels to organize and search for results based on label values.

To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart eq true) (zone eq us-central1-f). Multiple expressions are treated as AND expressions, meaning that resources must match all expressions to pass the filters.

Returns:
  An object of the form:

    {
    "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
    "items": { # [Output Only] A map of scoped instance lists.
      "a_key": { # [Output Only] Name of the scope containing this set of instances.
        "instances": [ # [Output Only] List of instances contained in this scope.
          { # An Instance resource.
            "status": "A String", # [Output Only] The status of the instance. One of the following values: PROVISIONING, STAGING, RUNNING, STOPPING, SUSPENDING, SUSPENDED, and TERMINATED.
            "guestAccelerators": [ # List of the type and count of accelerator cards attached to the instance.
              { # A specification of the type and number of accelerator cards attached to the instance.
                "acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
                "acceleratorType": "A String", # Full or partial URL of the accelerator type resource to expose to this instance.
              },
            ],
            "labels": { # Labels to apply to this instance. These can be later modified by the setLabels method.
              "a_key": "A String",
            },
            "scheduling": { # Sets the scheduling options for an Instance. # Sets the scheduling options for this instance.
              "automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
                  #
                  # By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
              "preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
              "onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
            },
            "minCpuPlatform": "A String", # Minimum cpu/platform to be used by this instance. We may schedule on the specified or later cpu/platform.
            "serviceAccounts": [ # A list of service accounts, with their specified scopes, authorized for this instance. Only one service account per VM instance is supported.
                #
                # Service accounts generate access tokens that can be accessed through the metadata server and used to authenticate applications on the instance. See Service Accounts for more information.
              { # A service account.
                "scopes": [ # The list of scopes to be made available for this service account.
                  "A String",
                ],
                "email": "A String", # Email address of the service account.
              },
            ],
            "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
            "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
            "networkInterfaces": [ # An array of configurations for this interface. This specifies how this interface is configured to interact with other network services, such as connecting to the internet. Only one interface is supported per instance.
              { # A network interface resource attached to an instance.
                "kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
                "aliasIpRanges": [ # An array of alias IP ranges for this network interface. Can only be specified for network interfaces on subnet-mode networks.
                  { # An alias IP range attached to an instance's network interface.
                    "subnetworkRangeName": "A String", # Optional subnetwork secondary range name specifying the secondary range from which to allocate the IP CIDR range for this alias IP range. If left unspecified, the primary range of the subnetwork will be used.
                    "ipCidrRange": "A String", # The IP CIDR range represented by this alias IP range. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (e.g. 10.2.3.4), a netmask (e.g. /24) or a CIDR format string (e.g. 10.1.2.0/24).
                  },
                ],
                "network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
                    #
                    # This field is optional when creating a firewall rule. If not specified when creating a firewall rule, the default network global/networks/default is used.
                    #
                    # If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
                    # - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
                    # - projects/project/global/networks/network
                    # - global/networks/default
                "accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
                  { # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
                    "kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
                    "type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
                    "name": "A String", # The name of this access configuration. The default and recommended name is External NAT but you can use any arbitrary string you would like. For example, My external IP or Network Access.
                    "natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
                  },
                ],
                "networkIP": "A String", # An IPv4 internal network address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
                "subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not provide this property. If the network is in auto subnet mode, providing the subnetwork is optional. If the network is in custom subnet mode, then this field should be specified. If you specify this property, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
                    # - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
                    # - regions/region/subnetworks/subnetwork
                "name": "A String", # [Output Only] The name of the network interface, generated by the server. For network devices, these are eth0, eth1, etc.
              },
            ],
            "startRestricted": True or False, # [Output Only] Whether a VM has been restricted for start because Compute Engine has detected suspicious activity.
            "zone": "A String", # [Output Only] URL of the zone where the instance resides.
            "statusMessage": "A String", # [Output Only] An optional, human-readable explanation of the status.
            "metadata": { # A metadata key/value entry. # The metadata key/value pairs assigned to this instance. This includes custom metadata and predefined keys.
              "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
                {
                  "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 32768 bytes.
                  "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
                },
              ],
              "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
              "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
            },
            "cpuPlatform": "A String", # [Output Only] The CPU platform used by this instance.
            "canIpForward": True or False, # Allows this instance to send and receive packets with non-matching destination or source IPs. This is required if you plan to use this instance to forward routes. For more information, see Enabling IP Forwarding.
            "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
            "tags": { # A set of instance tags. # A list of tags to apply to this instance. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during instance creation. The tags can be later modified by the setTags method. Each tag within the list must comply with RFC1035.
              "items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
                "A String",
              ],
              "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
                  #
                  # To see the latest fingerprint, make get() request to the instance.
            },
            "labelFingerprint": "A String", # A fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
                #
                # To see the latest fingerprint, make get() request to the instance.
            "machineType": "A String", # Full or partial URL of the machine type resource to use for this instance, in the format: zones/zone/machineTypes/machine-type. This is provided by the client when the instance is created. For example, the following is a valid partial url to a predefined machine type:
                #
                # zones/us-central1-f/machineTypes/n1-standard-1
                #
                # To create a custom machine type, provide a URL to a machine type in the following format, where CPUS is 1 or an even number up to 32 (2, 4, 6, ... 24, etc), and MEMORY is the total memory for this instance. Memory must be a multiple of 256 MB and must be supplied in MB (e.g. 5 GB of memory is 5120 MB):
                #
                # zones/zone/machineTypes/custom-CPUS-MEMORY
                #
                # For example: zones/us-central1-f/machineTypes/custom-4-5120
                #
                # For a full list of restrictions, read the Specifications for custom machine types.
            "kind": "compute#instance", # [Output Only] Type of the resource. Always compute#instance for instances.
            "name": "A String", # The name of the resource, provided by the client when initially creating the resource. The resource name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
            "disks": [ # Array of disks associated with this instance. Persistent disks must be created before you can assign them.
              { # An instance-attached disk resource.
                "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
                    #
                    # If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
                    #
                    # If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
                    #
                    # If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
                    #
                    # Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
                  "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
                  "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
                  "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
                      #
                      # The key must meet the following requirements before you can provide it to Compute Engine:
                      # - The key is wrapped using a RSA public key certificate provided by Google.
                      # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
                      # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
                },
                "deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
                    #
                    # If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disks-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
                "kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
                "initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
                    #
                    # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
                    #
                    # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
                  "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
                      #
                      # Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
                    "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
                    "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
                    "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
                        #
                        # The key must meet the following requirements before you can provide it to Compute Engine:
                        # - The key is wrapped using a RSA public key certificate provided by Google.
                        # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
                        # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
                  },
                  "diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance.
                  "diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
                      #
                      # https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
                      #
                      # Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
                      # - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
                      # - projects/project/zones/zone/diskTypes/diskType
                      # - zones/zone/diskTypes/diskType  Note that for InstanceTemplate, this is the name of the disk type, not URL.
                  "diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB.
                  "sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
                      #
                      # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-8 to use the latest Debian 8 image:
                      #
                      # projects/debian-cloud/global/images/family/debian-8
                      #
                      # Alternatively, use a specific version of a public operating system image:
                      #
                      # projects/debian-cloud/global/images/debian-8-jessie-vYYYYMMDD
                      #
                      # To create a disk with a private image that you created, specify the image name in the following format:
                      #
                      # global/images/my-private-image
                      #
                      # You can also specify a private image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
                      #
                      # global/images/family/my-private-family
                      #
                      # If the source image is deleted later, this field will not be set.
                  "diskStorageType": "A String", # [Deprecated] Storage type of the disk.
                },
                "autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
                "index": 42, # Assigns a zero-based index to this disk, where 0 is reserved for the boot disk. For example, if you have many disks attached to an instance, each disk would have a unique index number. If not specified, the server will choose an appropriate value.
                "boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
                "licenses": [ # [Output Only] Any valid publicly visible licenses.
                  "A String",
                ],
                "mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
                "interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance.
                "type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
                "source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
                    #
                    # If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
                    #
                    # Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
              },
            ],
            "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
          },
        ],
        "warning": { # [Output Only] Informational warning which replaces the list of instances when the list is empty.
          "message": "A String", # [Output Only] A human-readable description of the warning code.
          "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
          "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
              # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
            {
              "value": "A String", # [Output Only] A warning data value corresponding to the key.
              "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
            },
          ],
        },
      },
    },
    "kind": "compute#instanceAggregatedList", # [Output Only] Type of resource. Always compute#instanceAggregatedList for aggregated lists of Instance resources.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  }
aggregatedList_next(previous_request, previous_response)
Retrieves the next page of results.

Args:
  previous_request: The request for the previous page. (required)
  previous_response: The response from the request for the previous page. (required)

Returns:
  A request object that you can call 'execute()' on to request the next
  page. Returns None if there are no more items in the collection.
    
attachDisk(project, zone, instance, body)
Attaches an existing Disk resource to an instance. You must first create the disk before you can attach it. It is not possible to create and attach a disk at the same time. For more information, read Adding a persistent disk to your instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, The instance name for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{ # An instance-attached disk resource.
  "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
      # 
      # If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
      # 
      # If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
      # 
      # If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
      # 
      # Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
    "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
    "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
    "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
        #
        # The key must meet the following requirements before you can provide it to Compute Engine:
        # - The key is wrapped using a RSA public key certificate provided by Google.
        # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
        # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
  },
  "deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
      # 
      # If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disks-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
  "kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
  "initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
      # 
      # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
      #
      # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
    "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
        #
        # Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
      "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
      "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
      "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
          #
          # The key must meet the following requirements before you can provide it to Compute Engine:
          # - The key is wrapped using a RSA public key certificate provided by Google.
          # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
          # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
    },
    "diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance.
    "diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
        #
        # https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
        #
        # Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
        # - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
        # - projects/project/zones/zone/diskTypes/diskType
        # - zones/zone/diskTypes/diskType  Note that for InstanceTemplate, this is the name of the disk type, not URL.
    "diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB.
    "sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
        #
        # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-8 to use the latest Debian 8 image:
        #
        # projects/debian-cloud/global/images/family/debian-8
        #
        # Alternatively, use a specific version of a public operating system image:
        #
        # projects/debian-cloud/global/images/debian-8-jessie-vYYYYMMDD
        #
        # To create a disk with a private image that you created, specify the image name in the following format:
        #
        # global/images/my-private-image
        #
        # You can also specify a private image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
        #
        # global/images/family/my-private-family
        #
        # If the source image is deleted later, this field will not be set.
    "diskStorageType": "A String", # [Deprecated] Storage type of the disk.
  },
  "autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
  "index": 42, # Assigns a zero-based index to this disk, where 0 is reserved for the boot disk. For example, if you have many disks attached to an instance, each disk would have a unique index number. If not specified, the server will choose an appropriate value.
  "boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
  "licenses": [ # [Output Only] Any valid publicly visible licenses.
    "A String",
  ],
  "mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
  "interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance.
  "type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
  "source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
      # 
      # If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
      # 
      # Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
}


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
delete(project, zone, instance)
Deletes the specified Instance resource. For more information, see Stopping or Deleting an Instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance resource to delete. (required)

Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
deleteAccessConfig(project, zone, instance, accessConfig, networkInterface)
Deletes an access config from an instance's network interface.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, The instance name for this request. (required)
  accessConfig: string, The name of the access config to delete. (required)
  networkInterface: string, The name of the network interface. (required)

Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
detachDisk(project, zone, instance, deviceName)
Detaches a disk from an instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Instance name. (required)
  deviceName: string, Disk device name to detach. (required)

Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
get(project, zone, instance)
Returns the specified Instance resource. Get a list of available instances by making a list() request.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance resource to return. (required)

Returns:
  An object of the form:

    { # An Instance resource.
    "status": "A String", # [Output Only] The status of the instance. One of the following values: PROVISIONING, STAGING, RUNNING, STOPPING, SUSPENDING, SUSPENDED, and TERMINATED.
    "guestAccelerators": [ # List of the type and count of accelerator cards attached to the instance.
      { # A specification of the type and number of accelerator cards attached to the instance.
        "acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
        "acceleratorType": "A String", # Full or partial URL of the accelerator type resource to expose to this instance.
      },
    ],
    "labels": { # Labels to apply to this instance. These can be later modified by the setLabels method.
      "a_key": "A String",
    },
    "scheduling": { # Sets the scheduling options for an Instance. # Sets the scheduling options for this instance.
      "automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
          #
          # By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
      "preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
      "onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
    },
    "minCpuPlatform": "A String", # Minimum cpu/platform to be used by this instance. We may schedule on the specified or later cpu/platform.
    "serviceAccounts": [ # A list of service accounts, with their specified scopes, authorized for this instance. Only one service account per VM instance is supported.
        #
        # Service accounts generate access tokens that can be accessed through the metadata server and used to authenticate applications on the instance. See Service Accounts for more information.
      { # A service account.
        "scopes": [ # The list of scopes to be made available for this service account.
          "A String",
        ],
        "email": "A String", # Email address of the service account.
      },
    ],
    "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "networkInterfaces": [ # An array of configurations for this interface. This specifies how this interface is configured to interact with other network services, such as connecting to the internet. Only one interface is supported per instance.
      { # A network interface resource attached to an instance.
        "kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
        "aliasIpRanges": [ # An array of alias IP ranges for this network interface. Can only be specified for network interfaces on subnet-mode networks.
          { # An alias IP range attached to an instance's network interface.
            "subnetworkRangeName": "A String", # Optional subnetwork secondary range name specifying the secondary range from which to allocate the IP CIDR range for this alias IP range. If left unspecified, the primary range of the subnetwork will be used.
            "ipCidrRange": "A String", # The IP CIDR range represented by this alias IP range. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (e.g. 10.2.3.4), a netmask (e.g. /24) or a CIDR format string (e.g. 10.1.2.0/24).
          },
        ],
        "network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
            #
            # This field is optional when creating a firewall rule. If not specified when creating a firewall rule, the default network global/networks/default is used.
            #
            # If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
            # - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
            # - projects/project/global/networks/network
            # - global/networks/default
        "accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
          { # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
            "kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
            "type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
            "name": "A String", # The name of this access configuration. The default and recommended name is External NAT but you can use any arbitrary string you would like. For example, My external IP or Network Access.
            "natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
          },
        ],
        "networkIP": "A String", # An IPv4 internal network address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
        "subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not provide this property. If the network is in auto subnet mode, providing the subnetwork is optional. If the network is in custom subnet mode, then this field should be specified. If you specify this property, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
            # - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
            # - regions/region/subnetworks/subnetwork
        "name": "A String", # [Output Only] The name of the network interface, generated by the server. For network devices, these are eth0, eth1, etc.
      },
    ],
    "startRestricted": True or False, # [Output Only] Whether a VM has been restricted for start because Compute Engine has detected suspicious activity.
    "zone": "A String", # [Output Only] URL of the zone where the instance resides.
    "statusMessage": "A String", # [Output Only] An optional, human-readable explanation of the status.
    "metadata": { # A metadata key/value entry. # The metadata key/value pairs assigned to this instance. This includes custom metadata and predefined keys.
      "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
        {
          "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 32768 bytes.
          "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
        },
      ],
      "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
      "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
    },
    "cpuPlatform": "A String", # [Output Only] The CPU platform used by this instance.
    "canIpForward": True or False, # Allows this instance to send and receive packets with non-matching destination or source IPs. This is required if you plan to use this instance to forward routes. For more information, see Enabling IP Forwarding.
    "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
    "tags": { # A set of instance tags. # A list of tags to apply to this instance. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during instance creation. The tags can be later modified by the setTags method. Each tag within the list must comply with RFC1035.
      "items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
        "A String",
      ],
      "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
          #
          # To see the latest fingerprint, make get() request to the instance.
    },
    "labelFingerprint": "A String", # A fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
        #
        # To see the latest fingerprint, make get() request to the instance.
    "machineType": "A String", # Full or partial URL of the machine type resource to use for this instance, in the format: zones/zone/machineTypes/machine-type. This is provided by the client when the instance is created. For example, the following is a valid partial url to a predefined machine type:
        #
        # zones/us-central1-f/machineTypes/n1-standard-1
        #
        # To create a custom machine type, provide a URL to a machine type in the following format, where CPUS is 1 or an even number up to 32 (2, 4, 6, ... 24, etc), and MEMORY is the total memory for this instance. Memory must be a multiple of 256 MB and must be supplied in MB (e.g. 5 GB of memory is 5120 MB):
        #
        # zones/zone/machineTypes/custom-CPUS-MEMORY
        #
        # For example: zones/us-central1-f/machineTypes/custom-4-5120
        #
        # For a full list of restrictions, read the Specifications for custom machine types.
    "kind": "compute#instance", # [Output Only] Type of the resource. Always compute#instance for instances.
    "name": "A String", # The name of the resource, provided by the client when initially creating the resource. The resource name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
    "disks": [ # Array of disks associated with this instance. Persistent disks must be created before you can assign them.
      { # An instance-attached disk resource.
        "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
            #
            # If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
            #
            # If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
            #
            # If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
            #
            # Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
          "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
          "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
          "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
              #
              # The key must meet the following requirements before you can provide it to Compute Engine:
              # - The key is wrapped using a RSA public key certificate provided by Google.
              # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
              # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
        },
        "deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
            #
            # If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disks-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
        "kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
        "initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
            #
            # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
            #
            # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
          "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
              #
              # Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
            "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
            "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
            "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
                #
                # The key must meet the following requirements before you can provide it to Compute Engine:
                # - The key is wrapped using a RSA public key certificate provided by Google.
                # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
                # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
          },
          "diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance.
          "diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
              #
              # https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
              #
              # Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
              # - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
              # - projects/project/zones/zone/diskTypes/diskType
              # - zones/zone/diskTypes/diskType  Note that for InstanceTemplate, this is the name of the disk type, not URL.
          "diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB.
          "sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
              #
              # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-8 to use the latest Debian 8 image:
              #
              # projects/debian-cloud/global/images/family/debian-8
              #
              # Alternatively, use a specific version of a public operating system image:
              #
              # projects/debian-cloud/global/images/debian-8-jessie-vYYYYMMDD
              #
              # To create a disk with a private image that you created, specify the image name in the following format:
              #
              # global/images/my-private-image
              #
              # You can also specify a private image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
              #
              # global/images/family/my-private-family
              #
              # If the source image is deleted later, this field will not be set.
          "diskStorageType": "A String", # [Deprecated] Storage type of the disk.
        },
        "autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
        "index": 42, # Assigns a zero-based index to this disk, where 0 is reserved for the boot disk. For example, if you have many disks attached to an instance, each disk would have a unique index number. If not specified, the server will choose an appropriate value.
        "boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
        "licenses": [ # [Output Only] Any valid publicly visible licenses.
          "A String",
        ],
        "mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
        "interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance.
        "type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
        "source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
            #
            # If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
            #
            # Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
      },
    ],
    "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  }
getSerialPortOutput(project, zone, instance, start=None, port=None)
Returns the specified instance's serial port output.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance scoping this request. (required)
  start: string, Returns output starting from a specific byte position. Use this to page through output when the output is too large to return in a single request. For the initial request, leave this field unspecified. For subsequent calls, this field should be set to the next value returned in the previous call.
  port: integer, Specifies which COM or serial port to retrieve data from.

Returns:
  An object of the form:

    { # An instance's serial console output.
    "start": "A String", # The starting byte position of the output that was returned. This should match the start parameter sent with the request. If the serial console output exceeds the size of the buffer, older output will be overwritten by newer content and the start values will be mismatched.
    "kind": "compute#serialPortOutput", # [Output Only] Type of the resource. Always compute#serialPortOutput for serial port output.
    "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
    "contents": "A String", # [Output Only] The contents of the console output.
    "next": "A String", # [Output Only] The position of the next byte of content from the serial console output. Use this value in the next request as the start parameter.
  }
insert(project, zone, body)
Creates an instance resource in the specified project using the data included in the request.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{ # An Instance resource.
  "status": "A String", # [Output Only] The status of the instance. One of the following values: PROVISIONING, STAGING, RUNNING, STOPPING, SUSPENDING, SUSPENDED, and TERMINATED.
  "guestAccelerators": [ # List of the type and count of accelerator cards attached to the instance.
    { # A specification of the type and number of accelerator cards attached to the instance.
      "acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
      "acceleratorType": "A String", # Full or partial URL of the accelerator type resource to expose to this instance.
    },
  ],
  "labels": { # Labels to apply to this instance. These can be later modified by the setLabels method.
    "a_key": "A String",
  },
  "scheduling": { # Sets the scheduling options for an Instance. # Sets the scheduling options for this instance.
    "automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
        #
        # By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
    "preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
    "onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
  },
  "minCpuPlatform": "A String", # Minimum cpu/platform to be used by this instance. We may schedule on the specified or later cpu/platform.
  "serviceAccounts": [ # A list of service accounts, with their specified scopes, authorized for this instance. Only one service account per VM instance is supported.
      # 
      # Service accounts generate access tokens that can be accessed through the metadata server and used to authenticate applications on the instance. See Service Accounts for more information.
    { # A service account.
      "scopes": [ # The list of scopes to be made available for this service account.
        "A String",
      ],
      "email": "A String", # Email address of the service account.
    },
  ],
  "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
  "networkInterfaces": [ # An array of configurations for this interface. This specifies how this interface is configured to interact with other network services, such as connecting to the internet. Only one interface is supported per instance.
    { # A network interface resource attached to an instance.
      "kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
      "aliasIpRanges": [ # An array of alias IP ranges for this network interface. Can only be specified for network interfaces on subnet-mode networks.
        { # An alias IP range attached to an instance's network interface.
          "subnetworkRangeName": "A String", # Optional subnetwork secondary range name specifying the secondary range from which to allocate the IP CIDR range for this alias IP range. If left unspecified, the primary range of the subnetwork will be used.
          "ipCidrRange": "A String", # The IP CIDR range represented by this alias IP range. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (e.g. 10.2.3.4), a netmask (e.g. /24) or a CIDR format string (e.g. 10.1.2.0/24).
        },
      ],
      "network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
          #
          # This field is optional when creating a firewall rule. If not specified when creating a firewall rule, the default network global/networks/default is used.
          #
          # If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
          # - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
          # - projects/project/global/networks/network
          # - global/networks/default
      "accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
        { # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
          "kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
          "type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
          "name": "A String", # The name of this access configuration. The default and recommended name is External NAT but you can use any arbitrary string you would like. For example, My external IP or Network Access.
          "natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
        },
      ],
      "networkIP": "A String", # An IPv4 internal network address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
      "subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not provide this property. If the network is in auto subnet mode, providing the subnetwork is optional. If the network is in custom subnet mode, then this field should be specified. If you specify this property, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
          # - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
          # - regions/region/subnetworks/subnetwork
      "name": "A String", # [Output Only] The name of the network interface, generated by the server. For network devices, these are eth0, eth1, etc.
    },
  ],
  "startRestricted": True or False, # [Output Only] Whether a VM has been restricted for start because Compute Engine has detected suspicious activity.
  "zone": "A String", # [Output Only] URL of the zone where the instance resides.
  "statusMessage": "A String", # [Output Only] An optional, human-readable explanation of the status.
  "metadata": { # A metadata key/value entry. # The metadata key/value pairs assigned to this instance. This includes custom metadata and predefined keys.
    "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
      {
        "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 32768 bytes.
        "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
      },
    ],
    "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
    "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
  },
  "cpuPlatform": "A String", # [Output Only] The CPU platform used by this instance.
  "canIpForward": True or False, # Allows this instance to send and receive packets with non-matching destination or source IPs. This is required if you plan to use this instance to forward routes. For more information, see Enabling IP Forwarding.
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "tags": { # A set of instance tags. # A list of tags to apply to this instance. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during instance creation. The tags can be later modified by the setTags method. Each tag within the list must comply with RFC1035.
    "items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
      "A String",
    ],
    "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
        #
        # To see the latest fingerprint, make get() request to the instance.
  },
  "labelFingerprint": "A String", # A fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
      # 
      # To see the latest fingerprint, make get() request to the instance.
  "machineType": "A String", # Full or partial URL of the machine type resource to use for this instance, in the format: zones/zone/machineTypes/machine-type. This is provided by the client when the instance is created. For example, the following is a valid partial url to a predefined machine type:
      # 
      # zones/us-central1-f/machineTypes/n1-standard-1
      # 
      # To create a custom machine type, provide a URL to a machine type in the following format, where CPUS is 1 or an even number up to 32 (2, 4, 6, ... 24, etc), and MEMORY is the total memory for this instance. Memory must be a multiple of 256 MB and must be supplied in MB (e.g. 5 GB of memory is 5120 MB):
      # 
      # zones/zone/machineTypes/custom-CPUS-MEMORY
      # 
      # For example: zones/us-central1-f/machineTypes/custom-4-5120
      # 
      # For a full list of restrictions, read the Specifications for custom machine types.
  "kind": "compute#instance", # [Output Only] Type of the resource. Always compute#instance for instances.
  "name": "A String", # The name of the resource, provided by the client when initially creating the resource. The resource name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
  "disks": [ # Array of disks associated with this instance. Persistent disks must be created before you can assign them.
    { # An instance-attached disk resource.
      "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
          #
          # If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
          #
          # If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
          #
          # If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
          #
          # Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
        "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
        "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
        "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
            #
            # The key must meet the following requirements before you can provide it to Compute Engine:
            # - The key is wrapped using a RSA public key certificate provided by Google.
            # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
            # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
      },
      "deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
          #
          # If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disks-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
      "kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
      "initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
          #
          # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
          #
          # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
        "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
            #
            # Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
          "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
          "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
          "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
              #
              # The key must meet the following requirements before you can provide it to Compute Engine:
              # - The key is wrapped using a RSA public key certificate provided by Google.
              # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
              # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
        },
        "diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance.
        "diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
            #
            # https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
            #
            # Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
            # - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
            # - projects/project/zones/zone/diskTypes/diskType
            # - zones/zone/diskTypes/diskType  Note that for InstanceTemplate, this is the name of the disk type, not URL.
        "diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB.
        "sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
            #
            # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-8 to use the latest Debian 8 image:
            #
            # projects/debian-cloud/global/images/family/debian-8
            #
            # Alternatively, use a specific version of a public operating system image:
            #
            # projects/debian-cloud/global/images/debian-8-jessie-vYYYYMMDD
            #
            # To create a disk with a private image that you created, specify the image name in the following format:
            #
            # global/images/my-private-image
            #
            # You can also specify a private image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
            #
            # global/images/family/my-private-family
            #
            # If the source image is deleted later, this field will not be set.
        "diskStorageType": "A String", # [Deprecated] Storage type of the disk.
      },
      "autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
      "index": 42, # Assigns a zero-based index to this disk, where 0 is reserved for the boot disk. For example, if you have many disks attached to an instance, each disk would have a unique index number. If not specified, the server will choose an appropriate value.
      "boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
      "licenses": [ # [Output Only] Any valid publicly visible licenses.
        "A String",
      ],
      "mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
      "interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance.
      "type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
      "source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
          #
          # If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
          #
          # Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
    },
  ],
  "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
list(project, zone, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves the list of instances contained within the specified zone.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.

You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.

Currently, only sorting by name or creationTimestamp desc is supported.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
  pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
  filter: string, Sets a filter expression for filtering listed resources, in the form filter={expression}. Your {expression} must be in the format: field_name comparison_string literal_string.

The field_name is the name of the field you want to compare. Only atomic field types are supported (string, number, boolean). The comparison_string must be either eq (equals) or ne (not equals). The literal_string is the string value to filter to. The literal value must be valid for the type of field you are filtering by (string, number, boolean). For string fields, the literal value is interpreted as a regular expression using RE2 syntax. The literal value must match the entire field.

For example, to filter for instances that do not have a name of example-instance, you would use filter=name ne example-instance.

You can filter on nested fields. For example, you could filter on instances that have set the scheduling.automaticRestart field to true. Use filtering on nested fields to take advantage of labels to organize and search for results based on label values.

To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart eq true) (zone eq us-central1-f). Multiple expressions are treated as AND expressions, meaning that resources must match all expressions to pass the filters.

Returns:
  An object of the form:

    { # Contains a list of instances.
    "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
    "items": [ # [Output Only] A list of instances.
      { # An Instance resource.
        "status": "A String", # [Output Only] The status of the instance. One of the following values: PROVISIONING, STAGING, RUNNING, STOPPING, SUSPENDING, SUSPENDED, and TERMINATED.
        "guestAccelerators": [ # List of the type and count of accelerator cards attached to the instance.
          { # A specification of the type and number of accelerator cards attached to the instance.
            "acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
            "acceleratorType": "A String", # Full or partial URL of the accelerator type resource to expose to this instance.
          },
        ],
        "labels": { # Labels to apply to this instance. These can be later modified by the setLabels method.
          "a_key": "A String",
        },
        "scheduling": { # Sets the scheduling options for an Instance. # Sets the scheduling options for this instance.
          "automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
              #
              # By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
          "preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
          "onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
        },
        "minCpuPlatform": "A String", # Minimum cpu/platform to be used by this instance. We may schedule on the specified or later cpu/platform.
        "serviceAccounts": [ # A list of service accounts, with their specified scopes, authorized for this instance. Only one service account per VM instance is supported.
            #
            # Service accounts generate access tokens that can be accessed through the metadata server and used to authenticate applications on the instance. See Service Accounts for more information.
          { # A service account.
            "scopes": [ # The list of scopes to be made available for this service account.
              "A String",
            ],
            "email": "A String", # Email address of the service account.
          },
        ],
        "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
        "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
        "networkInterfaces": [ # An array of configurations for this interface. This specifies how this interface is configured to interact with other network services, such as connecting to the internet. Only one interface is supported per instance.
          { # A network interface resource attached to an instance.
            "kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
            "aliasIpRanges": [ # An array of alias IP ranges for this network interface. Can only be specified for network interfaces on subnet-mode networks.
              { # An alias IP range attached to an instance's network interface.
                "subnetworkRangeName": "A String", # Optional subnetwork secondary range name specifying the secondary range from which to allocate the IP CIDR range for this alias IP range. If left unspecified, the primary range of the subnetwork will be used.
                "ipCidrRange": "A String", # The IP CIDR range represented by this alias IP range. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (e.g. 10.2.3.4), a netmask (e.g. /24) or a CIDR format string (e.g. 10.1.2.0/24).
              },
            ],
            "network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
                #
                # This field is optional when creating a firewall rule. If not specified when creating a firewall rule, the default network global/networks/default is used.
                #
                # If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
                # - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
                # - projects/project/global/networks/network
                # - global/networks/default
            "accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
              { # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
                "kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
                "type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
                "name": "A String", # The name of this access configuration. The default and recommended name is External NAT but you can use any arbitrary string you would like. For example, My external IP or Network Access.
                "natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
              },
            ],
            "networkIP": "A String", # An IPv4 internal network address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
            "subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not provide this property. If the network is in auto subnet mode, providing the subnetwork is optional. If the network is in custom subnet mode, then this field should be specified. If you specify this property, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
                # - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
                # - regions/region/subnetworks/subnetwork
            "name": "A String", # [Output Only] The name of the network interface, generated by the server. For network devices, these are eth0, eth1, etc.
          },
        ],
        "startRestricted": True or False, # [Output Only] Whether a VM has been restricted for start because Compute Engine has detected suspicious activity.
        "zone": "A String", # [Output Only] URL of the zone where the instance resides.
        "statusMessage": "A String", # [Output Only] An optional, human-readable explanation of the status.
        "metadata": { # A metadata key/value entry. # The metadata key/value pairs assigned to this instance. This includes custom metadata and predefined keys.
          "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
            {
              "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 32768 bytes.
              "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
            },
          ],
          "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
          "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
        },
        "cpuPlatform": "A String", # [Output Only] The CPU platform used by this instance.
        "canIpForward": True or False, # Allows this instance to send and receive packets with non-matching destination or source IPs. This is required if you plan to use this instance to forward routes. For more information, see Enabling IP Forwarding.
        "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
        "tags": { # A set of instance tags. # A list of tags to apply to this instance. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during instance creation. The tags can be later modified by the setTags method. Each tag within the list must comply with RFC1035.
          "items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
            "A String",
          ],
          "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
              #
              # To see the latest fingerprint, make get() request to the instance.
        },
        "labelFingerprint": "A String", # A fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
            #
            # To see the latest fingerprint, make get() request to the instance.
        "machineType": "A String", # Full or partial URL of the machine type resource to use for this instance, in the format: zones/zone/machineTypes/machine-type. This is provided by the client when the instance is created. For example, the following is a valid partial url to a predefined machine type:
            #
            # zones/us-central1-f/machineTypes/n1-standard-1
            #
            # To create a custom machine type, provide a URL to a machine type in the following format, where CPUS is 1 or an even number up to 32 (2, 4, 6, ... 24, etc), and MEMORY is the total memory for this instance. Memory must be a multiple of 256 MB and must be supplied in MB (e.g. 5 GB of memory is 5120 MB):
            #
            # zones/zone/machineTypes/custom-CPUS-MEMORY
            #
            # For example: zones/us-central1-f/machineTypes/custom-4-5120
            #
            # For a full list of restrictions, read the Specifications for custom machine types.
        "kind": "compute#instance", # [Output Only] Type of the resource. Always compute#instance for instances.
        "name": "A String", # The name of the resource, provided by the client when initially creating the resource. The resource name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
        "disks": [ # Array of disks associated with this instance. Persistent disks must be created before you can assign them.
          { # An instance-attached disk resource.
            "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
                #
                # If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
                #
                # If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
                #
                # If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
                #
                # Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
              "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
              "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
              "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
                  #
                  # The key must meet the following requirements before you can provide it to Compute Engine:
                  # - The key is wrapped using a RSA public key certificate provided by Google.
                  # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
                  # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
            },
            "deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
                #
                # If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disks-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
            "kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
            "initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
                #
                # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
                #
                # This property is mutually exclusive with the source property; you can only define one or the other, but not both.
              "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
                  #
                  # Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
                "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
                "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
                "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
                    #
                    # The key must meet the following requirements before you can provide it to Compute Engine:
                    # - The key is wrapped using a RSA public key certificate provided by Google.
                    # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
                    # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
              },
              "diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance.
              "diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
                  #
                  # https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
                  #
                  # Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
                  # - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
                  # - projects/project/zones/zone/diskTypes/diskType
                  # - zones/zone/diskTypes/diskType  Note that for InstanceTemplate, this is the name of the disk type, not URL.
              "diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB.
              "sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
                  #
                  # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-8 to use the latest Debian 8 image:
                  #
                  # projects/debian-cloud/global/images/family/debian-8
                  #
                  # Alternatively, use a specific version of a public operating system image:
                  #
                  # projects/debian-cloud/global/images/debian-8-jessie-vYYYYMMDD
                  #
                  # To create a disk with a private image that you created, specify the image name in the following format:
                  #
                  # global/images/my-private-image
                  #
                  # You can also specify a private image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
                  #
                  # global/images/family/my-private-family
                  #
                  # If the source image is deleted later, this field will not be set.
              "diskStorageType": "A String", # [Deprecated] Storage type of the disk.
            },
            "autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
            "index": 42, # Assigns a zero-based index to this disk, where 0 is reserved for the boot disk. For example, if you have many disks attached to an instance, each disk would have a unique index number. If not specified, the server will choose an appropriate value.
            "boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
            "licenses": [ # [Output Only] Any valid publicly visible licenses.
              "A String",
            ],
            "mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
            "interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance.
            "type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
            "source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or disks.source is required.
                #
                # If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
                #
                # Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
          },
        ],
        "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
      },
    ],
    "kind": "compute#instanceList", # [Output Only] Type of resource. Always compute#instanceList for lists of Instance resources.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  }
listReferrers(project, zone, instance, orderBy=None, filter=None, maxResults=None, pageToken=None)
Retrieves the list of referrers to instances contained within the specified zone.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the target instance scoping this request, or '-' if the request should span over all instances in the container. (required)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.

You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.

Currently, only sorting by name or creationTimestamp desc is supported.
  filter: string, Sets a filter expression for filtering listed resources, in the form filter={expression}. Your {expression} must be in the format: field_name comparison_string literal_string.

The field_name is the name of the field you want to compare. Only atomic field types are supported (string, number, boolean). The comparison_string must be either eq (equals) or ne (not equals). The literal_string is the string value to filter to. The literal value must be valid for the type of field you are filtering by (string, number, boolean). For string fields, the literal value is interpreted as a regular expression using RE2 syntax. The literal value must match the entire field.

For example, to filter for instances that do not have a name of example-instance, you would use filter=name ne example-instance.

You can filter on nested fields. For example, you could filter on instances that have set the scheduling.automaticRestart field to true. Use filtering on nested fields to take advantage of labels to organize and search for results based on label values.

To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart eq true) (zone eq us-central1-f). Multiple expressions are treated as AND expressions, meaning that resources must match all expressions to pass the filters.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
  pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.

Returns:
  An object of the form:

    { # Contains a list of instance referrers.
    "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
    "items": [ # [Output Only] A list of referrers.
      { # Represents a reference to a resource.
        "referrer": "A String", # URL of the resource which refers to the target.
        "kind": "compute#reference", # [Output Only] Type of the resource. Always compute#reference for references.
        "referenceType": "A String", # A description of the reference type with no implied semantics. Possible values include:
            # - MEMBER_OF
        "target": "A String", # URL of the resource to which this reference points.
      },
    ],
    "kind": "compute#instanceListReferrers", # [Output Only] Type of resource. Always compute#instanceListReferrers for lists of Instance referrers.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  }
listReferrers_next(previous_request, previous_response)
Retrieves the next page of results.

Args:
  previous_request: The request for the previous page. (required)
  previous_response: The response from the request for the previous page. (required)

Returns:
  A request object that you can call 'execute()' on to request the next
  page. Returns None if there are no more items in the collection.
    
list_next(previous_request, previous_response)
Retrieves the next page of results.

Args:
  previous_request: The request for the previous page. (required)
  previous_response: The response from the request for the previous page. (required)

Returns:
  A request object that you can call 'execute()' on to request the next
  page. Returns None if there are no more items in the collection.
    
reset(project, zone, instance)
Performs a reset on the instance. For more information, see Resetting an instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance scoping this request. (required)

Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setDiskAutoDelete(project, zone, instance, autoDelete, deviceName)
Sets the auto-delete flag for a disk attached to an instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, The instance name. (required)
  autoDelete: boolean, Whether to auto-delete the disk when the instance is deleted. (required)
  deviceName: string, The device name of the disk to modify. (required)

Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setLabels(project, zone, instance, body)
Sets labels on an instance. To learn more about labels, read the Labeling or Tagging Resources documentation.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance scoping this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "labelFingerprint": "A String", # Fingerprint of the previous set of labels for this resource, used to prevent conflicts. Provide the latest fingerprint value when making a request to add or change labels.
    "labels": {
      "a_key": "A String",
    },
  }


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setMachineResources(project, zone, instance, body)
Changes the number and/or type of accelerator for a stopped instance to the values specified in the request.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance scoping this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "guestAccelerators": [ # List of the type and count of accelerator cards attached to the instance.
      { # A specification of the type and number of accelerator cards attached to the instance.
        "acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
        "acceleratorType": "A String", # Full or partial URL of the accelerator type resource to expose to this instance.
      },
    ],
  }


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setMachineType(project, zone, instance, body)
Changes the machine type for a stopped instance to the machine type specified in the request.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance scoping this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "machineType": "A String", # Full or partial URL of the machine type resource. See Machine Types for a full list of machine types. For example: zones/us-central1-f/machineTypes/n1-standard-1
  }


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setMetadata(project, zone, instance, body)
Sets metadata for the specified instance to the data included in the request.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance scoping this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{ # A metadata key/value entry.
  "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
    {
      "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 32768 bytes.
      "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
    },
  ],
  "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
  "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
}


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setMinCpuPlatform(project, zone, instance, body, requestId=None)
Changes the minimum cpu/platform that this instance should be started as. This is called on a stopped instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance scoping this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "minCpuPlatform": "A String", # Minimum cpu/platform this instance should be started at.
  }

  requestId: string, begin_interface: MixerMutationRequestBuilder Request ID to support idempotency.

Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setScheduling(project, zone, instance, body)
Sets an instance's scheduling options.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Instance name. (required)
  body: object, The request body. (required)
    The object takes the form of:

{ # Sets the scheduling options for an Instance.
  "automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
      # 
      # By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
  "preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
  "onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
}


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setServiceAccount(project, zone, instance, body)
Sets the service account on the instance. For more information, read Changing the service account and access scopes for an instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance resource to start. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "scopes": [ # The list of scopes to be made available for this service account.
      "A String",
    ],
    "email": "A String", # Email address of the service account.
  }


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setTags(project, zone, instance, body)
Sets tags for the specified instance to the data included in the request.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance scoping this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{ # A set of instance tags.
  "items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
    "A String",
  ],
  "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata.
      # 
      # To see the latest fingerprint, make get() request to the instance.
}


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
start(project, zone, instance)
Starts an instance that was stopped using the using the instances().stop method. For more information, see Restart an instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance resource to start. (required)

Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
startWithEncryptionKey(project, zone, instance, body)
Starts an instance that was stopped using the using the instances().stop method. For more information, see Restart an instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance resource to start. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "disks": [ # Array of disks associated with this instance that are protected with a customer-supplied encryption key.
        # 
        # In order to start the instance, the disk url and its corresponding key must be provided.
        # 
        # If the disk is not protected with a customer-supplied encryption key it should not be specified.
      {
        "diskEncryptionKey": { # Represents a customer-supplied encryption key # Decrypts data associated with the disk with a customer-supplied encryption key.
          "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
          "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
          "rsaEncryptedKey": "A String", # Specifies an RFC 4648 base64 encoded, RSA-wrapped 2048-bit customer-supplied encryption key to either encrypt or decrypt this resource.
              #
              # The key must meet the following requirements before you can provide it to Compute Engine:
              # - The key is wrapped using a RSA public key certificate provided by Google.
              # - After being wrapped, the key must be encoded in RFC 4648 base64 encoding.  Get the RSA public key certificate provided by Google at:
              # https://cloud-certs.storage.googleapis.com/google-cloud-csek-ingress.pem
        },
        "source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. This field is only applicable for persistent disks.
      },
    ],
  }


Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
stop(project, zone, instance)
Stops a running instance, shutting it down cleanly, and allows you to restart the instance at a later time. Stopped instances do not incur per-minute, virtual machine usage charges while they are stopped, but any resources that the virtual machine is using, such as persistent disks and static IP addresses, will continue to be charged until they are deleted. For more information, see Stopping an instance.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  instance: string, Name of the instance resource to stop. (required)

Returns:
  An object of the form:

    { # An Operation resource, used to manage asynchronous API requests.
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] Reserved for future use.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only available when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the resource.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only available when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
testIamPermissions(project, zone, resource, body)
Returns permissions that a caller has on the specified resource.

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  resource: string, Name of the resource for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "permissions": [ # The set of permissions to check for the 'resource'. Permissions with wildcards (such as '*' or 'storage.*') are not allowed.
      "A String",
    ],
  }


Returns:
  An object of the form:

    {
    "permissions": [ # A subset of `TestPermissionsRequest.permissions` that the caller is allowed.
      "A String",
    ],
  }