Enable a service so it can be used with a project.
List enabled services for the specified consumer.
Retrieves the next page of results.
list(parent, pageToken=None, x__xgafv=None, pageSize=None)
List enabled services for the specified consumer.
Args:
parent: string, List enabled services for the specified parent.
An example valid parent would be:
- projects/my-project (required)
pageToken: string, Token identifying which result to start with; returned by a previous list
call.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
pageSize: integer, Requested size of the next page of data.
Returns:
An object of the form:
{ # Response message for `ListEnabledServices` method.
"services": [ # Services enabled for the specified parent.
{ # The published version of a Service that is managed by
# Google Service Management.
"name": "A String", # The resource name of the service.
#
# A valid name would be:
# - services/serviceuser.googleapis.com
"service": { # `Service` is the root object of Google service configuration schema. It # The service's published configuration.
# describes basic information about a service, such as the name and the
# title, and delegates other aspects to sub-sections. Each sub-section is
# either a proto message or a repeated proto message that configures a
# specific aspect, such as auth. See each proto message definition for details.
#
# Example:
#
# type: google.api.Service
# config_version: 3
# name: calendar.googleapis.com
# title: Google Calendar API
# apis:
# - name: google.calendar.v3.Calendar
# authentication:
# providers:
# - id: google_calendar_auth
# jwks_uri: https://www.googleapis.com/oauth2/v1/certs
# issuer: https://securetoken.google.com
# rules:
# - selector: "*"
# requirements:
# provider_id: google_calendar_auth
"control": { # Selects and configures the service controller used by the service. The # Configuration for the service control plane.
# service controller handles features like abuse, quota, billing, logging,
# monitoring, etc.
"environment": "A String", # The service control environment to use. If empty, no control plane
# feature (like quota and billing) will be enabled.
},
"monitoredResources": [ # Defines the monitored resources used by this service. This is required
# by the Service.monitoring and Service.logging configurations.
{ # An object that describes the schema of a MonitoredResource object using a
# type name and a set of labels. For example, the monitored resource
# descriptor for Google Compute Engine VM instances has a type of
# `"gce_instance"` and specifies the use of the labels `"instance_id"` and
# `"zone"` to identify particular VM instances.
#
# Different APIs can support different monitored resource types. APIs generally
# provide a `list` method that returns the monitored resource descriptors used
# by the API.
"type": "A String", # Required. The monitored resource type. For example, the type
# `"cloudsql_database"` represents databases in Google Cloud SQL.
# The maximum length of this value is 256 characters.
"labels": [ # Required. A set of labels used to describe instances of this monitored
# resource type. For example, an individual Google Cloud SQL database is
# identified by values for the labels `"database_id"` and `"zone"`.
{ # A description of a label.
"valueType": "A String", # The type of data that can be assigned to the label.
"description": "A String", # A human-readable description for the label.
"key": "A String", # The label key.
},
],
"displayName": "A String", # Optional. A concise name for the monitored resource type that might be
# displayed in user interfaces. It should be a Title Cased Noun Phrase,
# without any article or other determiners. For example,
# `"Google Cloud SQL Database"`.
"name": "A String", # Optional. The resource name of the monitored resource descriptor:
# `"projects/{project_id}/monitoredResourceDescriptors/{type}"` where
# {type} is the value of the `type` field in this object and
# {project_id} is a project ID that provides API-specific context for
# accessing the type. APIs that do not use project information can use the
# resource name format `"monitoredResourceDescriptors/{type}"`.
"description": "A String", # Optional. A detailed description of the monitored resource type that might
# be used in documentation.
},
],
"logs": [ # Defines the logs used by this service.
{ # A description of a log type. Example in YAML format:
#
# - name: library.googleapis.com/activity_history
# description: The history of borrowing and returning library items.
# display_name: Activity
# labels:
# - key: /customer_id
# description: Identifier of a library customer
"labels": [ # The set of labels that are available to describe a specific log entry.
# Runtime requests that contain labels not specified here are
# considered invalid.
{ # A description of a label.
"valueType": "A String", # The type of data that can be assigned to the label.
"description": "A String", # A human-readable description for the label.
"key": "A String", # The label key.
},
],
"displayName": "A String", # The human-readable name for this log. This information appears on
# the user interface and should be concise.
"name": "A String", # The name of the log. It must be less than 512 characters long and can
# include the following characters: upper- and lower-case alphanumeric
# characters [A-Za-z0-9], and punctuation characters including
# slash, underscore, hyphen, period [/_-.].
"description": "A String", # A human-readable description of this log. This information appears in
# the documentation and can contain details.
},
],
"systemParameters": { # ### System parameter configuration # System parameter configuration.
#
# A system parameter is a special kind of parameter defined by the API
# system, not by an individual API. It is typically mapped to an HTTP header
# and/or a URL query parameter. This configuration specifies which methods
# change the names of the system parameters.
"rules": [ # Define system parameters.
#
# The parameters defined here will override the default parameters
# implemented by the system. If this field is missing from the service
# config, default system parameters will be used. Default system parameters
# and names is implementation-dependent.
#
# Example: define api key for all methods
#
# system_parameters
# rules:
# - selector: "*"
# parameters:
# - name: api_key
# url_query_parameter: api_key
#
#
# Example: define 2 api key names for a specific method.
#
# system_parameters
# rules:
# - selector: "/ListShelves"
# parameters:
# - name: api_key
# http_header: Api-Key1
# - name: api_key
# http_header: Api-Key2
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # Define a system parameter rule mapping system parameter definitions to
# methods.
"parameters": [ # Define parameters. Multiple names may be defined for a parameter.
# For a given method call, only one of them should be used. If multiple
# names are used the behavior is implementation-dependent.
# If none of the specified names are present the behavior is
# parameter-dependent.
{ # Define a parameter's name and location. The parameter may be passed as either
# an HTTP header or a URL query parameter, and if both are passed the behavior
# is implementation-dependent.
"urlQueryParameter": "A String", # Define the URL query parameter name to use for the parameter. It is case
# sensitive.
"httpHeader": "A String", # Define the HTTP header name to use for the parameter. It is case
# insensitive.
"name": "A String", # Define the name of the parameter, such as "api_key" . It is case sensitive.
},
],
"selector": "A String", # Selects the methods to which this rule applies. Use '*' to indicate all
# methods in all APIs.
#
# Refer to selector for syntax details.
},
],
},
"id": "A String", # A unique ID for a specific instance of this message, typically assigned
# by the client for tracking purpose. If empty, the server may choose to
# generate one instead.
"backend": { # `Backend` defines the backend configuration for a service. # API backend configuration.
"rules": [ # A list of API backend rules that apply to individual API methods.
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # A backend rule provides configuration for an individual API element.
"selector": "A String", # Selects the methods to which this rule applies.
#
# Refer to selector for syntax details.
"minDeadline": 3.14, # Minimum deadline in seconds needed for this method. Calls having deadline
# value lower than this will be rejected.
"deadline": 3.14, # The number of seconds to wait for a response from a request. The
# default depends on the deployment context.
"address": "A String", # The address of the API backend.
},
],
},
"monitoring": { # Monitoring configuration of the service. # Monitoring configuration.
#
# The example below shows how to configure monitored resources and metrics
# for monitoring. In the example, a monitored resource and two metrics are
# defined. The `library.googleapis.com/book/returned_count` metric is sent
# to both producer and consumer projects, whereas the
# `library.googleapis.com/book/overdue_count` metric is only sent to the
# consumer project.
#
# monitored_resources:
# - type: library.googleapis.com/branch
# labels:
# - key: /city
# description: The city where the library branch is located in.
# - key: /name
# description: The name of the branch.
# metrics:
# - name: library.googleapis.com/book/returned_count
# metric_kind: DELTA
# value_type: INT64
# labels:
# - key: /customer_id
# - name: library.googleapis.com/book/overdue_count
# metric_kind: GAUGE
# value_type: INT64
# labels:
# - key: /customer_id
# monitoring:
# producer_destinations:
# - monitored_resource: library.googleapis.com/branch
# metrics:
# - library.googleapis.com/book/returned_count
# consumer_destinations:
# - monitored_resource: library.googleapis.com/branch
# metrics:
# - library.googleapis.com/book/returned_count
# - library.googleapis.com/book/overdue_count
"producerDestinations": [ # Monitoring configurations for sending metrics to the producer project.
# There can be multiple producer destinations, each one must have a
# different monitored resource type. A metric can be used in at most
# one producer destination.
{ # Configuration of a specific monitoring destination (the producer project
# or the consumer project).
"monitoredResource": "A String", # The monitored resource type. The type must be defined in
# Service.monitored_resources section.
"metrics": [ # Names of the metrics to report to this monitoring destination.
# Each name must be defined in Service.metrics section.
"A String",
],
},
],
"consumerDestinations": [ # Monitoring configurations for sending metrics to the consumer project.
# There can be multiple consumer destinations, each one must have a
# different monitored resource type. A metric can be used in at most
# one consumer destination.
{ # Configuration of a specific monitoring destination (the producer project
# or the consumer project).
"monitoredResource": "A String", # The monitored resource type. The type must be defined in
# Service.monitored_resources section.
"metrics": [ # Names of the metrics to report to this monitoring destination.
# Each name must be defined in Service.metrics section.
"A String",
],
},
],
},
"title": "A String", # The product title associated with this service.
"authentication": { # `Authentication` defines the authentication configuration for an API. # Auth configuration.
#
# Example for an API targeted for external use:
#
# name: calendar.googleapis.com
# authentication:
# providers:
# - id: google_calendar_auth
# jwks_uri: https://www.googleapis.com/oauth2/v1/certs
# issuer: https://securetoken.google.com
# rules:
# - selector: "*"
# requirements:
# provider_id: google_calendar_auth
"rules": [ # A list of authentication rules that apply to individual API methods.
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # Authentication rules for the service.
#
# By default, if a method has any authentication requirements, every request
# must include a valid credential matching one of the requirements.
# It's an error to include more than one kind of credential in a single
# request.
#
# If a method doesn't have any auth requirements, request credentials will be
# ignored.
"oauth": { # OAuth scopes are a way to define data and permissions on data. For example, # The requirements for OAuth credentials.
# there are scopes defined for "Read-only access to Google Calendar" and
# "Access to Cloud Platform". Users can consent to a scope for an application,
# giving it permission to access that data on their behalf.
#
# OAuth scope specifications should be fairly coarse grained; a user will need
# to see and understand the text description of what your scope means.
#
# In most cases: use one or at most two OAuth scopes for an entire family of
# products. If your product has multiple APIs, you should probably be sharing
# the OAuth scope across all of those APIs.
#
# When you need finer grained OAuth consent screens: talk with your product
# management about how developers will use them in practice.
#
# Please note that even though each of the canonical scopes is enough for a
# request to be accepted and passed to the backend, a request can still fail
# due to the backend requiring additional scopes or permissions.
"canonicalScopes": "A String", # The list of publicly documented OAuth scopes that are allowed access. An
# OAuth token containing any of these scopes will be accepted.
#
# Example:
#
# canonical_scopes: https://www.googleapis.com/auth/calendar,
# https://www.googleapis.com/auth/calendar.read
},
"allowWithoutCredential": True or False, # Whether to allow requests without a credential. The credential can be
# an OAuth token, Google cookies (first-party auth) or EndUserCreds.
#
# For requests without credentials, if the service control environment is
# specified, each incoming request **must** be associated with a service
# consumer. This can be done by passing an API key that belongs to a consumer
# project.
"requirements": [ # Requirements for additional authentication providers.
{ # User-defined authentication requirements, including support for
# [JSON Web Token (JWT)](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32).
"providerId": "A String", # id from authentication provider.
#
# Example:
#
# provider_id: bookstore_auth
"audiences": "A String", # NOTE: This will be deprecated soon, once AuthProvider.audiences is
# implemented and accepted in all the runtime components.
#
# The list of JWT
# [audiences](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32#section-4.1.3).
# that are allowed to access. A JWT containing any of these audiences will
# be accepted. When this setting is absent, only JWTs with audience
# "https://Service_name/API_name"
# will be accepted. For example, if no audiences are in the setting,
# LibraryService API will only accept JWTs with the following audience
# "https://library-example.googleapis.com/google.example.library.v1.LibraryService".
#
# Example:
#
# audiences: bookstore_android.apps.googleusercontent.com,
# bookstore_web.apps.googleusercontent.com
},
],
"customAuth": { # Configuration for a custom authentication provider. # Configuration for custom authentication.
"provider": "A String", # A configuration string containing connection information for the
# authentication provider, typically formatted as a SmartService string
# (go/smartservice).
},
"selector": "A String", # Selects the methods to which this rule applies.
#
# Refer to selector for syntax details.
},
],
"providers": [ # Defines a set of authentication providers that a service supports.
{ # Configuration for an anthentication provider, including support for
# [JSON Web Token (JWT)](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32).
"audiences": "A String", # The list of JWT
# [audiences](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32#section-4.1.3).
# that are allowed to access. A JWT containing any of these audiences will
# be accepted. When this setting is absent, only JWTs with audience
# "https://Service_name/API_name"
# will be accepted. For example, if no audiences are in the setting,
# LibraryService API will only accept JWTs with the following audience
# "https://library-example.googleapis.com/google.example.library.v1.LibraryService".
#
# Example:
#
# audiences: bookstore_android.apps.googleusercontent.com,
# bookstore_web.apps.googleusercontent.com
"jwksUri": "A String", # URL of the provider's public key set to validate signature of the JWT. See
# [OpenID Discovery](https://openid.net/specs/openid-connect-discovery-1_0.html#ProviderMetadata).
# Optional if the key set document:
# - can be retrieved from
# [OpenID Discovery](https://openid.net/specs/openid-connect-discovery-1_0.html
# of the issuer.
# - can be inferred from the email domain of the issuer (e.g. a Google service account).
#
# Example: https://www.googleapis.com/oauth2/v1/certs
"id": "A String", # The unique identifier of the auth provider. It will be referred to by
# `AuthRequirement.provider_id`.
#
# Example: "bookstore_auth".
"issuer": "A String", # Identifies the principal that issued the JWT. See
# https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32#section-4.1.1
# Usually a URL or an email address.
#
# Example: https://securetoken.google.com
# Example: 1234567-compute@developer.gserviceaccount.com
},
],
},
"usage": { # Configuration controlling usage of a service. # Configuration controlling usage of this service.
"rules": [ # A list of usage rules that apply to individual API methods.
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # Usage configuration rules for the service.
#
# NOTE: Under development.
#
#
# Use this rule to configure unregistered calls for the service. Unregistered
# calls are calls that do not contain consumer project identity.
# (Example: calls that do not contain an API key).
# By default, API methods do not allow unregistered calls, and each method call
# must be identified by a consumer project identity. Use this rule to
# allow/disallow unregistered calls.
#
# Example of an API that wants to allow unregistered calls for entire service.
#
# usage:
# rules:
# - selector: "*"
# allow_unregistered_calls: true
#
# Example of a method that wants to allow unregistered calls.
#
# usage:
# rules:
# - selector: "google.example.library.v1.LibraryService.CreateBook"
# allow_unregistered_calls: true
"selector": "A String", # Selects the methods to which this rule applies. Use '*' to indicate all
# methods in all APIs.
#
# Refer to selector for syntax details.
"allowUnregisteredCalls": True or False, # True, if the method allows unregistered calls; false otherwise.
},
],
"producerNotificationChannel": "A String", # The full resource name of a channel used for sending notifications to the
# service producer.
#
# Google Service Management currently only supports
# [Google Cloud Pub/Sub](https://cloud.google.com/pubsub) as a notification
# channel. To use Google Cloud Pub/Sub as the channel, this must be the name
# of a Cloud Pub/Sub topic that uses the Cloud Pub/Sub topic name format
# documented in https://cloud.google.com/pubsub/docs/overview.
"requirements": [ # Requirements that must be satisfied before a consumer project can use the
# service. Each requirement is of the form /;
# for example 'serviceusage.googleapis.com/billing-enabled'.
"A String",
],
},
"configVersion": 42, # The version of the service configuration. The config version may
# influence interpretation of the configuration, for example, to
# determine defaults. This is documented together with applicable
# options. The current default for the config version itself is `3`.
"producerProjectId": "A String", # The id of the Google developer project that owns the service.
# Members of this project can manage the service configuration,
# manage consumption of the service, etc.
"http": { # Defines the HTTP configuration for a service. It contains a list of # HTTP configuration.
# HttpRule, each specifying the mapping of an RPC method
# to one or more HTTP REST API methods.
"rules": [ # A list of HTTP configuration rules that apply to individual API methods.
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # `HttpRule` defines the mapping of an RPC method to one or more HTTP
# REST APIs. The mapping determines what portions of the request
# message are populated from the path, query parameters, or body of
# the HTTP request. The mapping is typically specified as an
# `google.api.http` annotation, see "google/api/annotations.proto"
# for details.
#
# The mapping consists of a field specifying the path template and
# method kind. The path template can refer to fields in the request
# message, as in the example below which describes a REST GET
# operation on a resource collection of messages:
#
#
# service Messaging {
# rpc GetMessage(GetMessageRequest) returns (Message) {
# option (google.api.http).get = "/v1/messages/{message_id}/{sub.subfield}";
# }
# }
# message GetMessageRequest {
# message SubMessage {
# string subfield = 1;
# }
# string message_id = 1; // mapped to the URL
# SubMessage sub = 2; // `sub.subfield` is url-mapped
# }
# message Message {
# string text = 1; // content of the resource
# }
#
# The same http annotation can alternatively be expressed inside the
# `GRPC API Configuration` YAML file.
#
# http:
# rules:
# - selector: .Messaging.GetMessage
# get: /v1/messages/{message_id}/{sub.subfield}
#
# This definition enables an automatic, bidrectional mapping of HTTP
# JSON to RPC. Example:
#
# HTTP | RPC
# -----|-----
# `GET /v1/messages/123456/foo` | `GetMessage(message_id: "123456" sub: SubMessage(subfield: "foo"))`
#
# In general, not only fields but also field paths can be referenced
# from a path pattern. Fields mapped to the path pattern cannot be
# repeated and must have a primitive (non-message) type.
#
# Any fields in the request message which are not bound by the path
# pattern automatically become (optional) HTTP query
# parameters. Assume the following definition of the request message:
#
#
# service Messaging {
# rpc GetMessage(GetMessageRequest) returns (Message) {
# option (google.api.http).get = "/v1/messages/{message_id}";
# }
# }
# message GetMessageRequest {
# message SubMessage {
# string subfield = 1;
# }
# string message_id = 1; // mapped to the URL
# int64 revision = 2; // becomes a parameter
# SubMessage sub = 3; // `sub.subfield` becomes a parameter
# }
#
#
# This enables a HTTP JSON to RPC mapping as below:
#
# HTTP | RPC
# -----|-----
# `GET /v1/messages/123456?revision=2&sub.subfield=foo` | `GetMessage(message_id: "123456" revision: 2 sub: SubMessage(subfield: "foo"))`
#
# Note that fields which are mapped to HTTP parameters must have a
# primitive type or a repeated primitive type. Message types are not
# allowed. In the case of a repeated type, the parameter can be
# repeated in the URL, as in `...?param=A¶m=B`.
#
# For HTTP method kinds which allow a request body, the `body` field
# specifies the mapping. Consider a REST update method on the
# message resource collection:
#
#
# service Messaging {
# rpc UpdateMessage(UpdateMessageRequest) returns (Message) {
# option (google.api.http) = {
# put: "/v1/messages/{message_id}"
# body: "message"
# };
# }
# }
# message UpdateMessageRequest {
# string message_id = 1; // mapped to the URL
# Message message = 2; // mapped to the body
# }
#
#
# The following HTTP JSON to RPC mapping is enabled, where the
# representation of the JSON in the request body is determined by
# protos JSON encoding:
#
# HTTP | RPC
# -----|-----
# `PUT /v1/messages/123456 { "text": "Hi!" }` | `UpdateMessage(message_id: "123456" message { text: "Hi!" })`
#
# The special name `*` can be used in the body mapping to define that
# every field not bound by the path template should be mapped to the
# request body. This enables the following alternative definition of
# the update method:
#
# service Messaging {
# rpc UpdateMessage(Message) returns (Message) {
# option (google.api.http) = {
# put: "/v1/messages/{message_id}"
# body: "*"
# };
# }
# }
# message Message {
# string message_id = 1;
# string text = 2;
# }
#
#
# The following HTTP JSON to RPC mapping is enabled:
#
# HTTP | RPC
# -----|-----
# `PUT /v1/messages/123456 { "text": "Hi!" }` | `UpdateMessage(message_id: "123456" text: "Hi!")`
#
# Note that when using `*` in the body mapping, it is not possible to
# have HTTP parameters, as all fields not bound by the path end in
# the body. This makes this option more rarely used in practice of
# defining REST APIs. The common usage of `*` is in custom methods
# which don't use the URL at all for transferring data.
#
# It is possible to define multiple HTTP methods for one RPC by using
# the `additional_bindings` option. Example:
#
# service Messaging {
# rpc GetMessage(GetMessageRequest) returns (Message) {
# option (google.api.http) = {
# get: "/v1/messages/{message_id}"
# additional_bindings {
# get: "/v1/users/{user_id}/messages/{message_id}"
# }
# };
# }
# }
# message GetMessageRequest {
# string message_id = 1;
# string user_id = 2;
# }
#
#
# This enables the following two alternative HTTP JSON to RPC
# mappings:
#
# HTTP | RPC
# -----|-----
# `GET /v1/messages/123456` | `GetMessage(message_id: "123456")`
# `GET /v1/users/me/messages/123456` | `GetMessage(user_id: "me" message_id: "123456")`
#
# # Rules for HTTP mapping
#
# The rules for mapping HTTP path, query parameters, and body fields
# to the request message are as follows:
#
# 1. The `body` field specifies either `*` or a field path, or is
# omitted. If omitted, it assumes there is no HTTP body.
# 2. Leaf fields (recursive expansion of nested messages in the
# request) can be classified into three types:
# (a) Matched in the URL template.
# (b) Covered by body (if body is `*`, everything except (a) fields;
# else everything under the body field)
# (c) All other fields.
# 3. URL query parameters found in the HTTP request are mapped to (c) fields.
# 4. Any body sent with an HTTP request can contain only (b) fields.
#
# The syntax of the path template is as follows:
#
# Template = "/" Segments [ Verb ] ;
# Segments = Segment { "/" Segment } ;
# Segment = "*" | "**" | LITERAL | Variable ;
# Variable = "{" FieldPath [ "=" Segments ] "}" ;
# FieldPath = IDENT { "." IDENT } ;
# Verb = ":" LITERAL ;
#
# The syntax `*` matches a single path segment. It follows the semantics of
# [RFC 6570](https://tools.ietf.org/html/rfc6570) Section 3.2.2 Simple String
# Expansion.
#
# The syntax `**` matches zero or more path segments. It follows the semantics
# of [RFC 6570](https://tools.ietf.org/html/rfc6570) Section 3.2.3 Reserved
# Expansion. NOTE: it must be the last segment in the path except the Verb.
#
# The syntax `LITERAL` matches literal text in the URL path.
#
# The syntax `Variable` matches the entire path as specified by its template;
# this nested template must not contain further variables. If a variable
# matches a single path segment, its template may be omitted, e.g. `{var}`
# is equivalent to `{var=*}`.
#
# NOTE: the field paths in variables and in the `body` must not refer to
# repeated fields or map fields.
#
# Use CustomHttpPattern to specify any HTTP method that is not included in the
# `pattern` field, such as HEAD, or "*" to leave the HTTP method unspecified for
# a given URL path rule. The wild-card rule is useful for services that provide
# content to Web (HTML) clients.
"body": "A String", # The name of the request field whose value is mapped to the HTTP body, or
# `*` for mapping all fields not captured by the path pattern to the HTTP
# body. NOTE: the referred field must not be a repeated field and must be
# present at the top-level of request message type.
"get": "A String", # Used for listing and getting information about resources.
"restCollection": "A String", # Optional. The REST collection name is by default derived from the URL
# pattern. If specified, this field overrides the default collection name.
# Example:
#
# rpc AddressesAggregatedList(AddressesAggregatedListRequest)
# returns (AddressesAggregatedListResponse) {
# option (google.api.http) = {
# get: "/v1/projects/{project_id}/aggregated/addresses"
# rest_collection: "projects.addresses"
# };
# }
#
# This method has the automatically derived collection name
# "projects.aggregated". Because, semantically, this rpc is actually an
# operation on the "projects.addresses" collection, the `rest_collection`
# field is configured to override the derived collection name.
"additionalBindings": [ # Additional HTTP bindings for the selector. Nested bindings must
# not contain an `additional_bindings` field themselves (that is,
# the nesting may only be one level deep).
# Object with schema name: HttpRule
],
"mediaUpload": { # Defines the Media configuration for a service in case of an upload. # Use this only for Scotty Requests. Do not use this for media support using
# Bytestream, add instead
# [][google.bytestream.RestByteStream] as an API to your
# configuration for Bytestream methods.
# Use this only for Scotty Requests. Do not use this for media support using
# Bytestream, add instead [][google.bytestream.RestByteStream] as an API to
# your configuration for Bytestream methods.
"startNotification": True or False, # Whether to receive a notification on the start of media upload.
"progressNotification": True or False, # Whether to receive a notification for progress changes of media upload.
"mimeTypes": [ # An array of mimetype patterns. Esf will only accept uploads that match one
# of the given patterns.
"A String",
],
"enabled": True or False, # Whether upload is enabled.
"completeNotification": True or False, # A boolean that determines whether a notification for the completion of an
# upload should be sent to the backend. These notifications will not be seen
# by the client and will not consume quota.
"dropzone": "A String", # Name of the Scotty dropzone to use for the current API.
"maxSize": "A String", # Optional maximum acceptable size for an upload.
# The size is specified in bytes.
"uploadService": "A String", # DO NOT USE FIELDS BELOW THIS LINE UNTIL THIS WARNING IS REMOVED.
#
# Specify name of the upload service if one is used for upload.
},
"selector": "A String", # Selects methods to which this rule applies.
#
# Refer to selector for syntax details.
"responseBody": "A String", # The name of the response field whose value is mapped to the HTTP body of
# response. Other response fields are ignored. This field is optional. When
# not set, the response message will be used as HTTP body of response.
# NOTE: the referred field must be not a repeated field and must be present
# at the top-level of response message type.
"restMethodName": "A String", # Optional. The rest method name is by default derived from the URL
# pattern. If specified, this field overrides the default method name.
# Example:
#
# rpc CreateResource(CreateResourceRequest)
# returns (CreateResourceResponse) {
# option (google.api.http) = {
# post: "/v1/resources",
# body: "resource",
# rest_method_name: "insert"
# };
# }
#
# This method has the automatically derived rest method name "create", but
# for backwards compatability with apiary, it is specified as insert.
"mediaDownload": { # Defines the Media configuration for a service in case of a download. # Use this only for Scotty Requests. Do not use this for bytestream methods.
# For media support, add instead [][google.bytestream.RestByteStream] as an
# API to your configuration.
# Use this only for Scotty Requests. Do not use this for media support using
# Bytestream, add instead [][google.bytestream.RestByteStream] as an API to
# your configuration for Bytestream methods.
"useDirectDownload": True or False, # A boolean that determines if direct download from ESF should be used for
# download of this media.
"completeNotification": True or False, # A boolean that determines whether a notification for the completion of a
# download should be sent to the backend.
"enabled": True or False, # Whether download is enabled.
"maxDirectDownloadSize": "A String", # Optional maximum acceptable size for direct download.
# The size is specified in bytes.
"dropzone": "A String", # Name of the Scotty dropzone to use for the current API.
"downloadService": "A String", # DO NOT USE FIELDS BELOW THIS LINE UNTIL THIS WARNING IS REMOVED.
#
# Specify name of the download service if one is used for download.
},
"put": "A String", # Used for updating a resource.
"patch": "A String", # Used for updating a resource.
"post": "A String", # Used for creating a resource.
"custom": { # A custom pattern is used for defining custom HTTP verb. # Custom pattern is used for defining custom verbs.
"path": "A String", # The path matched by this custom verb.
"kind": "A String", # The name of this custom HTTP verb.
},
"delete": "A String", # Used for deleting a resource.
},
],
"fullyDecodeReservedExpansion": True or False, # When set to true, URL path parmeters will be fully URI-decoded except in
# cases of single segment matches in reserved expansion, where "%2F" will be
# left encoded.
#
# The default behavior is to not decode RFC 6570 reserved characters in multi
# segment matches.
},
"apis": [ # A list of API interfaces exported by this service. Only the `name` field
# of the google.protobuf.Api needs to be provided by the configuration
# author, as the remaining fields will be derived from the IDL during the
# normalization process. It is an error to specify an API interface here
# which cannot be resolved against the associated IDL files.
{ # Api is a light-weight descriptor for a protocol buffer service.
"name": "A String", # The fully qualified name of this api, including package name
# followed by the api's simple name.
"sourceContext": { # `SourceContext` represents information about the source of a # Source context for the protocol buffer service represented by this
# message.
# protobuf element, like the file in which it is defined.
"fileName": "A String", # The path-qualified name of the .proto file that contained the associated
# protobuf element. For example: `"google/protobuf/source_context.proto"`.
},
"mixins": [ # Included APIs. See Mixin.
{ # Declares an API to be included in this API. The including API must
# redeclare all the methods from the included API, but documentation
# and options are inherited as follows:
#
# - If after comment and whitespace stripping, the documentation
# string of the redeclared method is empty, it will be inherited
# from the original method.
#
# - Each annotation belonging to the service config (http,
# visibility) which is not set in the redeclared method will be
# inherited.
#
# - If an http annotation is inherited, the path pattern will be
# modified as follows. Any version prefix will be replaced by the
# version of the including API plus the root path if specified.
#
# Example of a simple mixin:
#
# package google.acl.v1;
# service AccessControl {
# // Get the underlying ACL object.
# rpc GetAcl(GetAclRequest) returns (Acl) {
# option (google.api.http).get = "/v1/{resource=**}:getAcl";
# }
# }
#
# package google.storage.v2;
# service Storage {
# // rpc GetAcl(GetAclRequest) returns (Acl);
#
# // Get a data record.
# rpc GetData(GetDataRequest) returns (Data) {
# option (google.api.http).get = "/v2/{resource=**}";
# }
# }
#
# Example of a mixin configuration:
#
# apis:
# - name: google.storage.v2.Storage
# mixins:
# - name: google.acl.v1.AccessControl
#
# The mixin construct implies that all methods in `AccessControl` are
# also declared with same name and request/response types in
# `Storage`. A documentation generator or annotation processor will
# see the effective `Storage.GetAcl` method after inherting
# documentation and annotations as follows:
#
# service Storage {
# // Get the underlying ACL object.
# rpc GetAcl(GetAclRequest) returns (Acl) {
# option (google.api.http).get = "/v2/{resource=**}:getAcl";
# }
# ...
# }
#
# Note how the version in the path pattern changed from `v1` to `v2`.
#
# If the `root` field in the mixin is specified, it should be a
# relative path under which inherited HTTP paths are placed. Example:
#
# apis:
# - name: google.storage.v2.Storage
# mixins:
# - name: google.acl.v1.AccessControl
# root: acls
#
# This implies the following inherited HTTP annotation:
#
# service Storage {
# // Get the underlying ACL object.
# rpc GetAcl(GetAclRequest) returns (Acl) {
# option (google.api.http).get = "/v2/acls/{resource=**}:getAcl";
# }
# ...
# }
"root": "A String", # If non-empty specifies a path under which inherited HTTP paths
# are rooted.
"name": "A String", # The fully qualified name of the API which is included.
},
],
"syntax": "A String", # The source syntax of the service.
"version": "A String", # A version string for this api. If specified, must have the form
# `major-version.minor-version`, as in `1.10`. If the minor version
# is omitted, it defaults to zero. If the entire version field is
# empty, the major version is derived from the package name, as
# outlined below. If the field is not empty, the version in the
# package name will be verified to be consistent with what is
# provided here.
#
# The versioning schema uses [semantic
# versioning](http://semver.org) where the major version number
# indicates a breaking change and the minor version an additive,
# non-breaking change. Both version numbers are signals to users
# what to expect from different versions, and should be carefully
# chosen based on the product plan.
#
# The major version is also reflected in the package name of the
# API, which must end in `v`, as in
# `google.feature.v1`. For major versions 0 and 1, the suffix can
# be omitted. Zero major versions must only be used for
# experimental, none-GA apis.
"options": [ # Any metadata attached to the API.
{ # A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
"name": "A String", # The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, `"map_entry"`.
# For custom options, it should be the fully-qualified name. For example,
# `"google.api.http"`.
"value": { # The option's value packed in an Any message. If the value is a primitive,
# the corresponding wrapper type defined in google/protobuf/wrappers.proto
# should be used. If the value is an enum, it should be stored as an int32
# value using the google.protobuf.Int32Value type.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
},
],
"methods": [ # The methods of this api, in unspecified order.
{ # Method represents a method of an api.
"name": "A String", # The simple name of this method.
"requestStreaming": True or False, # If true, the request is streamed.
"responseTypeUrl": "A String", # The URL of the output message type.
"requestTypeUrl": "A String", # A URL of the input message type.
"responseStreaming": True or False, # If true, the response is streamed.
"syntax": "A String", # The source syntax of this method.
"options": [ # Any metadata attached to the method.
{ # A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
"name": "A String", # The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, `"map_entry"`.
# For custom options, it should be the fully-qualified name. For example,
# `"google.api.http"`.
"value": { # The option's value packed in an Any message. If the value is a primitive,
# the corresponding wrapper type defined in google/protobuf/wrappers.proto
# should be used. If the value is an enum, it should be stored as an int32
# value using the google.protobuf.Int32Value type.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
},
],
},
],
},
],
"customError": { # Customize service error responses. For example, list any service # Custom error configuration.
# specific protobuf types that can appear in error detail lists of
# error responses.
#
# Example:
#
# custom_error:
# types:
# - google.foo.v1.CustomError
# - google.foo.v1.AnotherError
"rules": [ # The list of custom error rules that apply to individual API messages.
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # A custom error rule.
"isErrorType": True or False, # Mark this message as possible payload in error response. Otherwise,
# objects of this type will be filtered when they appear in error payload.
"selector": "A String", # Selects messages to which this rule applies.
#
# Refer to selector for syntax details.
},
],
"types": [ # The list of custom error detail types, e.g. 'google.foo.v1.CustomError'.
"A String",
],
},
"quota": { # Quota configuration helps to achieve fairness and budgeting in service # Quota configuration.
# usage.
#
# The quota configuration works this way:
# - The service configuration defines a set of metrics.
# - For API calls, the quota.metric_rules maps methods to metrics with
# corresponding costs.
# - The quota.limits defines limits on the metrics, which will be used for
# quota checks at runtime.
#
# An example quota configuration in yaml format:
#
# quota:
#
# - name: apiWriteQpsPerProject
# metric: library.googleapis.com/write_calls
# unit: "1/min/{project}" # rate limit for consumer projects
# values:
# STANDARD: 10000
#
#
# # The metric rules bind all methods to the read_calls metric,
# # except for the UpdateBook and DeleteBook methods. These two methods
# # are mapped to the write_calls metric, with the UpdateBook method
# # consuming at twice rate as the DeleteBook method.
# metric_rules:
# - selector: "*"
# metric_costs:
# library.googleapis.com/read_calls: 1
# - selector: google.example.library.v1.LibraryService.UpdateBook
# metric_costs:
# library.googleapis.com/write_calls: 2
# - selector: google.example.library.v1.LibraryService.DeleteBook
# metric_costs:
# library.googleapis.com/write_calls: 1
#
# Corresponding Metric definition:
#
# metrics:
# - name: library.googleapis.com/read_calls
# display_name: Read requests
# metric_kind: DELTA
# value_type: INT64
#
# - name: library.googleapis.com/write_calls
# display_name: Write requests
# metric_kind: DELTA
# value_type: INT64
"metricRules": [ # List of `MetricRule` definitions, each one mapping a selected method to one
# or more metrics.
{ # Bind API methods to metrics. Binding a method to a metric causes that
# metric's configured quota behaviors to apply to the method call.
"metricCosts": { # Metrics to update when the selected methods are called, and the associated
# cost applied to each metric.
#
# The key of the map is the metric name, and the values are the amount
# increased for the metric against which the quota limits are defined.
# The value must not be negative.
"a_key": "A String",
},
"selector": "A String", # Selects the methods to which this rule applies.
#
# Refer to selector for syntax details.
},
],
"limits": [ # List of `QuotaLimit` definitions for the service.
{ # `QuotaLimit` defines a specific limit that applies over a specified duration
# for a limit type. There can be at most one limit for a duration and limit
# type combination defined within a `QuotaGroup`.
"displayName": "A String", # User-visible display name for this limit.
# Optional. If not set, the UI will provide a default display name based on
# the quota configuration. This field can be used to override the default
# display name generated from the configuration.
"description": "A String", # Optional. User-visible, extended description for this quota limit.
# Should be used only when more context is needed to understand this limit
# than provided by the limit's display name (see: `display_name`).
"defaultLimit": "A String", # Default number of tokens that can be consumed during the specified
# duration. This is the number of tokens assigned when a client
# application developer activates the service for his/her project.
#
# Specifying a value of 0 will block all requests. This can be used if you
# are provisioning quota to selected consumers and blocking others.
# Similarly, a value of -1 will indicate an unlimited quota. No other
# negative values are allowed.
#
# Used by group-based quotas only.
"metric": "A String", # The name of the metric this quota limit applies to. The quota limits with
# the same metric will be checked together during runtime. The metric must be
# defined within the service config.
#
# Used by metric-based quotas only.
"values": { # Tiered limit values, currently only STANDARD is supported.
"a_key": "A String",
},
"maxLimit": "A String", # Maximum number of tokens that can be consumed during the specified
# duration. Client application developers can override the default limit up
# to this maximum. If specified, this value cannot be set to a value less
# than the default limit. If not specified, it is set to the default limit.
#
# To allow clients to apply overrides with no upper bound, set this to -1,
# indicating unlimited maximum quota.
#
# Used by group-based quotas only.
"duration": "A String", # Duration of this limit in textual notation. Example: "100s", "24h", "1d".
# For duration longer than a day, only multiple of days is supported. We
# support only "100s" and "1d" for now. Additional support will be added in
# the future. "0" indicates indefinite duration.
#
# Used by group-based quotas only.
"freeTier": "A String", # Free tier value displayed in the Developers Console for this limit.
# The free tier is the number of tokens that will be subtracted from the
# billed amount when billing is enabled.
# This field can only be set on a limit with duration "1d", in a billable
# group; it is invalid on any other limit. If this field is not set, it
# defaults to 0, indicating that there is no free tier for this service.
#
# Used by group-based quotas only.
"unit": "A String", # Specify the unit of the quota limit. It uses the same syntax as
# Metric.unit. The supported unit kinds are determined by the quota
# backend system.
#
# The [Google Service Control](https://cloud.google.com/service-control)
# supports the following unit components:
# * One of the time intevals:
# * "/min" for quota every minute.
# * "/d" for quota every 24 hours, starting 00:00 US Pacific Time.
# * Otherwise the quota won't be reset by time, such as storage limit.
# * One and only one of the granted containers:
# * "/{project}" quota for a project
#
# Here are some examples:
# * "1/min/{project}" for quota per minute per project.
#
# Note: the order of unit components is insignificant.
# The "1" at the beginning is required to follow the metric unit syntax.
#
# Used by metric-based quotas only.
"name": "A String", # Name of the quota limit. The name is used to refer to the limit when
# overriding the default limit on per-consumer basis.
#
# For metric-based quota limits, the name must be provided, and it must be
# unique within the service. The name can only include alphanumeric
# characters as well as '-'.
#
# The maximum length of the limit name is 64 characters.
#
# The name of a limit is used as a unique identifier for this limit.
# Therefore, once a limit has been put into use, its name should be
# immutable. You can use the display_name field to provide a user-friendly
# name for the limit. The display name can be evolved over time without
# affecting the identity of the limit.
},
],
},
"visibility": { # `Visibility` defines restrictions for the visibility of service # API visibility configuration.
# elements. Restrictions are specified using visibility labels
# (e.g., TRUSTED_TESTER) that are elsewhere linked to users and projects.
#
# Users and projects can have access to more than one visibility label. The
# effective visibility for multiple labels is the union of each label's
# elements, plus any unrestricted elements.
#
# If an element and its parents have no restrictions, visibility is
# unconditionally granted.
#
# Example:
#
# visibility:
# rules:
# - selector: google.calendar.Calendar.EnhancedSearch
# restriction: TRUSTED_TESTER
# - selector: google.calendar.Calendar.Delegate
# restriction: GOOGLE_INTERNAL
#
# Here, all methods are publicly visible except for the restricted methods
# EnhancedSearch and Delegate.
"rules": [ # A list of visibility rules that apply to individual API elements.
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # A visibility rule provides visibility configuration for an individual API
# element.
"restriction": "A String", # A comma-separated list of visibility labels that apply to the `selector`.
# Any of the listed labels can be used to grant the visibility.
#
# If a rule has multiple labels, removing one of the labels but not all of
# them can break clients.
#
# Example:
#
# visibility:
# rules:
# - selector: google.calendar.Calendar.EnhancedSearch
# restriction: GOOGLE_INTERNAL, TRUSTED_TESTER
#
# Removing GOOGLE_INTERNAL from this restriction will break clients that
# rely on this method and only had access to it through GOOGLE_INTERNAL.
"selector": "A String", # Selects methods, messages, fields, enums, etc. to which this rule applies.
#
# Refer to selector for syntax details.
},
],
},
"metrics": [ # Defines the metrics used by this service.
{ # Defines a metric type and its schema. Once a metric descriptor is created,
# deleting or altering it stops data collection and makes the metric type's
# existing data unusable.
"displayName": "A String", # A concise name for the metric, which can be displayed in user interfaces.
# Use sentence case without an ending period, for example "Request count".
"name": "A String", # The resource name of the metric descriptor. Depending on the
# implementation, the name typically includes: (1) the parent resource name
# that defines the scope of the metric type or of its data; and (2) the
# metric's URL-encoded type, which also appears in the `type` field of this
# descriptor. For example, following is the resource name of a custom
# metric within the GCP project `my-project-id`:
#
# "projects/my-project-id/metricDescriptors/custom.googleapis.com%2Finvoice%2Fpaid%2Famount"
"metricKind": "A String", # Whether the metric records instantaneous values, changes to a value, etc.
# Some combinations of `metric_kind` and `value_type` might not be supported.
"valueType": "A String", # Whether the measurement is an integer, a floating-point number, etc.
# Some combinations of `metric_kind` and `value_type` might not be supported.
"labels": [ # The set of labels that can be used to describe a specific
# instance of this metric type. For example, the
# `appengine.googleapis.com/http/server/response_latencies` metric
# type has a label for the HTTP response code, `response_code`, so
# you can look at latencies for successful responses or just
# for responses that failed.
{ # A description of a label.
"valueType": "A String", # The type of data that can be assigned to the label.
"description": "A String", # A human-readable description for the label.
"key": "A String", # The label key.
},
],
"type": "A String", # The metric type, including its DNS name prefix. The type is not
# URL-encoded. All user-defined custom metric types have the DNS name
# `custom.googleapis.com`. Metric types should use a natural hierarchical
# grouping. For example:
#
# "custom.googleapis.com/invoice/paid/amount"
# "appengine.googleapis.com/http/server/response_latencies"
"unit": "A String", # The unit in which the metric value is reported. It is only applicable
# if the `value_type` is `INT64`, `DOUBLE`, or `DISTRIBUTION`. The
# supported units are a subset of [The Unified Code for Units of
# Measure](http://unitsofmeasure.org/ucum.html) standard:
#
# **Basic units (UNIT)**
#
# * `bit` bit
# * `By` byte
# * `s` second
# * `min` minute
# * `h` hour
# * `d` day
#
# **Prefixes (PREFIX)**
#
# * `k` kilo (10**3)
# * `M` mega (10**6)
# * `G` giga (10**9)
# * `T` tera (10**12)
# * `P` peta (10**15)
# * `E` exa (10**18)
# * `Z` zetta (10**21)
# * `Y` yotta (10**24)
# * `m` milli (10**-3)
# * `u` micro (10**-6)
# * `n` nano (10**-9)
# * `p` pico (10**-12)
# * `f` femto (10**-15)
# * `a` atto (10**-18)
# * `z` zepto (10**-21)
# * `y` yocto (10**-24)
# * `Ki` kibi (2**10)
# * `Mi` mebi (2**20)
# * `Gi` gibi (2**30)
# * `Ti` tebi (2**40)
#
# **Grammar**
#
# The grammar includes the dimensionless unit `1`, such as `1/s`.
#
# The grammar also includes these connectors:
#
# * `/` division (as an infix operator, e.g. `1/s`).
# * `.` multiplication (as an infix operator, e.g. `GBy.d`)
#
# The grammar for a unit is as follows:
#
# Expression = Component { "." Component } { "/" Component } ;
#
# Component = [ PREFIX ] UNIT [ Annotation ]
# | Annotation
# | "1"
# ;
#
# Annotation = "{" NAME "}" ;
#
# Notes:
#
# * `Annotation` is just a comment if it follows a `UNIT` and is
# equivalent to `1` if it is used alone. For examples,
# `{requests}/s == 1/s`, `By{transmitted}/s == By/s`.
# * `NAME` is a sequence of non-blank printable ASCII characters not
# containing '{' or '}'.
"description": "A String", # A detailed description of the metric, which can be used in documentation.
},
],
"enums": [ # A list of all enum types included in this API service. Enums
# referenced directly or indirectly by the `apis` are automatically
# included. Enums which are not referenced but shall be included
# should be listed here by name. Example:
#
# enums:
# - name: google.someapi.v1.SomeEnum
{ # Enum type definition.
"syntax": "A String", # The source syntax.
"sourceContext": { # `SourceContext` represents information about the source of a # The source context.
# protobuf element, like the file in which it is defined.
"fileName": "A String", # The path-qualified name of the .proto file that contained the associated
# protobuf element. For example: `"google/protobuf/source_context.proto"`.
},
"options": [ # Protocol buffer options.
{ # A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
"name": "A String", # The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, `"map_entry"`.
# For custom options, it should be the fully-qualified name. For example,
# `"google.api.http"`.
"value": { # The option's value packed in an Any message. If the value is a primitive,
# the corresponding wrapper type defined in google/protobuf/wrappers.proto
# should be used. If the value is an enum, it should be stored as an int32
# value using the google.protobuf.Int32Value type.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
},
],
"name": "A String", # Enum type name.
"enumvalue": [ # Enum value definitions.
{ # Enum value definition.
"number": 42, # Enum value number.
"name": "A String", # Enum value name.
"options": [ # Protocol buffer options.
{ # A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
"name": "A String", # The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, `"map_entry"`.
# For custom options, it should be the fully-qualified name. For example,
# `"google.api.http"`.
"value": { # The option's value packed in an Any message. If the value is a primitive,
# the corresponding wrapper type defined in google/protobuf/wrappers.proto
# should be used. If the value is an enum, it should be stored as an int32
# value using the google.protobuf.Int32Value type.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
},
],
},
],
},
],
"types": [ # A list of all proto message types included in this API service.
# Types referenced directly or indirectly by the `apis` are
# automatically included. Messages which are not referenced but
# shall be included, such as types used by the `google.protobuf.Any` type,
# should be listed here by name. Example:
#
# types:
# - name: google.protobuf.Int32
{ # A protocol buffer message type.
"oneofs": [ # The list of types appearing in `oneof` definitions in this type.
"A String",
],
"name": "A String", # The fully qualified message name.
"fields": [ # The list of fields.
{ # A single field of a message type.
"kind": "A String", # The field type.
"oneofIndex": 42, # The index of the field type in `Type.oneofs`, for message or enumeration
# types. The first type has index 1; zero means the type is not in the list.
"typeUrl": "A String", # The field type URL, without the scheme, for message or enumeration
# types. Example: `"type.googleapis.com/google.protobuf.Timestamp"`.
"name": "A String", # The field name.
"defaultValue": "A String", # The string value of the default value of this field. Proto2 syntax only.
"jsonName": "A String", # The field JSON name.
"number": 42, # The field number.
"cardinality": "A String", # The field cardinality.
"options": [ # The protocol buffer options.
{ # A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
"name": "A String", # The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, `"map_entry"`.
# For custom options, it should be the fully-qualified name. For example,
# `"google.api.http"`.
"value": { # The option's value packed in an Any message. If the value is a primitive,
# the corresponding wrapper type defined in google/protobuf/wrappers.proto
# should be used. If the value is an enum, it should be stored as an int32
# value using the google.protobuf.Int32Value type.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
},
],
"packed": True or False, # Whether to use alternative packed wire representation.
},
],
"syntax": "A String", # The source syntax.
"sourceContext": { # `SourceContext` represents information about the source of a # The source context.
# protobuf element, like the file in which it is defined.
"fileName": "A String", # The path-qualified name of the .proto file that contained the associated
# protobuf element. For example: `"google/protobuf/source_context.proto"`.
},
"options": [ # The protocol buffer options.
{ # A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
"name": "A String", # The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, `"map_entry"`.
# For custom options, it should be the fully-qualified name. For example,
# `"google.api.http"`.
"value": { # The option's value packed in an Any message. If the value is a primitive,
# the corresponding wrapper type defined in google/protobuf/wrappers.proto
# should be used. If the value is an enum, it should be stored as an int32
# value using the google.protobuf.Int32Value type.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
},
],
},
],
"logging": { # Logging configuration of the service. # Logging configuration.
#
# The following example shows how to configure logs to be sent to the
# producer and consumer projects. In the example, the `activity_history`
# log is sent to both the producer and consumer projects, whereas the
# `purchase_history` log is only sent to the producer project.
#
# monitored_resources:
# - type: library.googleapis.com/branch
# labels:
# - key: /city
# description: The city where the library branch is located in.
# - key: /name
# description: The name of the branch.
# logs:
# - name: activity_history
# labels:
# - key: /customer_id
# - name: purchase_history
# logging:
# producer_destinations:
# - monitored_resource: library.googleapis.com/branch
# logs:
# - activity_history
# - purchase_history
# consumer_destinations:
# - monitored_resource: library.googleapis.com/branch
# logs:
# - activity_history
"producerDestinations": [ # Logging configurations for sending logs to the producer project.
# There can be multiple producer destinations, each one must have a
# different monitored resource type. A log can be used in at most
# one producer destination.
{ # Configuration of a specific logging destination (the producer project
# or the consumer project).
"monitoredResource": "A String", # The monitored resource type. The type must be defined in the
# Service.monitored_resources section.
"logs": [ # Names of the logs to be sent to this destination. Each name must
# be defined in the Service.logs section. If the log name is
# not a domain scoped name, it will be automatically prefixed with
# the service name followed by "/".
"A String",
],
},
],
"consumerDestinations": [ # Logging configurations for sending logs to the consumer project.
# There can be multiple consumer destinations, each one must have a
# different monitored resource type. A log can be used in at most
# one consumer destination.
{ # Configuration of a specific logging destination (the producer project
# or the consumer project).
"monitoredResource": "A String", # The monitored resource type. The type must be defined in the
# Service.monitored_resources section.
"logs": [ # Names of the logs to be sent to this destination. Each name must
# be defined in the Service.logs section. If the log name is
# not a domain scoped name, it will be automatically prefixed with
# the service name followed by "/".
"A String",
],
},
],
},
"name": "A String", # The DNS address at which this service is available,
# e.g. `calendar.googleapis.com`.
"documentation": { # `Documentation` provides the information for describing a service. # Additional API documentation.
#
# Example:
# documentation:
# summary: >
# The Google Calendar API gives access
# to most calendar features.
# pages:
# - name: Overview
# content: (== include google/foo/overview.md ==)
# - name: Tutorial
# content: (== include google/foo/tutorial.md ==)
# subpages;
# - name: Java
# content: (== include google/foo/tutorial_java.md ==)
# rules:
# - selector: google.calendar.Calendar.Get
# description: >
# ...
# - selector: google.calendar.Calendar.Put
# description: >
# ...
#
# Documentation is provided in markdown syntax. In addition to
# standard markdown features, definition lists, tables and fenced
# code blocks are supported. Section headers can be provided and are
# interpreted relative to the section nesting of the context where
# a documentation fragment is embedded.
#
# Documentation from the IDL is merged with documentation defined
# via the config at normalization time, where documentation provided
# by config rules overrides IDL provided.
#
# A number of constructs specific to the API platform are supported
# in documentation text.
#
# In order to reference a proto element, the following
# notation can be used:
# [fully.qualified.proto.name][]
# To override the display text used for the link, this can be used:
# [display text][fully.qualified.proto.name]
# Text can be excluded from doc using the following notation:
# (-- internal comment --)
# Comments can be made conditional using a visibility label. The below
# text will be only rendered if the `BETA` label is available:
# (--BETA: comment for BETA users --)
# A few directives are available in documentation. Note that
# directives must appear on a single line to be properly
# identified. The `include` directive includes a markdown file from
# an external source:
# (== include path/to/file ==)
# The `resource_for` directive marks a message to be the resource of
# a collection in REST view. If it is not specified, tools attempt
# to infer the resource from the operations in a collection:
# (== resource_for v1.shelves.books ==)
# The directive `suppress_warning` does not directly affect documentation
# and is documented together with service config validation.
"rules": [ # A list of documentation rules that apply to individual API elements.
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # A documentation rule provides information about individual API elements.
"description": "A String", # Description of the selected API(s).
"deprecationDescription": "A String", # Deprecation description of the selected element(s). It can be provided if an
# element is marked as `deprecated`.
"selector": "A String", # The selector is a comma-separated list of patterns. Each pattern is a
# qualified name of the element which may end in "*", indicating a wildcard.
# Wildcards are only allowed at the end and for a whole component of the
# qualified name, i.e. "foo.*" is ok, but not "foo.b*" or "foo.*.bar". To
# specify a default for all applicable elements, the whole pattern "*"
# is used.
},
],
"documentationRootUrl": "A String", # The URL to the root of documentation.
"overview": "A String", # Declares a single overview page. For example:
# documentation:
# summary: ...
# overview: (== include overview.md ==)
#
# This is a shortcut for the following declaration (using pages style):
# documentation:
# summary: ...
# pages:
# - name: Overview
# content: (== include overview.md ==)
#
# Note: you cannot specify both `overview` field and `pages` field.
"pages": [ # The top level pages for the documentation set.
{ # Represents a documentation page. A page can contain subpages to represent
# nested documentation set structure.
"content": "A String", # The Markdown content of the page. You can use (== include {path} ==)
# to include content from a Markdown file.
"subpages": [ # Subpages of this page. The order of subpages specified here will be
# honored in the generated docset.
# Object with schema name: Page
],
"name": "A String", # The name of the page. It will be used as an identity of the page to
# generate URI of the page, text of the link to this page in navigation,
# etc. The full page name (start from the root page name to this page
# concatenated with `.`) can be used as reference to the page in your
# documentation. For example:
# pages:
# - name: Tutorial
# content: (== include tutorial.md ==)
# subpages:
# - name: Java
# content: (== include tutorial_java.md ==)
#
# You can reference `Java` page using Markdown reference link syntax:
# `Java`.
},
],
"summary": "A String", # A short summary of what the service does. Can only be provided by
# plain text.
},
"sourceInfo": { # Source information used to create a Service Config # Output only. The source information for this configuration if available.
"sourceFiles": [ # All files used during config generation.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
},
"systemTypes": [ # A list of all proto message types included in this API service.
# It serves similar purpose as [google.api.Service.types], except that
# these types are not needed by user-defined APIs. Therefore, they will not
# show up in the generated discovery doc. This field should only be used
# to define system APIs in ESF.
{ # A protocol buffer message type.
"oneofs": [ # The list of types appearing in `oneof` definitions in this type.
"A String",
],
"name": "A String", # The fully qualified message name.
"fields": [ # The list of fields.
{ # A single field of a message type.
"kind": "A String", # The field type.
"oneofIndex": 42, # The index of the field type in `Type.oneofs`, for message or enumeration
# types. The first type has index 1; zero means the type is not in the list.
"typeUrl": "A String", # The field type URL, without the scheme, for message or enumeration
# types. Example: `"type.googleapis.com/google.protobuf.Timestamp"`.
"name": "A String", # The field name.
"defaultValue": "A String", # The string value of the default value of this field. Proto2 syntax only.
"jsonName": "A String", # The field JSON name.
"number": 42, # The field number.
"cardinality": "A String", # The field cardinality.
"options": [ # The protocol buffer options.
{ # A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
"name": "A String", # The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, `"map_entry"`.
# For custom options, it should be the fully-qualified name. For example,
# `"google.api.http"`.
"value": { # The option's value packed in an Any message. If the value is a primitive,
# the corresponding wrapper type defined in google/protobuf/wrappers.proto
# should be used. If the value is an enum, it should be stored as an int32
# value using the google.protobuf.Int32Value type.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
},
],
"packed": True or False, # Whether to use alternative packed wire representation.
},
],
"syntax": "A String", # The source syntax.
"sourceContext": { # `SourceContext` represents information about the source of a # The source context.
# protobuf element, like the file in which it is defined.
"fileName": "A String", # The path-qualified name of the .proto file that contained the associated
# protobuf element. For example: `"google/protobuf/source_context.proto"`.
},
"options": [ # The protocol buffer options.
{ # A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
"name": "A String", # The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, `"map_entry"`.
# For custom options, it should be the fully-qualified name. For example,
# `"google.api.http"`.
"value": { # The option's value packed in an Any message. If the value is a primitive,
# the corresponding wrapper type defined in google/protobuf/wrappers.proto
# should be used. If the value is an enum, it should be stored as an int32
# value using the google.protobuf.Int32Value type.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
},
],
},
],
"context": { # `Context` defines which contexts an API requests. # Context configuration.
#
# Example:
#
# context:
# rules:
# - selector: "*"
# requested:
# - google.rpc.context.ProjectContext
# - google.rpc.context.OriginContext
#
# The above specifies that all methods in the API request
# `google.rpc.context.ProjectContext` and
# `google.rpc.context.OriginContext`.
#
# Available context types are defined in package
# `google.rpc.context`.
"rules": [ # A list of RPC context rules that apply to individual API methods.
#
# **NOTE:** All service configuration rules follow "last one wins" order.
{ # A context rule provides information about the context for an individual API
# element.
"provided": [ # A list of full type names of provided contexts.
"A String",
],
"requested": [ # A list of full type names of requested contexts.
"A String",
],
"selector": "A String", # Selects the methods to which this rule applies.
#
# Refer to selector for syntax details.
},
],
},
"endpoints": [ # Configuration for network endpoints. If this is empty, then an endpoint
# with the same name as the service is automatically generated to service all
# defined APIs.
{ # `Endpoint` describes a network endpoint that serves a set of APIs.
# A service may expose any number of endpoints, and all endpoints share the
# same service configuration, such as quota configuration and monitoring
# configuration.
#
# Example service configuration:
#
# name: library-example.googleapis.com
# endpoints:
# # Below entry makes 'google.example.library.v1.Library'
# # API be served from endpoint address library-example.googleapis.com.
# # It also allows HTTP OPTIONS calls to be passed to the backend, for
# # it to decide whether the subsequent cross-origin request is
# # allowed to proceed.
# - name: library-example.googleapis.com
# allow_cors: true
"features": [ # The list of features enabled on this endpoint.
"A String",
],
"apis": [ # The list of APIs served by this endpoint.
#
# If no APIs are specified this translates to "all APIs" exported by the
# service, as defined in the top-level service configuration.
"A String",
],
"allowCors": True or False, # Allowing
# [CORS](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing), aka
# cross-domain traffic, would allow the backends served from this endpoint to
# receive and respond to HTTP OPTIONS requests. The response will be used by
# the browser to determine whether the subsequent cross-origin request is
# allowed to proceed.
"name": "A String", # The canonical name of this endpoint.
"target": "A String", # The specification of an Internet routable address of API frontend that will
# handle requests to this [API Endpoint](https://cloud.google.com/apis/design/glossary).
# It should be either a valid IPv4 address or a fully-qualified domain name.
# For example, "8.8.8.8" or "myservice.appspot.com".
"aliases": [ # DEPRECATED: This field is no longer supported. Instead of using aliases,
# please specify multiple google.api.Endpoint for each of the intented
# alias.
#
# Additional names that this endpoint will be hosted on.
"A String",
],
},
],
"experimental": { # Experimental service configuration. These configuration options can # Experimental configuration.
# only be used by whitelisted users.
"authorization": { # Configuration of authorization. # Authorization configuration.
#
# This section determines the authorization provider, if unspecified, then no
# authorization check will be done.
#
# Example:
#
# experimental:
# authorization:
# provider: firebaserules.googleapis.com
"provider": "A String", # The name of the authorization provider, such as
# firebaserules.googleapis.com.
},
},
},
},
],
"nextPageToken": "A String", # Token that can be passed to `ListEnabledServices` to resume a paginated
# query.
}