1#Version check for XTRA 2#DISABLE = 0 3#AUTO = 1 4#XTRA2 = 2 5#XTRA3 = 3 6XTRA_VERSION_CHECK=1 7 8# Error Estimate 9# _SET = 1 10# _CLEAR = 0 11ERR_ESTIMATE=0 12 13# NTP Server 14# NTP_SERVER=time.gpsonextra.net 15# Asia 16# NTP_SERVER=asia.pool.ntp.org 17# Europe 18# NTP_SERVER=europe.pool.ntp.org 19# North America 20# NTP_SERVER=north-america.pool.ntp.org 21 22NTP_SERVER = time.google.com 23 24# If NTP_SERVER is commented NTP_SERVER=time.izatcloud.net is used 25 26# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 27# 4 - Debug, 5 - Verbose 28# If DEBUG_LEVEL is commented, Android's logging levels will be used 29DEBUG_LEVEL = 3 30 31# Intermediate position report, 1=enable, 0=disable 32INTERMEDIATE_POS=0 33 34# GPS Capabilities bit mask 35# SCHEDULING = 0x01 36# MSB = 0x02 37# MSA = 0x04 38# ON_DEMAND_TIME = 0x10 39# GEOFENCE = 0x20 40# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE 41CAPABILITIES=0x37 42 43# Accuracy threshold for intermediate positions 44# less accurate positions are ignored, 0 for passing all positions 45# ACCURACY_THRES=5000 46 47################################ 48##### AGPS server settings ##### 49################################ 50# Bitmask of slots that are available 51# for write/install to, where 1s indicate writable, 52# and the default value is 0 where no slots 53# are writable. For example, AGPS_CERT_WRITABLE_MASK 54# of b1000001010 makes 3 slots available 55# and the remaining 7 slots unwritable. 56# AGPS_CERT_WRITABLE_MASK=0 57 58################################ 59# EXTRA SETTINGS 60################################ 61# NMEA provider (1=Modem Processor, 0=Application Processor) 62NMEA_PROVIDER=0 63 64# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) 65SGLTE_TARGET=0 66 67################################################## 68# Select technology for LPPe Control Plane 69################################################## 70# 0x1: DBH for LPPe CP 71# 0x2: WLAN AP Measurements for LPPe CP 72LPPE_CP_TECHNOLOGY = 0 73 74################################################## 75# Select technology for LPPe User Plane 76################################################## 77# 0x1: DBH for LPPe UP 78# 0x2: WLAN AP Measurements for LPPe UP 79LPPE_UP_TECHNOLOGY = 0 80 81################################################## 82# AGPS_CONFIG_INJECT 83################################################## 84# enable/disable injection of AGPS configurations: 85# SUPL_VER 86# SUPL_HOST 87# SUPL_PORT 88# SUPL_MODE 89# SUPL_ES 90# C2K_HOST 91# C2K_PORT 92# LPP_PROFILE 93# A_GLONASS_POS_PROTOCOL_SELECT 94# USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL 95# GPS_LOCK 96# 0: disable 97# 1: enable 98AGPS_CONFIG_INJECT = 1 99 100# AP Coarse Timestamp Uncertainty 101################################################## 102# default : 10 103# or as per clock uncertainty of product 104AP_TIMESTAMP_UNCERTAINTY = 10 105 106##################################### 107#DR_SYNC Pulse Availability 108##################################### 109# 0 : DR_SYNC pulse not available (default) 110# 1 : DR_SYNC pulse available 111DR_SYNC_ENABLED = 0 112 113##################################### 114#PPS Device name 115##################################### 116PPS_DEVICENAME = /dev/pps0 117 118##################################### 119#AP Clock Accuracy 120##################################### 121AP_CLOCK_PPM = 100 122 123##################################### 124#MAX ms difference to detect missing pulse 125##################################### 126MISSING_PULSE_TIME_DELTA = 900 127 128##################################### 129#Propagation time uncertainty 130##################################### 131PROPAGATION_TIME_UNCERTAINTY = 1 132