• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1# FLASH layout file for Beagle board.
2#
3# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
4# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
5# Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
6#
7#    This program and the accompanying materials
8#    are licensed and made available under the terms and conditions of the BSD License
9#    which accompanies this distribution. The full text of the license may be found at
10#    http://opensource.org/licenses/bsd-license.php
11#
12#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
13#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
14#
15
16################################################################################
17#
18# FD Section
19# The [FD] Section is made up of the definition statements and a
20# description of what goes into  the Flash Device Image.  Each FD section
21# defines one flash "device" image.  A flash device image may be one of
22# the following: Removable media bootable image (like a boot floppy
23# image,) an Option ROM image (that would be "flashed" into an add-in
24# card,) a System "Flash"  image (that would be burned into a system's
25# flash) or an Update ("Capsule") image that will be used to update and
26# existing system flash.
27#
28################################################################################
29
30
31[FD.BeagleBoard_EFI]
32BaseAddress   = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.
33Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device
34ErasePolarity = 1
35BlockSize     = 0x1
36NumBlocks     = 0xB0000
37
38################################################################################
39#
40# Following are lists of FD Region layout which correspond to the locations of different
41# images within the flash device.
42#
43# Regions must be defined in ascending order and may not overlap.
44#
45# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
46# the pipe "|" character, followed by the size of the region, also in hex with the leading
47# "0x" characters. Like:
48# Offset|Size
49# PcdOffsetCName|PcdSizeCName
50# RegionType <FV, DATA, or FILE>
51#
52################################################################################
530x00000000|0x00000200
54FILE = BeagleBoardPkg/ConfigurationHeader.bin
55
560x00000200|0x00000008
57DATA = {
58  0xF8, 0xFD, 0x0A, 0x00,   # image size:   0xB0000 - 0x208 == 0xAFDF8
59  0x00, 0x80, 0x00, 0x80    # entry point:  0x80008000
60}
61
620x00000208|0x000AFDF8
63gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
64FV = FVMAIN_COMPACT
65
66################################################################################
67#
68# FV Section
69#
70# [FV] section is used to define what components or modules are placed within a flash
71# device file.  This section also defines order the components and modules are positioned
72# within the image.  The [FV] section consists of define statements, set statements and
73# module statements.
74#
75################################################################################
76
77[FV.FvMain]
78BlockSize          = 0x1
79NumBlocks          = 0         # This FV gets compressed so make it just big enough
80FvAlignment        = 8         # FV alignment and FV attributes setting.
81ERASE_POLARITY     = 1
82MEMORY_MAPPED      = TRUE
83STICKY_WRITE       = TRUE
84LOCK_CAP           = TRUE
85LOCK_STATUS        = TRUE
86WRITE_DISABLED_CAP = TRUE
87WRITE_ENABLED_CAP  = TRUE
88WRITE_STATUS       = TRUE
89WRITE_LOCK_CAP     = TRUE
90WRITE_LOCK_STATUS  = TRUE
91READ_DISABLED_CAP  = TRUE
92READ_ENABLED_CAP   = TRUE
93READ_STATUS        = TRUE
94READ_LOCK_CAP      = TRUE
95READ_LOCK_STATUS   = TRUE
96FvNameGuid         = d0dd3e90-343d-4cb3-8f69-772214989282
97
98  INF MdeModulePkg/Core/Dxe/DxeMain.inf
99
100  #
101  # PI DXE Drivers producing Architectural Protocols (EFI Services)
102  #
103  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
104
105  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
106  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
107  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
108  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
109  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
110  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
111
112  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
113  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
114  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
115  INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
116  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
117
118  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
119  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
120  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
121
122!if $(TARGET) == RELEASE
123  #
124  # Semi-hosting filesystem
125  #
126  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
127!endif
128
129  #
130  # Nand Flash
131  #
132  INF Omap35xxPkg/Flash/Flash.inf
133
134  #
135  # MMC/SD
136  #
137  INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
138  INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf
139
140  #
141  # I2C
142  #
143  INF Omap35xxPkg/SmbusDxe/Smbus.inf
144
145  #
146  # SoC Drivers
147  #
148  INF Omap35xxPkg/Gpio/Gpio.inf
149  INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
150  INF Omap35xxPkg/TimerDxe/TimerDxe.inf
151  INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
152
153  #
154  # Power IC
155  #
156  INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
157
158  #
159  # FAT filesystem + GPT/MBR partitioning
160  #
161  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
162  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
163  INF FatPkg/EnhancedFatDxe/Fat.inf
164  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
165
166  #
167  # USB Support
168  #
169
170  INF Omap35xxPkg/PciEmulation/PciEmulation.inf
171  INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf
172
173  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
174  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
175  INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
176
177  #
178  # UEFI application (Shell Embedded Boot Loader)
179  #
180  INF ShellPkg/Application/Shell/Shell.inf
181
182  #
183  # Bds
184  #
185  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
186  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
187  INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
188  INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
189  INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
190  INF MdeModulePkg/Application/UiApp/UiApp.inf
191
192
193[FV.FVMAIN_COMPACT]
194FvAlignment        = 8
195ERASE_POLARITY     = 1
196MEMORY_MAPPED      = TRUE
197STICKY_WRITE       = TRUE
198LOCK_CAP           = TRUE
199LOCK_STATUS        = TRUE
200WRITE_DISABLED_CAP = TRUE
201WRITE_ENABLED_CAP  = TRUE
202WRITE_STATUS       = TRUE
203WRITE_LOCK_CAP     = TRUE
204WRITE_LOCK_STATUS  = TRUE
205READ_DISABLED_CAP  = TRUE
206READ_ENABLED_CAP   = TRUE
207READ_STATUS        = TRUE
208READ_LOCK_CAP      = TRUE
209READ_LOCK_STATUS   = TRUE
210
211  INF ArmPlatformPkg/PrePi/PeiUniCore.inf
212
213  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
214    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
215      SECTION FV_IMAGE = FVMAIN
216    }
217  }
218
219
220################################################################################
221#
222# Rules are use with the [FV] section's module INF type to define
223# how an FFS file is created for a given INF file. The following Rule are the default
224# rules for the different module type. User can add the customized rules to define the
225# content of the FFS file.
226#
227################################################################################
228
229
230############################################################################
231# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
232############################################################################
233#
234#[Rule.Common.DXE_DRIVER]
235#  FILE DRIVER = $(NAMED_GUID) {
236#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
237#    COMPRESS PI_STD {
238#      GUIDED {
239#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
240#        UI       STRING="$(MODULE_NAME)" Optional
241#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
242#      }
243#    }
244#  }
245#
246############################################################################
247
248[Rule.Common.SEC]
249  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
250    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
251  }
252
253[Rule.Common.PEI_CORE]
254  FILE PEI_CORE = $(NAMED_GUID) {
255    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
256    UI     STRING ="$(MODULE_NAME)" Optional
257  }
258
259[Rule.Common.PEIM]
260  FILE PEIM = $(NAMED_GUID) {
261     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
262     PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
263     UI       STRING="$(MODULE_NAME)" Optional
264  }
265
266[Rule.Common.PEIM.TIANOCOMPRESSED]
267  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
268    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
269    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
270      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
271      UI        STRING="$(MODULE_NAME)" Optional
272    }
273  }
274
275[Rule.Common.DXE_CORE]
276  FILE DXE_CORE = $(NAMED_GUID) {
277    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
278    UI       STRING="$(MODULE_NAME)" Optional
279  }
280
281
282[Rule.Common.UEFI_DRIVER]
283  FILE DRIVER = $(NAMED_GUID) {
284    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
285    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
286    UI           STRING="$(MODULE_NAME)" Optional
287  }
288
289[Rule.Common.DXE_DRIVER]
290  FILE DRIVER = $(NAMED_GUID) {
291    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
292    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
293    UI           STRING="$(MODULE_NAME)" Optional
294  }
295
296[Rule.Common.DXE_RUNTIME_DRIVER]
297  FILE DRIVER = $(NAMED_GUID) {
298    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
299    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
300    UI           STRING="$(MODULE_NAME)" Optional
301  }
302
303[Rule.Common.UEFI_APPLICATION]
304  FILE APPLICATION = $(NAMED_GUID) {
305    UI     STRING ="$(MODULE_NAME)" Optional
306    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
307  }
308
309[Rule.Common.UEFI_DRIVER.BINARY]
310  FILE DRIVER = $(NAMED_GUID) {
311    DXE_DEPEX DXE_DEPEX Optional      |.depex
312    PE32      PE32                    |.efi
313    UI        STRING="$(MODULE_NAME)" Optional
314    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
315  }
316
317[Rule.Common.UEFI_APPLICATION.BINARY]
318  FILE APPLICATION = $(NAMED_GUID) {
319    PE32      PE32                    |.efi
320    UI        STRING="$(MODULE_NAME)" Optional
321    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
322  }
323