• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /** @file
2 Common Libarary  for PEI USB.
3 
4 Copyright (c) 1999 - 2010, Intel Corporation. All rights reserved.<BR>
5 
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions
8 of the BSD License which accompanies this distribution.  The
9 full text of the license may be found at
10 http://opensource.org/licenses/bsd-license.php
11 
12 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
13 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
14 
15 **/
16 
17 #ifndef _PEI_USB_LIB_H_
18 #define _PEI_USB_LIB_H_
19 //
20 // Standard device request and request type
21 // By [Spec-USB20/Chapter-9.4]
22 //
23 #define USB_DEV_GET_STATUS                  0x00
24 #define USB_DEV_GET_STATUS_REQ_TYPE_D       0x80 // Receiver : Device
25 #define USB_DEV_GET_STATUS_REQ_TYPE_I       0x81 // Receiver : Interface
26 #define USB_DEV_GET_STATUS_REQ_TYPE_E       0x82 // Receiver : Endpoint
27 
28 #define USB_DEV_CLEAR_FEATURE               0x01
29 #define USB_DEV_CLEAR_FEATURE_REQ_TYPE_D    0x00 // Receiver : Device
30 #define USB_DEV_CLEAR_FEATURE_REQ_TYPE_I    0x01 // Receiver : Interface
31 #define USB_DEV_CLEAR_FEATURE_REQ_TYPE_E    0x02 // Receiver : Endpoint
32 
33 #define USB_DEV_SET_FEATURE                 0x03
34 #define USB_DEV_SET_FEATURE_REQ_TYPE_D      0x00 // Receiver : Device
35 #define USB_DEV_SET_FEATURE_REQ_TYPE_I      0x01 // Receiver : Interface
36 #define USB_DEV_SET_FEATURE_REQ_TYPE_E      0x02 // Receiver : Endpoint
37 
38 #define USB_DEV_SET_ADDRESS                 0x05
39 #define USB_DEV_SET_ADDRESS_REQ_TYPE        0x00
40 
41 #define USB_DEV_GET_DESCRIPTOR              0x06
42 #define USB_DEV_GET_DESCRIPTOR_REQ_TYPE     0x80
43 
44 #define USB_DEV_SET_DESCRIPTOR              0x07
45 #define USB_DEV_SET_DESCRIPTOR_REQ_TYPE     0x00
46 
47 #define USB_DEV_GET_CONFIGURATION           0x08
48 #define USB_DEV_GET_CONFIGURATION_REQ_TYPE  0x80
49 
50 #define USB_DEV_SET_CONFIGURATION           0x09
51 #define USB_DEV_SET_CONFIGURATION_REQ_TYPE  0x00
52 
53 #define USB_DEV_GET_INTERFACE               0x0A
54 #define USB_DEV_GET_INTERFACE_REQ_TYPE      0x81
55 
56 #define USB_DEV_SET_INTERFACE               0x0B
57 #define USB_DEV_SET_INTERFACE_REQ_TYPE      0x01
58 
59 #define USB_DEV_SYNCH_FRAME                 0x0C
60 #define USB_DEV_SYNCH_FRAME_REQ_TYPE        0x82
61 
62 //
63 // USB Descriptor types
64 //
65 #define USB_DT_DEVICE     0x01
66 #define USB_DT_CONFIG     0x02
67 #define USB_DT_STRING     0x03
68 #define USB_DT_INTERFACE  0x04
69 #define USB_DT_ENDPOINT   0x05
70 #define USB_DT_HUB        0x29
71 #define USB_DT_HID        0x21
72 
73 //
74 // USB request type
75 //
76 #define USB_TYPE_STANDARD (0x00 << 5)
77 #define USB_TYPE_CLASS    (0x01 << 5)
78 #define USB_TYPE_VENDOR   (0x02 << 5)
79 #define USB_TYPE_RESERVED (0x03 << 5)
80 
81 //
82 // USB request targer device
83 //
84 #define USB_RECIP_DEVICE    0x00
85 #define USB_RECIP_INTERFACE 0x01
86 #define USB_RECIP_ENDPOINT  0x02
87 #define USB_RECIP_OTHER     0x03
88 
89 typedef enum {
90   EfiUsbEndpointHalt,
91   EfiUsbDeviceRemoteWakeup
92 } EFI_USB_STANDARD_FEATURE_SELECTOR;
93 
94 //
95 // Usb Data recipient type
96 //
97 typedef enum {
98   EfiUsbDevice,
99   EfiUsbInterface,
100   EfiUsbEndpoint
101 } EFI_USB_RECIPIENT;
102 
103 /**
104   Get a given usb descriptor.
105 
106   @param  PeiServices        General-purpose services that are available to every PEIM.
107   @param  UsbIoPpi           Indicates the PEI_USB_IO_PPI instance.
108   @param  Value              Request Value.
109   @param  Index              Request Index.
110   @param  DescriptorLength   Request descriptor Length.
111   @param  Descriptor         Request descriptor.
112 
113 
114   @retval EFI_SUCCESS       Usb descriptor is obtained successfully.
115   @retval EFI_DEVICE_ERROR  Cannot get the usb descriptor due to a hardware error.
116   @retval Others            Other failure occurs.
117 
118 **/
119 EFI_STATUS
120 PeiUsbGetDescriptor (
121   IN  EFI_PEI_SERVICES         **PeiServices,
122   IN  PEI_USB_IO_PPI           *UsbIoPpi,
123   IN  UINT16                   Value,
124   IN  UINT16                   Index,
125   IN  UINT16                   DescriptorLength,
126   OUT VOID                     *Descriptor
127   );
128 
129 /**
130   Set a usb device with a specified address.
131 
132   @param  PeiServices        General-purpose services that are available to every PEIM.
133   @param  UsbIoPpi           Indicates the PEI_USB_IO_PPI instance.
134   @param  AddressValue       The address to assign.
135 
136   @retval EFI_SUCCESS        Usb device address is set successfully.
137   @retval EFI_DEVICE_ERROR   Cannot set the usb address due to a hardware error.
138   @retval Others             Other failure occurs.
139 
140 **/
141 EFI_STATUS
142 PeiUsbSetDeviceAddress (
143   IN EFI_PEI_SERVICES         **PeiServices,
144   IN PEI_USB_IO_PPI           *UsbIoPpi,
145   IN UINT16                   AddressValue
146   );
147 
148 /**
149   Clear a given usb feature.
150 
151   @param  PeiServices       General-purpose services that are available to every PEIM.
152   @param  UsbIoPpi          Indicates the PEI_USB_IO_PPI instance.
153   @param  Recipient         The recipient of ClearFeature Request, should be one of Device/Interface/Endpoint.
154   @param  Value             Request Value.
155   @param  Target            Request Index.
156 
157   @retval EFI_SUCCESS       Usb feature is cleared successfully.
158   @retval EFI_DEVICE_ERROR  Cannot clear the usb feature due to a hardware error.
159   @retval Others            Other failure occurs.
160 
161 **/
162 EFI_STATUS
163 PeiUsbClearDeviceFeature (
164   IN EFI_PEI_SERVICES         **PeiServices,
165   IN PEI_USB_IO_PPI           *UsbIoPpi,
166   IN EFI_USB_RECIPIENT        Recipient,
167   IN UINT16                   Value,
168   IN UINT16                   Target
169   );
170 
171 /**
172   Configure a usb device to Configuration 1.
173 
174   @param  PeiServices        General-purpose services that are available to every PEIM.
175   @param  UsbIoPpi           Indicates the PEI_USB_IO_PPI instance.
176 
177   @retval EFI_SUCCESS        Usb device is set to use Configuration 1 successfully.
178   @retval EFI_DEVICE_ERROR   Cannot set the usb device due to a hardware error.
179   @retval Others             Other failure occurs.
180 
181 **/
182 EFI_STATUS
183 PeiUsbSetConfiguration (
184   IN EFI_PEI_SERVICES         **PeiServices,
185   IN PEI_USB_IO_PPI           *UsbIoPpi
186   );
187 
188 /**
189   Clear Endpoint Halt.
190 
191   @param  PeiServices       General-purpose services that are available to every PEIM.
192   @param  UsbIoPpi          Indicates the PEI_USB_IO_PPI instance.
193   @param  EndpointAddress   The endpoint address.
194 
195   @retval EFI_SUCCESS       Endpoint halt is cleared successfully.
196   @retval EFI_DEVICE_ERROR  Cannot clear the endpoint halt status due to a hardware error.
197   @retval Others            Other failure occurs.
198 
199 **/
200 EFI_STATUS
201 PeiUsbClearEndpointHalt (
202   IN EFI_PEI_SERVICES         **PeiServices,
203   IN PEI_USB_IO_PPI           *UsbIoPpi,
204   IN UINT8                    EndpointAddress
205   );
206 
207 /**
208   Judge if the port is connected with a usb device or not.
209 
210   @param  PortStatus  The usb port status gotten.
211 
212   @retval TRUE        A usb device is connected with the port.
213   @retval FALSE       No usb device is connected with the port.
214 
215 **/
216 BOOLEAN
217 IsPortConnect (
218   IN UINT16  PortStatus
219   );
220 
221 /**
222   Judge if the port is connected with a low-speed usb device or not.
223 
224   @param  PortStatus  The usb port status gotten.
225 
226   @retval TRUE        A low-speed usb device is connected with the port.
227   @retval FALSE       No low-speed usb device is connected with the port.
228 
229 **/
230 BOOLEAN
231 IsPortLowSpeedDeviceAttached (
232   IN UINT16  PortStatus
233   );
234 
235 /**
236   Judge if the port is in "connection change" status or not.
237 
238   @param  PortChangeStatus  The usb port change status gotten.
239 
240   @retval TRUE              The port is in "connection change" status.
241   @retval FALSE             The port is NOT in "connection change" status.
242 
243 **/
244 BOOLEAN
245 IsPortConnectChange (
246   IN UINT16  PortChangeStatus
247   );
248 #endif
249