• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /** @file
2   This file provides a definition of the EFI IPv6 Configuration
3   Protocol.
4 
5 Copyright (c) 2008 - 2011, Intel Corporation. All rights reserved.<BR>
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution.  The full text of the license may be found at<BR>
9 http://opensource.org/licenses/bsd-license.php
10 
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
13 
14 **/
15 #ifndef __EFI_IP6CONFIG_PROTOCOL_H__
16 #define __EFI_IP6CONFIG_PROTOCOL_H__
17 
18 #include <Protocol/Ip6.h>
19 
20 #define EFI_IP6_CONFIG_PROTOCOL_GUID \
21   { \
22     0x937fe521, 0x95ae, 0x4d1a, {0x89, 0x29, 0x48, 0xbc, 0xd9, 0x0a, 0xd3, 0x1a } \
23   }
24 
25 typedef struct _EFI_IP6_CONFIG_PROTOCOL EFI_IP6_CONFIG_PROTOCOL;
26 
27 ///
28 /// EFI_IP6_CONFIG_DATA_TYPE
29 ///
30 typedef enum {
31   ///
32   /// The interface information of the communication
33   /// device this EFI IPv6 Configuration Protocol instance manages.
34   /// This type of data is read only.The corresponding Data is of type
35   /// EFI_IP6_CONFIG_INTERFACE_INFO.
36   ///
37   Ip6ConfigDataTypeInterfaceInfo,
38   ///
39   /// The alternative interface ID for the
40   /// communication device this EFI IPv6 Configuration Protocol
41   /// instance manages if the link local IPv6 address generated from
42   /// the interfaced ID based on the default source the EFI IPv6
43   /// Protocol uses is a duplicate address. The length of the interface
44   /// ID is 64 bit. The corresponding Data is of type
45   /// EFI_IP6_CONFIG_INTERFACE_ID.
46   ///
47   Ip6ConfigDataTypeAltInterfaceId,
48   ///
49   /// The general configuration policy for the EFI IPv6 network
50   /// stack running on the communication device this EFI IPv6
51   /// Configuration Protocol instance manages. The policy will affect
52   /// other configuration settings. The corresponding Data is of type
53   /// EFI_IP6_CONFIG_POLICY.
54   ///
55   Ip6ConfigDataTypePolicy,
56   ///
57   /// The number of consecutive
58   /// Neighbor Solicitation messages sent while performing Duplicate
59   /// Address Detection on a tentative address. A value of zero
60   /// indicates that Duplicate Address Detection will not be performed
61   /// on tentative addresses. The corresponding Data is of type
62   /// EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS.
63   ///
64   Ip6ConfigDataTypeDupAddrDetectTransmits,
65   ///
66   /// The station addresses set manually for the EFI
67   /// IPv6 network stack. It is only configurable when the policy is
68   /// Ip6ConfigPolicyManual. The corresponding Data is a
69   /// pointer to an array of EFI_IPv6_ADDRESS instances.
70   ///
71   Ip6ConfigDataTypeManualAddress,
72   ///
73   /// The gateway addresses set manually for the EFI IPv6
74   /// network stack running on the communication device this EFI
75   /// IPv6 Configuration Protocol manages. It is not configurable when
76   /// the policy is Ip6ConfigPolicyAutomatic. The gateway
77   /// addresses must be unicast IPv6 addresses. The corresponding
78   /// Data is a pointer to an array of EFI_IPv6_ADDRESS instances.
79   ///
80   Ip6ConfigDataTypeGateway,
81   ///
82   /// The DNS server list for the EFI IPv6 network stack
83   /// running on the communication device this EFI IPv6
84   /// Configuration Protocol manages. It is not configurable when the
85   /// policy is Ip6ConfigPolicyAutomatic.The DNS server
86   /// addresses must be unicast IPv6 addresses. The corresponding
87   /// Data is a pointer to an array of EFI_IPv6_ADDRESS instances.
88   ///
89   Ip6ConfigDataTypeDnsServer,
90   ///
91   /// The number of this enumeration memebers.
92   ///
93   Ip6ConfigDataTypeMaximum
94 } EFI_IP6_CONFIG_DATA_TYPE;
95 
96 ///
97 /// EFI_IP6_CONFIG_INTERFACE_INFO
98 /// describes the operational state of the interface this
99 /// EFI IPv6 Configuration Protocol instance manages.
100 ///
101 typedef struct {
102   ///
103   /// The name of the interface. It is a NULL-terminated string.
104   ///
105   CHAR16                Name[32];
106   ///
107   /// The interface type of the network interface.
108   ///
109   UINT8                 IfType;
110   ///
111   /// The size, in bytes, of the network interface's hardware address.
112   ///
113   UINT32                HwAddressSize;
114   ///
115   /// The hardware address for the network interface.
116   ///
117   EFI_MAC_ADDRESS       HwAddress;
118   ///
119   /// Number of EFI_IP6_ADDRESS_INFO structures pointed to by AddressInfo.
120   ///
121   UINT32                AddressInfoCount;
122   ///
123   /// Pointer to an array of EFI_IP6_ADDRESS_INFO instances
124   /// which contain the local IPv6 addresses and the corresponding
125   /// prefix length information. Set to NULL if AddressInfoCount
126   /// is zero.
127   ///
128   EFI_IP6_ADDRESS_INFO  *AddressInfo;
129   ///
130   /// Number of route table entries in the following RouteTable.
131   ///
132   UINT32                RouteCount;
133   ///
134   /// The route table of the IPv6 network stack runs on this interface.
135   /// Set to NULL if RouteCount is zero.
136   ///
137   EFI_IP6_ROUTE_TABLE   *RouteTable;
138 } EFI_IP6_CONFIG_INTERFACE_INFO;
139 
140 ///
141 /// EFI_IP6_CONFIG_INTERFACE_ID
142 /// describes the 64-bit interface ID.
143 ///
144 typedef struct {
145   UINT8                 Id[8];
146 } EFI_IP6_CONFIG_INTERFACE_ID;
147 
148 ///
149 /// EFI_IP6_CONFIG_POLICY
150 /// defines the general configuration policy the EFI IPv6
151 /// Configuration Protocol supports.
152 ///
153 typedef enum {
154   ///
155   /// Under this policy, the IpI6ConfigDataTypeManualAddress,
156   /// Ip6ConfigDataTypeGateway and Ip6ConfigDataTypeDnsServer
157   /// configuration data are required to be set manually.
158   /// The EFI IPv6 Protocol will get all required configuration
159   /// such as address, prefix and gateway settings from the EFI
160   /// IPv6 Configuration protocol.
161   ///
162   Ip6ConfigPolicyManual,
163   ///
164   /// Under this policy, the IpI6ConfigDataTypeManualAddress,
165   /// Ip6ConfigDataTypeGateway and Ip6ConfigDataTypeDnsServer
166   /// configuration data are not allowed to set via SetData().
167   /// All of these configurations are retrieved from some auto
168   /// configuration mechanism.
169   /// The EFI IPv6 Protocol will use the IPv6 stateless address
170   /// autoconfiguration mechanism and/or the IPv6 stateful address
171   /// autoconfiguration mechanism described in the related RFCs to
172   /// get address and other configuration information
173   ///
174   Ip6ConfigPolicyAutomatic
175 } EFI_IP6_CONFIG_POLICY;
176 
177 ///
178 /// EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
179 /// describes the number of consecutive Neighbor Solicitation messages sent
180 /// while performing Duplicate Address Detection on a tentative address.
181 /// The default value for a newly detected communication device is 1.
182 ///
183 typedef struct {
184   UINT32    DupAddrDetectTransmits;  ///< The number of consecutive Neighbor Solicitation messages sent.
185 } EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS;
186 
187 ///
188 /// EFI_IP6_CONFIG_MANUAL_ADDRESS
189 /// is used to set the station address information for the EFI IPv6 network
190 /// stack manually when the policy is Ip6ConfigPolicyManual.
191 ///
192 typedef struct {
193   EFI_IPv6_ADDRESS      Address;       ///< The IPv6 unicast address.
194   BOOLEAN               IsAnycast;     ///< Set to TRUE if Address is anycast.
195   UINT8                 PrefixLength;  ///< The length, in bits, of the prefix associated with this Address.
196 } EFI_IP6_CONFIG_MANUAL_ADDRESS;
197 
198 
199 /**
200   Set the configuration for the EFI IPv6 network stack running on the communication
201   device this EFI IPv6 Configuration Protocol instance manages.
202 
203   This function is used to set the configuration data of type DataType for the EFI
204   IPv6 network stack running on the communication device this EFI IPv6 Configuration
205   Protocol instance manages.
206 
207   The DataSize is used to calculate the count of structure instances in the Data for
208   some DataType that multiple structure instances are allowed.
209 
210   This function is always non-blocking. When setting some type of configuration data,
211   an asynchronous process is invoked to check the correctness of the data, such as
212   doing Duplicate Address Detection on the manually set local IPv6 addresses.
213   EFI_NOT_READY is returned immediately to indicate that such an asynchronous process
214   is invoked and the process is not finished yet. The caller willing to get the result
215   of the asynchronous process is required to call RegisterDataNotify() to register an
216   event on the specified configuration data. Once the event is signaled, the caller
217   can call GetData() to get back the configuration data in order to know the result.
218   For other types of configuration data that do not require an asynchronous configuration
219   process, the result of the operation is immediately returned.
220 
221   @param[in]     This           Pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
222   @param[in]     DataType       The type of data to set.
223   @param[in]     DataSize       Size of the buffer pointed to by Data in bytes.
224   @param[in]     Data           The data buffer to set. The type of the data buffer is
225                                 associated with the DataType.
226 
227   @retval EFI_SUCCESS           The specified configuration data for the EFI IPv6
228                                 network stack is set successfully.
229   @retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
230                                 - This is NULL.
231                                 - Data is NULL.
232                                 - One or more fields in Data do not match the requirement of the
233                                   data type indicated by DataType.
234   @retval EFI_WRITE_PROTECTED   The specified configuration data is read-only or the specified
235                                 configuration data can not be set under the current policy
236   @retval EFI_ACCESS_DENIED     Another set operation on the specified configuration
237                                 data is already in process.
238   @retval EFI_NOT_READY         An asynchronous process is invoked to set the specified
239                                 configuration data and the process is not finished yet.
240   @retval EFI_BAD_BUFFER_SIZE   The DataSize does not match the size of the type
241                                 indicated by DataType.
242   @retval EFI_UNSUPPORTED       This DataType is not supported.
243   @retval EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
244   @retval EFI_DEVICE_ERROR      An unexpected system error or network error occurred.
245 
246 **/
247 typedef
248 EFI_STATUS
249 (EFIAPI *EFI_IP6_CONFIG_SET_DATA)(
250   IN EFI_IP6_CONFIG_PROTOCOL    *This,
251   IN EFI_IP6_CONFIG_DATA_TYPE   DataType,
252   IN UINTN                      DataSize,
253   IN VOID                       *Data
254   );
255 
256 /**
257   Get the configuration data for the EFI IPv6 network stack running on the communication
258   device this EFI IPv6 Configuration Protocol instance manages.
259 
260   This function returns the configuration data of type DataType for the EFI IPv6 network
261   stack running on the communication device this EFI IPv6 Configuration Protocol instance
262   manages.
263 
264   The caller is responsible for allocating the buffer used to return the specified
265   configuration data and the required size will be returned to the caller if the size of
266   the buffer is too small.
267 
268   EFI_NOT_READY is returned if the specified configuration data is not ready due to an
269   already in progress asynchronous configuration process. The caller can call RegisterDataNotify()
270   to register an event on the specified configuration data. Once the asynchronous configuration
271   process is finished, the event will be signaled and a subsequent GetData() call will return
272   the specified configuration data.
273 
274   @param[in]     This           Pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
275   @param[in]     DataType       The type of data to get.
276   @param[in,out] DataSize       On input, in bytes, the size of Data. On output, in bytes, the
277                                 size of buffer required to store the specified configuration data.
278   @param[in]     Data           The data buffer in which the configuration data is returned. The
279                                 type of the data buffer is associated with the DataType.
280 
281   @retval EFI_SUCCESS           The specified configuration data is got successfully.
282   @retval EFI_INVALID_PARAMETER One or more of the followings are TRUE:
283                                 - This is NULL.
284                                 - DataSize is NULL.
285                                 - Data is NULL if *DataSize is not zero.
286   @retval EFI_BUFFER_TOO_SMALL  The size of Data is too small for the specified configuration data
287                                 and the required size is returned in DataSize.
288   @retval EFI_NOT_READY         The specified configuration data is not ready due to an already in
289                                 progress asynchronous configuration process.
290   @retval EFI_NOT_FOUND         The specified configuration data is not found.
291 
292 **/
293 typedef
294 EFI_STATUS
295 (EFIAPI *EFI_IP6_CONFIG_GET_DATA)(
296   IN EFI_IP6_CONFIG_PROTOCOL    *This,
297   IN EFI_IP6_CONFIG_DATA_TYPE   DataType,
298   IN OUT UINTN                  *DataSize,
299   IN VOID                       *Data   OPTIONAL
300   );
301 
302 /**
303   Register an event that is to be signaled whenever a configuration process on the specified
304   configuration data is done.
305 
306   This function registers an event that is to be signaled whenever a configuration process
307   on the specified configuration data is done. An event can be registered for different DataType
308   simultaneously and the caller is responsible for determining which type of configuration data
309   causes the signaling of the event in such case.
310 
311   @param[in]     This           Pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
312   @param[in]     DataType       The type of data to unregister the event for.
313   @param[in]     Event          The event to register.
314 
315   @retval EFI_SUCCESS           The notification event for the specified configuration data is
316                                 registered.
317   @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL.
318   @retval EFI_UNSUPPORTED       The configuration data type specified by DataType is not
319                                 supported.
320   @retval EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
321   @retval EFI_ACCESS_DENIED     The Event is already registered for the DataType.
322 
323 **/
324 typedef
325 EFI_STATUS
326 (EFIAPI *EFI_IP6_CONFIG_REGISTER_NOTIFY)(
327   IN EFI_IP6_CONFIG_PROTOCOL    *This,
328   IN EFI_IP6_CONFIG_DATA_TYPE   DataType,
329   IN EFI_EVENT                  Event
330   );
331 
332 /**
333   Remove a previously registered event for the specified configuration data.
334 
335   This function removes a previously registered event for the specified configuration data.
336 
337   @param[in]     This           Pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
338   @param[in]     DataType       The type of data to remove the previously registered event for.
339   @param[in]     Event          The event to unregister.
340 
341   @retval EFI_SUCCESS           The event registered for the specified configuration data is removed.
342   @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL.
343   @retval EFI_NOT_FOUND         The Event has not been registered for the specified
344                                 DataType.
345 
346 **/
347 typedef
348 EFI_STATUS
349 (EFIAPI *EFI_IP6_CONFIG_UNREGISTER_NOTIFY)(
350   IN EFI_IP6_CONFIG_PROTOCOL    *This,
351   IN EFI_IP6_CONFIG_DATA_TYPE   DataType,
352   IN EFI_EVENT                  Event
353   );
354 
355 ///
356 /// The EFI_IP6_CONFIG_PROTOCOL provides the mechanism to set and get various
357 /// types of configurations for the EFI IPv6 network stack.
358 ///
359 struct _EFI_IP6_CONFIG_PROTOCOL {
360   EFI_IP6_CONFIG_SET_DATA           SetData;
361   EFI_IP6_CONFIG_GET_DATA           GetData;
362   EFI_IP6_CONFIG_REGISTER_NOTIFY    RegisterDataNotify;
363   EFI_IP6_CONFIG_UNREGISTER_NOTIFY  UnregisterDataNotify;
364 };
365 
366 extern EFI_GUID gEfiIp6ConfigProtocolGuid;
367 
368 #endif
369 
370