1 /** @file
2 Base Performance Library which provides no service.
3
4 Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
5 This program and the accompanying materials
6 are licensed and made available under the terms and conditions of the BSD License
7 which accompanies this distribution. The full text of the license may be found at
8 http://opensource.org/licenses/bsd-license.php.
9
10 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
11 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
12
13 **/
14
15
16 #include <Base.h>
17
18
19 #include <Library/PerformanceLib.h>
20 #include <Library/DebugLib.h>
21 #include <Library/PcdLib.h>
22
23 /**
24 Creates a record for the beginning of a performance measurement.
25
26 Creates a record that contains the Handle, Token, and Module.
27 If TimeStamp is not zero, then TimeStamp is added to the record as the start time.
28 If TimeStamp is zero, then this function reads the current time stamp
29 and adds that time stamp value to the record as the start time.
30
31 @param Handle The pointer to environment specific context used
32 to identify the component being measured.
33 @param Token The pointer to a Null-terminated ASCII string
34 that identifies the component being measured.
35 @param Module The pointer to a Null-terminated ASCII string
36 that identifies the module being measured.
37 @param TimeStamp 64-bit time stamp.
38
39 @retval RETURN_SUCCESS The start of the measurement was recorded.
40 @retval RETURN_OUT_OF_RESOURCES There are not enough resources to record the measurement.
41 @retval RETURN_DEVICE_ERROR A device error reading the time stamp.
42
43 **/
44 RETURN_STATUS
45 EFIAPI
StartPerformanceMeasurement(IN CONST VOID * Handle,OPTIONAL IN CONST CHAR8 * Token,OPTIONAL IN CONST CHAR8 * Module,OPTIONAL IN UINT64 TimeStamp)46 StartPerformanceMeasurement (
47 IN CONST VOID *Handle, OPTIONAL
48 IN CONST CHAR8 *Token, OPTIONAL
49 IN CONST CHAR8 *Module, OPTIONAL
50 IN UINT64 TimeStamp
51 )
52 {
53 return RETURN_SUCCESS;
54 }
55
56 /**
57 Fills in the end time of a performance measurement.
58
59 Looks up the record that matches Handle, Token, and Module.
60 If the record can not be found then return RETURN_NOT_FOUND.
61 If the record is found and TimeStamp is not zero,
62 then TimeStamp is added to the record as the end time.
63 If the record is found and TimeStamp is zero, then this function reads
64 the current time stamp and adds that time stamp value to the record as the end time.
65
66 @param Handle The pointer to environment specific context used
67 to identify the component being measured.
68 @param Token The pointer to a Null-terminated ASCII string
69 that identifies the component being measured.
70 @param Module The pointer to a Null-terminated ASCII string
71 that identifies the module being measured.
72 @param TimeStamp 64-bit time stamp.
73
74 @retval RETURN_SUCCESS The end of the measurement was recorded.
75 @retval RETURN_NOT_FOUND The specified measurement record could not be found.
76 @retval RETURN_DEVICE_ERROR A device error reading the time stamp.
77
78 **/
79 RETURN_STATUS
80 EFIAPI
EndPerformanceMeasurement(IN CONST VOID * Handle,OPTIONAL IN CONST CHAR8 * Token,OPTIONAL IN CONST CHAR8 * Module,OPTIONAL IN UINT64 TimeStamp)81 EndPerformanceMeasurement (
82 IN CONST VOID *Handle, OPTIONAL
83 IN CONST CHAR8 *Token, OPTIONAL
84 IN CONST CHAR8 *Module, OPTIONAL
85 IN UINT64 TimeStamp
86 )
87 {
88 return RETURN_SUCCESS;
89 }
90
91 /**
92 Attempts to retrieve a performance measurement log entry from the performance measurement log.
93 It can also retrieve the log created by StartPerformanceMeasurementEx and EndPerformanceMeasurementEx,
94 and then eliminate the Identifier.
95
96 Attempts to retrieve the performance log entry specified by LogEntryKey. If LogEntryKey is
97 zero on entry, then an attempt is made to retrieve the first entry from the performance log,
98 and the key for the second entry in the log is returned. If the performance log is empty,
99 then no entry is retrieved and zero is returned. If LogEntryKey is not zero, then the performance
100 log entry associated with LogEntryKey is retrieved, and the key for the next entry in the log is
101 returned. If LogEntryKey is the key for the last entry in the log, then the last log entry is
102 retrieved and an implementation specific non-zero key value that specifies the end of the performance
103 log is returned. If LogEntryKey is equal this implementation specific non-zero key value, then no entry
104 is retrieved and zero is returned. In the cases where a performance log entry can be returned,
105 the log entry is returned in Handle, Token, Module, StartTimeStamp, and EndTimeStamp.
106 If LogEntryKey is not a valid log entry key for the performance measurement log, then ASSERT().
107 If Handle is NULL, then ASSERT().
108 If Token is NULL, then ASSERT().
109 If Module is NULL, then ASSERT().
110 If StartTimeStamp is NULL, then ASSERT().
111 If EndTimeStamp is NULL, then ASSERT().
112
113 @param LogEntryKey On entry, the key of the performance measurement log entry to retrieve.
114 0, then the first performance measurement log entry is retrieved.
115 On exit, the key of the next performance lof entry entry.
116 @param Handle The pointer to environment specific context used to identify the component
117 being measured.
118 @param Token The pointer to a Null-terminated ASCII string that identifies the component
119 being measured.
120 @param Module The pointer to a Null-terminated ASCII string that identifies the module
121 being measured.
122 @param StartTimeStamp The pointer to the 64-bit time stamp that was recorded when the measurement
123 was started.
124 @param EndTimeStamp The pointer to the 64-bit time stamp that was recorded when the measurement
125 was ended.
126
127 @return The key for the next performance log entry (in general case).
128
129 **/
130 UINTN
131 EFIAPI
GetPerformanceMeasurement(IN UINTN LogEntryKey,OUT CONST VOID ** Handle,OUT CONST CHAR8 ** Token,OUT CONST CHAR8 ** Module,OUT UINT64 * StartTimeStamp,OUT UINT64 * EndTimeStamp)132 GetPerformanceMeasurement (
133 IN UINTN LogEntryKey,
134 OUT CONST VOID **Handle,
135 OUT CONST CHAR8 **Token,
136 OUT CONST CHAR8 **Module,
137 OUT UINT64 *StartTimeStamp,
138 OUT UINT64 *EndTimeStamp
139 )
140 {
141 ASSERT (Handle != NULL);
142 ASSERT (Token != NULL);
143 ASSERT (Module != NULL);
144 ASSERT (StartTimeStamp != NULL);
145 ASSERT (EndTimeStamp != NULL);
146
147 return 0;
148 }
149
150 /**
151 Creates a record for the beginning of a performance measurement.
152
153 Creates a record that contains the Handle, Token, Module and Identifier.
154 If TimeStamp is not zero, then TimeStamp is added to the record as the start time.
155 If TimeStamp is zero, then this function reads the current time stamp
156 and adds that time stamp value to the record as the start time.
157
158 @param Handle Pointer to environment specific context used
159 to identify the component being measured.
160 @param Token Pointer to a Null-terminated ASCII string
161 that identifies the component being measured.
162 @param Module Pointer to a Null-terminated ASCII string
163 that identifies the module being measured.
164 @param TimeStamp 64-bit time stamp.
165 @param Identifier 32-bit identifier. If the value is 0, the created record
166 is same as the one created by StartPerformanceMeasurement.
167
168 @retval RETURN_SUCCESS The start of the measurement was recorded.
169 @retval RETURN_OUT_OF_RESOURCES There are not enough resources to record the measurement.
170 @retval RETURN_DEVICE_ERROR A device error reading the time stamp.
171
172 **/
173 RETURN_STATUS
174 EFIAPI
StartPerformanceMeasurementEx(IN CONST VOID * Handle,OPTIONAL IN CONST CHAR8 * Token,OPTIONAL IN CONST CHAR8 * Module,OPTIONAL IN UINT64 TimeStamp,IN UINT32 Identifier)175 StartPerformanceMeasurementEx (
176 IN CONST VOID *Handle, OPTIONAL
177 IN CONST CHAR8 *Token, OPTIONAL
178 IN CONST CHAR8 *Module, OPTIONAL
179 IN UINT64 TimeStamp,
180 IN UINT32 Identifier
181 )
182 {
183 return RETURN_SUCCESS;
184 }
185
186 /**
187 Fills in the end time of a performance measurement.
188
189 Looks up the record that matches Handle, Token, Module and Identifier.
190 If the record can not be found then return RETURN_NOT_FOUND.
191 If the record is found and TimeStamp is not zero,
192 then TimeStamp is added to the record as the end time.
193 If the record is found and TimeStamp is zero, then this function reads
194 the current time stamp and adds that time stamp value to the record as the end time.
195
196 @param Handle Pointer to environment specific context used
197 to identify the component being measured.
198 @param Token Pointer to a Null-terminated ASCII string
199 that identifies the component being measured.
200 @param Module Pointer to a Null-terminated ASCII string
201 that identifies the module being measured.
202 @param TimeStamp 64-bit time stamp.
203 @param Identifier 32-bit identifier. If the value is 0, the found record
204 is same as the one found by EndPerformanceMeasurement.
205
206 @retval RETURN_SUCCESS The end of the measurement was recorded.
207 @retval RETURN_NOT_FOUND The specified measurement record could not be found.
208 @retval RETURN_DEVICE_ERROR A device error reading the time stamp.
209
210 **/
211 RETURN_STATUS
212 EFIAPI
EndPerformanceMeasurementEx(IN CONST VOID * Handle,OPTIONAL IN CONST CHAR8 * Token,OPTIONAL IN CONST CHAR8 * Module,OPTIONAL IN UINT64 TimeStamp,IN UINT32 Identifier)213 EndPerformanceMeasurementEx (
214 IN CONST VOID *Handle, OPTIONAL
215 IN CONST CHAR8 *Token, OPTIONAL
216 IN CONST CHAR8 *Module, OPTIONAL
217 IN UINT64 TimeStamp,
218 IN UINT32 Identifier
219 )
220 {
221 return RETURN_SUCCESS;
222 }
223
224 /**
225 Attempts to retrieve a performance measurement log entry from the performance measurement log.
226 It can also retrieve the log created by StartPerformanceMeasurement and EndPerformanceMeasurement,
227 and then assign the Identifier with 0.
228
229 Attempts to retrieve the performance log entry specified by LogEntryKey. If LogEntryKey is
230 zero on entry, then an attempt is made to retrieve the first entry from the performance log,
231 and the key for the second entry in the log is returned. If the performance log is empty,
232 then no entry is retrieved and zero is returned. If LogEntryKey is not zero, then the performance
233 log entry associated with LogEntryKey is retrieved, and the key for the next entry in the log is
234 returned. If LogEntryKey is the key for the last entry in the log, then the last log entry is
235 retrieved and an implementation specific non-zero key value that specifies the end of the performance
236 log is returned. If LogEntryKey is equal this implementation specific non-zero key value, then no entry
237 is retrieved and zero is returned. In the cases where a performance log entry can be returned,
238 the log entry is returned in Handle, Token, Module, StartTimeStamp, EndTimeStamp and Identifier.
239 If LogEntryKey is not a valid log entry key for the performance measurement log, then ASSERT().
240 If Handle is NULL, then ASSERT().
241 If Token is NULL, then ASSERT().
242 If Module is NULL, then ASSERT().
243 If StartTimeStamp is NULL, then ASSERT().
244 If EndTimeStamp is NULL, then ASSERT().
245 If Identifier is NULL, then ASSERT().
246
247 @param LogEntryKey On entry, the key of the performance measurement log entry to retrieve.
248 0, then the first performance measurement log entry is retrieved.
249 On exit, the key of the next performance lof entry entry.
250 @param Handle Pointer to environment specific context used to identify the component
251 being measured.
252 @param Token Pointer to a Null-terminated ASCII string that identifies the component
253 being measured.
254 @param Module Pointer to a Null-terminated ASCII string that identifies the module
255 being measured.
256 @param StartTimeStamp Pointer to the 64-bit time stamp that was recorded when the measurement
257 was started.
258 @param EndTimeStamp Pointer to the 64-bit time stamp that was recorded when the measurement
259 was ended.
260 @param Identifier Pointer to the 32-bit identifier that was recorded.
261
262 @return The key for the next performance log entry (in general case).
263
264 **/
265 UINTN
266 EFIAPI
GetPerformanceMeasurementEx(IN UINTN LogEntryKey,OUT CONST VOID ** Handle,OUT CONST CHAR8 ** Token,OUT CONST CHAR8 ** Module,OUT UINT64 * StartTimeStamp,OUT UINT64 * EndTimeStamp,OUT UINT32 * Identifier)267 GetPerformanceMeasurementEx (
268 IN UINTN LogEntryKey,
269 OUT CONST VOID **Handle,
270 OUT CONST CHAR8 **Token,
271 OUT CONST CHAR8 **Module,
272 OUT UINT64 *StartTimeStamp,
273 OUT UINT64 *EndTimeStamp,
274 OUT UINT32 *Identifier
275 )
276 {
277 ASSERT (Handle != NULL);
278 ASSERT (Token != NULL);
279 ASSERT (Module != NULL);
280 ASSERT (StartTimeStamp != NULL);
281 ASSERT (EndTimeStamp != NULL);
282 ASSERT (Identifier != NULL);
283
284 return 0;
285 }
286
287 /**
288 Returns TRUE if the performance measurement macros are enabled.
289
290 This function returns TRUE if the PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED bit of
291 PcdPerformanceLibraryPropertyMask is set. Otherwise FALSE is returned.
292
293 @retval TRUE The PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED bit of
294 PcdPerformanceLibraryPropertyMask is set.
295 @retval FALSE The PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED bit of
296 PcdPerformanceLibraryPropertyMask is clear.
297
298 **/
299 BOOLEAN
300 EFIAPI
PerformanceMeasurementEnabled(VOID)301 PerformanceMeasurementEnabled (
302 VOID
303 )
304 {
305 return (BOOLEAN) ((PcdGet8(PcdPerformanceLibraryPropertyMask) & PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED) != 0);
306 }
307