1Device Driver Testcases: 2 3These tests should always be run individually and never concurrently. Since 4these test will manipulate devices and may leave them in an unstable state, 5these tests should not be run when other important system tasks are being 6performed. These tests shouldn't be included in any system wide test scripts 7as they may corrupt the test data from those tests. 8 9To build and execute these tests: 10 111) change into each of the directories you want to test and run "make". 122) run the command 'insmod' on the .o file in the kernel space directory. 13Note: If the insmod command fails with a QM_MODULE error, the module functions 14 are outdated and need to be upgraded. 153) Run "lsmod" to make sure the modules is loaded. 164) Change to the user space program directory and run the *.sh file or the 17 program executable. 185) The results should be output to the display. 196) These tests will complete very quickly, usually in a few seconds so if the 20 system doesn't return from the test it's probably hung and a re-boot may be 21 required. 22