• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1#!@PERL@
2##===- tools/llvm-config ---------------------------------------*- perl -*-===##
3#
4#                     The LLVM Compiler Infrastructure
5#
6# This file is distributed under the University of Illinois Open Source
7# License. See LICENSE.TXT for details.
8#
9##===----------------------------------------------------------------------===##
10#
11# Synopsis: Prints out compiler options needed to build against an installed
12#           copy of LLVM.
13#
14# Syntax:   llvm-config OPTIONS... [COMPONENTS...]
15#
16##===----------------------------------------------------------------------===##
17
18use 5.006;
19use strict;
20use warnings;
21use Cwd 'abs_path';
22
23#---- begin autoconf values ----
24my $PACKAGE_NAME        = q{@PACKAGE_NAME@};
25my $VERSION             = q{@PACKAGE_VERSION@};
26my $PREFIX              = q{@LLVM_PREFIX@};
27my $LLVM_CONFIGTIME     = q{@LLVM_CONFIGTIME@};
28my $LLVM_SRC_ROOT       = q{@abs_top_srcdir@};
29my $LLVM_OBJ_ROOT       = q{@abs_top_builddir@};
30my $ARCH                = lc(q{@ARCH@});
31my $TARGET_TRIPLE       = q{@target@};
32my $TARGETS_TO_BUILD    = q{@TARGETS_TO_BUILD@};
33my $TARGET_HAS_JIT      = q{@TARGET_HAS_JIT@};
34my @TARGETS_BUILT       = map { lc($_) } qw{@TARGETS_TO_BUILD@};
35#---- end autoconf values ----
36
37# Must pretend x86_64 architecture is really x86, otherwise the native backend
38# won't get linked in.
39$ARCH = "x86" if $ARCH eq "x86_64";
40
41#---- begin Makefile values ----
42my $CPPFLAGS            = q{@LLVM_CPPFLAGS@};
43my $CFLAGS              = q{@LLVM_CFLAGS@};
44my $CXXFLAGS            = q{@LLVM_CXXFLAGS@};
45my $LDFLAGS             = q{@LLVM_LDFLAGS@};
46my $SYSTEM_LIBS         = q{@LIBS@};
47my $LLVM_BUILDMODE      = q{@LLVM_BUILDMODE@};
48#---- end Makefile values ----
49
50# Figure out where llvm-config is being run from.  Primarily, we care if it has
51# been installed, or is running from the build directory, which changes the
52# locations of some files.
53
54# Convert the current executable name into its directory (e.g. ".").
55my ($RUN_DIR) = ($0 =~ /^(.*)\/.*$/);
56
57# Turn the directory into an absolute directory on the file system, also pop up
58# from "bin" into the build or prefix dir.
59my $ABS_RUN_DIR = abs_path("$RUN_DIR/..");
60chomp($ABS_RUN_DIR);
61
62# Compute the absolute object directory build, e.g. "foo/llvm/Debug".
63my $ABS_OBJ_ROOT = "$LLVM_OBJ_ROOT/$LLVM_BUILDMODE";
64$ABS_OBJ_ROOT = abs_path("$ABS_OBJ_ROOT") if (-d $ABS_OBJ_ROOT);
65chomp($ABS_OBJ_ROOT);
66
67my $INCLUDEDIR = "$ABS_RUN_DIR/include";
68my $INCLUDEOPTION = "-I$INCLUDEDIR";
69my $LIBDIR     = "$ABS_RUN_DIR/lib";
70my $BINDIR     = "$ABS_RUN_DIR/bin";
71if ($ABS_RUN_DIR eq $ABS_OBJ_ROOT) {
72  # If we are running out of the build directory, the include dir is in the
73  # srcdir.
74  $INCLUDEDIR = "$LLVM_SRC_ROOT/include";
75  # We need include files from both the srcdir and objdir.
76  $INCLUDEOPTION = "-I$INCLUDEDIR -I$LLVM_OBJ_ROOT/include"
77} else {
78  # If installed, ignore the prefix the tree was configured with, use the
79  # current prefix.
80  $PREFIX = $ABS_RUN_DIR;
81}
82
83sub usage;
84sub fix_library_names (@);
85sub fix_library_files (@);
86sub expand_dependencies (@);
87sub name_map_entries;
88
89# Parse our command-line arguments.
90usage if @ARGV == 0;
91my @components;
92my $has_opt = 0;
93my $want_libs = 0;
94my $want_libnames = 0;
95my $want_libfiles = 0;
96my $want_components = 0;
97foreach my $arg (@ARGV) {
98    if ($arg =~ /^-/) {
99        if ($arg eq "--version") {
100            $has_opt = 1; print "$VERSION\n";
101        } elsif ($arg eq "--prefix") {
102            $has_opt = 1; print "$PREFIX\n";
103        } elsif ($arg eq "--bindir") {
104            $has_opt = 1; print "$BINDIR\n";
105        } elsif ($arg eq "--includedir") {
106            $has_opt = 1; print "$INCLUDEDIR\n";
107        } elsif ($arg eq "--libdir") {
108            $has_opt = 1; print "$LIBDIR\n";
109        } elsif ($arg eq "--cppflags") {
110            $has_opt = 1; print "$INCLUDEOPTION $CPPFLAGS\n";
111        } elsif ($arg eq "--cflags") {
112            $has_opt = 1; print "$INCLUDEOPTION $CFLAGS\n";
113        } elsif ($arg eq "--cxxflags") {
114            $has_opt = 1; print "$INCLUDEOPTION $CXXFLAGS\n";
115        } elsif ($arg eq "--ldflags") {
116            $has_opt = 1; print "-L$LIBDIR $LDFLAGS $SYSTEM_LIBS\n";
117        } elsif ($arg eq "--libs") {
118            $has_opt = 1; $want_libs = 1;
119        } elsif ($arg eq "--libnames") {
120            $has_opt = 1; $want_libnames = 1;
121        } elsif ($arg eq "--libfiles") {
122            $has_opt = 1; $want_libfiles = 1;
123        } elsif ($arg eq "--components") {
124            $has_opt = 1; print join(' ', name_map_entries), "\n";
125        } elsif ($arg eq "--targets-built") {
126            $has_opt = 1; print join(' ', @TARGETS_BUILT), "\n";
127        } elsif ($arg eq "--host-target") {
128            $has_opt = 1; print "$TARGET_TRIPLE\n";
129        } elsif ($arg eq "--build-mode") {
130            $has_opt = 1; print "$LLVM_BUILDMODE\n";
131        } elsif ($arg eq "--obj-root") {
132            $has_opt = 1; print abs_path("$LLVM_OBJ_ROOT/");
133        } elsif ($arg eq "--src-root") {
134            $has_opt = 1; print abs_path("$LLVM_SRC_ROOT/");
135        } else {
136            usage();
137        }
138    } else {
139        push @components, $arg;
140    }
141}
142
143# If no options were specified, fail.
144usage unless $has_opt;
145
146# If no components were specified, default to 'all'.
147if (@components == 0) {
148    push @components, 'all';
149}
150
151# Force component names to lower case.
152@components = map lc, @components;
153
154# Handle any arguments which require building our dependency graph.
155if ($want_libs || $want_libnames || $want_libfiles) {
156    my @libs = expand_dependencies(@components);
157    print join(' ', fix_library_names(@libs)), "\n" if ($want_libs);
158    print join(' ',  @libs), "\n" if ($want_libnames);
159    print join(' ', fix_library_files(@libs)), "\n" if ($want_libfiles);
160}
161
162exit 0;
163
164#==========================================================================
165#  Support Routines
166#==========================================================================
167
168sub usage {
169    print STDERR <<__EOD__;
170Usage: llvm-config <OPTION>... [<COMPONENT>...]
171
172Get various configuration information needed to compile programs which use
173LLVM.  Typically called from 'configure' scripts.  Examples:
174  llvm-config --cxxflags
175  llvm-config --ldflags
176  llvm-config --libs engine bcreader scalaropts
177
178Options:
179  --version          Print LLVM version.
180  --prefix           Print the installation prefix.
181  --src-root         Print the source root LLVM was built from.
182  --obj-root         Print the object root used to build LLVM.
183  --bindir           Directory containing LLVM executables.
184  --includedir       Directory containing LLVM headers.
185  --libdir           Directory containing LLVM libraries.
186  --cppflags         C preprocessor flags for files that include LLVM headers.
187  --cflags           C compiler flags for files that include LLVM headers.
188  --cxxflags         C++ compiler flags for files that include LLVM headers.
189  --ldflags          Print Linker flags.
190  --libs             Libraries needed to link against LLVM components.
191  --libnames         Bare library names for in-tree builds.
192  --libfiles         Fully qualified library filenames for makefile depends.
193  --components       List of all possible components.
194  --targets-built    List of all targets currently built.
195  --host-target      Target triple used to configure LLVM.
196  --build-mode       Print build mode of LLVM tree (e.g. Debug or Release).
197Typical components:
198  all                All LLVM libraries (default).
199  backend            Either a native backend or the C backend.
200  engine             Either a native JIT or a bitcode interpreter.
201__EOD__
202    exit(1);
203}
204
205# Use -lfoo instead of libfoo.a whenever possible, and add directories to
206# files which can't be found using -L.
207sub fix_library_names (@) {
208    my @libs = @_;
209    my @result;
210    foreach my $lib (@libs) {
211        # Transform the bare library name appropriately.
212        my ($basename) = ($lib =~ /^lib([^.]*)\.a/);
213        if (defined $basename) {
214            push @result, "-l$basename";
215        } else {
216            push @result, "$LIBDIR/$lib";
217        }
218    }
219    return @result;
220}
221
222# Turn the list of libraries into a list of files.
223sub fix_library_files(@) {
224    my @libs = @_;
225    my @result;
226    foreach my $lib (@libs) {
227        # Transform the bare library name into a filename.
228        push @result, "$LIBDIR/$lib";
229    }
230    return @result;
231}
232
233#==========================================================================
234#  Library Dependency Analysis
235#==========================================================================
236#  Given a few human-readable library names, find all their dependencies
237#  and sort them into an order which the linker will like.  If we packed
238#  our libraries into fewer archives, we could make the linker do much
239#  of this work for us.
240#
241#  Libraries have two different types of names in this code: Human-friendly
242#  "component" names entered on the command-line, and the raw file names
243#  we use internally (and ultimately pass to the linker).
244#
245#  To understand this code, you'll need a working knowledge of Perl 5,
246#  and possibly some quality time with 'man perlref'.
247
248sub load_dependencies;
249sub build_name_map;
250sub have_native_backend;
251sub find_best_engine;
252sub expand_names (@);
253sub find_all_required_sets (@);
254sub find_all_required_sets_helper ($$@);
255
256# Each "set" contains one or more libraries which must be included as a
257# group (due to cyclic dependencies).  Sets are represented as a Perl array
258# reference pointing to a list of internal library names.
259my @SETS;
260
261# Various mapping tables.
262my %LIB_TO_SET_MAP; # Maps internal library names to their sets.
263my %SET_DEPS;       # Maps sets to a list of libraries they depend on.
264my %NAME_MAP;       # Maps human-entered names to internal names.
265
266# Have our dependencies been loaded yet?
267my $DEPENDENCIES_LOADED = 0;
268
269# Given a list of human-friendly component names, translate them into a
270# complete set of linker arguments.
271sub expand_dependencies (@) {
272    my @libs = @_;
273    load_dependencies;
274    my @required_sets = find_all_required_sets(expand_names(@libs));
275    my @sorted_sets = topologically_sort_sets(@required_sets);
276
277    # Expand the library sets into libraries.
278    my @result;
279    foreach my $set (@sorted_sets) { push @result, @{$set}; }
280    return @result;
281}
282
283# Load in the raw dependency data stored at the end of this file.
284sub load_dependencies {
285    return if $DEPENDENCIES_LOADED;
286    $DEPENDENCIES_LOADED = 1;
287    while (<DATA>) {
288        # Parse our line.
289        my ($libs, $deps) = /^\s*([^:]+):\s*(.*)\s*$/;
290        die "Malformed dependency data" unless defined $deps;
291        my @libs = split(' ', $libs);
292        my @deps = split(' ', $deps);
293
294        # Record our dependency data.
295        my $set = \@libs;
296        push @SETS, $set;
297        foreach my $lib (@libs) { $LIB_TO_SET_MAP{$lib} = $set; }
298        $SET_DEPS{$set} = \@deps;
299    }
300    build_name_map;
301}
302
303# Build a map converting human-friendly component names into internal
304# library names.
305sub build_name_map {
306    # Add entries for all the actual libraries.
307    foreach my $set (@SETS) {
308        foreach my $lib (sort @$set) {
309            my $short_name = $lib;
310            $short_name =~ s/^(lib)?LLVM([^.]*)\..*$/$2/;
311            $short_name =~ tr/A-Z/a-z/;
312            $NAME_MAP{$short_name} = [$lib];
313        }
314    }
315
316    # Add target-specific entries
317    foreach my $target (@TARGETS_BUILT) {
318        # FIXME: Temporary, until we don't switch all targets
319        if (defined $NAME_MAP{$target.'asmprinter'}) {
320            $NAME_MAP{$target} = [$target.'info',
321                                  $target.'asmprinter',
322                                  $target.'codegen']
323        } elsif (defined $NAME_MAP{$target.'codegen'}) {
324          $NAME_MAP{$target} = [$target.'info',
325                                $target.'codegen']
326        } else {
327            $NAME_MAP{$target} = [$target.'info',
328                                  $NAME_MAP{$target}[0]]
329        }
330
331        if (defined $NAME_MAP{$target.'asmparser'}) {
332            push @{$NAME_MAP{$target}},$target.'asmparser'
333        }
334
335        if (defined $NAME_MAP{$target.'disassembler'}) {
336            push @{$NAME_MAP{$target}},$target.'disassembler'
337        }
338    }
339
340    # Add virtual entries.
341    $NAME_MAP{'native'}  = have_native_backend() ? [$ARCH] : [];
342    $NAME_MAP{'nativecodegen'} = have_native_backend() ? [$ARCH.'codegen'] : [];
343    $NAME_MAP{'backend'} = have_native_backend() ? ['native'] : ['cbackend'];
344    $NAME_MAP{'engine'}  = find_best_engine;
345    $NAME_MAP{'all'}     = [name_map_entries];   # Must be last.
346}
347
348# Return true if we have a native backend to use.
349sub have_native_backend {
350    my %BUILT;
351    foreach my $target (@TARGETS_BUILT) { $BUILT{$target} = 1; }
352    return defined $NAME_MAP{$ARCH} && defined $BUILT{$ARCH};
353}
354
355# Find a working subclass of ExecutionEngine for this platform.
356sub find_best_engine {
357    if (have_native_backend && $TARGET_HAS_JIT) {
358        return ['jit', 'native'];
359    } else {
360        return ['interpreter'];
361    }
362}
363
364# Get all the human-friendly component names.
365sub name_map_entries {
366    load_dependencies;
367    return sort keys %NAME_MAP;
368}
369
370# Map human-readable names to internal library names.
371sub expand_names (@) {
372    my @names = @_;
373    my @result;
374    foreach my $name (@names) {
375        if (defined $LIB_TO_SET_MAP{$name}) {
376            # We've hit bottom: An actual library name.
377            push @result, $name;
378        } elsif (defined $NAME_MAP{$name}) {
379            # We've found a short name to expand.
380            push @result, expand_names(@{$NAME_MAP{$name}});
381        } else {
382            print STDERR "llvm-config: unknown component name: $name\n";
383            exit(1);
384        }
385    }
386    return @result;
387}
388
389# Given a list of internal library names, return all sets of libraries which
390# will need to be included by the linker (in no particular order).
391sub find_all_required_sets (@) {
392    my @libs = @_;
393    my %sets_added;
394    my @result;
395    find_all_required_sets_helper(\%sets_added, \@result, @libs);
396    return @result;
397}
398
399# Recursive closures are pretty broken in Perl, so we're going to separate
400# this function from find_all_required_sets and pass in the state we need
401# manually, as references.  Yes, this is fairly unpleasant.
402sub find_all_required_sets_helper ($$@) {
403    my ($sets_added, $result, @libs) = @_;
404    foreach my $lib (@libs) {
405        my $set = $LIB_TO_SET_MAP{$lib};
406        next if defined $$sets_added{$set};
407        $$sets_added{$set} = 1;
408        push @$result, $set;
409        find_all_required_sets_helper($sets_added, $result, @{$SET_DEPS{$set}});
410    }
411}
412
413# Print a list of sets, with a label.  Used for debugging.
414sub print_sets ($@) {
415    my ($label, @sets) = @_;
416    my @output;
417    foreach my $set (@sets) { push @output, join(',', @$set); }
418    print "$label: ", join(';', @output), "\n";
419}
420
421# Returns true if $lib is a key in $added.
422sub has_lib_been_added ($$) {
423    my ($added, $lib) = @_;
424    return defined $$added{$LIB_TO_SET_MAP{$lib}};
425}
426
427# Returns true if all the dependencies of $set appear in $added.
428sub have_all_deps_been_added ($$) {
429    my ($added, $set) = @_;
430    #print_sets("  Checking", $set);
431    #print_sets("     Wants", $SET_DEPS{$set});
432    foreach my $lib (@{$SET_DEPS{$set}}) {
433        return 0 unless has_lib_been_added($added, $lib);
434    }
435    return 1;
436}
437
438# Given a list of sets, topologically sort them using dependencies.
439sub topologically_sort_sets (@) {
440    my @sets = @_;
441    my %added;
442    my @result;
443    SCAN: while (@sets) { # We'll delete items from @sets as we go.
444        #print_sets("So far", reverse(@result));
445        #print_sets("Remaining", @sets);
446        for (my $i = 0; $i < @sets; ++$i) {
447            my $set = $sets[$i];
448            if (have_all_deps_been_added(\%added, $set)) {
449                push @result, $set;
450                $added{$set} = 1;
451                #print "Removing $i.\n";
452                splice(@sets, $i, 1);
453                next SCAN; # Restart our scan.
454            }
455        }
456        die "Can't find a library with no dependencies";
457    }
458    return reverse(@result);
459}
460
461# Our library dependency data will be added after the '__END__' token, and will
462# be read through the magic <DATA> filehandle.
463__END__
464