• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1STMicroelectronics STM32 USB HS PHY controller
2
3The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
4switch. It controls PHY configuration and status, and the UTMI+ switch that
5selects either OTG or HOST controller for the second PHY port. It also sets
6PLL configuration.
7
8USBPHYC
9      |_ PLL
10      |
11      |_ PHY port#1 _________________ HOST controller
12      |                    _                 |
13      |                  / 1|________________|
14      |_ PHY port#2 ----|   |________________
15      |                  \_0|                |
16      |_ UTMI switch_______|          OTG controller
17
18
19Phy provider node
20=================
21
22Required properties:
23- compatible: must be "st,stm32mp1-usbphyc"
24- reg: address and length of the usb phy control register set
25- clocks: phandle + clock specifier for the PLL phy clock
26- #address-cells: number of address cells for phys sub-nodes, must be <1>
27- #size-cells: number of size cells for phys sub-nodes, must be <0>
28
29Optional properties:
30- assigned-clocks: phandle + clock specifier for the PLL phy clock
31- assigned-clock-parents: the PLL phy clock parent
32- resets: phandle + reset specifier
33
34Required nodes: one sub-node per port the controller provides.
35
36Phy sub-nodes
37==============
38
39Required properties:
40- reg: phy port index
41- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
42	      see phy-bindings.txt in the same directory.
43- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
44- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
45- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
46  port#1 and must be <1> for PHY port#2, to select USB controller
47
48
49Example:
50		usbphyc: usb-phy@5a006000 {
51			compatible = "st,stm32mp1-usbphyc";
52			reg = <0x5a006000 0x1000>;
53			clocks = <&rcc_clk USBPHY_K>;
54			resets = <&rcc_rst USBPHY_R>;
55			#address-cells = <1>;
56			#size-cells = <0>;
57
58			usbphyc_port0: usb-phy@0 {
59				reg = <0>;
60				phy-supply = <&vdd_usb>;
61				vdda1v1-supply = <&reg11>;
62				vdda1v8-supply = <&reg18>
63				#phy-cells = <0>;
64			};
65
66			usbphyc_port1: usb-phy@1 {
67				reg = <1>;
68				phy-supply = <&vdd_usb>;
69				vdda1v1-supply = <&reg11>;
70				vdda1v8-supply = <&reg18>
71				#phy-cells = <1>;
72			};
73		};
74