1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2009
4 * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
5 */
6
7 #include <common.h>
8 #include <command.h>
9 #include <environment.h>
10 #include <i2c.h>
11 #include <net.h>
12 #include <linux/mtd/st_smi.h>
13 #include <asm/io.h>
14 #include <asm/arch/hardware.h>
15 #include <asm/arch/spr_emi.h>
16 #include <asm/arch/spr_defs.h>
17
18 #define CPU 0
19 #define DDR 1
20 #define SRAM_REL 0xD2801000
21
22 DECLARE_GLOBAL_DATA_PTR;
23
24 #if defined(CONFIG_CMD_NET)
25 static int i2c_read_mac(uchar *buffer);
26 #endif
27
dram_init(void)28 int dram_init(void)
29 {
30 /* Store complete RAM size and return */
31 gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
32
33 return 0;
34 }
35
dram_init_banksize(void)36 int dram_init_banksize(void)
37 {
38 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
39 gd->bd->bi_dram[0].size = gd->ram_size;
40
41 return 0;
42 }
43
board_early_init_f()44 int board_early_init_f()
45 {
46 #if defined(CONFIG_ST_SMI)
47 smi_init();
48 #endif
49 return 0;
50 }
misc_init_r(void)51 int misc_init_r(void)
52 {
53 #if defined(CONFIG_CMD_NET)
54 uchar mac_id[6];
55
56 if (!eth_env_get_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
57 eth_env_set_enetaddr("ethaddr", mac_id);
58 #endif
59 env_set("verify", "n");
60
61 #if defined(CONFIG_SPEAR_USBTTY)
62 env_set("stdin", "usbtty");
63 env_set("stdout", "usbtty");
64 env_set("stderr", "usbtty");
65
66 #ifndef CONFIG_SYS_NO_DCACHE
67 dcache_enable();
68 #endif
69 #endif
70 return 0;
71 }
72
73 #ifdef CONFIG_SPEAR_EMI
74 struct cust_emi_para {
75 unsigned int tap;
76 unsigned int tsdp;
77 unsigned int tdpw;
78 unsigned int tdpr;
79 unsigned int tdcs;
80 };
81
82 /* EMI timing setting of m28w640hc of linux kernel */
83 const struct cust_emi_para emi_timing_m28w640hc = {
84 .tap = 0x10,
85 .tsdp = 0x05,
86 .tdpw = 0x0a,
87 .tdpr = 0x0a,
88 .tdcs = 0x05,
89 };
90
91 /* EMI timing setting of bootrom */
92 const struct cust_emi_para emi_timing_bootrom = {
93 .tap = 0xf,
94 .tsdp = 0x0,
95 .tdpw = 0xff,
96 .tdpr = 0x111,
97 .tdcs = 0x02,
98 };
99
spear_emi_init(void)100 void spear_emi_init(void)
101 {
102 const struct cust_emi_para *p = &emi_timing_m28w640hc;
103 struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
104 unsigned int cs;
105 unsigned int val, tmp;
106
107 val = readl(CONFIG_SPEAR_RASBASE);
108
109 if (val & EMI_ACKMSK)
110 tmp = 0x3f;
111 else
112 tmp = 0x0;
113
114 writel(tmp, &emi_regs_p->ack);
115
116 for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
117 writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
118 writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
119 writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
120 writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
121 writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
122 writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
123 &emi_regs_p->bank_regs[cs].control);
124 }
125 }
126 #endif
127
spear_board_init(ulong mach_type)128 int spear_board_init(ulong mach_type)
129 {
130 gd->bd->bi_arch_number = mach_type;
131
132 /* adress of boot parameters */
133 gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
134
135 #ifdef CONFIG_SPEAR_EMI
136 spear_emi_init();
137 #endif
138 return 0;
139 }
140
141 #if defined(CONFIG_CMD_NET)
i2c_read_mac(uchar * buffer)142 static int i2c_read_mac(uchar *buffer)
143 {
144 u8 buf[2];
145
146 i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
147
148 /* Check if mac in i2c memory is valid */
149 if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
150 /* Valid mac address is saved in i2c eeprom */
151 i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
152 return 0;
153 }
154
155 return -1;
156 }
157
write_mac(uchar * mac)158 static int write_mac(uchar *mac)
159 {
160 u8 buf[2];
161
162 buf[0] = (u8)MAGIC_BYTE0;
163 buf[1] = (u8)MAGIC_BYTE1;
164 i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
165
166 buf[0] = (u8)~MAGIC_BYTE0;
167 buf[1] = (u8)~MAGIC_BYTE1;
168
169 i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
170
171 /* check if valid MAC address is saved in I2C EEPROM or not? */
172 if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
173 i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
174 puts("I2C EEPROM written with mac address \n");
175 return 0;
176 }
177
178 puts("I2C EEPROM writing failed\n");
179 return -1;
180 }
181 #endif
182
do_chip_config(cmd_tbl_t * cmdtp,int flag,int argc,char * const argv[])183 int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
184 {
185 void (*sram_setfreq) (unsigned int, unsigned int);
186 unsigned int frequency;
187 #if defined(CONFIG_CMD_NET)
188 unsigned char mac[6];
189 #endif
190
191 if ((argc > 3) || (argc < 2))
192 return cmd_usage(cmdtp);
193
194 if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
195
196 frequency = simple_strtoul(argv[2], NULL, 0);
197
198 if (frequency > 333) {
199 printf("Frequency is limited to 333MHz\n");
200 return 1;
201 }
202
203 sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
204
205 if (!strcmp(argv[1], "cpufreq")) {
206 sram_setfreq(CPU, frequency);
207 printf("CPU frequency changed to %u\n", frequency);
208 } else {
209 sram_setfreq(DDR, frequency);
210 printf("DDR frequency changed to %u\n", frequency);
211 }
212
213 return 0;
214
215 #if defined(CONFIG_CMD_NET)
216 } else if (!strcmp(argv[1], "ethaddr")) {
217
218 u32 reg;
219 char *e, *s = argv[2];
220 for (reg = 0; reg < 6; ++reg) {
221 mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
222 if (s)
223 s = (*e) ? e + 1 : e;
224 }
225 write_mac(mac);
226
227 return 0;
228 #endif
229 } else if (!strcmp(argv[1], "print")) {
230 #if defined(CONFIG_CMD_NET)
231 if (!i2c_read_mac(mac)) {
232 printf("Ethaddr (from i2c mem) = %pM\n", mac);
233 } else {
234 printf("Ethaddr (from i2c mem) = Not set\n");
235 }
236 #endif
237 return 0;
238 }
239
240 return cmd_usage(cmdtp);
241 }
242
243 U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
244 "configure chip",
245 "chip_config cpufreq/ddrfreq frequency\n"
246 #if defined(CONFIG_CMD_NET)
247 "chip_config ethaddr XX:XX:XX:XX:XX:XX\n"
248 #endif
249 "chip_config print");
250