1// SPDX-License-Identifier: GPL-2.0 2/ { 3 mbus@f1000000 { 4 pciec: pcie@82000000 { 5 compatible = "marvell,kirkwood-pcie"; 6 status = "disabled"; 7 device_type = "pci"; 8 9 #address-cells = <3>; 10 #size-cells = <2>; 11 12 bus-range = <0x00 0xff>; 13 14 ranges = 15 <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 16 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 17 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; 18 19 pcie0: pcie@1,0 { 20 device_type = "pci"; 21 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; 22 reg = <0x0800 0 0 0 0>; 23 #address-cells = <3>; 24 #size-cells = <2>; 25 #interrupt-cells = <1>; 26 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 27 0x81000000 0 0 0x81000000 0x1 0 1 0>; 28 bus-range = <0x00 0xff>; 29 interrupt-map-mask = <0 0 0 0>; 30 interrupt-map = <0 0 0 0 &intc 9>; 31 marvell,pcie-port = <0>; 32 marvell,pcie-lane = <0>; 33 clocks = <&gate_clk 2>; 34 status = "disabled"; 35 }; 36 }; 37 }; 38 39 ocp@f1000000 { 40 pinctrl: pin-controller@10000 { 41 compatible = "marvell,98dx4122-pinctrl"; 42 43 }; 44 }; 45}; 46 47&sata_phy0 { 48 status = "disabled"; 49}; 50 51&sata_phy1 { 52 status = "disabled"; 53}; 54