1/* 2 * Copyright 2015 Gábor Nyers 3 * 4 * Gábor Nyers <gabor.nyers@gmail.com> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45/dts-v1/; 46#include "sun4i-a10.dtsi" 47#include "sunxi-common-regulators.dtsi" 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/pinctrl/sun4i-a10.h> 51 52/ { 53 model = "Jesurun Q5"; 54 compatible = "jesurun,q5", "allwinner,sun4i-a10"; 55 56 aliases { 57 serial0 = &uart0; 58 }; 59 60 chosen { 61 stdout-path = "serial0:115200n8"; 62 }; 63 64 leds { 65 compatible = "gpio-leds"; 66 pinctrl-names = "default"; 67 pinctrl-0 = <&led_pins_q5>; 68 69 green { 70 label = "q5:green:usr"; 71 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ 72 }; 73 74 }; 75 76 reg_emac_3v3: emac-3v3 { 77 compatible = "regulator-fixed"; 78 pinctrl-names = "default"; 79 pinctrl-0 = <&emac_power_pin_q5>; 80 regulator-name = "emac-3v3"; 81 regulator-min-microvolt = <3300000>; 82 regulator-max-microvolt = <3300000>; 83 startup-delay-us = <20000>; 84 enable-active-high; 85 gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ 86 }; 87}; 88 89&ahci { 90 status = "okay"; 91}; 92 93&ehci0 { 94 status = "okay"; 95}; 96 97&ehci1 { 98 status = "okay"; 99}; 100 101&emac { 102 pinctrl-names = "default"; 103 pinctrl-0 = <&emac_pins_a>; 104 phy = <&phy1>; 105 status = "okay"; 106}; 107 108&emac_sram { 109 status = "okay"; 110}; 111 112&i2c0 { 113 pinctrl-names = "default"; 114 pinctrl-0 = <&i2c0_pins_a>; 115 status = "okay"; 116 117 axp209: pmic@34 { 118 compatible = "x-powers,axp209"; 119 reg = <0x34>; 120 interrupts = <0>; 121 122 interrupt-controller; 123 #interrupt-cells = <1>; 124 }; 125}; 126 127&ir0 { 128 pinctrl-names = "default"; 129 pinctrl-0 = <&ir0_rx_pins_a>; 130 status = "okay"; 131}; 132 133&mdio { 134 phy-supply = <®_emac_3v3>; 135 status = "okay"; 136 137 phy1: ethernet-phy@1 { 138 reg = <1>; 139 }; 140}; 141 142&mmc0 { 143 pinctrl-names = "default"; 144 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; 145 vmmc-supply = <®_vcc3v3>; 146 bus-width = <4>; 147 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ 148 cd-inverted; 149 status = "okay"; 150}; 151 152&ohci0 { 153 status = "okay"; 154}; 155 156&ohci1 { 157 status = "okay"; 158}; 159 160&otg_sram { 161 status = "okay"; 162}; 163 164&pio { 165 emac_power_pin_q5: emac_power_pin@0 { 166 allwinner,pins = "PH19"; 167 allwinner,function = "gpio_out"; 168 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 169 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 170 }; 171 172 led_pins_q5: led_pins@0 { 173 allwinner,pins = "PH20"; 174 allwinner,function = "gpio_out"; 175 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 176 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 177 }; 178}; 179 180®_usb0_vbus { 181 regulator-boot-on; 182 status = "okay"; 183}; 184 185®_usb1_vbus { 186 status = "okay"; 187}; 188 189®_usb2_vbus { 190 status = "okay"; 191}; 192 193&uart0 { 194 pinctrl-names = "default"; 195 pinctrl-0 = <&uart0_pins_a>; 196 status = "okay"; 197}; 198 199&usb_otg { 200 dr_mode = "host"; 201 status = "okay"; 202}; 203 204&usbphy { 205 usb0_vbus-supply = <®_usb0_vbus>; 206 usb1_vbus-supply = <®_usb1_vbus>; 207 usb2_vbus-supply = <®_usb2_vbus>; 208 status = "okay"; 209}; 210