• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
49#include <dt-bindings/interrupt-controller/irq.h>
50
51/ {
52	model = "Wits Pro A20 DKT";
53	compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
54
55	aliases {
56		serial0 = &uart0;
57	};
58
59	chosen {
60		stdout-path = "serial0:115200n8";
61	};
62
63	mmc3_pwrseq: mmc3_pwrseq {
64		compatible = "mmc-pwrseq-simple";
65		pinctrl-names = "default";
66		pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
67		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
68	};
69};
70
71&cpu0 {
72	cpu-supply = <&reg_dcdc2>;
73};
74
75&ehci0 {
76	status = "okay";
77};
78
79&ehci1 {
80	status = "okay";
81};
82
83&gmac {
84	pinctrl-names = "default";
85	pinctrl-0 = <&gmac_pins_rgmii_a>;
86	phy = <&phy1>;
87	phy-mode = "rgmii";
88	status = "okay";
89
90	phy1: ethernet-phy@1 {
91		reg = <1>;
92	};
93};
94
95&i2c0 {
96	pinctrl-names = "default";
97	pinctrl-0 = <&i2c0_pins_a>;
98	status = "okay";
99
100	axp209: pmic@34 {
101		reg = <0x34>;
102		interrupt-parent = <&nmi_intc>;
103		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
104	};
105};
106
107&i2c1 {
108	pinctrl-names = "default";
109	pinctrl-0 = <&i2c1_pins_a>;
110	status = "okay";
111};
112
113&i2c2 {
114	pinctrl-names = "default";
115	pinctrl-0 = <&i2c2_pins_a>;
116	status = "okay";
117};
118
119#include "axp209.dtsi"
120
121&mmc0 {
122	pinctrl-names = "default";
123	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
124	vmmc-supply = <&reg_vcc3v3>;
125	bus-width = <4>;
126	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
127	cd-inverted;
128	status = "okay";
129};
130
131&mmc3 {
132	pinctrl-names = "default";
133	pinctrl-0 = <&mmc3_pins_a>;
134	vmmc-supply = <&reg_vcc3v3>;
135	mmc-pwrseq = <&mmc3_pwrseq>;
136	bus-width = <4>;
137	non-removable;
138	status = "okay";
139
140	brcmf: bcrmf@1 {
141		reg = <1>;
142		compatible = "brcm,bcm4329-fmac";
143		interrupt-parent = <&pio>;
144		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
145		interrupt-names = "host-wake";
146	};
147};
148
149&ohci0 {
150	status = "okay";
151};
152
153&ohci1 {
154	status = "okay";
155};
156
157&otg_sram {
158	status = "okay";
159};
160
161&pio {
162	vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
163		allwinner,pins = "PH9";
164		allwinner,function = "gpio_out";
165		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
166		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
167	};
168
169	usb0_id_detect_pin: usb0_id_detect_pin@0 {
170		allwinner,pins = "PH4";
171		allwinner,function = "gpio_in";
172		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
173		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
174	};
175};
176
177&reg_dcdc2 {
178	regulator-always-on;
179	regulator-min-microvolt = <1000000>;
180	regulator-max-microvolt = <1450000>;
181	regulator-name = "vdd-cpu";
182};
183
184&reg_dcdc3 {
185	regulator-always-on;
186	regulator-min-microvolt = <1000000>;
187	regulator-max-microvolt = <1400000>;
188	regulator-name = "vdd-int-dll";
189};
190
191&reg_ldo1 {
192	regulator-name = "vdd-rtc";
193};
194
195&reg_ldo2 {
196	regulator-always-on;
197	regulator-min-microvolt = <3000000>;
198	regulator-max-microvolt = <3000000>;
199	regulator-name = "avcc";
200};
201
202&reg_usb0_vbus {
203	status = "okay";
204};
205
206&reg_usb1_vbus {
207	status = "okay";
208};
209
210&reg_usb2_vbus {
211	status = "okay";
212};
213
214&uart0 {
215	pinctrl-names = "default";
216	pinctrl-0 = <&uart0_pins_a>;
217	status = "okay";
218};
219
220&usb_otg {
221	dr_mode = "otg";
222	status = "okay";
223};
224
225&usb_power_supply {
226	status = "okay";
227};
228
229&usbphy {
230	pinctrl-names = "default";
231	pinctrl-0 = <&usb0_id_detect_pin>;
232	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
233	usb0_vbus_power-supply = <&usb_power_supply>;
234	usb0_vbus-supply = <&reg_usb0_vbus>;
235	usb1_vbus-supply = <&reg_usb1_vbus>;
236	usb2_vbus-supply = <&reg_usb2_vbus>;
237	status = "okay";
238};
239