1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
4 */
5 #include <common.h>
6 #include <clk.h>
7 #include <dm.h>
8 #include <ram.h>
9 #include <syscon.h>
10 #include <asm/io.h>
11 #include <asm/arch/clock.h>
12 #include <asm/arch/periph.h>
13 #include <asm/arch/grf_rk322x.h>
14 #include <asm/arch/boot_mode.h>
15
16 DECLARE_GLOBAL_DATA_PTR;
17
rk_board_late_init(void)18 __weak int rk_board_late_init(void)
19 {
20 return 0;
21 }
22
board_late_init(void)23 int board_late_init(void)
24 {
25 setup_boot_mode();
26
27 return rk_board_late_init();
28 }
29
board_init(void)30 int board_init(void)
31 {
32 #include <asm/arch/grf_rk322x.h>
33 /* Enable early UART2 channel 1 on the RK322x */
34 #define GRF_BASE 0x11000000
35 struct rk322x_grf * const grf = (void *)GRF_BASE;
36 enum {
37 GPIO1B2_SHIFT = 4,
38 GPIO1B2_MASK = 3 << GPIO1B2_SHIFT,
39 GPIO1B2_GPIO = 0,
40 GPIO1B2_UART21_SIN,
41
42 GPIO1B1_SHIFT = 2,
43 GPIO1B1_MASK = 3 << GPIO1B1_SHIFT,
44 GPIO1B1_GPIO = 0,
45 GPIO1B1_UART1_SOUT,
46 GPIO1B1_UART21_SOUT,
47 };
48 enum {
49 CON_IOMUX_UART2SEL_SHIFT= 8,
50 CON_IOMUX_UART2SEL_MASK = 1 << CON_IOMUX_UART2SEL_SHIFT,
51 CON_IOMUX_UART2SEL_2 = 0,
52 CON_IOMUX_UART2SEL_21,
53 };
54
55 rk_clrsetreg(&grf->gpio1b_iomux,
56 GPIO1B1_MASK | GPIO1B2_MASK,
57 GPIO1B2_UART21_SIN << GPIO1B2_SHIFT |
58 GPIO1B1_UART21_SOUT << GPIO1B1_SHIFT);
59 /* Set channel C as UART2 input */
60 rk_clrsetreg(&grf->con_iomux,
61 CON_IOMUX_UART2SEL_MASK,
62 CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT);
63
64 /*
65 * The integrated macphy is enabled by default, disable it
66 * for saving power consuming.
67 */
68 rk_clrsetreg(&grf->macphy_con[0],
69 MACPHY_CFG_ENABLE_MASK,
70 0 << MACPHY_CFG_ENABLE_SHIFT);
71
72 return 0;
73 }
74
dram_init_banksize(void)75 int dram_init_banksize(void)
76 {
77 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
78 gd->bd->bi_dram[0].size = 0x8400000;
79 /* Reserve 0x200000 for OPTEE */
80 gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE
81 + gd->bd->bi_dram[0].size + 0x200000;
82 gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start
83 + gd->ram_size - gd->bd->bi_dram[1].start;
84
85 return 0;
86 }
87
88 #ifndef CONFIG_SYS_DCACHE_OFF
enable_caches(void)89 void enable_caches(void)
90 {
91 /* Enable D-cache. I-cache is already enabled in start.S */
92 dcache_enable();
93 }
94 #endif
95
96 #if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
97 #include <usb.h>
98 #include <usb/dwc2_udc.h>
99
100 static struct dwc2_plat_otg_data rk322x_otg_data = {
101 .rx_fifo_sz = 512,
102 .np_tx_fifo_sz = 16,
103 .tx_fifo_sz = 128,
104 };
105
board_usb_init(int index,enum usb_init_type init)106 int board_usb_init(int index, enum usb_init_type init)
107 {
108 int node;
109 const char *mode;
110 bool matched = false;
111 const void *blob = gd->fdt_blob;
112
113 /* find the usb_otg node */
114 node = fdt_node_offset_by_compatible(blob, -1,
115 "rockchip,rk3288-usb");
116
117 while (node > 0) {
118 mode = fdt_getprop(blob, node, "dr_mode", NULL);
119 if (mode && strcmp(mode, "otg") == 0) {
120 matched = true;
121 break;
122 }
123
124 node = fdt_node_offset_by_compatible(blob, node,
125 "rockchip,rk3288-usb");
126 }
127 if (!matched) {
128 debug("Not found usb_otg device\n");
129 return -ENODEV;
130 }
131 rk322x_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
132
133 return dwc2_udc_probe(&rk322x_otg_data);
134 }
135
board_usb_cleanup(int index,enum usb_init_type init)136 int board_usb_cleanup(int index, enum usb_init_type init)
137 {
138 return 0;
139 }
140 #endif
141
142 #if CONFIG_IS_ENABLED(FASTBOOT)
fastboot_set_reboot_flag(void)143 int fastboot_set_reboot_flag(void)
144 {
145 struct rk322x_grf *grf;
146
147 printf("Setting reboot to fastboot flag ...\n");
148 grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
149 /* Set boot mode to fastboot */
150 writel(BOOT_FASTBOOT, &grf->os_reg[0]);
151
152 return 0;
153 }
154 #endif
155