1* Nios II Processor Binding 2 3This binding specifies what properties available in the device tree 4representation of a Nios II Processor Core. 5 6Users can use sopc2dts tool for generating device tree sources (dts) from a 7Qsys system. See more detail in: http://www.alterawiki.com/wiki/Sopc2dts 8 9Required properties: 10 11- compatible: Compatible property value should be "altr,nios2-1.0" or 12 "altr,nios2-1.1". 13- reg: Contains CPU index. 14- clock-frequency: Contains the clock frequency for CPU, in Hz. 15- dcache-line-size: Contains data cache line size. 16- icache-line-size: Contains instruction line size. 17- dcache-size: Contains data cache size. 18- icache-size: Contains instruction cache size. 19- altr,reset-addr: Specifies CPU reset address 20- altr,exception-addr: Specifies CPU exception address 21 22Optional properties: 23- altr,has-initda: Specifies CPU support initda instruction, should be 1. 24- altr,has-mmu: Specifies CPU support MMU support. 25- altr,has-mul: Specifies CPU hardware multipy support. 26- altr,has-div: Specifies CPU hardware divide support 27- altr,implementation: Nios II core implementation, this should be "fast"; 28 29Example: 30 31cpu@0x0 { 32 device_type = "cpu"; 33 compatible = "altr,nios2-1.0"; 34 reg = <0>; 35 interrupt-controller; 36 #interrupt-cells = <1>; 37 clock-frequency = <125000000>; 38 dcache-line-size = <32>; 39 icache-line-size = <32>; 40 dcache-size = <32768>; 41 icache-size = <32768>; 42 altr,implementation = "fast"; 43 altr,pid-num-bits = <8>; 44 altr,tlb-num-ways = <16>; 45 altr,tlb-num-entries = <128>; 46 altr,tlb-ptr-sz = <7>; 47 altr,has-div = <1>; 48 altr,has-mul = <1>; 49 altr,reset-addr = <0xc2800000>; 50 altr,fast-tlb-miss-addr = <0xc7fff400>; 51 altr,exception-addr = <0xd0000020>; 52 altr,has-initda = <1>; 53 altr,has-mmu = <1>; 54}; 55