1ARC Timer 2 3Required properties: 4 5- compatible : should be "snps,arc-timer". 6- reg : Specifies timer ID, could be either 0 or 1. 7- clocks : Specifies clocks that drives the counter. 8 9Examples: 10 11timer@0 { 12 compatible = "snps,arc-timer"; 13 clocks = <&core_clk>; 14 reg = <0>; 15}; 16 17timer@1 { 18 compatible = "snps,arc-timer"; 19 clocks = <&core_clk>; 20 reg = <1>; 21}; 22 23NOTE: if you specify both timers, clocks always should be the same 24as each timer is driven by the same core clock. 25