1/* 2 * Automatic software update for U-Boot 3 * Make sure the flashing addresses ('load' prop) is correct for your board! 4 */ 5 6/dts-v1/; 7 8/ { 9 description = "Automatic U-Boot update"; 10 #address-cells = <1>; 11 12 images { 13 update-1 { 14 description = "U-Boot binary"; 15 data = /incbin/("./u-boot.bin"); 16 compression = "none"; 17 type = "firmware"; 18 load = <FFFC0000>; 19 hash-1 { 20 algo = "sha1"; 21 }; 22 }; 23 }; 24}; 25