1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2003 4 * Texas Instruments. 5 * Kshitij Gupta <kshitij@ti.com> 6 * Configuation settings for the TI OMAP Innovator board. 7 * 8 * (C) Copyright 2004 9 * ARM Ltd. 10 * Philippe Robin, <philippe.robin@arm.com> 11 * Configuration for Compact Integrator board. 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include "integrator-common.h" 18 19 /* Integrator CP-specific configuration */ 20 #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ 21 22 /* 23 * Hardware drivers 24 */ 25 #define CONFIG_SMC91111 26 #define CONFIG_SMC_USE_32_BIT 27 #define CONFIG_SMC91111_BASE 0xC8000000 28 #undef CONFIG_SMC91111_EXT_PHY 29 30 /* 31 * Command line configuration. 32 */ 33 #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" 34 #define CONFIG_SERVERIP 192.168.1.100 35 #define CONFIG_IPADDR 192.168.1.104 36 #define CONFIG_BOOTFILE "uImage" 37 38 /* 39 * Miscellaneous configurable options 40 */ 41 #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ 42 #define CONFIG_SYS_MAX_FLASH_SECT 64 43 #define CONFIG_SYS_MONITOR_LEN 0x00100000 44 45 /* 46 * Move up the U-Boot & monitor area if more flash is fitted. 47 * If this U-Boot is to be run on Integrators with varying flash sizes, 48 * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG 49 * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE 50 * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not 51 * embedded in the boot monitor(s) area 52 */ 53 #if ( PHYS_FLASH_SIZE == 0x04000000 ) 54 55 #define CONFIG_ENV_ADDR 0x27F00000 56 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 57 58 #elif (PHYS_FLASH_SIZE == 0x02000000 ) 59 60 #define CONFIG_ENV_ADDR 0x25F00000 61 #define CONFIG_SYS_MONITOR_BASE 0x25F40000 62 63 #else 64 65 #define CONFIG_ENV_ADDR 0x24F00000 66 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 67 68 #endif 69 70 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ 71 #define CONFIG_ENV_SIZE 8192 /* 8KB */ 72 73 #endif /* __CONFIG_H */ 74