• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2008-2011
4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  */
6 
7 #ifndef __CONFIG_KEYMILE_H
8 #define __CONFIG_KEYMILE_H
9 
10 #undef	CONFIG_WATCHDOG		/* disable platform specific watchdog */
11 
12 /*
13  * Miscellaneous configurable options
14  */
15 #if defined(CONFIG_CMD_KGDB)
16 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
17 #else
18 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size  */
19 #endif
20 #define CONFIG_SYS_MAXARGS		32 /* max number of command args */
21 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
22 
23 #define CONFIG_HUSH_INIT_VAR
24 
25 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
26 
27 #define CONFIG_LOADS_ECHO
28 #define CONFIG_SYS_LOADS_BAUD_CHANGE
29 
30 
31 /* Support the IVM EEprom */
32 #define	CONFIG_SYS_IVM_EEPROM_ADR	0x50
33 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN	0x400
34 #define CONFIG_SYS_IVM_EEPROM_PAGE_LEN	0x100
35 
36 #define	CONFIG_SYS_FLASH_PROTECTION
37 
38 /*
39  * BOOTP options
40  */
41 #define CONFIG_BOOTP_BOOTFILESIZE
42 
43 /* UBI Support for all Keymile boards */
44 #define CONFIG_MTD_PARTITIONS
45 #define CONFIG_MTD_DEVICE
46 #define CONFIG_MTD_CONCAT
47 
48 #ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
49 #define CONFIG_KM_DEF_ENV_BOOTPARAMS \
50 	"actual_bank=0\0"
51 #endif
52 
53 #ifndef CONFIG_KM_DEF_NETDEV
54 #define CONFIG_KM_DEF_NETDEV	\
55 	"netdev=eth0\0"
56 #endif
57 
58 #ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT
59 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT	"ubi0"
60 #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */
61 
62 #ifndef CONFIG_KM_UBI_PART_BOOT_OPTS
63 #define CONFIG_KM_UBI_PART_BOOT_OPTS		""
64 #endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */
65 
66 #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP
67 /* one flash chip only called boot */
68 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
69 # define CONFIG_KM_UBI_LINUX_MTD					\
70 	"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT			\
71 	CONFIG_KM_UBI_PART_BOOT_OPTS
72 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI				\
73 	"ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0"
74 #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */
75 /* two flash chips called boot and app */
76 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
77 /* app:  CONFIG_KM_UBI_PARTITION_NAME_APP */
78 # define CONFIG_KM_UBI_LINUX_MTD					\
79 	"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT			\
80 	CONFIG_KM_UBI_PART_BOOT_OPTS " "				\
81 	"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP
82 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI				\
83 	"ubiattach=if test ${boot_bank} -eq 0; then; "			\
84 	"ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; "	\
85 	"ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
86 #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
87 
88 #ifdef CONFIG_NAND_ECC_BCH
89 #define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
90 #define CONFIG_KM_ECC_MODE    " eccmode=bch"
91 #else
92 #define CONFIG_KM_UIMAGE_NAME "uImage\0"
93 #define CONFIG_KM_ECC_MODE
94 #endif
95 
96 /*
97  * boottargets
98  * - set 'subbootcmds'
99  * - set 'bootcmd' and 'altbootcmd'
100  * available targets:
101  * - 'release': for a standalone system		kernel/rootfs from flash
102  */
103 #define CONFIG_KM_DEF_ENV_BOOTTARGETS					\
104 	"subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt "		\
105 		"set_fdthigh cramfsloadkernel flashargs add_default "	\
106 		"addpanic boot\0"					\
107 	"develop="							\
108 		"tftp 200000 scripts/develop-${arch}.txt && "		\
109 		"env import -t 200000 ${filesize} && "			\
110 		"run setup_debug_env\0"					\
111 	"ramfs="							\
112 		"tftp 200000 scripts/ramfs-${arch}.txt && "		\
113 		"env import -t 200000 ${filesize} && "			\
114 		"run setup_debug_env\0"					\
115 	""
116 
117 /*
118  * bootargs
119  * - modify 'bootargs'
120  *
121  * - 'add_default': default bootargs common for all arm/ppc boards
122  * - 'addpanic': add kernel panic options
123  * - 'flashargs': defaults arguments for flash base boot
124  *
125  */
126 #define CONFIG_KM_DEF_ENV_BOOTARGS					\
127 	"add_default="							\
128 		"setenv bootargs ${bootargs} "				\
129 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
130 		":${hostname}:${netdev}:off:"				\
131 		" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}"	\
132 		" mem=${kernelmem} init=${init}"			\
133 		CONFIG_KM_ECC_MODE					\
134 		" phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
135 		" " CONFIG_KM_UBI_LINUX_MTD " "				\
136 		CONFIG_KM_DEF_BOOT_ARGS_CPU				\
137 		"\0"							\
138 	"addpanic="							\
139 		"setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0"	\
140 	"flashargs="							\
141 		"setenv bootargs "					\
142 		"root=mtdblock:rootfs${boot_bank} "			\
143 		"rootfstype=squashfs ro\0"				\
144 	""
145 
146 /*
147  * flash_boot
148  * - commands for booting from flash
149  *
150  * - 'cramfsloadkernel': copy kernel from a cramfs to ram
151  * - 'ubiattach': attach ubi partition
152  * - 'ubicopy': copy ubi volume to ram
153  *              - volume names: bootfs0, bootfs1, bootfs2, ...
154  *
155  * processor specific settings
156  * - 'cramfsloadfdt': copy fdt from a cramfs to ram
157  */
158 #define CONFIG_KM_DEF_ENV_FLASH_BOOT					\
159 	"cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0"		\
160 	"cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0"	\
161 	"ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR)		\
162 			" bootfs${boot_bank}\0"				\
163 	"uimage=" CONFIG_KM_UIMAGE_NAME					\
164 	CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
165 
166 /*
167  * constants
168  * - KM specific constants and commands
169  *
170  * - 'default': setup default environment
171  */
172 #define CONFIG_KM_DEF_ENV_CONSTANTS					\
173 	"backup_bank=0\0"						\
174 	"release=run newenv; reset\0"					\
175 	"pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0"		\
176 	"testbootcmd=setenv boot_bank ${test_bank}; "			\
177 		"run ${subbootcmds}; reset\0"				\
178 	""
179 
180 #ifndef CONFIG_KM_DEF_ENV
181 #define CONFIG_KM_DEF_ENV	\
182 	CONFIG_KM_DEF_ENV_BOOTPARAMS					\
183 	CONFIG_KM_DEF_NETDEV						\
184 	CONFIG_KM_DEF_ENV_CPU						\
185 	CONFIG_KM_DEF_ENV_BOOTTARGETS					\
186 	CONFIG_KM_DEF_ENV_BOOTARGS					\
187 	CONFIG_KM_DEF_ENV_FLASH_BOOT					\
188 	CONFIG_KM_DEF_ENV_CONSTANTS					\
189 	"altbootcmd=run bootcmd\0"					\
190 	"boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"			\
191 	"bootcmd=km_checkbidhwk &&  "					\
192 		"setenv bootcmd \'if km_checktestboot; then; "          \
193 				"setenv boot_bank ${test_bank}; else; " \
194 				"setenv boot_bank ${actual_bank}; fi;"  \
195 			"run ${subbootcmds}; reset\' && "		\
196 		"setenv altbootcmd \'setenv boot_bank ${backup_bank}; "	\
197 			"run ${subbootcmds}; reset\' && "		\
198 		"saveenv && saveenv && boot\0"				\
199 	"bootlimit=3\0"							\
200 	"cramfsloadfdt="						\
201 		"cramfsload ${fdt_addr_r} "				\
202 		"fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"		\
203 	"fdt_addr_r="__stringify(CONFIG_KM_FDT_ADDR) "\0"		\
204 	"init=/sbin/init-overlay.sh\0"					\
205 	"load_addr_r="__stringify(CONFIG_KM_KERNEL_ADDR) "\0"		\
206 	"load=tftpboot ${load_addr_r} ${u-boot}\0"			\
207 	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"					\
208 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"				\
209 	""
210 #endif /* CONFIG_KM_DEF_ENV */
211 
212 #endif /* __CONFIG_KEYMILE_H */
213