1<?xml version="1.0" encoding="utf-8"?> 2<!-- 3/* 4** 5** Copyright 2015 The Android Open Source Project 6** 7** Licensed under the Apache License, Version 2.0 (the "License"); 8** you may not use this file except in compliance with the License. 9** You may obtain a copy of the License at 10** 11** http://www.apache.org/licenses/LICENSE-2.0 12** 13** Unless required by applicable law or agreed to in writing, software 14** distributed under the License is distributed on an "AS IS" BASIS, 15** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 16** See the License for the specific language governing permissions and 17** limitations under the License. 18*/ 19--> 20<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> 21 <!-- Toast message when Wi-Fi cannot scan for networks --> 22 <string name="wifi_fail_to_scan">Can\'t scan for networks</string> 23 <!-- Do not translate. Concise terminology for wifi with WEP security --> 24 <string name="wifi_security_short_wep" translatable="false">WEP</string> 25 <!-- Do not translate. Concise terminology for wifi with WPA security --> 26 <string name="wifi_security_short_wpa" translatable="false">WPA</string> 27 <!-- Do not translate. Concise terminology for wifi with WPA2 security --> 28 <string name="wifi_security_short_wpa2" translatable="false">WPA2</string> 29 <!-- Do not translate. Concise terminology for wifi with both WPA/WPA2 security --> 30 <string name="wifi_security_short_wpa_wpa2" translatable="false">WPA/WPA2</string> 31 <!-- Do not translate. Concise terminology for wifi with unknown PSK type --> 32 <string name="wifi_security_short_psk_generic" translatable="false">@string/wifi_security_short_wpa_wpa2</string> 33 <!-- Do not translate. Concise terminology for wifi with 802.1x EAP security --> 34 <string name="wifi_security_short_eap" translatable="false">802.1x</string> 35 <!-- Do not translate. Concise terminology for wifi with WPA 802.1x EAP security --> 36 <string name="wifi_security_short_eap_wpa" translatable="false">WPA-EAP</string> 37 <!-- Do not translate. Concise terminology for wifi with WPA2/WPA3 802.1x EAP security --> 38 <string name="wifi_security_short_eap_wpa2_wpa3" translatable="false">RSN-EAP</string> 39 <!-- Do not translate. Concise terminology for wifi with WPA3 security --> 40 <string name="wifi_security_short_sae" translatable="false">WPA3</string> 41 <!-- Do not translate. Concise terminology for wifi with WPA2/WPA3 transition security --> 42 <string name="wifi_security_short_psk_sae" translatable="false">WPA2/WPA3</string> 43 <!-- Do not translate. Concise terminology for wifi with OWE security --> 44 <string name="wifi_security_short_owe" translatable="false">OWE</string> 45 <!-- Do not translate. Concise terminology for wifi with 802.1x EAP Suite-B-192 security --> 46 <string name="wifi_security_short_eap_suiteb" translatable="false">Suite-B-192</string> 47 48 <!-- Used in Wi-Fi settings dialogs when Wi-Fi does not have any security. [CHAR LIMIT=40] --> 49 <string name="wifi_security_none">None</string> 50 51 <!-- Do not translate. Terminology for wifi with WEP security --> 52 <string name="wifi_security_wep" translatable="false">WEP</string> 53 <!-- Do not translate. Terminology for wifi with WPA security --> 54 <string name="wifi_security_wpa" translatable="false">WPA-Personal</string> 55 <!-- Do not translate. Terminology for wifi with WPA2 security --> 56 <string name="wifi_security_wpa2" translatable="false">WPA2-Personal</string> 57 <!-- Do not translate. Terminology for wifi with both WPA/WPA2 security, or unknown --> 58 <string name="wifi_security_wpa_wpa2" translatable="false">WPA/WPA2-Personal</string> 59 <!-- Do not translate. Terminology for wifi with unknown PSK type --> 60 <string name="wifi_security_psk_generic" translatable="false">@string/wifi_security_wpa_wpa2</string> 61 <!-- Do not translate. Concise terminology for wifi with 802.1x EAP security --> 62 <string name="wifi_security_eap" translatable="false">WPA/WPA2/WPA3-Enterprise</string> 63 <!-- Do not translate. Concise terminology for wifi with WPA 802.1x EAP security --> 64 <string name="wifi_security_eap_wpa" translatable="false">WPA-Enterprise</string> 65 <!-- Do not translate. Concise terminology for wifi with WPA2/WPA3 802.1x EAP security --> 66 <string name="wifi_security_eap_wpa2_wpa3" translatable="false">WPA2/WPA3-Enterprise</string> 67 <!-- Do not translate. Concise terminology for Passpoint network --> 68 <string name="wifi_security_passpoint" translatable="false">Passpoint</string> 69 <!-- Do not translate. Terminology for wifi with WPA3 security --> 70 <string name="wifi_security_sae" translatable="false">WPA3-Personal</string> 71 <!-- Do not translate. Terminology for wifi with WPA2/WPA3 Transition mode security --> 72 <string name="wifi_security_psk_sae" translatable="false">WPA2/WPA3-Personal</string> 73 <!-- Do not translate. Terminology for wifi with OWE security --> 74 <string name="wifi_security_owe" translatable="false">Enhanced Open</string> 75 <!-- Do not translate. Concise terminology for wifi with 802.1x EAP Suite-B-192 security --> 76 <string name="wifi_security_eap_suiteb" translatable="false">WPA3-Enterprise 192-bit</string> 77 78 <!-- Summary for the remembered network. --> 79 <string name="wifi_remembered">Saved</string> 80 <!-- Summary for the disconnected network. [CHAR LIMIT=40] --> 81 <string name="wifi_disconnected">Disconnected</string> 82 <!-- Status for networks disabled for unknown reason --> 83 <string name="wifi_disabled_generic">Disabled</string> 84 <!-- Status for networked disabled from a DNS or DHCP failure --> 85 <string name="wifi_disabled_network_failure">IP Configuration Failure</string> 86 <!-- Status for networks disabled by the network recommendation provider --> 87 <string name="wifi_disabled_by_recommendation_provider">Not connected due to low quality network</string> 88 <!-- Status for networked disabled from a wifi association failure --> 89 <string name="wifi_disabled_wifi_failure">WiFi Connection Failure</string> 90 <!-- Status for networks disabled from authentication failure (wrong password 91 or certificate). --> 92 <string name="wifi_disabled_password_failure">Authentication problem</string> 93 94 <!-- Status detail for a network that can't be connected to for some reason --> 95 <string name="wifi_cant_connect">Can\'t connect</string> 96 <!-- Status for a named network that can't be connected to for some reason--> 97 <string name="wifi_cant_connect_to_ap">Can\'t connect to \'<xliff:g id="ap_name">%1$s</xliff:g>\'</string> 98 <!-- Message shown when the user likely entered an incorrect password for a wifi network --> 99 <string name="wifi_check_password_try_again">Check password and try again</string> 100 101 <!-- Summary for the remembered network but currently not in range. --> 102 <string name="wifi_not_in_range">Not in range</string> 103 <!-- Summary for the network but no internet connection was detected. --> 104 <string name="wifi_no_internet_no_reconnect">Won\'t automatically connect</string> 105 <!-- Summary for the remembered network but no internet connection was detected. --> 106 <string name="wifi_no_internet">No internet access</string> 107 <!-- Summary for saved networks --> 108 <string name="saved_network">Saved by <xliff:g id="name">%1$s</xliff:g></string> 109 110 <!-- Status message of Wi-Fi when it is automatically connected by a network recommendation provider. [CHAR LIMIT=NONE] --> 111 <string name="connected_via_network_scorer">Automatically connected via %1$s</string> 112 <!-- Status message of Wi-Fi when it is automatically connected by a default network recommendation provider. [CHAR LIMIT=NONE] --> 113 <string name="connected_via_network_scorer_default">Automatically connected via network rating provider</string> 114 <!-- Status message of Wi-Fi when it is connected by Passpoint configuration. [CHAR LIMIT=NONE] --> 115 <string name="connected_via_passpoint">Connected via %1$s</string> 116 <!-- Status message of Wi-Fi when it is connected by a app (via suggestion or network request). [CHAR LIMIT=NONE] --> 117 <string name="connected_via_app">Connected via <xliff:g id="name" example="Wifi App">%1$s</xliff:g></string> 118 <!-- Status message of Wi-Fi when network has matching passpoint credentials. [CHAR LIMIT=NONE] --> 119 <string name="available_via_passpoint">Available via %1$s</string> 120 <!-- Status message of OSU Provider network when not connected. [CHAR LIMIT=NONE] --> 121 <string name="tap_to_sign_up">Tap to sign up</string> 122 <!-- Package name for Settings app--> 123 <string name="settings_package" translatable="false">com.android.settings</string> 124 <!-- Package name for Certinstaller app--> 125 <string name="certinstaller_package" translatable="false">com.android.certinstaller</string> 126 127 <!-- Summary for Connected wifi network without internet --> 128 <string name="wifi_connected_no_internet">Connected, no internet</string> 129 130 <!-- Summary for connected wifi network with partial internet connectivity [CHAR LIMIT=50] --> 131 <string name="wifi_limited_connection">Limited connection</string> 132 133 <!-- Wi-Fi status indicating that the current network is connected, but has no internet access. --> 134 <string name="wifi_status_no_internet">No internet</string> 135 136 <!-- Wi-Fi status indicating that the current network is connected requires sign in to access the internet. --> 137 <string name="wifi_status_sign_in_required">Sign in required</string> 138 139 <!-- Summary for networks failing to connect due to association rejection status 17, AP full --> 140 <string name="wifi_ap_unable_to_handle_new_sta">Access point temporarily full</string> 141 142 <!-- Status message of Wi-Fi when it is connected to a Carrier Network. [CHAR LIMIT=NONE] --> 143 <string name="connected_via_carrier">Connected via %1$s</string> 144 <!-- Status message of Wi-Fi when an available network is a carrier network. [CHAR LIMIT=NONE] --> 145 <string name="available_via_carrier">Available via %1$s</string> 146 147 <!-- Status message of OSU Provider upon initiating provisioning flow [CHAR LIMIT=NONE] --> 148 <string name="osu_opening_provider">Opening <xliff:g id="passpointProvider" example="Passpoint Provider">%1$s</xliff:g></string> 149 <!-- Status message of OSU Provider when connection fails [CHAR LIMIT=NONE] --> 150 <string name="osu_connect_failed">Couldn\u2019t connect</string> 151 <!-- Status message of OSU Provider after user completes provisioning flow [CHAR LIMIT=NONE] --> 152 <string name="osu_completing_sign_up">Completing sign-up\u2026</string> 153 <!-- Status message of OSU Provider when sign up could not be completed [CHAR LIMIT=NONE] --> 154 <string name="osu_sign_up_failed">Couldn\u2019t complete sign-up. Tap to try again.</string> 155 <!-- Status message of OSU Provider on completing provisioning. [CHAR LIMIT=NONE] --> 156 <string name="osu_sign_up_complete">Sign-up complete. Connecting\u2026</string> 157 158 <!-- Speed label for very slow network speed --> 159 <string name="speed_label_very_slow">Very Slow</string> 160 <!-- Speed label for slow network speed --> 161 <string name="speed_label_slow">Slow</string> 162 <!-- Speed label for okay network speed --> 163 <string name="speed_label_okay">OK</string> 164 <!-- Speed label for medium network speed --> 165 <string name="speed_label_medium">Medium</string> 166 <!-- Speed label for fast network speed --> 167 <string name="speed_label_fast">Fast</string> 168 <!-- Speed label for very fast network speed --> 169 <string name="speed_label_very_fast">Very Fast</string> 170 171 <!-- Summary text separator for preferences including a short description (eg. "Fast / Connected"). --> 172 <string name="preference_summary_default_combination"><xliff:g id="state" example="ON">%1$s</xliff:g> / <xliff:g id="description" example="High accuracy mode">%2$s</xliff:g></string> 173 174 <!-- Bluetooth settings. Message when a device is disconnected --> 175 <string name="bluetooth_disconnected">Disconnected</string> 176 <!-- Bluetooth settings. Message when disconnecting from a device --> 177 <string name="bluetooth_disconnecting">Disconnecting\u2026</string> 178 <!-- Bluetooth settings. Message when connecting to a device --> 179 <string name="bluetooth_connecting">Connecting\u2026</string> 180 <!-- Bluetooth settings. Message when connected to a device. [CHAR LIMIT=40] --> 181 <string name="bluetooth_connected">Connected<xliff:g id="active_device">%1$s</xliff:g></string> 182 <!--Bluetooth settings screen, summary text under individual Bluetooth devices when pairing --> 183 <string name="bluetooth_pairing">Pairing\u2026</string> 184 185 <!-- Bluetooth settings. Message when connected to a device, except for phone audio. [CHAR LIMIT=40] --> 186 <string name="bluetooth_connected_no_headset">Connected (no phone)<xliff:g id="active_device">%1$s</xliff:g></string> 187 <!-- Bluetooth settings. Message when connected to a device, except for media audio. [CHAR LIMIT=40] --> 188 <string name="bluetooth_connected_no_a2dp">Connected (no media)<xliff:g id="active_device">%1$s</xliff:g></string> 189 <!-- Bluetooth settings. Message when connected to a device, except for map. [CHAR LIMIT=40] --> 190 <string name="bluetooth_connected_no_map">Connected (no message access)<xliff:g id="active_device">%1$s</xliff:g></string> 191 <!-- Bluetooth settings. Message when connected to a device, except for phone/media audio. [CHAR LIMIT=40] --> 192 <string name="bluetooth_connected_no_headset_no_a2dp">Connected (no phone or media)<xliff:g id="active_device">%1$s</xliff:g></string> 193 194 <!-- Bluetooth settings. Message when connected to a device, showing remote device battery level. [CHAR LIMIT=NONE] --> 195 <string name="bluetooth_connected_battery_level">Connected, battery <xliff:g id="battery_level_as_percentage">%1$s</xliff:g><xliff:g id="active_device">%2$s</xliff:g></string> 196 <!-- Bluetooth settings. Message when connected to a device, except for phone audio, showing remote device battery level. [CHAR LIMIT=NONE] --> 197 <string name="bluetooth_connected_no_headset_battery_level">Connected (no phone), battery <xliff:g id="battery_level_as_percentage">%1$s</xliff:g><xliff:g id="active_device">%2$s</xliff:g></string> 198 <!-- Bluetooth settings. Message when connected to a device, except for media audio, showing remote device battery level. [CHAR LIMIT=NONE] --> 199 <string name="bluetooth_connected_no_a2dp_battery_level">Connected (no media), battery <xliff:g id="battery_level_as_percentage">%1$s</xliff:g><xliff:g id="active_device">%2$s</xliff:g></string> 200 <!-- Bluetooth settings. Message when connected to a device, except for phone/media audio, showing remote device battery level. [CHAR LIMIT=NONE] --> 201 <string name="bluetooth_connected_no_headset_no_a2dp_battery_level">Connected (no phone or media), battery <xliff:g id="battery_level_as_percentage">%1$s</xliff:g><xliff:g id="active_device">%2$s</xliff:g></string> 202 203 <!-- Connected devices settings. Message when Bluetooth is connected and active, showing remote device status and battery level. [CHAR LIMIT=NONE] --> 204 <string name="bluetooth_active_battery_level">Active, <xliff:g id="battery_level_as_percentage">%1$s</xliff:g> battery</string> 205 <!-- Connected devices settings. Message when Bluetooth is connected and active, showing remote device status and battery level for untethered headset. [CHAR LIMIT=NONE] --> 206 <string name="bluetooth_active_battery_level_untethered">Active, L: <xliff:g id="battery_level_as_percentage" example="25%">%1$s</xliff:g> battery, R: <xliff:g id="battery_level_as_percentage" example="25%">%2$s</xliff:g> battery</string> 207 <!-- Connected devices settings. Message when Bluetooth is connected but not in use, showing remote device battery level. [CHAR LIMIT=NONE] --> 208 <string name="bluetooth_battery_level"><xliff:g id="battery_level_as_percentage">%1$s</xliff:g> battery</string> 209 <!-- Connected devices settings. Message when Bluetooth is connected but not in use, showing remote device battery level for untethered headset. [CHAR LIMIT=NONE] --> 210 <string name="bluetooth_battery_level_untethered">L: <xliff:g id="battery_level_as_percentage" example="25%">%1$s</xliff:g> battery, R: <xliff:g id="battery_level_as_percentage" example="25%">%2$s</xliff:g> battery</string> 211 <!-- Connected devices settings. Message when Bluetooth is connected and active but no battery information, showing remote device status. [CHAR LIMIT=NONE] --> 212 <string name="bluetooth_active_no_battery_level">Active</string> 213 214 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the A2DP profile. --> 215 <string name="bluetooth_profile_a2dp">Media audio</string> 216 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the headset or handsfree profile. --> 217 <string name="bluetooth_profile_headset">Phone calls</string> 218 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the OPP profile. --> 219 <string name="bluetooth_profile_opp">File transfer</string> 220 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the HID profile. --> 221 <string name="bluetooth_profile_hid">Input device</string> 222 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the PAN profile (accessing Internet through remote device). [CHAR LIMIT=40] --> 223 <string name="bluetooth_profile_pan">Internet access</string> 224 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the PBAP profile. [CHAR LIMIT=40] --> 225 <string name="bluetooth_profile_pbap">Contact sharing</string> 226 <!-- Bluetooth settings. The user-visible summary string that is used whenever referring to the PBAP profile (sharing contacts). [CHAR LIMIT=60] --> 227 <string name="bluetooth_profile_pbap_summary">Use for contact sharing</string> 228 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the PAN profile (sharing this device's Internet connection). [CHAR LIMIT=40] --> 229 <string name="bluetooth_profile_pan_nap">Internet connection sharing</string> 230 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the map profile. --> 231 <string name="bluetooth_profile_map">Text Messages</string> 232 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the SAP profile (sharing SIM card). --> 233 <string name="bluetooth_profile_sap">SIM Access</string> 234 235 <!-- Bluetooth settings. The user-visible string for the setting controlling whether to use a high-quality codec if the device supports it, along with the name of the codec (eg AAC, LDAC, aptX) --> 236 <string name="bluetooth_profile_a2dp_high_quality">HD audio: <xliff:g id="codec_name">%1$s</xliff:g></string> 237 238 <!-- Bluetooth settings. Similar to bluetooth_profile_a2dp_high_quality, but used when the device supports high quality audio but we don't know which codec that will be used. --> 239 <string name="bluetooth_profile_a2dp_high_quality_unknown_codec">HD audio</string> 240 241 <!-- Bluetooth settings. The user-visible string that is used whenever referring to the Hearing Aid profile. --> 242 <string name="bluetooth_profile_hearing_aid">Hearing Aids</string> 243 <!-- Bluetooth settings. Connection options screen. The summary for the Hearing Aid checkbox preference when Hearing Aid is connected. --> 244 <string name="bluetooth_hearing_aid_profile_summary_connected">Connected to Hearing Aids</string> 245 246 <!-- Bluetooth settings. Connection options screen. The summary for the A2DP checkbox preference when A2DP is connected. --> 247 <string name="bluetooth_a2dp_profile_summary_connected">Connected to media audio</string> 248 <!-- Bluetooth settings. Connection options screen. The summary for the headset checkbox preference when headset is connected. --> 249 <string name="bluetooth_headset_profile_summary_connected">Connected to phone audio</string> 250 <!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference when OPP is connected. --> 251 <string name="bluetooth_opp_profile_summary_connected">Connected to file transfer server</string> 252 <!-- Bluetooth settings. Connection options screen. The summary for the map checkbox preference when map is connected. --> 253 <string name="bluetooth_map_profile_summary_connected">Connected to map</string> 254 <!-- Bluetooth settings. Connection options screen. The summary for the sap checkbox preference when SAP is connected. --> 255 <string name="bluetooth_sap_profile_summary_connected">Connected to SAP</string> 256 <!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference when OPP is not connected. --> 257 <string name="bluetooth_opp_profile_summary_not_connected">Not connected to file transfer server</string> 258 <!-- Bluetooth settings. Connection options screen. The summary for the HID checkbox preference when HID is connected. --> 259 <string name="bluetooth_hid_profile_summary_connected">Connected to input device</string> 260 <!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (user role). [CHAR LIMIT=25]--> 261 <string name="bluetooth_pan_user_profile_summary_connected">Connected to device for internet access</string> 262 <!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (NAP role). [CHAR LIMIT=25]--> 263 <string name="bluetooth_pan_nap_profile_summary_connected">Sharing local internet connection with device</string> 264 265 <!-- Bluetooth settings. Connection options screen. The summary 266 for the PAN checkbox preference that describes how checking it 267 will set the PAN profile as preferred. --> 268 <string name="bluetooth_pan_profile_summary_use_for">Use for internet access</string> 269 <!-- Bluetooth settings. Connection options screen. The summary for the map checkbox preference that describes how checking it will set the map profile as preferred. --> 270 <string name="bluetooth_map_profile_summary_use_for">Use for map</string> 271 <!-- Bluetooth settings. Connection options screen. The summary for the sap checkbox preference that describes how checking it will set the sap profile as preferred. --> 272 <string name="bluetooth_sap_profile_summary_use_for">Use for SIM access</string> 273 <!-- Bluetooth settings. Connection options screen. The summary for the A2DP checkbox preference that describes how checking it will set the A2DP profile as preferred. --> 274 <string name="bluetooth_a2dp_profile_summary_use_for">Use for media audio</string> 275 <!-- Bluetooth settings. Connection options screen. The summary for the headset checkbox preference that describes how checking it will set the headset profile as preferred. --> 276 <string name="bluetooth_headset_profile_summary_use_for">Use for phone audio</string> 277 <!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference that describes how checking it will set the OPP profile as preferred. --> 278 <string name="bluetooth_opp_profile_summary_use_for">Use for file transfer</string> 279 <!-- Bluetooth settings. Connection options screen. The summary 280 for the HID checkbox preference that describes how checking it 281 will set the HID profile as preferred. --> 282 <string name="bluetooth_hid_profile_summary_use_for">Use for input</string> 283 <!-- Bluetooth settings. Connection options screen. The summary for the Hearing Aid checkbox preference that describes how checking it will set the Hearing Aid profile as preferred. --> 284 <string name="bluetooth_hearing_aid_profile_summary_use_for">Use for Hearing Aids</string> 285 286 <!-- Button text for accepting an incoming pairing request. [CHAR LIMIT=20] --> 287 <string name="bluetooth_pairing_accept">Pair</string> 288 <!-- Button text for accepting an incoming pairing request in all caps. [CHAR LIMIT=20] --> 289 <string name="bluetooth_pairing_accept_all_caps">PAIR</string> 290 <!-- Button text for declining an incoming pairing request. [CHAR LIMIT=20] --> 291 <string name="bluetooth_pairing_decline">Cancel</string> 292 293 <!-- Message in pairing dialogs. [CHAR LIMIT=NONE] --> 294 <string name="bluetooth_pairing_will_share_phonebook">Pairing grants access to your contacts and call history when connected.</string> 295 <!-- Message for the error dialog when BT pairing fails generically. --> 296 <string name="bluetooth_pairing_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g>.</string> 297 298 <!-- Message for the error dialog when BT pairing fails because the PIN / 299 Passkey entered is incorrect. --> 300 <string name="bluetooth_pairing_pin_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g> because of an incorrect PIN or passkey.</string> 301 <!-- Message for the error dialog when BT pairing fails because the other device is down. --> 302 <string name="bluetooth_pairing_device_down_error_message">Can\'t communicate with <xliff:g id="device_name">%1$s</xliff:g>.</string> 303 <!-- Message for the error dialog when BT pairing fails because the other device rejected the pairing. --> 304 <string name="bluetooth_pairing_rejected_error_message">Pairing rejected by <xliff:g id="device_name">%1$s</xliff:g>.</string> 305 306 <!-- Message for telling the user the kind of BT device being displayed in list. [CHAR LIMIT=30 BACKUP_MESSAGE_ID=4875089335641234463] --> 307 <string name="bluetooth_talkback_computer">Computer</string> 308 309 <!-- Message for telling the user the kind of BT device being displayed in list. [CHAR LIMIT=30 BACKUP_MESSAGE_ID=5140152177885220949] --> 310 <string name="bluetooth_talkback_headset">Headset</string> 311 312 <!-- Message for telling the user the kind of BT device being displayed in list. [CHAR LIMIT=30 BACKUP_MESSAGE_ID=4260255181240622896] --> 313 <string name="bluetooth_talkback_phone">Phone</string> 314 315 <!-- Message for telling the user the kind of BT device being displayed in list. [CHAR LIMIT=30 BACKUP_MESSAGE_ID=551146170554589119] --> 316 <string name="bluetooth_talkback_imaging">Imaging</string> 317 318 <!-- Message for telling the user the kind of BT device being displayed in list. [CHAR LIMIT=30 BACKUP_MESSAGE_ID=26580326066627664] --> 319 <string name="bluetooth_talkback_headphone">Headphone</string> 320 321 <!-- Message for telling the user the kind of BT device being displayed in list. [CHAR LIMIT=30 BACKUP_MESSAGE_ID=5165842622743212268] --> 322 <string name="bluetooth_talkback_input_peripheral">Input Peripheral</string> 323 324 <!-- Message for telling the user the kind of BT device being displayed in list. [CHAR LIMIT=30 BACKUP_MESSAGE_ID=5615463912185280812] --> 325 <string name="bluetooth_talkback_bluetooth">Bluetooth</string> 326 327 <!-- Message for telling the user the left-side hearing aid device is doing its pairing operation [CHAR LIMIT=NONE] --> 328 <string name="bluetooth_hearingaid_left_pairing_message">Pairing left hearing aid\u2026</string> 329 <!-- Message for telling the user the right-side hearing aid device is doing its pairing operation [CHAR LIMIT=NONE] --> 330 <string name="bluetooth_hearingaid_right_pairing_message">Pairing right hearing aid\u2026</string> 331 <!-- Bluetooth settings. Message when connected to a left-side Hearing Aid device, showing remote device battery level. [CHAR LIMIT=NONE] --> 332 <string name="bluetooth_hearingaid_left_battery_level">Left - <xliff:g id="battery_level_as_percentage">%1$s</xliff:g> battery</string> 333 <!-- Bluetooth settings. Message when connected to a right-side Hearing Aid device, showing remote device battery level. [CHAR LIMIT=NONE] --> 334 <string name="bluetooth_hearingaid_right_battery_level">Right - <xliff:g id="battery_level_as_percentage">%1$s</xliff:g> battery</string> 335 336 <!-- Content description of the WIFI signal when WIFI is disabled for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> 337 <string name="accessibility_wifi_off">Wifi off.</string> 338 <!-- Content description of the WIFI signal when no signal for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> 339 <string name="accessibility_no_wifi">Wifi disconnected.</string> 340 <!-- Content description of the WIFI signal when it is one bar for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> 341 <string name="accessibility_wifi_one_bar">Wifi one bar.</string> 342 <!-- Content description of the WIFI signal when it is two bars for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> 343 <string name="accessibility_wifi_two_bars">Wifi two bars.</string> 344 <!-- Content description of the WIFI signal when it is three bars for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> 345 <string name="accessibility_wifi_three_bars">Wifi three bars.</string> 346 <!-- Content description of the WIFI signal when it is full for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> 347 <string name="accessibility_wifi_signal_full">Wifi signal full.</string> 348 349 <!-- Content description of the Wi-Fi security type. This message indicates this is an open Wi-Fi (no password needed) [CHAR LIMIT=NONE] --> 350 <string name="accessibility_wifi_security_type_none">Open network</string> 351 352 <!-- Content description of the Wi-Fi security type. This message indicates this is a secured Wi-Fi (password needed) [CHAR LIMIT=NONE] --> 353 <string name="accessibility_wifi_security_type_secured">Secure network</string> 354 355 <!-- Label for kernel threads in battery usage --> 356 <string name="process_kernel_label">Android OS</string> 357 <!-- Title of data usage item that represents all uninstalled applications. [CHAR LIMIT=48] --> 358 <string name="data_usage_uninstalled_apps">Removed apps</string> 359 <!-- Title of data usage item that represents all uninstalled applications or removed users. [CHAR LIMIT=48] --> 360 <string name="data_usage_uninstalled_apps_users">Removed apps and users</string> 361 <!-- Title of data usage item that represents system updates (OTAs). [CHAR LIMIT=48] --> 362 <string name="data_usage_ota">System updates</string> 363 364 365 <!-- Tethering controls, item title to go into the tethering settings --> 366 <!-- Tethering controls, item title to go into the tethering settings when only USB tethering is available [CHAR LIMIT=25]--> 367 <string name="tether_settings_title_usb">USB tethering</string> 368 <!-- Tethering controls, item title to go into the tethering settings when only Wifi tethering is available [CHAR LIMIT=25]--> 369 <string name="tether_settings_title_wifi">Portable hotspot</string> 370 <!-- Tethering controls, item title to go into the tethering settings when only Bluetooth tethering is available [CHAR LIMIT=25]--> 371 <string name="tether_settings_title_bluetooth">Bluetooth tethering</string> 372 <!-- Tethering controls, item title to go into the tethering settings when USB and Bluetooth tethering are available [CHAR LIMIT=25]--> 373 <string name="tether_settings_title_usb_bluetooth">Tethering</string> 374 <!-- Tethering controls, item title to go into the tethering settings when USB, Bluetooth and Wifi tethering are available [CHAR LIMIT=25]--> 375 <string name="tether_settings_title_all">Tethering & portable hotspot</string> 376 377 <!-- Title for a work profile. [CHAR LIMIT=25] --> 378 <string name="managed_user_title">All work apps</string> 379 380 <!-- Title for Guest user [CHAR LIMIT=35] --> 381 <string name="user_guest">Guest</string> 382 383 <!-- Manage apps, individual app screen, substituted for the application's label when the app's label CAN NOT be determined.--> 384 <string name="unknown">Unknown</string> 385 386 <!-- [CHAR LIMIT=NONE] Label of a running process that represents another user --> 387 <string name="running_process_item_user_label">User: <xliff:g id="user_name">%1$s</xliff:g></string> 388 389 <!-- Launch defaults preference summary with some set [CHAR LIMIT=40] --> 390 <string name="launch_defaults_some">Some defaults set</string> 391 <!-- Launch defaults preference summary with none set [CHAR LIMIT=40] --> 392 <string name="launch_defaults_none">No defaults set</string> 393 <!-- DO NOT TRANSLATE Empty summary for dynamic preferences --> 394 <string name="summary_empty" translatable="false"></string> 395 <!-- Text-To-Speech (TTS) settings --><skip /> 396 <!-- Name of the TTS package as listed by the package manager. --> 397 <string name="tts_settings">Text-to-speech settings</string> 398 <!-- TTS option item name in the main settings screen --> 399 <string name="tts_settings_title">Text-to-speech output</string> 400 <!-- On main TTS Settings screen, in default settings section, setting default speech rate for synthesized voice --> 401 <string name="tts_default_rate_title">Speech rate</string> 402 <!-- On main TTS Settings screen, summary for default speech rate for synthesized voice --> 403 <string name="tts_default_rate_summary">Speed at which the text is spoken</string> 404 <!-- On main TTS Settings screen, in default settings section, setting default pitch for synthesized voice --> 405 <string name="tts_default_pitch_title">Pitch</string> 406 <!-- On main TTS Settings screen, summary for default pitch for synthesized voice --> 407 <string name="tts_default_pitch_summary">Affects the tone of the synthesized speech</string> 408 <!-- On main TTS Settings screen, in default settings section, setting default language for synthesized voice --> 409 <string name="tts_default_lang_title">Language</string> 410 <!-- Entry in the TTS engine language/locale picker, when selected will try to default to the system language [CHAR LIMIT=50] --> 411 <string name="tts_lang_use_system">Use system language</string> 412 <!-- On main TTS Settings screen, language summary if it can't default to system language [CHAR LIMIT=50] --> 413 <string name="tts_lang_not_selected">Language not selected</string> 414 <!-- On main TTS Settings screen, summary for default language for synthesized voice --> 415 <string name="tts_default_lang_summary">Sets the language-specific voice for the spoken text</string> 416 <!-- On main TTS Settings screen, triggers playback of an example of speech synthesis --> 417 <string name="tts_play_example_title">Listen to an example</string> 418 <!-- On main TTS Settings screen, summary for triggering playback of an example of speech synthesis --> 419 <string name="tts_play_example_summary">Play a short demonstration of speech synthesis</string> 420 <!-- On main TTS Settings screen, click to install required speech synthesis data --> 421 <string name="tts_install_data_title">Install voice data</string> 422 <!-- On main TTS Settings screen, summary for click to install required speech synthesis data --> 423 <string name="tts_install_data_summary">Install the voice data required for speech synthesis</string> 424 <!-- Warning message about security implications of enabling a TTS engine, displayed as a dialog 425 message when the user selects to enable an engine. --> 426 <string name="tts_engine_security_warning">This speech synthesis engine may be able to collect 427 all the text that will be spoken, including personal data like passwords and credit 428 card numbers. It comes from the <xliff:g id="tts_plugin_engine_name">%s</xliff:g> engine. 429 Enable the use of this speech synthesis engine?</string> 430 <!-- Warning message about required internet conectivity for TTS synthesis, displayed as a dialog 431 message when the user selects to play an example for network only locale and there's no internet connectivity. --> 432 <string name="tts_engine_network_required">This language requires a working network connection for text-to-speech output.</string> 433 <!-- Text spoken by the TTS engine as an example if the engine doesn't provide sample text [CHAR LIMIT=100] --> 434 <string name="tts_default_sample_string">This is an example of speech synthesis</string> 435 <!-- On main TTS Settings screen, title of a field explaining current TTS engine status for 436 current default language [CHAR LIMIT=50] --> 437 <string name="tts_status_title">Default language status</string> 438 <!-- On main TTS Settings screen, current TTS engine status for the current default language, 439 selected language is fully supported by the engine [CHAR LIMIT=150]--> 440 <string name="tts_status_ok"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> is fully supported</string> 441 <!-- On main TTS Settings screen, current TTS engine status for the current default language, 442 selected language is supported by the engine only if there's a working network connection [CHAR LIMIT=150] --> 443 <string name="tts_status_requires_network"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> requires network connection</string> 444 <!-- On main TTS Settings screen, current TTS engine status for the current default language, 445 selected language is not supported by the engine [CHAR LIMIT=150] --> 446 <string name="tts_status_not_supported"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> is not supported</string> 447 <!-- On main TTS Settings screen, current TTS engine status for the current default language, 448 tts engine is queried for status [CHAR LIMIT=150] --> 449 <string name="tts_status_checking">Checking…</string> 450 <!-- Title for a preference in the main TTS settings screen, which 451 launches the settings screen for a given TTS engine when clicked 452 [CHAR LIMIT=30]--> 453 <string name="tts_engine_settings_title">Settings for <xliff:g id="tts_engine_name">%s</xliff:g></string> 454 <!-- [CHAR LIMIT=150] Text for screen readers / accessibility programs for 455 the image that launches the TTS engine settings when clicked. --> 456 <string name="tts_engine_settings_button">Launch engine settings</string> 457 <!-- [CHAR LIMIT=50] The text for the settings section that users to set a 458 preferred text to speech engine --> 459 <string name="tts_engine_preference_section_title">Preferred engine</string> 460 <!-- [CHAR LIMIT=50] Title of the settings section that displays general preferences 461 that are applicable to all engines, such as the speech rate --> 462 <string name="tts_general_section_title">General</string> 463 <!-- On main TTS Settings screen, in default settings section, 464 reset speech pitch of synthesized voice to 1x speech pitch. [CHAR LIMIT=50] --> 465 <string name="tts_reset_speech_pitch_title">Reset speech pitch</string> 466 <!--On main TTS Settings screen, summary for reset speech pitch of synthesized voice [CHAR LIMIT=150] --> 467 <string name="tts_reset_speech_pitch_summary">Reset the pitch at which the text is spoken to default.</string> 468 469 <!-- Default speech rate choices --> 470 <string-array name="tts_rate_entries"> 471 <item>Very slow</item> 472 <item>Slow</item> 473 <item>Normal</item> 474 <item>Fast</item> 475 <item>Faster</item> 476 <item>Very fast</item> 477 <item>Rapid</item> 478 <item>Very rapid</item> 479 <item>Fastest</item> 480 </string-array> 481 <!-- Do not translate. --> 482 <string-array name="tts_rate_values"> 483 <item>60</item> 484 <item>80</item> 485 <item>100</item> 486 <item>150</item> 487 <item>200</item> 488 <item>250</item> 489 <item>300</item> 490 <item>350</item> 491 <item>400</item> 492 </string-array> 493 494 <!-- Do not translate. --> 495 <string-array name="tts_demo_strings" translatable="false"> 496 <item>This is an example of speech synthesis in English.</item> 497 <item>Voici un échantillon de synthèse vocale en français.</item> 498 <item>Dies ist ein Beispiel für Sprachsynthese in Deutsch.</item> 499 <item>Questo è un esempio di sintesi vocale in italiano.</item> 500 <item>Este es un ejemplo de síntesis de voz en español.</item> 501 <item>이것은 한국어 음성 합성의 예입니다.</item> 502 </string-array> 503 <!-- Do not translate. --> 504 <string-array name="tts_demo_string_langs" translatable="false"> 505 <item>eng</item> 506 <item>fra</item> 507 <item>deu</item> 508 <item>ita</item> 509 <item>spa</item> 510 <item>kor</item> 511 </string-array> 512 513 <!-- Title for profile selection dialog [CHAR LIMIT=30] --> 514 <string name="choose_profile">Choose profile</string> 515 516 <!-- Header for items under the personal user [CHAR LIMIT=30] --> 517 <string name="category_personal">Personal</string> 518 <!-- Header for items under the work user [CHAR LIMIT=30] --> 519 <string name="category_work">Work</string> 520 521 <!-- Full package name of OEM preferred device feedback reporter. Leave this blank, overlaid in Settings/TvSettings [DO NOT TRANSLATE] --> 522 <string name="oem_preferred_feedback_reporter" translatable="false" /> 523 524 <!-- Development settings --> 525 <skip/> 526 <!-- Development Settings. the title for the item to take the user to Development settings. Development settings are settings meant for application developers. --> 527 <string name="development_settings_title">Developer options</string> 528 <!-- Development settings enable title. --> 529 <string name="development_settings_enable">Enable developer options</string> 530 <!-- Development Settings summary. The summary of the item to take the user to Development settings. Development settings are settings meant for application developers. --> 531 <string name="development_settings_summary">Set options for app development</string> 532 <!-- Setting checkbox title for Whether to enable USB debugging support on the phone. --> 533 <!-- Error message for users that aren't allowed to modify developer options [CHAR LIMIT=none] --> 534 <string name="development_settings_not_available">Developer options are not available for this user</string> 535 <!-- Error message for users that aren't allowed to modify VPN settings [CHAR LIMIT=none] --> 536 <string name="vpn_settings_not_available">VPN settings are not available for this user</string> 537 <!-- Error message for users that aren't allowed to modify Tethering settings [CHAR LIMIT=none] --> 538 <string name="tethering_settings_not_available">Tethering settings are not available for this user</string> 539 <!-- Error message for users that aren't allowed to modify Access Point Names settings [CHAR LIMIT=none] --> 540 <string name="apn_settings_not_available">Access Point Name settings are not available for this user</string> 541 <string name="enable_adb">USB debugging</string> 542 <!-- Setting checkbox summary for Whether to enable USB debugging support on the phone --> 543 <string name="enable_adb_summary">Debug mode when USB is connected</string> 544 <!-- Setting title to revoke secure USB debugging authorizations --> 545 <string name="clear_adb_keys">Revoke USB debugging authorizations</string> 546 <!-- [CHAR LIMIT=NONE] Setting checkbox title for Whether to include bug report item in power menu. --> 547 <string name="bugreport_in_power">Bug report shortcut</string> 548 <!-- [CHAR LIMIT=NONE] Setting checkbox summary for Whether to include bug report item in power --> 549 <string name="bugreport_in_power_summary">Show a button in the power menu for taking a bug report</string> 550 <!-- Setting Checkbox title whether to keep the screen on when plugged in to a power source --> 551 <string name="keep_screen_on">Stay awake</string> 552 <!-- setting Checkbox summary whether to keep the screen on when plugged in --> 553 <string name="keep_screen_on_summary">Screen will never sleep while charging</string> 554 <!-- Setting Checkbox title whether to enable Bluetooth HCI snoop log --> 555 <string name="bt_hci_snoop_log">Enable Bluetooth HCI snoop log</string> 556 <!-- setting Checkbox summary whether to capture all Bluetooth HCI packets in a file [CHAR_LIMIT=100] --> 557 <string name="bt_hci_snoop_log_summary">Capture Bluetooth packets. (Toggle Bluetooth after changing this setting)</string> 558 <!-- setting Checkbox title whether to enable OEM unlock [CHAR_LIMIT=35] --> 559 <string name="oem_unlock_enable">OEM unlocking</string> 560 <!-- setting Checkbox summary whether to enable OEM unlock [CHAR_LIMIT=50] --> 561 <string name="oem_unlock_enable_summary">Allow the bootloader to be unlocked</string> 562 <!-- Confirmation dialog title to ensure user wishes to enable OEM unlock and disable theft protection features --> 563 <string name="confirm_enable_oem_unlock_title">Allow OEM unlocking?</string> 564 <!-- Warning dialog message to confirm user wishes to enable OEM unlock and disable theft protection features --> 565 <string name="confirm_enable_oem_unlock_text">WARNING: Device protection features will not work on this device while this setting is turned on.</string> 566 567 <!-- UI debug setting: select current app to mock location [CHAR LIMIT=50] --> 568 <string name="mock_location_app">Select mock location app</string> 569 <!-- UI debug setting: no mock location app has been set [CHAR LIMIT=50] --> 570 <string name="mock_location_app_not_set">No mock location app set</string> 571 <!-- UI debug setting: mock location app has been set [CHAR LIMIT=50] --> 572 <string name="mock_location_app_set">Mock location app: <xliff:g id="app_name">%1$s</xliff:g></string> 573 574 <!-- Preference category for networking debugging development settings. [CHAR LIMIT=50] --> 575 <string name="debug_networking_category">Networking</string> 576 577 <!-- Setting Checkbox title whether to show options for wireless display certification --> 578 <string name="wifi_display_certification">Wireless display certification</string> 579 <!-- Setting Checkbox title whether to enable WiFi Verbose Logging. [CHAR LIMIT=40] --> 580 <string name="wifi_verbose_logging">Enable Wi\u2011Fi Verbose Logging</string> 581 <!-- Setting Checkbox title whether to disable WiFi Scan Throttling. [CHAR LIMIT=40] --> 582 <string name="wifi_scan_throttling">Wi\u2011Fi scan throttling</string> 583 <!-- Setting Checkbox title whether to always keep mobile data active. [CHAR LIMIT=80] --> 584 <string name="mobile_data_always_on">Mobile data always active</string> 585 <!-- Setting Checkbox title whether to enable hardware acceleration for tethering. [CHAR LIMIT=80] --> 586 <string name="tethering_hardware_offload">Tethering hardware acceleration</string> 587 <!-- Setting Checkbox title for showing Bluetooth devices without names --> 588 <string name="bluetooth_show_devices_without_names">Show Bluetooth devices without names</string> 589 <!-- Setting Checkbox title for disabling Bluetooth absolute volume --> 590 <string name="bluetooth_disable_absolute_volume">Disable absolute volume</string> 591 592 <!-- UI debug setting: Select Bluetooth AVRCP Version --> 593 <string name="bluetooth_select_avrcp_version_string">Bluetooth AVRCP Version</string> 594 <!-- UI debug setting: Select Bluetooth AVRCP Version --> 595 <string name="bluetooth_select_avrcp_version_dialog_title">Select Bluetooth AVRCP Version</string> 596 597 <!-- UI debug setting: Trigger Bluetooth Audio Codec Selection --> 598 <string name="bluetooth_select_a2dp_codec_type">Bluetooth Audio Codec</string> 599 <!-- UI debug setting: Trigger Bluetooth Audio Codec Selection --> 600 <string name="bluetooth_select_a2dp_codec_type_dialog_title">Trigger Bluetooth Audio Codec\u000ASelection</string> 601 602 <!-- UI debug setting: Trigger Bluetooth Audio Sample Rate Selection --> 603 <string name="bluetooth_select_a2dp_codec_sample_rate">Bluetooth Audio Sample Rate</string> 604 <!-- UI debug setting: Trigger Bluetooth Audio Codec Selection: Sample Rate --> 605 <string name="bluetooth_select_a2dp_codec_sample_rate_dialog_title">Trigger Bluetooth Audio Codec\u000ASelection: Sample Rate</string> 606 607 <!-- UI debug setting: Trigger Bluetooth Audio Bits Per Sample Selection --> 608 <string name="bluetooth_select_a2dp_codec_bits_per_sample">Bluetooth Audio Bits Per Sample</string> 609 <!-- UI debug setting: Trigger Bluetooth Audio Codec Selection: Bits Per Sample --> 610 <string name="bluetooth_select_a2dp_codec_bits_per_sample_dialog_title">Trigger Bluetooth Audio Codec\u000ASelection: Bits Per Sample</string> 611 612 <!-- UI debug setting: Trigger Bluetooth Audio Channel Mode Selection --> 613 <string name="bluetooth_select_a2dp_codec_channel_mode">Bluetooth Audio Channel Mode</string> 614 <!-- UI debug setting: Trigger Bluetooth Audio Codec Selection: Channel Mode --> 615 <string name="bluetooth_select_a2dp_codec_channel_mode_dialog_title">Trigger Bluetooth Audio Codec\u000ASelection: Channel Mode</string> 616 617 <!-- UI debug setting: Trigger Bluetooth Audio LDAC Playback Quality Selection --> 618 <string name="bluetooth_select_a2dp_codec_ldac_playback_quality">Bluetooth Audio LDAC Codec: Playback Quality</string> 619 <!-- UI debug setting: Select Bluetooth Audio LDAC Codec: LDAC Playback Quality --> 620 <string name="bluetooth_select_a2dp_codec_ldac_playback_quality_dialog_title">Trigger Bluetooth Audio LDAC\u000ACodec Selection: Playback Quality</string> 621 622 <!-- [CHAR LIMIT=NONE] Label for displaying Bluetooth Audio Codec Parameters while streaming --> 623 <string name="bluetooth_select_a2dp_codec_streaming_label">Streaming: <xliff:g id="streaming_parameter">%1$s</xliff:g></string> 624 625 <!-- Developer option setting for Private DNS --> 626 <string name="select_private_dns_configuration_title">Private DNS</string> 627 <string name="select_private_dns_configuration_dialog_title">Select Private DNS Mode</string> 628 <string name="private_dns_mode_off">Off</string> 629 <string name="private_dns_mode_opportunistic">Automatic</string> 630 <string name="private_dns_mode_provider">Private DNS provider hostname</string> 631 <string name="private_dns_mode_provider_hostname_hint">Enter hostname of DNS provider</string> 632 <string name="private_dns_mode_provider_failure">Couldn\'t connect</string> 633 634 <!-- setting Checkbox summary whether to show options for wireless display certification --> 635 <string name="wifi_display_certification_summary">Show options for wireless display certification</string> 636 <!-- Setting Checkbox summary whether to enable Wifi verbose Logging [CHAR LIMIT=80] --> 637 <string name="wifi_verbose_logging_summary">Increase Wi\u2011Fi logging level, show per SSID RSSI in Wi\u2011Fi Picker</string> 638 <!-- Setting Checkbox summary whether to disable Wifi scan throttling [CHAR LIMIT=NONE] --> 639 <string name="wifi_scan_throttling_summary">Reduces battery drain & improves network performance</string> 640 <!-- Label indicating network has been manually marked as metered --> 641 <string name="wifi_metered_label">Metered</string> 642 <!-- Label indicating network has been manually marked as unmetered --> 643 <string name="wifi_unmetered_label">Unmetered</string> 644 <!-- UI debug setting: limit size of Android logger buffers --> 645 <string name="select_logd_size_title">Logger buffer sizes</string> 646 <!-- UI debug setting: limit size of Android logger buffers [CHAR LIMIT=59] --> 647 <string name="select_logd_size_dialog_title">Select Logger sizes per log buffer</string> 648 <!-- UI debug setting: store logs persistently --> 649 <string name="dev_logpersist_clear_warning_title">Clear logger persistent storage?</string> 650 <!-- Warning text to user about the implications of enabling USB debugging --> 651 <string name="dev_logpersist_clear_warning_message">When we no longer are monitoring with the persistent logger, we are required to erase the logger data resident on your device.</string> 652 <!-- Title of setting: title for selection of logs to store persistently [CHAR LIMIT=60] --> 653 <string name="select_logpersist_title">Store logger data persistently on device</string> 654 <!-- UI debug setting: select which logs to store persistently [CHAR LIMIT=80] --> 655 <string name="select_logpersist_dialog_title">Select log buffers to store persistently on device</string> 656 <!-- UI debug setting: select USB configuration --> 657 <string name="select_usb_configuration_title">Select USB Configuration</string> 658 <!-- UI debug setting: limit size of Android logger buffers [CHAR LIMIT=59] --> 659 <string name="select_usb_configuration_dialog_title">Select USB Configuration</string> 660 <!-- Setting Checkbox title whether to allow mock locations --> 661 <string name="allow_mock_location">Allow mock locations</string> 662 <!-- setting Checkbox summary whether to allow mock locations --> 663 <string name="allow_mock_location_summary">Allow mock locations</string> 664 <!-- Setting Checkbox title whether to enable view attribute inspection --> 665 <string name="debug_view_attributes">Enable view attribute inspection</string> 666 <string name="mobile_data_always_on_summary">Always keep mobile data active, even when Wi\u2011Fi is active (for fast network switching).</string> 667 <string name="tethering_hardware_offload_summary">Use tethering hardware acceleration if available</string> 668 <!-- Title of warning dialog about the implications of enabling USB debugging --> 669 <string name="adb_warning_title">Allow USB debugging?</string> 670 <!-- Warning text to user about the implications of enabling USB debugging --> 671 <string name="adb_warning_message">USB debugging is intended for development purposes only. Use it to copy data between your computer and your device, install apps on your device without notification, and read log data.</string> 672 <!-- Message of dialog confirming that user wants to revoke access to adb from all computers they have authorized --> 673 <string name="adb_keys_warning_message">Revoke access to USB debugging from all computers you\u2019ve previously authorized?</string> 674 <!-- Title of warning dialog about the implications of enabling developer settings --> 675 <string name="dev_settings_warning_title">Allow development settings?</string> 676 <!-- Warning text to user about the implications of enabling USB debugging --> 677 <string name="dev_settings_warning_message">These settings are intended for development use only. They can cause your device and the applications on it to break or misbehave.</string> 678 <!-- Title of checkbox setting to perform package verification on apps installed over USB/ADT/ADB [CHAR LIMIT=32] --> 679 <string name="verify_apps_over_usb_title">Verify apps over USB</string> 680 <!-- Summary of checkbox setting to perform package verification on apps installed over USB/ADT/ADB [CHAR LIMIT=NONE] --> 681 <string name="verify_apps_over_usb_summary">Check apps installed via ADB/ADT for harmful behavior.</string> 682 <!-- Summary of checkbox for showing Bluetooth devices without names --> 683 <string name="bluetooth_show_devices_without_names_summary">Bluetooth devices without names (MAC addresses only) will be displayed</string> 684 <!-- Summary of checkbox for disabling Bluetooth absolute volume --> 685 <string name="bluetooth_disable_absolute_volume_summary">Disables the Bluetooth absolute volume feature in case of volume issues with remote devices such as unacceptably loud volume or lack of control.</string> 686 687 <!-- Title of checkbox setting that enables the terminal app. [CHAR LIMIT=32] --> 688 <string name="enable_terminal_title">Local terminal</string> 689 <!-- Summary of checkbox setting that enables the terminal app. [CHAR LIMIT=64] --> 690 <string name="enable_terminal_summary">Enable terminal app that offers local shell access</string> 691 692 <!-- HDCP checking title, used for debug purposes only. [CHAR LIMIT=25] --> 693 <string name="hdcp_checking_title">HDCP checking</string> 694 <!-- HDCP checking dialog title, used for debug purposes only. [CHAR LIMIT=25] --> 695 <string name="hdcp_checking_dialog_title">Set HDCP checking behavior</string> 696 697 <!-- Preference category for app debugging development settings. [CHAR LIMIT=50] --> 698 <string name="debug_debugging_category">Debugging</string> 699 700 <!-- UI debug setting: select current app to debug [CHAR LIMIT=50] --> 701 <string name="debug_app">Select debug app</string> 702 <!-- UI debug setting: no debug app has been set [CHAR LIMIT=50] --> 703 <string name="debug_app_not_set">No debug application set</string> 704 <!-- UI debug setting: debug app has been set [CHAR LIMIT=50] --> 705 <string name="debug_app_set">Debugging application: <xliff:g id="app_name">%1$s</xliff:g></string> 706 707 <!-- UI debug setting: title for app picker dialog [CHAR LIMIT=50] --> 708 <string name="select_application">Select application</string> 709 <!-- UI debug setting: label for app picker to select no applicatiojn [CHAR LIMIT=50] --> 710 <string name="no_application">Nothing</string> 711 712 <!-- UI debug setting: wait for debugger to attach to debugging process? [CHAR LIMIT=50] --> 713 <string name="wait_for_debugger">Wait for debugger</string> 714 <!-- UI debug setting: wait for debugger to attach to debugging process summary [CHAR LIMIT=500] --> 715 <string name="wait_for_debugger_summary">Debugged application waits for debugger to 716 attach before executing</string> 717 718 <!-- Preference category for input debugging development settings. [CHAR LIMIT=25] --> 719 <string name="debug_input_category">Input</string> 720 721 <!-- Preference category for drawing debugging development settings. [CHAR LIMIT=25] --> 722 <string name="debug_drawing_category">Drawing</string> 723 724 <!-- Preference category for hardware accelerated drawing debugging development settings. [CHAR LIMIT=50] --> 725 <string name="debug_hw_drawing_category">Hardware accelerated rendering</string> 726 727 <!-- Preference category for media development settings. [CHAR LIMIT=50] --> 728 <string name="media_category">Media</string> 729 730 <!-- Preference category for monitoring debugging development settings. [CHAR LIMIT=25] --> 731 <string name="debug_monitoring_category">Monitoring</string> 732 733 <!-- UI debug setting: always enable strict mode? [CHAR LIMIT=25] --> 734 <string name="strict_mode">Strict mode enabled</string> 735 <!-- UI debug setting: show strict mode summary [CHAR LIMIT=50] --> 736 <string name="strict_mode_summary">Flash screen when apps do long operations 737 on main thread</string> 738 739 <!-- UI debug setting: show pointer location? [CHAR LIMIT=25] --> 740 <string name="pointer_location">Pointer location</string> 741 <!-- UI debug setting: show pointer location summary [CHAR LIMIT=50] --> 742 <string name="pointer_location_summary">Screen overlay showing current touch data</string> 743 744 <!-- UI debug setting: show touches? [CHAR LIMIT=25] --> 745 <string name="show_touches">Show taps</string> 746 <!-- UI debug setting: show touches location summary [CHAR LIMIT=50] --> 747 <string name="show_touches_summary">Show visual feedback for taps</string> 748 749 <!-- UI debug setting: show where surface updates happen? [CHAR LIMIT=25] --> 750 <string name="show_screen_updates">Show surface updates</string> 751 <!-- UI debug setting: show surface updates summary [CHAR LIMIT=50] --> 752 <string name="show_screen_updates_summary">Flash entire window surfaces when they update</string> 753 754 <!-- UI debug setting: show where window updates happen with GPU rendering? [CHAR LIMIT=25] --> 755 <string name="show_hw_screen_updates">Show view updates</string> 756 <!-- UI debug setting: show GPU rendering screen updates summary [CHAR LIMIT=50] --> 757 <string name="show_hw_screen_updates_summary">Flash views inside windows when drawn</string> 758 759 <!-- UI debug setting: show when hardware layers get updated [CHAR LIMIT=25] --> 760 <string name="show_hw_layers_updates">Show hardware layers updates</string> 761 <!-- UI debug setting: show hardware layers updates summary [CHAR LIMIT=50] --> 762 <string name="show_hw_layers_updates_summary">Flash hardware layers green when they update</string> 763 764 <!-- UI debug setting: show the amount of overdraw in apps using the GPU [CHAR LIMIT=25] --> 765 <string name="debug_hw_overdraw">Debug GPU overdraw</string> 766 767 <!-- UI debug setting: disable use of overlays? [CHAR LIMIT=25] --> 768 <string name="disable_overlays">Disable HW overlays</string> 769 <!-- UI debug setting: disable use of overlays summary [CHAR LIMIT=50] --> 770 <string name="disable_overlays_summary">Always use GPU for screen compositing</string> 771 772 <!-- UI debug setting: simulate color space anomalies. [CHAR LIMIT=25] --> 773 <string name="simulate_color_space">Simulate color space</string> 774 775 <!-- UI debug setting: enable various types of OpenGL traces [CHAR LIMIT=25] --> 776 <string name="enable_opengl_traces_title">Enable OpenGL traces</string> 777 778 <!-- UI debug setting: disable USB audio routing title [CHAR LIMIT=32] --> 779 <string name="usb_audio_disable_routing">Disable USB audio routing</string> 780 <!-- UI debug setting: disable USB audio routing summary [CHAR LIMIT=50] --> 781 <string name="usb_audio_disable_routing_summary">Disable automatic routing to USB audio peripherals</string> 782 783 <!-- UI debug setting: show layout bounds information [CHAR LIMIT=25] --> 784 <string name="debug_layout">Show layout bounds</string> 785 <!-- UI debug setting: show layout bounds information summary [CHAR LIMIT=50] --> 786 <string name="debug_layout_summary">Show clip bounds, margins, etc.</string> 787 788 <!-- UI debug setting: force right to left layout [CHAR LIMIT=37] --> 789 <string name="force_rtl_layout_all_locales">Force RTL layout direction</string> 790 <!-- UI debug setting: force right to left layout summary [CHAR LIMIT=100] --> 791 <string name="force_rtl_layout_all_locales_summary">Force screen layout direction to RTL for all locales</string> 792 793 <!-- UI debug setting: force anti-aliasing to render apps [CHAR LIMIT=25] --> 794 <string name="force_msaa">Force 4x MSAA</string> 795 <!-- UI debug setting: force anti-aliasing summary [CHAR LIMIT=50] --> 796 <string name="force_msaa_summary">Enable 4x MSAA in OpenGL ES 2.0 apps</string> 797 798 <!-- UI debug setting: show when non-rectangular clip operations are used [CHAR LIMIT=100] --> 799 <string name="show_non_rect_clip">Debug non-rectangular clip operations</string> 800 801 <!-- UI debug setting: profile time taken by hardware acceleration to render apps [CHAR LIMIT=25] --> 802 <string name="track_frame_time">Profile HWUI rendering</string> 803 804 <!-- UI debug setting: enable gpu debug layers [CHAR LIMIT=25] --> 805 <string name="enable_gpu_debug_layers">Enable GPU debug layers</string> 806 <!-- UI debug setting: enable gpu debug layers summary [CHAR LIMIT=50] --> 807 <string name="enable_gpu_debug_layers_summary">Allow loading GPU debug layers for debug apps</string> 808 809 <!-- UI debug setting: scaling factor for window animations [CHAR LIMIT=25] --> 810 <string name="window_animation_scale_title">Window animation scale</string> 811 812 <!-- UI debug setting: scaling factor for transition animations [CHAR LIMIT=25] --> 813 <string name="transition_animation_scale_title">Transition animation scale</string> 814 815 <!-- UI debug setting: scaling factor for all Animator-based animations [CHAR LIMIT=25] --> 816 <string name="animator_duration_scale_title">Animator duration scale</string> 817 818 <!-- UI debug setting: simulate secondary display devices using overlays [CHAR LIMIT=25] --> 819 <string name="overlay_display_devices_title">Simulate secondary displays</string> 820 821 <!-- Preference category for application debugging development settings. [CHAR LIMIT=25] --> 822 <string name="debug_applications_category">Apps</string> 823 824 <!-- UI debug setting: immediately destroy activities? [CHAR LIMIT=25] --> 825 <string name="immediately_destroy_activities">Don\u2019t keep activities</string> 826 <!-- UI debug setting: immediately destroy activities summary [CHAR LIMIT=50] --> 827 <string name="immediately_destroy_activities_summary">Destroy every activity as soon as 828 the user leaves it</string> 829 830 <!-- UI debug setting: limit number of running background processes [CHAR LIMIT=25] --> 831 <string name="app_process_limit_title">Background process limit</string> 832 833 <!-- UI debug setting: show all ANRs? [CHAR LIMIT=25] --> 834 <string name="show_all_anrs">Show background ANRs</string> 835 <!-- UI debug setting: show all ANRs summary [CHAR LIMIT=100] --> 836 <string name="show_all_anrs_summary">Display App Not Responding dialog for background apps</string> 837 838 <!-- UI debug setting: show all ANRs? [CHAR LIMIT=25] --> 839 <string name="show_notification_channel_warnings">Show notification channel warnings</string> 840 <!-- UI debug setting: show all ANRs summary [CHAR LIMIT=50] --> 841 <string name="show_notification_channel_warnings_summary">Displays on-screen warning when an app posts a notification without a valid channel</string> 842 843 844 <!-- UI debug setting: force allow apps on external storage [CHAR LIMIT=50] --> 845 <string name="force_allow_on_external">Force allow apps on external</string> 846 <!-- UI debug setting: force allow on external summary [CHAR LIMIT=150] --> 847 <string name="force_allow_on_external_summary">Makes any app eligible to be written to external storage, regardless of manifest values</string> 848 849 <!-- UI debug setting: force all activites to be resizable for multiwindow [CHAR LIMIT=50] --> 850 <string name="force_resizable_activities">Force activities to be resizable</string> 851 <!-- UI debug setting: force allow on external summary [CHAR LIMIT=150] --> 852 <string name="force_resizable_activities_summary">Make all activities resizable for multi-window, regardless of manifest values.</string> 853 854 <!-- UI debug setting: enable freeform window support [CHAR LIMIT=50] --> 855 <string name="enable_freeform_support">Enable freeform windows</string> 856 <!-- UI debug setting: enable freeform window support summary [CHAR LIMIT=150] --> 857 <string name="enable_freeform_support_summary">Enable support for experimental freeform windows.</string> 858 859 <!-- Local (desktop) backup password menu title [CHAR LIMIT=25] --> 860 <string name="local_backup_password_title">Desktop backup password</string> 861 <!-- Summary text of the "local backup password" setting when the user has not supplied a password --> 862 <string name="local_backup_password_summary_none">Desktop full backups aren\u2019t currently protected</string> 863 <!-- Summary text of the "local backup password" setting when the user has already supplied a password --> 864 <string name="local_backup_password_summary_change">Tap to change or remove the password for desktop full backups</string> 865 866 <!-- Toast message shown when the user successfully sets a new local backup password [CHAR LIMIT=80] --> 867 <string name="local_backup_password_toast_success">New backup password set</string> 868 <!-- Toast message shown when setting a new local backup password fails due to the user not correctly typing the password again for confirmation [CHAR LIMIT=80] --> 869 <string name="local_backup_password_toast_confirmation_mismatch">New password and confirmation don\u2019t match</string> 870 <!-- Toast message shown when setting a new local backup password fails due to the user not supplying the correct existing password. The phrasing here is deliberately quite general. [CHAR LIMIT=80] --> 871 <string name="local_backup_password_toast_validation_failure">Failure setting backup password</string> 872 873 <!-- [CHAR LIMIT=30] Location mode screen, temporary summary text to show as the status of a location 874 setting injected by an external app while the app is being queried for the actual value --> 875 <string name="loading_injected_setting_summary">Loading\u2026</string> 876 877 <!-- Name of each color mode for the display. [CHAR LIMIT=40] --> 878 <string-array name="color_mode_names"> 879 <item>Vibrant (default)</item> 880 <item>Natural</item> 881 <item>Standard</item> 882 </string-array> 883 884 <!-- Description of each color mode for the display. [CHAR LIMIT=NONE] --> 885 <string-array name="color_mode_descriptions"> 886 <item>Enhanced colors</item> 887 <item>Natural colors as seen by the eye</item> 888 <item>Colors optimized for digital content</item> 889 </string-array> 890 891 <!-- Settings item title for apps in standby (limiting background activity) [CHAR LIMIT=35] --> 892 <string name="inactive_apps_title">Standby apps</string> 893 <!-- Settings item summary for inactive app [CHAR LIMIT=100] --> 894 <string name="inactive_app_inactive_summary">Inactive. Tap to toggle.</string> 895 <!-- Settings item summary for active app [CHAR LIMIT=100] --> 896 <string name="inactive_app_active_summary">Active. Tap to toggle.</string> 897 898 <!-- Settings item summary for standby bucket value of an app. [CHAR LIMIT=100] --> 899 <string name="standby_bucket_summary">App standby 900 state:<xliff:g id="bucket"> %s</xliff:g></string> 901 902 <!-- Services settings screen, setting option name for the user to go to the screen to view running services --> 903 <string name="runningservices_settings_title">Running services</string> 904 <!-- Services settings screen, setting option summary for the user to go to the screen to view running services --> 905 <string name="runningservices_settings_summary">View and control currently running services</string> 906 907 <!-- Developer settings: select WebView provider title [CHAR LIMIT=30] --> 908 <string name="select_webview_provider_title">WebView implementation</string> 909 <!-- Developer settings: select WebView provider dialog title [CHAR LIMIT=30] --> 910 <string name="select_webview_provider_dialog_title">Set WebView implementation</string> 911 <!-- Developer settings: text for the WebView provider selection toast shown if an invalid provider was chosen (i.e. the setting list was stale). [CHAR LIMIT=NONE] --> 912 <string name="select_webview_provider_toast_text">This choice is no longer valid. Try again.</string> 913 914 <!-- Developer settings screen, convert userdata to file encryption option name --> 915 <string name="convert_to_file_encryption">Convert to file encryption</string> 916 <!-- Developer settings screen, convert userdata to file encryption summary when option is available --> 917 <string name="convert_to_file_encryption_enabled">Convert\u2026</string> 918 <!-- Developer settings screen, convert userdata to file encryption summary when option is already done --> 919 <string name="convert_to_file_encryption_done">Already file encrypted</string> 920 <!-- Title used on dialog with final prompt for converting to file encryption --> 921 <string name="title_convert_fbe">Converting to file based encryption</string> 922 <!-- Warning displayed on dialog with final prompt for converting to file encryption --> 923 <string name="convert_to_fbe_warning"> 924 Convert data partition to file based encryption.\n 925 !!Warning!! This will erase all your data.\n 926 This feature is alpha, and may not work correctly.\n 927 Press \'Wipe and convert\u2026\' to continue.</string> 928 <!-- Button on dialog that triggers convertion to file encryption --> 929 <string name="button_convert_fbe">Wipe and convert\u2026</string> 930 931 <!-- Name of feature to change color setting for the display [CHAR LIMIT=60] --> 932 <string name="picture_color_mode">Picture color mode</string> 933 934 <!-- Description of feature to change color setting for the display [CHAR LIMIT=NONE] --> 935 <string name="picture_color_mode_desc">Use sRGB</string> 936 937 <!-- Label for disabling color space adjustment [CHAR LIMIT=45] --> 938 <string name="daltonizer_mode_disabled">Disabled</string> 939 <!-- Label for converting display colors to grayscale, which simulates monochromacy (complete color blindness). [CHAR LIMIT=45] --> 940 <string name="daltonizer_mode_monochromacy">Monochromacy</string> 941 <!-- Label for deuteranomaly (red-green color blindness) [CHAR LIMIT=45] --> 942 <string name="daltonizer_mode_deuteranomaly">Deuteranomaly (red-green)</string> 943 <!-- Label for protanomaly (red-green color blindness) [CHAR LIMIT=45] --> 944 <string name="daltonizer_mode_protanomaly">Protanomaly (red-green)</string> 945 <!-- Label for tritanomaly (blue-yellow color blindness) [CHAR LIMIT=45] --> 946 <string name="daltonizer_mode_tritanomaly">Tritanomaly (blue-yellow)</string> 947 948 <!-- Title for the accessibility preference to configure display color space correction. [CHAR LIMIT=NONE] --> 949 <string name="accessibility_display_daltonizer_preference_title">Color correction</string> 950 <!-- Subtitle for the accessibility preference to configure display color space correction. [CHAR LIMIT=NONE] --> 951 <string name="accessibility_display_daltonizer_preference_subtitle">This feature is experimental and may affect performance.</string> 952 <!-- Summary shown for color space correction preference when its value is overridden by another preference [CHAR LIMIT=35] --> 953 <string name="daltonizer_type_overridden">Overridden by <xliff:g id="title" example="Simulate color space">%1$s</xliff:g></string> 954 955 <!-- [CHAR_LIMIT=NONE] Label for battery on main page of settings --> 956 <string name="power_remaining_settings_home_page"><xliff:g id="percentage" example="10%">%1$s</xliff:g> - <xliff:g id="time_string" example="1 hour left based on your usage">%2$s</xliff:g></string> 957 <!-- [CHAR_LIMIT=40] Label for estimated remaining duration of battery discharging --> 958 <string name="power_remaining_duration_only">About <xliff:g id="time_remaining">%1$s</xliff:g> left</string> 959 <!-- [CHAR_LIMIT=40] Label for battery level chart when discharging with duration --> 960 <string name="power_discharging_duration">About <xliff:g id="time_remaining">%1$s</xliff:g> left (<xliff:g id="level">%2$s</xliff:g>)</string> 961 <!-- [CHAR_LIMIT=60] Label for estimated remaining duration of battery discharging --> 962 <string name="power_remaining_duration_only_enhanced">About <xliff:g id="time_remaining">%1$s</xliff:g> left based on your usage</string> 963 <!-- [CHAR_LIMIT=60] Label for battery level chart when discharging with duration and using enhanced estimate --> 964 <string name="power_discharging_duration_enhanced">About <xliff:g id="time_remaining">%1$s</xliff:g> left based on your usage (<xliff:g id="level">%2$s</xliff:g>)</string> 965 <!-- [CHAR_LIMIT=20] Short label for estimated remaining duration of battery charging/discharging --> 966 <string name="power_remaining_duration_only_short"><xliff:g id="time_remaining">%1$s</xliff:g></string> 967 968 <!-- [CHAR_LIMIT=100] Label for enhanced estimated time that phone will run out of battery --> 969 <string name="power_discharge_by_enhanced">Should last until about <xliff:g id="time">%1$s</xliff:g> based on your usage (<xliff:g id="level">%2$s</xliff:g>)</string> 970 <!-- [CHAR_LIMIT=100] Label for enhanced estimated time that phone will run out of battery with no percentage --> 971 <string name="power_discharge_by_only_enhanced">Should last until about <xliff:g id="time">%1$s</xliff:g> based on your usage</string> 972 <!-- [CHAR_LIMIT=100] Label for estimated time that phone will run out of battery --> 973 <string name="power_discharge_by">Should last until about <xliff:g id="time">%1$s</xliff:g> (<xliff:g id="level">%2$s</xliff:g>)</string> 974 <!-- [CHAR_LIMIT=100] Label for estimated time that phone will run out of battery --> 975 <string name="power_discharge_by_only">Should last until about <xliff:g id="time">%1$s</xliff:g></string> 976 <!-- [CHAR_LIMIT=20] Label for estimated time that phone will run out of battery --> 977 <string name="power_discharge_by_only_short">Until <xliff:g id="time" example="12 PM">%1$s</xliff:g></string> 978 <!-- [CHAR_LIMIT=100] Extend the battery life past a certain time --> 979 <string name="power_suggestion_extend_battery">Extend battery life past <xliff:g id="time" example="12 PM">%1$s</xliff:g></string> 980 981 <!-- [CHAR_LIMIT=60] label for estimated remaining duration of battery when under a certain amount --> 982 <string name="power_remaining_less_than_duration_only">Less than <xliff:g id="threshold">%1$s</xliff:g> remaining</string> 983 <!-- [CHAR_LIMIT=60] label for estimated remaining duration of battery when under a certain amount with the percentage --> 984 <string name="power_remaining_less_than_duration">Less than <xliff:g id="threshold">%1$s</xliff:g> remaining (<xliff:g id="level">%2$s</xliff:g>)</string> 985 986 <!-- Used to let users know that they have more than some amount of battery life remaining with percentage. ex: 75% - more than 1 day remaining [CHAR LIMIT = 80] --> 987 <string name="power_remaining_more_than_subtext">More than <xliff:g id="time_remaining">%1$s</xliff:g> remaining (<xliff:g id="level">%2$s</xliff:g>)</string> 988 <!-- Used to let users know that they have more than some amount of battery life remaining. ex: more than 1 day remaining [CHAR LIMIT = 40] --> 989 <string name="power_remaining_only_more_than_subtext">More than <xliff:g id="time_remaining">%1$s</xliff:g> remaining</string> 990 991 <!-- [CHAR_LIMIT=50] Short label for imminent shutdown warning of device --> 992 <string name="power_remaining_duration_only_shutdown_imminent" product="default">Phone may shutdown soon</string> 993 <!-- [CHAR_LIMIT=50] Short label for imminent shutdown warning of device --> 994 <string name="power_remaining_duration_only_shutdown_imminent" product="tablet">Tablet may shutdown soon</string> 995 <!-- [CHAR_LIMIT=50] Short label for imminent shutdown warning of device --> 996 <string name="power_remaining_duration_only_shutdown_imminent" product="device">Device may shutdown soon</string> 997 <!-- [CHAR_LIMIT=60] Label for battery level chart when shutdown is imminent--> 998 <string name="power_remaining_duration_shutdown_imminent" product="default">Phone may shutdown soon (<xliff:g id="level">%1$s</xliff:g>)</string> 999 <!-- [CHAR_LIMIT=60] Label for battery level chart when shutdown is imminent--> 1000 <string name="power_remaining_duration_shutdown_imminent" product="tablet">Tablet may shutdown soon (<xliff:g id="level">%1$s</xliff:g>)</string> 1001 <!-- [CHAR_LIMIT=60] Label for battery level chart when shutdown is imminent--> 1002 <string name="power_remaining_duration_shutdown_imminent" product="device">Device may shutdown soon (<xliff:g id="level">%1$s</xliff:g>)</string> 1003 1004 <!-- [CHAR_LIMIT=40] Label for battery level chart when charging --> 1005 <string name="power_charging"><xliff:g id="level">%1$s</xliff:g> - <xliff:g id="state">%2$s</xliff:g></string> 1006 <!-- [CHAR_LIMIT=40] Label for estimated remaining duration of battery charging --> 1007 <string name="power_remaining_charging_duration_only"><xliff:g id="time">%1$s</xliff:g> left until fully charged</string> 1008 <!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration --> 1009 <string name="power_charging_duration"><xliff:g id="level">%1$s</xliff:g> - <xliff:g id="time">%2$s</xliff:g> until fully charged</string> 1010 1011 <!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed --> 1012 <string name="battery_info_status_unknown">Unknown</string> 1013 <!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging from an unknown source. --> 1014 <string name="battery_info_status_charging">Charging</string> 1015 <!-- [CHAR_LIMIT=20] Battery use screen with lower case. Battery status shown in chart label when charging from an unknown source. --> 1016 <string name="battery_info_status_charging_lower">charging</string> 1017 <!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed --> 1018 <string name="battery_info_status_discharging">Not charging</string> 1019 <!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed --> 1020 <string name="battery_info_status_not_charging">Plugged in, can\'t charge right now</string> 1021 <!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed --> 1022 <string name="battery_info_status_full">Full</string> 1023 1024 <!-- Summary for settings preference disabled by administrator [CHAR LIMIT=50] --> 1025 <string name="disabled_by_admin_summary_text">Controlled by admin</string> 1026 1027 <!-- [CHAR LIMIT=25] Manage applications, text telling using an application is disabled. --> 1028 <string name="disabled">Disabled</string> 1029 <!-- Summary of app trusted to install apps [CHAR LIMIT=45] --> 1030 <string name="external_source_trusted">Allowed</string> 1031 <!-- Summary of app not trusted to install apps [CHAR LIMIT=45] --> 1032 <string name="external_source_untrusted">Not allowed</string> 1033 1034 <!-- Title for settings screen for controlling apps that can install other apps on device [CHAR LIMIT=50] --> 1035 <string name="install_other_apps">Install unknown apps</string> 1036 1037 <!-- Option in navigation drawer that leads to Settings main screen [CHAR LIMIT=30] --> 1038 <string name="home">Settings Home</string> 1039 1040 <!-- Labels on the side of batter graph in Quick Settings and Settings [CHAR LIMIT=8] --> 1041 <string-array name="battery_labels"> 1042 <item>0%</item> 1043 <item>50%</item> 1044 <item>100%</item> 1045 </string-array> 1046 1047 <!-- Label for length of time since the battery graph started [CHAR LIMIT=20] --> 1048 <string name="charge_length_format"><xliff:g name="time" example="3 hours">%1$s</xliff:g> ago</string> 1049 1050 <!-- Label for length of time until battery is charged [CHAR LIMIT=20] --> 1051 <string name="remaining_length_format"><xliff:g name="time" example="3 hours">%1$s</xliff:g> left</string> 1052 1053 <!-- Hint text for the IP address --> 1054 <string name="wifi_ip_address_hint" translatable="false">192.168.1.128</string> 1055 <!-- Hint text for DNS --> 1056 <string name="wifi_dns1_hint" translatable="false">8.8.8.8</string> 1057 <!-- Hint text for DNS --> 1058 <string name="wifi_dns2_hint" translatable="false">8.8.4.4</string> 1059 <!-- Hint text for the gateway --> 1060 <string name="wifi_gateway_hint" translatable="false">192.168.1.1</string> 1061 <!-- Hint text for network prefix length --> 1062 <string name="wifi_network_prefix_length_hint" translatable="false">24</string> 1063 <!-- HTTP proxy settings. The hint text field for port. --> 1064 <string name="proxy_port_hint" translatable="false">8080</string> 1065 <!-- HTTP proxy settings. Hint for Proxy-Auto Config URL. --> 1066 <string name="proxy_url_hint" translatable="false">https://www.example.com/proxy.pac</string> 1067 <!-- HTTP proxy settings. The hint text for proxy exclusion list. --> 1068 <string name="proxy_exclusionlist_hint" translatable="false">example.com,mycomp.test.com,localhost</string> 1069 <!-- HTTP proxy settings. The hint text field for the hostname. --> 1070 <string name="proxy_hostname_hint" translatable="false">proxy.example.com</string> 1071 1072 <!-- Description for the screen zoom level that makes interface elements small. [CHAR LIMIT=24] --> 1073 <string name="screen_zoom_summary_small">Small</string> 1074 <!-- Description for the device's default screen zoom level. [CHAR LIMIT=24] --> 1075 <string name="screen_zoom_summary_default">Default</string> 1076 <!-- Description for the screen zoom level that makes interface elements large. [CHAR LIMIT=24] --> 1077 <string name="screen_zoom_summary_large">Large</string> 1078 <!-- Description for the screen zoom level that makes interface elements larger. [CHAR LIMIT=24] --> 1079 <string name="screen_zoom_summary_very_large">Larger</string> 1080 <!-- Description for the screen zoom level that makes interface elements largest. [CHAR LIMIT=24] --> 1081 <string name="screen_zoom_summary_extremely_large">Largest</string> 1082 <!-- Description for a custom screen zoom level. This shows the requested display 1083 density in raw pixels per inch rather than using a relative description. [CHAR LIMIT=24] --> 1084 <string name="screen_zoom_summary_custom">Custom (<xliff:g id="densityDpi" example="160">%d</xliff:g>)</string> 1085 1086 <!-- Content description for drawer menu button [CHAR_LIMIT=30]--> 1087 <string name="content_description_menu_button">Menu</string> 1088 1089 <!-- Label for carrier demo mode factory reset confirmation dialog. [CHAR LIMIT=NONE] --> 1090 <string name="retail_demo_reset_message">Enter password to perform factory reset in demo mode</string> 1091 <!-- Label for positive button on carrier demo mode factory reset confirmation dialog [CHAR LIMIT=40] --> 1092 <string name="retail_demo_reset_next">Next</string> 1093 <!-- Title for carrier demo mode factory reset confirmation dialog. [CHAR LIMIT=40] --> 1094 <string name="retail_demo_reset_title">Password required</string> 1095 1096 <!-- Glyph to be overlaid atop the battery when the level is extremely low. Do not translate. --> 1097 <string name="battery_meter_very_low_overlay_symbol">!</string> 1098 1099 <!-- Title for settings of active input methods in each IME [CHAR LIMIT=35] --> 1100 <string name="active_input_method_subtypes">Active input methods</string> 1101 <!-- Title for settings whether or not the framework will select input methods in an IME based 1102 on the current system locales. (The user can select multiple system locales) 1103 [CHAR LIMIT=35] --> 1104 <string name="use_system_language_to_select_input_method_subtypes">Use system languages</string> 1105 1106 <!-- Toast that settings for an application is failed to open. --> 1107 <string name="failed_to_open_app_settings_toast">Failed to open settings for <xliff:g id="spell_application_name">%1$s</xliff:g></string> 1108 1109 <!-- Warning message about security implications of enabling an input method, displayed as a dialog 1110 message when the user selects to enable an IME. --> 1111 <string name="ime_security_warning">This input method may be able to collect 1112 all the text you type, including personal data like passwords and credit 1113 card numbers. It comes from the app 1114 <xliff:g id="ime_application_name">%1$s</xliff:g>. 1115 Use this input method?</string> 1116 1117 <!-- [CHAR LIMIT=NONE] Dialog body explaining that the app just selected by the user will not work after a reboot until until after the user enters their credentials, such as a PIN or password. --> 1118 <string name="direct_boot_unaware_dialog_message">Note: After a reboot, this app can\'t start until you unlock your phone</string> 1119 1120 <!--Label of IMS registration header --> 1121 <string name="ims_reg_title">"IMS registration state"</string> 1122 <!--Used when IMS registration state is registered --> 1123 <string name="ims_reg_status_registered">"Registered"</string> 1124 <!--Used when IMS registration state is not registered --> 1125 <string name="ims_reg_status_not_registered">"Not registered"</string> 1126 1127 <!-- About phone, status item value if the actual value is not available. --> 1128 <string name="status_unavailable">Unavailable</string> 1129 1130 <!-- About phone, status value for MAC address when MAC randomization feature is enabled and the device is disconnected. --> 1131 <string name="wifi_status_mac_randomized">MAC is randomized</string> 1132 1133 <!-- Summary to show how many devices are connected in wifi hotspot [CHAR LIMIT=NONE] --> 1134 <plurals name="wifi_tether_connected_summary"> 1135 <item quantity="one">%1$d device connected</item> 1136 <item quantity="other">%1$d devices connected</item> 1137 </plurals> 1138 1139 <!-- Content description of zen mode time condition plus button (not shown on the screen). [CHAR LIMIT=NONE] --> 1140 <string name="accessibility_manual_zen_more_time">More time.</string> 1141 <!-- Content description of zen mode time condition minus button (not shown on the screen). [CHAR LIMIT=NONE] --> 1142 <string name="accessibility_manual_zen_less_time">Less time.</string> 1143 1144 <!-- Button label for generic cancel action [CHAR LIMIT=20] --> 1145 <string name="cancel">Cancel</string> 1146 <!-- Button label for generic OK action [CHAR LIMIT=20] --> 1147 <string name="okay">OK</string> 1148 1149 <!-- Do not disturb: Label for button in enable zen dialog that will turn on zen mode. [CHAR LIMIT=30] --> 1150 <string name="zen_mode_enable_dialog_turn_on">Turn on</string> 1151 <!-- Do not disturb: Title for the Do not Disturb dialog to turn on Do not disturb. [CHAR LIMIT=50]--> 1152 <string name="zen_mode_settings_turn_on_dialog_title">Turn on Do Not Disturb</string> 1153 <!-- Sound: Summary for the Do not Disturb option when there is no automatic rules turned on. [CHAR LIMIT=NONE]--> 1154 <string name="zen_mode_settings_summary_off">Never</string> 1155 <!--[CHAR LIMIT=40] Zen Interruption level: Priority. --> 1156 <string name="zen_interruption_level_priority">Priority only</string> 1157 <!-- [CHAR LIMIT=20] Accessibility string for current zen mode and selected exit condition. A template that simply concatenates existing mode string and the current condition description. --> 1158 <string name="zen_mode_and_condition"><xliff:g id="zen_mode" example="Priority interruptions only">%1$s</xliff:g>. <xliff:g id="exit_condition" example="For one hour">%2$s</xliff:g></string> 1159 <!-- Warning text when an alarm might be silenced by Do Not Disturb [CHAR LIMIT=NONE] --> 1160 <string name="zen_alarm_warning_indef">You won\'t hear your next alarm <xliff:g id="when" example="at 7:00 AM">%1$s</xliff:g> unless you turn this off before then</string> 1161 <!-- Warning text when an alarm might be silenced by Do Not Disturb due to a time-based condition [CHAR LIMIT=NONE] --> 1162 <string name="zen_alarm_warning">You won\'t hear your next alarm <xliff:g id="when" example="at 7:00 AM">%1$s</xliff:g></string> 1163 <!-- Alarm template for near alarms [CHAR LIMIT=25] --> 1164 <string name="alarm_template">at <xliff:g id="when" example="7:00 AM">%1$s</xliff:g></string> 1165 <!-- Alarm template for far in the future alarms [CHAR LIMIT=25] --> 1166 <string name="alarm_template_far">on <xliff:g id="when" example="Fri 7:00 AM">%1$s</xliff:g></string> 1167 1168 <!-- Do not disturb: Title for the dnd duration setting (user can specify how long dnd will last when toggling dnd on from qs or settings) [CHAR LIMIT=30] --> 1169 <string name="zen_mode_duration_settings_title">Duration</string> 1170 <!-- Do not disturb: Duration option to always prompt for the duration of dnd --> 1171 <string name="zen_mode_duration_always_prompt_title">Ask every time</string> 1172 <!-- Do not disturb: Duration option to always have DND on until it is manually turned off [CHAR LIMIT=60] --> 1173 <string name="zen_mode_forever">Until you turn off</string> 1174 1175 <!-- time label for event have that happened very recently [CHAR LIMIT=60] --> 1176 <string name="time_unit_just_now">Just now</string> 1177 1178 <!-- The notice header of Third-party licenses. not translatable --> 1179 <string name="notice_header" translatable="false"></string> 1180 1181 <!-- Name of the this device. [CHAR LIMIT=30] --> 1182 <string name="media_transfer_this_device_name">This device</string> 1183</resources> 1184