1#Uncommenting these urls would only enable 2#the power up auto injection and force injection(test case). 3#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin 4#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin 5#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin 6 7#Version check for XTRA 8#DISABLE = 0 9#AUTO = 1 10#XTRA2 = 2 11#XTRA3 = 3 12XTRA_VERSION_CHECK=0 13 14# Error Estimate 15# _SET = 1 16# _CLEAR = 0 17ERR_ESTIMATE=0 18 19#Test 20NTP_SERVER=time.gpsonextra.net 21#Asia 22# NTP_SERVER=asia.pool.ntp.org 23#Europe 24# NTP_SERVER=europe.pool.ntp.org 25#North America 26# NTP_SERVER=north-america.pool.ntp.org 27 28#XTRA CA path 29XTRA_CA_PATH=/system/etc/security/cacerts 30 31# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 32# 4 - Debug, 5 - Verbose 33# If DEBUG_LEVEL is commented, Android's logging levels will be used 34DEBUG_LEVEL = 2 35 36# Intermediate position report, 1=enable, 0=disable 37INTERMEDIATE_POS=0 38 39# Below bit mask configures how GPS functionalities 40# should be locked when user turns off GPS on Settings 41# Set bit 0x1 if MO GPS functionalities are to be locked 42# Set bit 0x2 if NI GPS functionalities are to be locked 43# default - non is locked for backward compatibility 44#GPS_LOCK = 0 45 46# supl version 1.0 47SUPL_VER=0x10000 48 49# Emergency SUPL, 1=enable, 0=disable 50SUPL_ES=1 51 52#Choose PDN for Emergency SUPL 53#1 - Use emergency PDN 54#0 - Use regular SUPL PDN for Emergency SUPL 55USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 56 57#SUPL_MODE is a bit mask set in config.xml per carrier by default. 58#If it is uncommented here, this value will over write the value from 59#config.xml. 60#MSA=0X2 61#MSB=0X1 62#SUPL_MODE= 63 64# GPS Capabilities bit mask 65# SCHEDULING = 0x01 66# MSB = 0x02 67# MSA = 0x04 68# ON_DEMAND_TIME = 0x10 69# GEOFENCE = 0x20 70# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE 71CAPABILITIES=0x37 72 73# Accuracy threshold for intermediate positions 74# less accurate positions are ignored, 0 for passing all positions 75# ACCURACY_THRES=5000 76 77################################ 78##### AGPS server settings ##### 79################################ 80 81# FOR SUPL SUPPORT, set the following 82# SUPL_HOST=supl.host.com or IP 83# SUPL_PORT=1234 84 85# FOR C2K PDE SUPPORT, set the following 86# C2K_HOST=c2k.pde.com or IP 87# C2K_PORT=1234 88 89# Bitmask of slots that are available 90# for write/install to, where 1s indicate writable, 91# and the default value is 0 where no slots 92# are writable. For example, AGPS_CERT_WRITABLE_MASK 93# of b1000001010 makes 3 slots available 94# and the remaining 7 slots unwritable. 95#AGPS_CERT_WRITABLE_MASK=0 96 97#################################### 98# LTE Positioning Profile Settings 99#################################### 100# 0: Enable RRLP on LTE(Default) 101# 1: Enable LPP_User_Plane on LTE 102# 2: Enable LPP_Control_Plane 103# 3: Enable both LPP_User_Plane and LPP_Control_Plane 104LPP_PROFILE = 0 105 106################################ 107# EXTRA SETTINGS 108################################ 109# NMEA provider (1=Modem Processor, 0=Application Processor) 110NMEA_PROVIDER=0 111# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) 112SGLTE_TARGET=0 113 114################################################## 115# Select Positioning Protocol on A-GLONASS system 116################################################## 117# 0x1: RRC CPlane 118# 0x2: RRLP UPlane 119# 0x4: LLP Uplane 120A_GLONASS_POS_PROTOCOL_SELECT = 0 121