1# XTRA_SERVER_QUERY (1=on, 0=off) 2# If XTRA_SERVER_QUERY is on, the XTRA_SERVERs listed 3# below will be ignored, and instead the servers will 4# be queried from the modem. 5XTRA_SERVER_QUERY=0 6# XTRA_SERVERs below are used only if XTRA_SERVER_QUERY 7# is off. 8XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin 9XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin 10XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin 11 12# Error Estimate 13# _SET = 1 14# _CLEAR = 0 15ERR_ESTIMATE=0 16 17#Test 18NTP_SERVER=time.gpsonextra.net 19#Asia 20# NTP_SERVER=asia.pool.ntp.org 21#Europe 22# NTP_SERVER=europe.pool.ntp.org 23#North America 24# NTP_SERVER=north-america.pool.ntp.org 25 26# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 27# 4 - Debug, 5 - Verbose 28# If DEBUG_LEVEL is commented, Android's logging levels will be used 29DEBUG_LEVEL = 2 30 31# Intermediate position report, 1=enable, 0=disable 32INTERMEDIATE_POS=0 33 34# Below bit mask configures how GPS functionalities 35# should be locked when user turns off GPS on Settings 36# Set bit 0x1 if MO GPS functionalities are to be locked 37# Set bit 0x2 if NI GPS functionalities are to be locked 38# default - non is locked for backward compatibility 39#GPS_LOCK = 0 40 41# supl version 1.0 42SUPL_VER=0x10000 43 44# GPS Capabilities bit mask 45# SCHEDULING = 0x01 46# MSB = 0x02 47# MSA = 0x04 48# ON_DEMAND_TIME = 0x10 49# GEOFENCE = 0x20 50# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE 51CAPABILITIES=0x37 52 53# Accuracy threshold for intermediate positions 54# less accurate positions are ignored, 0 for passing all positions 55# ACCURACY_THRES=5000 56 57################################ 58##### AGPS server settings ##### 59################################ 60 61# FOR SUPL SUPPORT, set the following 62# SUPL_HOST=supl.host.com or IP 63# SUPL_PORT=1234 64SUPL_HOST=supl.google.com 65SUPL_PORT=7276 66 67# FOR C2K PDE SUPPORT, set the following 68# C2K_HOST=c2k.pde.com or IP 69# C2K_PORT=1234 70 71#################################### 72# LTE Positioning Profile Settings 73#################################### 74# 0: Enable RRLP on LTE(Default) 75# 1: Enable LPP_User_Plane on LTE 76# 2: Enable LPP_Control_Plane 77# 3: Enable both LPP_User_Plane and LPP_Control_Plane 78LPP_PROFILE = 0 79 80################################ 81# EXTRA SETTINGS 82################################ 83# NMEA provider (1=Modem Processor, 0=Application Processor) 84NMEA_PROVIDER=0 85 86################################################## 87# Select Positioning Protocol on A-GLONASS system 88################################################## 89# 0x1: RRC CPlane 90# 0x2: RRLP UPlane 91# 0x4: LLP Uplane 92A_GLONASS_POS_PROTOCOL_SELECT = 0 93