1#Uncommenting these urls would only enable 2#the power up auto injection and force injection(test case). 3#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin 4#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin 5#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin 6 7#Version check for XTRA 8#DISABLE = 0 9#AUTO = 1 10#XTRA2 = 2 11#XTRA3 = 3 12XTRA_VERSION_CHECK=0 13 14# Error Estimate 15# _SET = 1 16# _CLEAR = 0 17ERR_ESTIMATE=0 18 19#NTP server 20NTP_SERVER=time.izatcloud.net 21 22# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 23# 4 - Debug, 5 - Verbose 24# If DEBUG_LEVEL is commented, Android's logging levels will be used 25DEBUG_LEVEL = 2 26 27# Intermediate position report, 1=enable, 0=disable 28INTERMEDIATE_POS=0 29 30# Below bit mask configures how GPS functionalities 31# should be locked when user turns off GPS on Settings 32# Set bit 0x1 if MO GPS functionalities are to be locked 33# Set bit 0x2 if NI GPS functionalities are to be locked 34# default - non is locked for backward compatibility 35#GPS_LOCK = 0 36 37# supl version 1.0 38SUPL_VER=0x10000 39 40# Emergency SUPL, 1=enable, 0=disable 41SUPL_ES=0 42 43#Choose PDN for Emergency SUPL 44#1 - Use emergency PDN 45#0 - Use regular SUPL PDN for Emergency SUPL 46USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 47 48#SUPL_MODE is a bit mask set in config.xml per carrier by default. 49#If it is uncommented here, this value will overwrite the value from 50#config.xml. 51#MSA=0X2 52#MSB=0X1 53#SUPL_MODE= 54 55# GPS Capabilities bit mask 56# SCHEDULING = 0x01 57# MSB = 0x02 58# MSA = 0x04 59# ON_DEMAND_TIME = 0x10 60# GEOFENCE = 0x20 61# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE 62CAPABILITIES=0x37 63 64# Accuracy threshold for intermediate positions 65# less accurate positions are ignored, 0 for passing all positions 66# ACCURACY_THRES=5000 67 68################################ 69##### AGPS server settings ##### 70################################ 71 72# FOR SUPL SUPPORT, set the following 73# SUPL_HOST=supl.host.com or IP 74# SUPL_PORT=1234 75 76# FOR C2K PDE SUPPORT, set the following 77# C2K_HOST=c2k.pde.com or IP 78# C2K_PORT=1234 79 80# Bitmask of slots that are available 81# for write/install to, where 1s indicate writable, 82# and the default value is 0 where no slots 83# are writable. For example, AGPS_CERT_WRITABLE_MASK 84# of b1000001010 makes 3 slots available 85# and the remaining 7 slots unwritable. 86#AGPS_CERT_WRITABLE_MASK=0 87 88#################################### 89# LTE Positioning Profile Settings 90#################################### 91# 0: Enable RRLP on LTE(Default) 92# 1: Enable LPP_User_Plane on LTE 93# 2: Enable LPP_Control_Plane 94# 3: Enable both LPP_User_Plane and LPP_Control_Plane 95LPP_PROFILE = 2 96 97################################ 98# EXTRA SETTINGS 99################################ 100# NMEA provider (1=Modem Processor, 0=Application Processor) 101NMEA_PROVIDER=0 102# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) 103SGLTE_TARGET=0 104 105################################################## 106# Select Positioning Protocol on A-GLONASS system 107################################################## 108# 0x1: RRC CPlane 109# 0x2: RRLP UPlane 110# 0x4: LLP Uplane 111A_GLONASS_POS_PROTOCOL_SELECT = 0 112