1 /** @file 2 Private Include file for IdeBus PEIM. 3 4 Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> 5 6 This program and the accompanying materials 7 are licensed and made available under the terms and conditions 8 of the BSD License which accompanies this distribution. The 9 full text of the license may be found at 10 http://opensource.org/licenses/bsd-license.php 11 12 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 13 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 14 15 **/ 16 17 #ifndef _RECOVERY_ATAPI_H_ 18 #define _RECOVERY_ATAPI_H_ 19 20 #include <PiPei.h> 21 22 #include <Ppi/BlockIo.h> 23 #include <Ppi/BlockIo2.h> 24 #include <Ppi/AtaController.h> 25 26 #include <Library/DebugLib.h> 27 #include <Library/TimerLib.h> 28 #include <Library/PeimEntryPoint.h> 29 #include <Library/PeiServicesLib.h> 30 #include <Library/BaseMemoryLib.h> 31 #include <Library/IoLib.h> 32 #include <Library/PeiServicesTablePointerLib.h> 33 #include <Library/MemoryAllocationLib.h> 34 #include <Library/PcdLib.h> 35 36 37 #include <IndustryStandard/Atapi.h> 38 39 #define MAX_SENSE_KEY_COUNT 6 40 #define MAX_IDE_CHANNELS 4 // Ide and Sata Primary, Secondary Channel. 41 #define MAX_IDE_DEVICES 8 // Ide, Sata Primary, Secondary and Master, Slave device. 42 43 typedef enum { 44 IdePrimary = 0, 45 IdeSecondary = 1, 46 IdeMaxChannel = 2 47 } EFI_IDE_CHANNEL; 48 49 typedef enum { 50 IdeMaster = 0, 51 IdeSlave = 1, 52 IdeMaxDevice = 2 53 } EFI_IDE_DEVICE; 54 55 // 56 // IDE Registers 57 // 58 typedef union { 59 UINT16 Command; /* when write */ 60 UINT16 Status; /* when read */ 61 } IDE_CMD_OR_STATUS; 62 63 typedef union { 64 UINT16 Error; /* when read */ 65 UINT16 Feature; /* when write */ 66 } IDE_ERROR_OR_FEATURE; 67 68 typedef union { 69 UINT16 AltStatus; /* when read */ 70 UINT16 DeviceControl; /* when write */ 71 } IDE_ALTSTATUS_OR_DEVICECONTROL; 72 73 // 74 // IDE registers set 75 // 76 typedef struct { 77 UINT16 Data; 78 IDE_ERROR_OR_FEATURE Reg1; 79 UINT16 SectorCount; 80 UINT16 SectorNumber; 81 UINT16 CylinderLsb; 82 UINT16 CylinderMsb; 83 UINT16 Head; 84 IDE_CMD_OR_STATUS Reg; 85 86 IDE_ALTSTATUS_OR_DEVICECONTROL Alt; 87 UINT16 DriveAddress; 88 } IDE_BASE_REGISTERS; 89 90 typedef struct { 91 92 UINTN DevicePosition; 93 EFI_PEI_BLOCK_IO_MEDIA MediaInfo; 94 EFI_PEI_BLOCK_IO2_MEDIA MediaInfo2; 95 96 } PEI_ATAPI_DEVICE_INFO; 97 98 #define ATAPI_BLK_IO_DEV_SIGNATURE SIGNATURE_32 ('a', 'b', 'i', 'o') 99 typedef struct { 100 UINTN Signature; 101 102 EFI_PEI_RECOVERY_BLOCK_IO_PPI AtapiBlkIo; 103 EFI_PEI_RECOVERY_BLOCK_IO2_PPI AtapiBlkIo2; 104 EFI_PEI_PPI_DESCRIPTOR PpiDescriptor; 105 EFI_PEI_PPI_DESCRIPTOR PpiDescriptor2; 106 PEI_ATA_CONTROLLER_PPI *AtaControllerPpi; 107 108 UINTN DeviceCount; 109 PEI_ATAPI_DEVICE_INFO DeviceInfo[MAX_IDE_DEVICES]; //for max 8 device 110 IDE_BASE_REGISTERS IdeIoPortReg[MAX_IDE_CHANNELS]; //for max 4 channel. 111 } ATAPI_BLK_IO_DEV; 112 113 #define PEI_RECOVERY_ATAPI_FROM_BLKIO_THIS(a) CR (a, ATAPI_BLK_IO_DEV, AtapiBlkIo, ATAPI_BLK_IO_DEV_SIGNATURE) 114 #define PEI_RECOVERY_ATAPI_FROM_BLKIO2_THIS(a) CR (a, ATAPI_BLK_IO_DEV, AtapiBlkIo2, ATAPI_BLK_IO_DEV_SIGNATURE) 115 116 117 #define STALL_1_MILLI_SECOND 1000 // stall 1 ms 118 #define STALL_1_SECONDS 1000 * STALL_1_MILLI_SECOND 119 120 // 121 // Time Out Value For IDE Device Polling 122 // 123 // ATATIMEOUT is used for waiting time out for ATA device 124 // 125 #define ATATIMEOUT 1000 // 1 second 126 // ATAPITIMEOUT is used for waiting operation 127 // except read and write time out for ATAPI device 128 // 129 #define ATAPITIMEOUT 1000 // 1 second 130 // ATAPILONGTIMEOUT is used for waiting read and 131 // write operation timeout for ATAPI device 132 // 133 #define CDROMLONGTIMEOUT 2000 // 2 seconds 134 #define ATAPILONGTIMEOUT 5000 // 5 seconds 135 136 // 137 // PEI Recovery Block I/O PPI 138 // 139 140 /** 141 Gets the count of block I/O devices that one specific block driver detects. 142 143 This function is used for getting the count of block I/O devices that one 144 specific block driver detects. To the PEI ATAPI driver, it returns the number 145 of all the detected ATAPI devices it detects during the enumeration process. 146 To the PEI legacy floppy driver, it returns the number of all the legacy 147 devices it finds during its enumeration process. If no device is detected, 148 then the function will return zero. 149 150 @param[in] PeiServices General-purpose services that are available 151 to every PEIM. 152 @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI 153 instance. 154 @param[out] NumberBlockDevices The number of block I/O devices discovered. 155 156 @retval EFI_SUCCESS Operation performed successfully. 157 158 **/ 159 EFI_STATUS 160 EFIAPI 161 AtapiGetNumberOfBlockDevices ( 162 IN EFI_PEI_SERVICES **PeiServices, 163 IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This, 164 OUT UINTN *NumberBlockDevices 165 ); 166 167 /** 168 Gets a block device's media information. 169 170 This function will provide the caller with the specified block device's media 171 information. If the media changes, calling this function will update the media 172 information accordingly. 173 174 @param[in] PeiServices General-purpose services that are available to every 175 PEIM 176 @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance. 177 @param[in] DeviceIndex Specifies the block device to which the function wants 178 to talk. Because the driver that implements Block I/O 179 PPIs will manage multiple block devices, the PPIs that 180 want to talk to a single device must specify the 181 device index that was assigned during the enumeration 182 process. This index is a number from one to 183 NumberBlockDevices. 184 @param[out] MediaInfo The media information of the specified block media. 185 The caller is responsible for the ownership of this 186 data structure. 187 188 @retval EFI_SUCCESS Media information about the specified block device 189 was obtained successfully. 190 @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware 191 error. 192 @retval Others Other failure occurs. 193 194 **/ 195 EFI_STATUS 196 EFIAPI 197 AtapiGetBlockDeviceMediaInfo ( 198 IN EFI_PEI_SERVICES **PeiServices, 199 IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This, 200 IN UINTN DeviceIndex, 201 OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo 202 ); 203 204 /** 205 Reads the requested number of blocks from the specified block device. 206 207 The function reads the requested number of blocks from the device. All the 208 blocks are read, or an error is returned. If there is no media in the device, 209 the function returns EFI_NO_MEDIA. 210 211 @param[in] PeiServices General-purpose services that are available to 212 every PEIM. 213 @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance. 214 @param[in] DeviceIndex Specifies the block device to which the function wants 215 to talk. Because the driver that implements Block I/O 216 PPIs will manage multiple block devices, the PPIs that 217 want to talk to a single device must specify the device 218 index that was assigned during the enumeration process. 219 This index is a number from one to NumberBlockDevices. 220 @param[in] StartLBA The starting logical block address (LBA) to read from 221 on the device 222 @param[in] BufferSize The size of the Buffer in bytes. This number must be 223 a multiple of the intrinsic block size of the device. 224 @param[out] Buffer A pointer to the destination buffer for the data. 225 The caller is responsible for the ownership of the 226 buffer. 227 228 @retval EFI_SUCCESS The data was read correctly from the device. 229 @retval EFI_DEVICE_ERROR The device reported an error while attempting 230 to perform the read operation. 231 @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not 232 valid, or the buffer is not properly aligned. 233 @retval EFI_NO_MEDIA There is no media in the device. 234 @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of 235 the intrinsic block size of the device. 236 237 **/ 238 EFI_STATUS 239 EFIAPI 240 AtapiReadBlocks ( 241 IN EFI_PEI_SERVICES **PeiServices, 242 IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This, 243 IN UINTN DeviceIndex, 244 IN EFI_PEI_LBA StartLBA, 245 IN UINTN BufferSize, 246 OUT VOID *Buffer 247 ); 248 249 /** 250 Gets the count of block I/O devices that one specific block driver detects. 251 252 This function is used for getting the count of block I/O devices that one 253 specific block driver detects. To the PEI ATAPI driver, it returns the number 254 of all the detected ATAPI devices it detects during the enumeration process. 255 To the PEI legacy floppy driver, it returns the number of all the legacy 256 devices it finds during its enumeration process. If no device is detected, 257 then the function will return zero. 258 259 @param[in] PeiServices General-purpose services that are available 260 to every PEIM. 261 @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI 262 instance. 263 @param[out] NumberBlockDevices The number of block I/O devices discovered. 264 265 @retval EFI_SUCCESS Operation performed successfully. 266 267 **/ 268 EFI_STATUS 269 EFIAPI 270 AtapiGetNumberOfBlockDevices2 ( 271 IN EFI_PEI_SERVICES **PeiServices, 272 IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, 273 OUT UINTN *NumberBlockDevices 274 ); 275 276 /** 277 Gets a block device's media information. 278 279 This function will provide the caller with the specified block device's media 280 information. If the media changes, calling this function will update the media 281 information accordingly. 282 283 @param[in] PeiServices General-purpose services that are available to every 284 PEIM 285 @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance. 286 @param[in] DeviceIndex Specifies the block device to which the function wants 287 to talk. Because the driver that implements Block I/O 288 PPIs will manage multiple block devices, the PPIs that 289 want to talk to a single device must specify the 290 device index that was assigned during the enumeration 291 process. This index is a number from one to 292 NumberBlockDevices. 293 @param[out] MediaInfo The media information of the specified block media. 294 The caller is responsible for the ownership of this 295 data structure. 296 297 @retval EFI_SUCCESS Media information about the specified block device 298 was obtained successfully. 299 @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware 300 error. 301 @retval Others Other failure occurs. 302 303 **/ 304 EFI_STATUS 305 EFIAPI 306 AtapiGetBlockDeviceMediaInfo2 ( 307 IN EFI_PEI_SERVICES **PeiServices, 308 IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, 309 IN UINTN DeviceIndex, 310 OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo 311 ); 312 313 /** 314 Reads the requested number of blocks from the specified block device. 315 316 The function reads the requested number of blocks from the device. All the 317 blocks are read, or an error is returned. If there is no media in the device, 318 the function returns EFI_NO_MEDIA. 319 320 @param[in] PeiServices General-purpose services that are available to 321 every PEIM. 322 @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance. 323 @param[in] DeviceIndex Specifies the block device to which the function wants 324 to talk. Because the driver that implements Block I/O 325 PPIs will manage multiple block devices, the PPIs that 326 want to talk to a single device must specify the device 327 index that was assigned during the enumeration process. 328 This index is a number from one to NumberBlockDevices. 329 @param[in] StartLBA The starting logical block address (LBA) to read from 330 on the device 331 @param[in] BufferSize The size of the Buffer in bytes. This number must be 332 a multiple of the intrinsic block size of the device. 333 @param[out] Buffer A pointer to the destination buffer for the data. 334 The caller is responsible for the ownership of the 335 buffer. 336 337 @retval EFI_SUCCESS The data was read correctly from the device. 338 @retval EFI_DEVICE_ERROR The device reported an error while attempting 339 to perform the read operation. 340 @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not 341 valid, or the buffer is not properly aligned. 342 @retval EFI_NO_MEDIA There is no media in the device. 343 @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of 344 the intrinsic block size of the device. 345 346 **/ 347 EFI_STATUS 348 EFIAPI 349 AtapiReadBlocks2 ( 350 IN EFI_PEI_SERVICES **PeiServices, 351 IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, 352 IN UINTN DeviceIndex, 353 IN EFI_PEI_LBA StartLBA, 354 IN UINTN BufferSize, 355 OUT VOID *Buffer 356 ); 357 358 // 359 // Internal functions 360 // 361 362 /** 363 Enumerate Atapi devices. 364 365 This function is used to enumerate Atatpi device in Ide channel. 366 367 @param[in] AtapiBlkIoDev A pointer to atapi block IO device 368 369 **/ 370 VOID 371 AtapiEnumerateDevices ( 372 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev 373 ); 374 375 /** 376 Detect Atapi devices. 377 378 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 379 @param[in] DevicePosition An integer to signify device position. 380 @param[out] MediaInfo The media information of the specified block media. 381 @param[out] MediaInfo2 The media information 2 of the specified block media. 382 383 @retval TRUE Atapi device exists in specified position. 384 @retval FALSE Atapi device does not exist in specified position. 385 386 **/ 387 BOOLEAN 388 DiscoverAtapiDevice ( 389 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 390 IN UINTN DevicePosition, 391 OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo, 392 OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2 393 ); 394 395 /** 396 Detect if an IDE controller exists in specified position. 397 398 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 399 @param[in] DevicePosition An integer to signify device position. 400 401 @retval TRUE The Atapi device exists. 402 @retval FALSE The Atapi device does not present. 403 404 **/ 405 BOOLEAN 406 DetectIDEController ( 407 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 408 IN UINTN DevicePosition 409 ); 410 411 /** 412 Wait specified time interval to poll for BSY bit clear in the Status Register. 413 414 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 415 @param[in] IdeIoRegisters A pointer to IDE IO registers. 416 @param[in] TimeoutInMilliSeconds Time specified in milliseconds. 417 418 @retval EFI_SUCCESS BSY bit is cleared in the specified time interval. 419 @retval EFI_TIMEOUT BSY bit is not cleared in the specified time interval. 420 421 **/ 422 EFI_STATUS 423 WaitForBSYClear ( 424 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 425 IN IDE_BASE_REGISTERS *IdeIoRegisters, 426 IN UINTN TimeoutInMilliSeconds 427 ); 428 429 /** 430 Wait specified time interval to poll for DRDY bit set in the Status register. 431 432 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 433 @param[in] IdeIoRegisters A pointer to IDE IO registers. 434 @param[in] TimeoutInMilliSeconds Time specified in milliseconds. 435 436 @retval EFI_SUCCESS DRDY bit is set in the specified time interval. 437 @retval EFI_TIMEOUT DRDY bit is not set in the specified time interval. 438 439 **/ 440 EFI_STATUS 441 DRDYReady ( 442 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 443 IN IDE_BASE_REGISTERS *IdeIoRegisters, 444 IN UINTN TimeoutInMilliSeconds 445 ); 446 447 /** 448 Wait specified time interval to poll for DRQ bit clear in the Status Register. 449 450 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 451 @param[in] IdeIoRegisters A pointer to IDE IO registers. 452 @param[in] TimeoutInMilliSeconds Time specified in milliseconds. 453 454 @retval EFI_SUCCESS DRQ bit is cleared in the specified time interval. 455 @retval EFI_TIMEOUT DRQ bit is not cleared in the specified time interval. 456 457 **/ 458 EFI_STATUS 459 DRQClear ( 460 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 461 IN IDE_BASE_REGISTERS *IdeIoRegisters, 462 IN UINTN TimeoutInMilliSeconds 463 ); 464 465 /** 466 Wait specified time interval to poll for DRQ bit clear in the Alternate Status Register. 467 468 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 469 @param[in] IdeIoRegisters A pointer to IDE IO registers. 470 @param[in] TimeoutInMilliSeconds Time specified in milliseconds. 471 472 @retval EFI_SUCCESS DRQ bit is cleared in the specified time interval. 473 @retval EFI_TIMEOUT DRQ bit is not cleared in the specified time interval. 474 475 **/ 476 EFI_STATUS 477 DRQClear2 ( 478 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 479 IN IDE_BASE_REGISTERS *IdeIoRegisters, 480 IN UINTN TimeoutInMilliSeconds 481 ); 482 483 /** 484 Wait specified time interval to poll for DRQ bit set in the Status Register. 485 486 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 487 @param[in] IdeIoRegisters A pointer to IDE IO registers. 488 @param[in] TimeoutInMilliSeconds Time specified in milliseconds. 489 490 @retval EFI_SUCCESS DRQ bit is set in the specified time interval. 491 @retval EFI_TIMEOUT DRQ bit is not set in the specified time interval. 492 @retval EFI_ABORTED Operation Aborted. 493 494 **/ 495 EFI_STATUS 496 DRQReady ( 497 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 498 IN IDE_BASE_REGISTERS *IdeIoRegisters, 499 IN UINTN TimeoutInMilliSeconds 500 ); 501 502 /** 503 Wait specified time interval to poll for DRQ bit set in the Alternate Status Register. 504 505 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 506 @param[in] IdeIoRegisters A pointer to IDE IO registers. 507 @param[in] TimeoutInMilliSeconds Time specified in milliseconds. 508 509 @retval EFI_SUCCESS DRQ bit is set in the specified time interval. 510 @retval EFI_TIMEOUT DRQ bit is not set in the specified time interval. 511 @retval EFI_ABORTED Operation Aborted. 512 513 **/ 514 EFI_STATUS 515 DRQReady2 ( 516 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 517 IN IDE_BASE_REGISTERS *IdeIoRegisters, 518 IN UINTN TimeoutInMilliSeconds 519 ); 520 521 /** 522 Check if there is an error in Status Register. 523 524 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 525 @param[in] StatusReg The address to IDE IO registers. 526 527 @retval EFI_SUCCESS Operation success. 528 @retval EFI_DEVICE_ERROR Device error. 529 530 **/ 531 EFI_STATUS 532 CheckErrorStatus ( 533 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 534 IN UINT16 StatusReg 535 ); 536 537 /** 538 Idendify Atapi devices. 539 540 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 541 @param[in] DevicePosition An integer to signify device position. 542 543 @retval EFI_SUCCESS Identify successfully. 544 @retval EFI_DEVICE_ERROR Device cannot be identified successfully. 545 546 **/ 547 EFI_STATUS 548 ATAPIIdentify ( 549 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 550 IN UINTN DevicePosition 551 ); 552 553 /** 554 Sends out ATAPI Test Unit Ready Packet Command to the specified device 555 to find out whether device is accessible. 556 557 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 558 @param[in] DevicePosition An integer to signify device position. 559 560 @retval EFI_SUCCESS TestUnit command executed successfully. 561 @retval EFI_DEVICE_ERROR Device cannot be executed TestUnit command successfully. 562 563 **/ 564 EFI_STATUS 565 TestUnitReady ( 566 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 567 IN UINTN DevicePosition 568 ) ; 569 570 /** 571 Send out ATAPI commands conforms to the Packet Command with PIO Data In Protocol. 572 573 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 574 @param[in] DevicePosition An integer to signify device position. 575 @param[in] Packet A pointer to ATAPI command packet. 576 @param[in] Buffer Buffer to contain requested transfer data from device. 577 @param[in] ByteCount Requested transfer data length. 578 @param[in] TimeoutInMilliSeconds Time out value, in unit of milliseconds. 579 580 @retval EFI_SUCCESS Command executed successfully. 581 @retval EFI_DEVICE_ERROR Device cannot be executed command successfully. 582 583 **/ 584 EFI_STATUS 585 AtapiPacketCommandIn ( 586 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 587 IN UINTN DevicePosition, 588 IN ATAPI_PACKET_COMMAND *Packet, 589 IN UINT16 *Buffer, 590 IN UINT32 ByteCount, 591 IN UINTN TimeoutInMilliSeconds 592 ); 593 594 /** 595 Sends out ATAPI Inquiry Packet Command to the specified device. 596 This command will return INQUIRY data of the device. 597 598 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 599 @param[in] DevicePosition An integer to signify device position. 600 @param[out] MediaInfo The media information of the specified block media. 601 @param[out] MediaInfo2 The media information 2 of the specified block media. 602 603 @retval EFI_SUCCESS Command executed successfully. 604 @retval EFI_DEVICE_ERROR Device cannot be executed command successfully. 605 @retval EFI_UNSUPPORTED Unsupported device type. 606 607 **/ 608 EFI_STATUS 609 Inquiry ( 610 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 611 IN UINTN DevicePosition, 612 OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo, 613 OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2 614 ); 615 616 /** 617 Used before read/write blocks from/to ATAPI device media. 618 Since ATAPI device media is removable, it is necessary to detect 619 whether media is present and get current present media's information. 620 621 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 622 @param[in] DevicePosition An integer to signify device position. 623 @param[in, out] MediaInfo The media information of the specified block media. 624 @param[in, out] MediaInfo2 The media information 2 of the specified block media. 625 626 @retval EFI_SUCCESS Command executed successfully. 627 @retval EFI_DEVICE_ERROR Some device errors happen. 628 @retval EFI_OUT_OF_RESOURCES Can not allocate required resources. 629 630 **/ 631 EFI_STATUS 632 DetectMedia ( 633 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 634 IN UINTN DevicePosition, 635 IN OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo, 636 IN OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2 637 ); 638 639 /** 640 Reset specified Atapi device. 641 642 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 643 @param[in] DevicePosition An integer to signify device position. 644 @param[in] Extensive If TRUE, use ATA soft reset, otherwise use Atapi soft reset. 645 646 @retval EFI_SUCCESS Command executed successfully. 647 @retval EFI_DEVICE_ERROR Some device errors happen. 648 649 **/ 650 EFI_STATUS 651 ResetDevice ( 652 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 653 IN UINTN DevicePosition, 654 IN BOOLEAN Extensive 655 ); 656 657 /** 658 Sends out ATAPI Request Sense Packet Command to the specified device. 659 660 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 661 @param[in] DevicePosition An integer to signify device position. 662 @param[in] SenseBuffers Pointer to sense buffer. 663 @param[in, out] SenseCounts Length of sense buffer. 664 665 @retval EFI_SUCCESS Command executed successfully. 666 @retval EFI_DEVICE_ERROR Some device errors happen. 667 668 **/ 669 EFI_STATUS 670 RequestSense ( 671 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 672 IN UINTN DevicePosition, 673 IN ATAPI_REQUEST_SENSE_DATA *SenseBuffers, 674 IN OUT UINT8 *SenseCounts 675 ); 676 677 /** 678 Sends out ATAPI Read Capacity Packet Command to the specified device. 679 This command will return the information regarding the capacity of the 680 media in the device. 681 682 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 683 @param[in] DevicePosition An integer to signify device position. 684 @param[in, out] MediaInfo The media information of the specified block media. 685 @param[in, out] MediaInfo2 The media information 2 of the specified block media. 686 687 @retval EFI_SUCCESS Command executed successfully. 688 @retval EFI_DEVICE_ERROR Some device errors happen. 689 690 **/ 691 EFI_STATUS 692 ReadCapacity ( 693 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 694 IN UINTN DevicePosition, 695 IN OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo, 696 IN OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2 697 ); 698 699 /** 700 Perform read from disk in block unit. 701 702 @param[in] AtapiBlkIoDev A pointer to atapi block IO device. 703 @param[in] DevicePosition An integer to signify device position. 704 @param[in] Buffer Buffer to contain read data. 705 @param[in] StartLba Starting LBA address. 706 @param[in] NumberOfBlocks Number of blocks to read. 707 @param[in] BlockSize Size of each block. 708 709 @retval EFI_SUCCESS Command executed successfully. 710 @retval EFI_DEVICE_ERROR Some device errors happen. 711 712 **/ 713 EFI_STATUS 714 ReadSectors ( 715 IN ATAPI_BLK_IO_DEV *AtapiBlkIoDev, 716 IN UINTN DevicePosition, 717 IN VOID *Buffer, 718 IN EFI_PEI_LBA StartLba, 719 IN UINTN NumberOfBlocks, 720 IN UINTN BlockSize 721 ); 722 723 /** 724 Check if there is media according to sense data. 725 726 @param[in] SenseData Pointer to sense data. 727 @param[in] SenseCounts Count of sense data. 728 729 @retval TRUE No media 730 @retval FALSE Media exists 731 732 **/ 733 BOOLEAN 734 IsNoMedia ( 735 IN ATAPI_REQUEST_SENSE_DATA *SenseData, 736 IN UINTN SenseCounts 737 ); 738 739 /** 740 Check if device state is unclear according to sense data. 741 742 @param[in] SenseData Pointer to sense data. 743 @param[in] SenseCounts Count of sense data. 744 745 @retval TRUE Device state is unclear 746 @retval FALSE Device state is clear 747 748 **/ 749 BOOLEAN 750 IsDeviceStateUnclear ( 751 IN ATAPI_REQUEST_SENSE_DATA *SenseData, 752 IN UINTN SenseCounts 753 ); 754 755 /** 756 Check if there is media error according to sense data. 757 758 @param[in] SenseData Pointer to sense data. 759 @param[in] SenseCounts Count of sense data. 760 761 @retval TRUE Media error 762 @retval FALSE No media error 763 764 **/ 765 BOOLEAN 766 IsMediaError ( 767 IN ATAPI_REQUEST_SENSE_DATA *SenseData, 768 IN UINTN SenseCounts 769 ); 770 771 /** 772 Check if drive is ready according to sense data. 773 774 @param[in] SenseData Pointer to sense data. 775 @param[in] SenseCounts Count of sense data. 776 @param[out] NeedRetry Indicate if retry is needed. 777 778 @retval TRUE Drive ready 779 @retval FALSE Drive not ready 780 781 **/ 782 BOOLEAN 783 IsDriveReady ( 784 IN ATAPI_REQUEST_SENSE_DATA *SenseData, 785 IN UINTN SenseCounts, 786 OUT BOOLEAN *NeedRetry 787 ); 788 789 #endif 790