1/* 2 * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved. 3 * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved. 4 * 5 * SPDX-License-Identifier: BSD-3-Clause 6 */ 7 8#include <arch.h> 9#include <asm_macros.S> 10#include <common/bl_common.h> 11#include <common/runtime_svc.h> 12#include <cortex_a57.h> 13#include <platform_def.h> 14 15#include "rcar_def.h" 16 17 .globl plat_get_my_entrypoint 18 .extern plat_set_my_stack 19 .globl platform_mem_init 20 21 .globl plat_crash_console_init 22 .globl plat_crash_console_putc 23 .globl plat_crash_console_flush 24 .globl plat_invalidate_icache 25 .globl plat_report_exception 26 .globl plat_secondary_reset 27 .globl plat_reset_handler 28 .globl plat_my_core_pos 29 .extern rcar_log_init 30 31 .extern console_rcar_init 32 .extern console_rcar_putc 33 .extern console_rcar_flush 34 35#if IMAGE_BL2 36 #define INT_ID_MASK (0x3ff) 37 .extern bl2_interrupt_error_type 38 .extern bl2_interrupt_error_id 39 .globl bl2_enter_bl31 40 .extern gicv2_acknowledge_interrupt 41 .extern rcar_swdt_exec 42#endif 43 44 /* ----------------------------------------------------- 45 * void platform_get_core_pos (mpidr) 46 * ----------------------------------------------------- 47 */ 48func platform_get_core_pos 49 and x1, x0, #MPIDR_CPU_MASK 50 and x0, x0, #MPIDR_CLUSTER_MASK 51 add x0, x1, x0, LSR #6 52 ret 53endfunc platform_get_core_pos 54 55 /* ----------------------------------------------------- 56 * void platform_my_core_pos 57 * ----------------------------------------------------- 58 */ 59func plat_my_core_pos 60 mrs x0, mpidr_el1 61 b platform_get_core_pos 62endfunc plat_my_core_pos 63 64 /* ----------------------------------------------------- 65 * void platform_get_my_entrypoint (unsigned int mpid); 66 * 67 * Main job of this routine is to distinguish between 68 * a cold and warm boot. 69 * On a cold boot the secondaries first wait for the 70 * platform to be initialized after which they are 71 * hotplugged in. The primary proceeds to perform the 72 * platform initialization. 73 * On a warm boot, each cpu jumps to the address in its 74 * mailbox. 75 * 76 * TODO: Not a good idea to save lr in a temp reg 77 * ----------------------------------------------------- 78 */ 79func plat_get_my_entrypoint 80 mrs x0, mpidr_el1 81 mov x9, x30 /* lr */ 82 83#if defined(IMAGE_BL2) 84 /* always cold boot on bl2 */ 85 mov x0, #0 86 ret x9 87#else 88 ldr x1, =BOOT_KIND_BASE 89 ldr x21, [x1] 90 91 /* Check the reset info */ 92 and x1, x21, #0x000c 93 cmp x1, #0x0008 94 beq el3_panic 95 cmp x1, #0x000c 96 beq el3_panic 97 98 /* Check the boot kind */ 99 and x1, x21, #0x0003 100 cmp x1, #0x0002 101 beq el3_panic 102 cmp x1, #0x0003 103 beq el3_panic 104 105 /* warm boot or cold boot */ 106 and x1, x21, #1 107 cmp x1, #0 108 bne warm_reset 109 110 /* Cold boot */ 111 mov x0, #0 112 b exit 113 114warm_reset: 115 /* -------------------------------------------------------------------- 116 * A per-cpu mailbox is maintained in the trusted SDRAM. Its flushed out 117 * of the caches after every update using normal memory so its safe to 118 * read it here with SO attributes 119 * --------------------------------------------------------------------- 120 */ 121 ldr x10, =MBOX_BASE 122 bl platform_get_core_pos 123 lsl x0, x0, #CACHE_WRITEBACK_SHIFT 124 ldr x0, [x10, x0] 125 cbz x0, _panic 126exit: 127 ret x9 128_panic: 129 b do_panic 130#endif 131 132endfunc plat_get_my_entrypoint 133 134 /* --------------------------------------------- 135 * plat_secondary_reset 136 * 137 * --------------------------------------------- 138 */ 139func plat_secondary_reset 140 mrs x0, sctlr_el3 141 bic x0, x0, #SCTLR_EE_BIT 142 msr sctlr_el3, x0 143 isb 144 145 mrs x0, cptr_el3 146 bic w0, w0, #TCPAC_BIT 147 bic w0, w0, #TTA_BIT 148 bic w0, w0, #TFP_BIT 149 msr cptr_el3, x0 150 151 mov_imm x0, PARAMS_BASE 152 mov_imm x2, BL31_BASE 153 ldr x3, =BOOT_KIND_BASE 154 mov x1, #0x1 155 str x1, [x3] 156 br x2 /* jump to BL31 */ 157 nop 158 nop 159 nop 160endfunc plat_secondary_reset 161 162 /* --------------------------------------------- 163 * plat_enter_bl31 164 * 165 * --------------------------------------------- 166 */ 167func bl2_enter_bl31 168 mov x20, x0 169 /* 170 * MMU needs to be disabled because both BL2 and BL31 execute 171 * in EL3, and therefore share the same address space. 172 * BL31 will initialize the address space according to its 173 * own requirement. 174 */ 175#if RCAR_BL2_DCACHE == 1 176 /* Disable mmu and data cache */ 177 bl disable_mmu_el3 178 /* Data cache clean and invalidate */ 179 mov x0, #DCCISW 180 bl dcsw_op_all 181 /* TLB invalidate all, EL3 */ 182 tlbi alle3 183#endif /* RCAR_BL2_DCACHE == 1 */ 184 bl disable_mmu_icache_el3 185 /* Invalidate instruction cache */ 186 ic iallu 187 dsb sy 188 isb 189 ldp x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET] 190 msr elr_el3, x0 191 msr spsr_el3, x1 192 exception_return 193endfunc bl2_enter_bl31 194 195 /* ----------------------------------------------------- 196 * void platform_mem_init (void); 197 * 198 * Zero out the mailbox registers in the shared memory 199 * and set the rcar_boot_kind_flag. 200 * The mmu is turned off right now and only the primary can 201 * ever execute this code. Secondaries will read the 202 * mailboxes using SO accesses. 203 * ----------------------------------------------------- 204 */ 205func platform_mem_init 206#if !IMAGE_BL2 207 ldr x0, =MBOX_BASE 208 mov w1, #PLATFORM_CORE_COUNT 209loop: 210 str xzr, [x0], #CACHE_WRITEBACK_GRANULE 211 subs w1, w1, #1 212 b.gt loop 213#endif 214 ret 215endfunc platform_mem_init 216 217 /* --------------------------------------------- 218 * void plat_report_exception(unsigned int type) 219 * Function to report an unhandled exception 220 * with platform-specific means. 221 * --------------------------------------------- 222 */ 223func plat_report_exception 224 /* Switch to SP_EL0 */ 225 msr spsel, #0 226#if IMAGE_BL2 227 mov w1, #FIQ_SP_EL0 228 cmp w0, w1 229 beq rep_exec_fiq_elx 230 b rep_exec_panic_type 231rep_exec_fiq_elx: 232 bl gicv2_acknowledge_interrupt 233 mov x2, #INT_ID_MASK 234 and x0, x0, x2 235 mov x1, #ARM_IRQ_SEC_WDT 236 cmp x0, x1 237 bne rep_exec_panic_id 238 mrs x0, ELR_EL3 239 b rcar_swdt_exec 240rep_exec_panic_type: 241 /* x0 is interrupt TYPE */ 242 b bl2_interrupt_error_type 243rep_exec_panic_id: 244 /* x0 is interrupt ID */ 245 b bl2_interrupt_error_id 246rep_exec_end: 247#endif 248 ret 249endfunc plat_report_exception 250 251 /* --------------------------------------------- 252 * int plat_crash_console_init(void) 253 * Function to initialize log area 254 * --------------------------------------------- 255 */ 256func plat_crash_console_init 257#if IMAGE_BL2 258 mov x0, #0 259#else 260 mov x1, sp 261 mov_imm x2, RCAR_CRASH_STACK 262 mov sp, x2 263 str x1, [sp, #-16]! 264 str x30, [sp, #-16]! 265 bl console_rcar_init 266 ldr x30, [sp], #16 267 ldr x1, [sp], #16 268 mov sp, x1 269#endif 270 ret 271endfunc plat_crash_console_init 272 273 /* --------------------------------------------- 274 * int plat_crash_console_putc(int c) 275 * Function to store a character to log area 276 * --------------------------------------------- 277 */ 278func plat_crash_console_putc 279 mov x1, sp 280 mov_imm x2, RCAR_CRASH_STACK 281 mov sp, x2 282 str x1, [sp, #-16]! 283 str x30, [sp, #-16]! 284 str x3, [sp, #-16]! 285 str x4, [sp, #-16]! 286 str x5, [sp, #-16]! 287 bl console_rcar_putc 288 ldr x5, [sp], #16 289 ldr x4, [sp], #16 290 ldr x3, [sp], #16 291 ldr x30, [sp], #16 292 ldr x1, [sp], #16 293 mov sp, x1 294 ret 295endfunc plat_crash_console_putc 296 297 /* --------------------------------------------- 298 * int plat_crash_console_flush() 299 * --------------------------------------------- 300 */ 301func plat_crash_console_flush 302 b console_rcar_flush 303endfunc plat_crash_console_flush 304 305 /* -------------------------------------------------------------------- 306 * void plat_reset_handler(void); 307 * 308 * Before adding code in this function, refer to the guidelines in 309 * docs/firmware-design.md to determine whether the code should reside 310 * within the FIRST_RESET_HANDLER_CALL block or not. 311 * 312 * For R-Car H3: 313 * - Set the L2 Tag RAM latency to 2 (i.e. 3 cycles) for Cortex-A57 314 * - Set the L2 Data setup latency to 1 (i.e. 1 cycles) for Cortex-A57 315 * - Set the L2 Data RAM latency to 3 (i.e. 4 cycles) for Cortex-A57 316 * For R-Car M3/M3N: 317 * - Set the L2 Tag RAM latency to 2 (i.e. 3 cycles) for Cortex-A57 318 * - Set the L2 Data setup latency to 0 (i.e. 0 cycles) for Cortex-A57 319 * - Set the L2 Data RAM latency to 3 (i.e. 4 cycles) for Cortex-A57 320 * 321 * -------------------------------------------------------------------- 322 */ 323func plat_reset_handler 324 /* 325 * On R-Car H3 : x2 := 0 326 * On R-Car M3/M3N: x2 := 1 327 */ 328 /* read PRR */ 329 ldr x0, =0xFFF00044 330 ldr w0, [x0] 331 ubfx w0, w0, 8, 8 332 /* H3? */ 333 cmp w0, #0x4F 334 b.eq RCARH3 335 /* set R-Car M3/M3N */ 336 mov x2, #1 337 b CHK_A5x 338RCARH3: 339 /* set R-Car H3 */ 340 mov x2, #0 341 /* -------------------------------------------------------------------- 342 * Determine whether this code is executed on a Cortex-A53 or on a 343 * Cortex-A57 core. 344 * -------------------------------------------------------------------- 345 */ 346CHK_A5x: 347 mrs x0, midr_el1 348 ubfx x1, x0, MIDR_PN_SHIFT, #12 349 cmp w1, #((CORTEX_A57_MIDR >> MIDR_PN_SHIFT) & MIDR_PN_MASK) 350 b.eq A57 351 ret 352A57: 353 /* Get data from CORTEX_A57_L2CTLR_EL1 */ 354 mrs x0, CORTEX_A57_L2CTLR_EL1 355 /* 356 * On R-Car H3/M3/M3N 357 * 358 * L2 Tag RAM latency is bit8-6 of CORTEX_A57_L2CTLR_EL1 359 * L2 Data RAM setup is bit5 of CORTEX_A57_L2CTLR_EL1 360 * L2 Data RAM latency is bit2-0 of CORTEX_A57_L2CTLR_EL1 361 */ 362 /* clear bit of L2 RAM */ 363 /* ~(0x1e7) -> x1 */ 364 mov x1, #0x1e7 365 neg x1, x1 366 /* clear bit of L2 RAM -> x0 */ 367 and x0, x0, x1 368 /* L2 Tag RAM latency (3 cycles) */ 369 orr x0, x0, #0x2 << 6 370 /* If M3/M3N then L2 RAM setup is 0 */ 371 cbnz x2, M3_L2 372 /* L2 Data RAM setup (1 cycle) */ 373 orr x0, x0, #0x1 << 5 374M3_L2: 375 /* L2 Data RAM latency (4 cycles) */ 376 orr x0, x0, #0x3 377 /* Store data to L2CTLR_EL1 */ 378 msr CORTEX_A57_L2CTLR_EL1, x0 379apply_l2_ram_latencies: 380 ret 381endfunc plat_reset_handler 382 383 /* --------------------------------------------- 384 * void plat_invalidate_icache(void) 385 * Instruction Cache Invalidate All to PoU 386 * --------------------------------------------- 387 */ 388func plat_invalidate_icache 389 ic iallu 390 391 ret 392endfunc plat_invalidate_icache 393