http://github.com/rtomayko/ronn/tree/0.7.3
.
After parsing and handling options, this bc(1) reads any files given on the command line and executes them before reading from stdin\. .
With all build options, except for extra math, enabled this bc(1) is a drop-in replacement for any bc(1), including (and especially) the GNU bc(1)\. It is also a drop-in replacement for any bc(1) if extra math is enabled, but it will have extra features not found in other bc(1) implementations\. .
-g, --global-stacks Turns the globals ibase, obase, and scale into stacks\. .
This has the effect that a copy of the current value of all three are pushed onto a stack for every function call, as well as popped when every function returns\. This means that functions can assign to any and all of those globals without worrying that the change will affect other functions\. Thus, output(x,b) (in the extended library) could have been written like this: . define void output(x, b) { obase=b; x } . instead of like this: . define void output(x, b) { auto c; c=obase; obase=b; x; obase=c } . This makes writing functions much easier\. . However, since using this flag means that functions cannot set ibase, obase, or scale globally, functions that are made to do so cannot work anymore\. There are two possible use cases for that, and each has a solution\. . First, if a function is called on startup to turn bc(1) into a number converter, it is possible to replace that capability with various shell aliases\. Examples: . alias d2o="bc -e ibase=A -e obase=8"; alias h2b="bc -e ibase=G -e obase=2" . Second, if the purpose of a function is to set ibase, obase, or scale globally for any other purpose, it could be split into one to three functions (based on how many globals it sets) and each of those functions could return the desired value for a global\. . If this behavior is desired for every run of bc(1), then users could make sure to define BC_ENV_ARGS and include this option (see the ENVIRONMENT VARIABLES section for more details)\. . If -s, -w, or any equivalents are used, this option is ignored\. . This is a non-portable extension\. .-h, --help Prints a usage message and quits\. .
-i, --interactive Forces interactive mode\. .
Per the standard https://pubs\.opengroup\.org/onlinepubs/9699919799/utilities/bc\.html, bc(1) has an interactive mode and a non-interactive mode\. The interactive mode is turned on automatically when both stdin and stdout are hooked to a terminal, but this flag can turn it on in other cases\. In interactive mode, bc(1) attempts to recover from errors (see the RESET section), and in normal execution, flushes stdout as soon as execution is done for the current input\. . This is a non-portable extension\. .-l, --mathlib Sets scale (see the Scale section) to 20 and loads the included math library before running any code, including any expressions or files specified on the command line\. .
To learn what is in the library, see the LIBRARY section\. .-P, --no-prompt Disables the prompt in interactive mode\. This is mostly for those users that do not want a prompt or are not used to having them in bc\. Most of those users would want to put this option in BC_ENV_ARGS\. .
If the prompt has been disabled while building bc(1), this option is a no-op\. . This is a non-portable extension\. .-q, --quiet Do not print copyright header\. bc(1) will also suppress the header in non-interactive mode\. .
This is mostly for compatibility with the GNU bc(1) https://www\.gnu\.org/software/bc/\. . This is a non-portable extension\. .-s, --standard Process exactly the language defined by the standard https://pubs\.opengroup\.org/onlinepubs/9699919799/utilities/bc\.html and error if any extensions are used\. .
This is a non-portable extension\. .-v, -V, --version Print the version information (copyright header) and exit\. .
This is a non-portable extension\. .-w, --warn Like -s and --standard, except that warnings (and not errors) are given for non-standard extensions\. .
This is a non-portable extension\. .-e expr, --expression=expr Evaluates expr\. If multiple expressions are given, they are evaluated in order\. If files are given as well (see below), the expressions and files are evaluated in the order given\. This means that if a file is given before an expression, the file is read in and evaluated first\. .
In other bc(1) implementations, this option causes the program to execute the expressions and then exit\. This bc(1) does not, unless the BC_EXPR_EXIT is defined (see the ENVIRONMENT VARIABLES section)\. . This is a non-portable extension\. .-f file, --file=file Reads in file and evaluates it\. If expressions are also given (see above), the expressions are evaluated in the order given\. .
In other bc(1) implementations, this option causes the program to execute the files and then exit\. This bc(1) does not, unless the BC_EXPR_EXIT is defined (see the ENVIRONMENT VARIABLES section)\. . This is a non-portable extension\. .Note: Unlike other bc(1) implementations, this bc(1) will issue a fatal error (see the EXIT STATUS section) if it cannot write to stdout, so if stdout is closed, as in bc <file> >&-, it will quit with an error\. This is done so that bc(1) can report problems when stdout is redirected to a file\. .
If there are scripts that depend on the behavior of other bc(1) implementations, it is recommended that those scripts be changed to redirect stdout to /dev/null\. .
Note: Unlike other bc(1) implementations, this bc(1) will issue a fatal error (see the EXIT STATUS section) if it cannot write to stderr, so if stderr is closed, as in bc <file> 2>&-, it will quit with an error\. This is done so that bc(1) can report problems when stderr is redirected to a file\. .
If there are scripts that depend on the behavior of other bc(1) implementations, it is recommended that those scripts be changed to redirect stderr to /dev/null\. .
In the sections below, E means expression, S means statement, and I means identifier\. .
Identifiers (I) start with a lowercase letter and can be followed by any number (up to BC_NAME_MAX-1) of lowercase letters (a-z), digits (0-9), and underscores (_)\. The regex is [a-z][a-z0-9_]* Identifiers with more than one character (letter) are a non-portable extension\. .
ibase is a global variable determining how to interpret constant numbers\. It is the "input" base, or the number base used for interpreting input numbers\. ibase is initially 10\. If the -s (--standard) and -w (--warn) flags were not given on the command line, the max allowable value for ibase is 36\. Otherwise, it is 16\. The min allowable value for ibase is 2\. The max allowable value for ibase can be queried in bc(1) programs with the maxibase() built in function\. .
obase is a global variable determining how to output results\. It is the "output" base, or the number base used for outputting numbers\. obase is initially 10\. The max allowable value for obase is BC_BASE_MAX\. The min allowable value for obase is 2, unless bc(1) was built with the extra math option\. If it was, then the min allowable value is 0\. In this case, if obase is 0, values are output in scientific notation, and if obase is 1, values are output in engineering notation\. (Outputting in scientific or engineering notation are non-portable extensions\.) The max allowable value for obase can be queried in bc(1) programs with the maxobase() built in function\. .
The scale of an expression is the number of digits in the result of the expression right of the decimal point, and scale is a global variable that sets the precision of any operations, with exceptions\. scale is initially 0\. scale cannot be negative\. The max allowable value for scale can be queried in bc(1) programs with the maxscale() built in function\. .
bc(1) has both global variables and local variables\. All local variables are local to the function; they are parameters or are introduced in the auto list of a function (see FUNCTIONS)\. If a variable is accessed which is not a parameter or in the auto list, it is assumed to be global\. If a parent function has a local variable version of a global variable that is accessed by a function that it calls, the value of that global variable in the child function is the value of the variable in the parent function, not the value of the actual global variable\. .
All of the above applies to arrays as well\. .
The value of a statement that is an expression (i\.e\., any of the Named Expressions or Operands) is printed unless the lowest precedence operator is an assignment operator and the expression is not surrounded by parentheses\. .
The value that is printed is also assigned to the special variable last\. A single dot (\.) may also be used as a synonym for last\. These are non-portable extensions\. .
Either semicolons or newlines may separate statements\. .
.
Number 6 is a non-portable extension\. .
Variables and arrays do not interfere; users can have arrays named the same as variables\. This also applies to functions (see the FUNCTIONS section), so a user can have a variable, array, and function that all have the same name, and they will not shadow each other\. .
Named expressions are required as the operand of increment/decrement operators and as the left side of assignment operators\. .
.
.
Single-character numbers (i\.e\., A) take the value that they would have if they were valid digits, regardless of the value of ibase\. This means that A always equals decimal 10 and Z always equals decimal 35\. .
In addition, if bc(1) was built with the extra math option, it accepts numbers in scientific notation\. For bc(1), an example is 1\.89237e9, which is equal to 1892370000\. Negative exponents are also allowed, so 4\.2890e-3 is equal to 0\.0042890\. .
Using scientific notation is an error or warning if the -s or -w, respectively, command-line options (or equivalents) are given\. .
WARNING: Both the number and the exponent in scientific notation are interpreted according to the current ibase, but the number is still multiplied by 10^exponent regardless of the current ibase\. For example, if ibase is 16 and bc(1) is given the number string "FFeA", the resulting decimal number will be 2550000000000, and if bc(1) is given the number string "10e-4", the resulting decimal number will be 0\.0016\. .
Accepting input as scientific notation is a non-portable extension\. .
++ -- Type: Prefix and Postfix .
Associativity: None . Description: increment, decrement .- ! Type: Prefix .
Associativity: None . Description: negation, boolean not .$ Type: Postfix .
Associativity: None . Description: truncation .@ Type: Binary .
Associativity: Right . Description: set precision .^ Type: Binary .
Associativity: Right . Description: power .* / % Type: Binary .
Associativity: Left . Description: multiply, divide, modulus .+ - Type: Binary .
Associativity: Left . Description: add, subtract .<< >> Type: Binary .
Associativity: Left . Description: shift left, shift right .= <<= >>= += -= *= /= %= ^= @= Type: Binary .
Associativity: Right . Description: assignment .== <= >= != < > Type: Binary .
Associativity: Left . Description: relational .&& Type: Binary .
Associativity: Left . Description: boolean and .|| Type: Binary .
Associativity: Left . Description: boolean or .The operators will be described in more detail below\. .
.
++ -- The prefix and postfix increment and decrement operators behave exactly like they would in C\. They require a named expression as an operand\. .
- The negation operator returns 0 if a user attempts to negate any expression with the value 0\. Otherwise, a copy of the expression with its sign flipped is returned\. .
! The boolean not operator returns 1 if the expression is 0, or 0 otherwise\. .
This is a non-portable extension\. .$ The truncation operator returns a copy of the given expression with all of its scale removed\. .
This is a non-portable extension\. . This is only available if bc(1) has been compiled with the extra math option enabled\. .@ The set precision operator takes two expressions and returns a copy of the first with its scale equal to the value of the second expression\. That could either mean that the number is returned without change (if the scale of the first expression matches the value of the second expression), extended (if it is less), or truncated (if it is more)\. .
The second expression must be an integer (no scale) and non-negative\. . This is a non-portable extension\. . This is only available if bc(1) has been compiled with the extra math option enabled\. .^ The power operator (not the exclusive or operator, as it would be in C) takes two expressions and raises the first to the power of the value of the second\. .
The second expression must be an integer (no scale), and if it is negative, the first value must be non-zero\. .* The multiply operator takes two expressions, multiplies them, and returns the product\. If a is the scale of the first expression and b is the scale of the second expression, the scale of the result is equal to min(a+b,max(scale,a,b)) where min and max return the obvious values\. .
/ The divide operator takes two expressions, divides them, and returns the quotient\. The scale of the result shall be the value of scale\. .
The second expression must be non-zero\. .% The modulus operator takes two expressions, a and b, and evaluates them by 1) Computing a/b to current scale and 2) Using the result of step 1 to calculate a-(a/b)*b to scale max(scale+scale(b),scale(a))\. .
The second expression must be non-zero\. .+ The add operator takes two expressions, a and b, and returns the sum, with a scale equal to the max of the scales of a and b\. .
- The subtract operator takes two expressions, a and b, and returns the difference, with a scale equal to the max of the scales of a and b\. .
<< The left shift operator takes two expressions, a and b, and returns a copy of the value of a with its decimal point moved b places to the right\. .
The second expression must be an integer (no scale) and non-negative\. . This is a non-portable extension\. . This is only available if bc(1) has been compiled with the extra math option enabled\. .>> The right shift operator takes two expressions, a and b, and returns a copy of the value of a with its decimal point moved b places to the left\. .
The second expression must be an integer (no scale) and non-negative\. . This is a non-portable extension\. . This is only available if bc(1) has been compiled with the extra math option enabled\. ..
= <<= >>= += -= *= /= %= ^= @= The assignment operators take two expressions, a and b where a is a named expression\. .
For =, b is copied and the result is assigned to a\. For all others, a and b are applied as operands to the corresponding arithmetic operator and the result is assigned to a\. . The assignment operators that correspond to operators that are extensions are themselves extensions\. . Also, those assignment operators that are extensions are only available if bc(1) has been compiled with the extra math option enabled\. .== <= >= != < > The relational operators compare two expressions, a and b, and if the relation holds, according to C language semantics, the result is 1\. Otherwise, it is 0\. .
Note that unlike in C, these operators have a lower precedence than the assignment operators, which means that a=b>c is interpreted as (a=b)>c\. . Also, unlike the standard https://pubs\.opengroup\.org/onlinepubs/9699919799/utilities/bc\.html requires, these operators can appear anywhere any other expressions can be used\. This allowance is a non-portable extension\. .&& The boolean and operator takes two expressions and returns 1 if both expressions are non-zero, 0 otherwise\. .
This is not a short-circuit operator\. . This is a non-portable extension\. .|| The boolean or operator takes two expressions and returns 1 if one of the expressions is non-zero, 0 otherwise\. .
This is not a short-circuit operator\. . This is a non-portable extension\. .Numbers 4, 9, 11, 12, 14, and 15 are non-portable extensions\. .
Also, as a non-portable extension, any or all of the expressions in the header of a for loop may be omitted\. If the condition (second expression) is omitted, it is assumed to be a constant 1\. .
The break statement causes a loop to stop iterating and resume execution immediately following a loop\. This is only allowed in loops\. .
The continue statement causes a loop iteration to stop early and returns to the start of the loop, including testing the loop condition\. This is only allowed in loops\. .
The if else statement does the same thing as in C\. .
The quit statement causes bc(1) to quit, even if it is on a branch that will not be executed (it is a compile-time command)\. .
The halt statement causes bc(1) to quit, if it is executed\. (Unlike quit if it is on a branch of an if statement that is not executed, bc(1) does not quit\.) .
The limits statement prints the limits that this bc(1) is subject to\. This is like the quit statement in that it is a compile-time command\. .
An expression by itself is evaluated and printed, followed by a newline\. If bc(1) has been built with the extra math option enabled, both scientific notation and engineering notation are available for printing the results of expressions\. Scientific notation is activated by assigning 0 to obase (in any other context, an obase of 0 is invalid), and engineering notation is activated by assigning 1 to obase (which is also invalid in any other context)\. To deactivate them, just assign a different value to obase\. .
Scientific notation and engineering notation are disabled if bc(1) is run with either the -s or -w command-line options (or equivalents)\. .
Printing numbers in scientific notation and/or engineering notation is a non-portable extension\. .
\ea \ea .
\eb \eb .
\e\e \e .
\ee \e .
\ef \ef .
\en \en .
\eq " .
\er \er .
\et \et .
Any other character following a backslash causes the backslash and character to be printed as-is\. .
Any non-string expression in a print statement shall be assigned to last, like any other expression that is printed\. .
This includes function arguments\. Thus, this means that in the expression i = 0; x(i++, i++), the first argument passed to x() is 0, and the second argument is 1, while i is equal to 2 before the function starts executing\. .
define I(I,\.\.\.,I){
auto I,\.\.\.,I
S;\.\.\.;S
return(E)
}
.
.
Any I in the parameter list or auto list may be replaced with I[] to make a parameter or auto var an array\. .
As a non-portable extension, the opening brace of a define statement may appear on the next line\. .
The return statement may also be in the following forms: .
The first two, or not specifying a return statement, is equivalent to return (0), unless the function is a void function\. .
.
define void I(I,\.\.\.,I){
auto I,\.\.\.,I
S;\.\.\.;S
return
}
.
.
They can only be used as standalone expressions, where such an expression would be printed alone, except in a print statement\. .
Void functions can only use the first two return statements listed above\. They can also omit the return statement entirely\. .
The word void is not treated as a keyword; it is still possible to have variables, arrays, and functions named void\. The word void is only treated specially right after the define keyword\. .
This is a non-portable extension\. .
.
*I[] ..
it is a reference\. Any changes to the array in the function are reflected, when the function returns, to the array that was passed in\. .
Other than this, all function arguments are passed by value\. .
This is a non-portable extension\. .
.
s(x) Returns the sine of x, which is assumed to be in radians\. .
This is a transcendental function\. .c(x) Returns the cosine of x, which is assumed to be in radians\. .
This is a transcendental function\. .a(x) Returns the arctangent of x, in radians\. .
This is a transcendental function\. .l(x) Returns the natural logarithm of x\. .
This is a transcendental function\. .e(x) Returns the mathematical constant e raised to the power of x\. .
This is a transcendental function\. .j(x, n) Returns the bessel integer order n (truncated) of x\. .
This is a transcendental function\. ..
However, the extended library is not loaded when the -s/--standard or -w/--warn options are given since they are not part of the library defined by the standard https://pubs\.opengroup\.org/onlinepubs/9699919799/utilities/bc\.html\. .
The extended library is a non-portable extension\. .
r(x, p) Returns x rounded to p decimal places according to the rounding mode round half away from 0 https://en\.wikipedia\.org/wiki/Rounding#Round_half_away_from_zero\. .
ceil(x, p) Returns x rounded to p decimal places according to the rounding mode round away from 0 https://en\.wikipedia\.org/wiki/Rounding#Rounding_away_from_zero\. .
f(x) Returns the factorial of the truncated absolute value of x\. .
perm(n, k) Returns the permutation of the truncated absolute value of n of the truncated absolute value of k, if k <= n\. If not, it returns 0\. .
comb(n, k) Returns the combination of the truncated absolute value of n of the truncated absolute value of k, if k <= n\. If not, it returns 0\. .
l2(x) Returns the logarithm base 2 of x\. .
This is a transcendental function\. .l10(x) Returns the logarithm base 10 of x\. .
This is a transcendental function\. .log(x, b) Returns the logarithm base b of x\. .
This is a transcendental function\. .cbrt(x) Returns the cube root of x\. .
root(x, n) Calculates the truncated value of n, r, and returns the rth root of x to the current scale\. .
If r is 0 or negative, this raises an error and causes bc(1) to reset (see the RESET section)\. It also raises an error and causes bc(1) to reset if r is even and x is negative\. .pi(p) Returns pi to p decimal places\. .
This is a transcendental function\. .t(x) Returns the tangent of x, which is assumed to be in radians\. .
This is a transcendental function\. .a2(y, x) Returns the arctangent of y/x, in radians\. If both y and x are equal to 0, it raises an error and causes bc(1) to reset (see the RESET section)\. Otherwise, if x is greater than 0, it returns a(y/x)\. If x is less than 0, and y is greater than or equal to 0, it returns a(y/x) + pi\. If x is less than 0, and y is less than 0, it returns a(y/x) - pi\. If x is equal to 0, and y is greater than 0, it returns pi/2\. If x is equal to 0, and y is less than 0, it returns -pi/2\. .
This function is the same as the atan2() function in many programming languages\. . This is a transcendental function\. .sin(x) Returns the sine of x, which is assumed to be in radians\. .
This is an alias of s(x)\. . This is a transcendental function\. .cos(x) Returns the cosine of x, which is assumed to be in radians\. .
This is an alias of c(x)\. . This is a transcendental function\. .tan(x) Returns the tangent of x, which is assumed to be in radians\. .
If x is equal to 1 or -1, this raises an error and causes bc(1) to reset (see the RESET section)\. . This is an alias of t(x)\. . This is a transcendental function\. .atan(x) Returns the arctangent of x, in radians\. .
This is an alias of a(x)\. . This is a transcendental function\. .atan2(y, x) Returns the arctangent of y/x, in radians\. If both y and x are equal to 0, it raises an error and causes bc(1) to reset (see the RESET section)\. Otherwise, if x is greater than 0, it returns a(y/x)\. If x is less than 0, and y is greater than or equal to 0, it returns a(y/x) + pi\. If x is less than 0, and y is less than 0, it returns a(y/x) - pi\. If x is equal to 0, and y is greater than 0, it returns pi/2\. If x is equal to 0, and y is less than 0, it returns -pi/2\. .
This function is the same as the atan2() function in many programming languages\. . This is an alias of a2(y, x)\. . This is a transcendental function\. .r2d(x) Converts x from radians to degrees and returns the result\. .
This is a transcendental function\. .d2r(x) Converts x from degrees to radians and returns the result\. .
This is a transcendental function\. .ubytes(x) Returns the numbers of unsigned integer bytes required to hold the truncated absolute value of x\. .
sbytes(x) Returns the numbers of signed, two\'s-complement integer bytes required to hold the truncated value of x\. .
hex(x) Outputs the hexadecimal (base 16) representation of x\. .
This is a void function\. .binary(x) Outputs the binary (base 2) representation of x\. .
This is a void function\. .output(x, b) Outputs the base b representation of x\. .
This is a void function\. .uint(x) Outputs the representation, in binary and hexadecimal, of x as an unsigned integer in as few power of two bytes as possible\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer or is negative, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .int(x) Outputs the representation, in binary and hexadecimal, of x as a signed, two\'s-complement integer in as few power of two bytes as possible\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .uintn(x, n) Outputs the representation, in binary and hexadecimal, of x as an unsigned integer in n bytes\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer, is negative, or cannot fit into n bytes, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .intn(x, n) Outputs the representation, in binary and hexadecimal, of x as a signed, two\'s-complement integer in n bytes\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer or cannot fit into n bytes, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .uint8(x) Outputs the representation, in binary and hexadecimal, of x as an unsigned integer in 1 byte\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer, is negative, or cannot fit into 1 byte, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .int8(x) Outputs the representation, in binary and hexadecimal, of x as a signed, two\'s-complement integer in 1 byte\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer or cannot fit into 1 byte, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .uint16(x) Outputs the representation, in binary and hexadecimal, of x as an unsigned integer in 2 bytes\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer, is negative, or cannot fit into 2 bytes, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .int16(x) Outputs the representation, in binary and hexadecimal, of x as a signed, two\'s-complement integer in 2 bytes\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer or cannot fit into 2 bytes, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .uint32(x) Outputs the representation, in binary and hexadecimal, of x as an unsigned integer in 4 bytes\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer, is negative, or cannot fit into 4 bytes, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .int32(x) Outputs the representation, in binary and hexadecimal, of x as a signed, two\'s-complement integer in 4 bytes\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer or cannot fit into 4 bytes, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .uint64(x) Outputs the representation, in binary and hexadecimal, of x as an unsigned integer in 8 bytes\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer, is negative, or cannot fit into 8 bytes, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .int64(x) Outputs the representation, in binary and hexadecimal, of x as a signed, two\'s-complement integer in 8 bytes\. Both outputs are split into bytes separated by spaces\. .
If x is not an integer or cannot fit into 8 bytes, an error message is printed instead, but bc(1) is not reset (see the RESET section)\. . This is a void function\. .hex_uint(x, n) Outputs the representation of the truncated absolute value of x as an unsigned integer in hexadecimal using n bytes\. Not all of the value will be output if n is too small\. .
This is a void function\. .binary_uint(x, n) Outputs the representation of the truncated absolute value of x as an unsigned integer in binary using n bytes\. Not all of the value will be output if n is too small\. .
This is a void function\. .output_uint(x, n) Outputs the representation of the truncated absolute value of x as an unsigned integer in the current obase using n bytes\. Not all of the value will be output if n is too small\. .
This is a void function\. .output_byte(x, i) Outputs byte i of the truncated absolute value of x, where 0 is the least significant byte and number_of_bytes - 1 is the most significant byte\. .
This is a void function\. ..
Because of the possible inaccuracy, I recommend that users call those functions with the precision (scale) set to at least 1 higher than is necessary\. If exact results are absolutely required, users can double the precision (scale) and then truncate\. .
The transcendental functions in the standard math library are: .
The transcendental functions in the extended math library are: .
First, any functions that are executing are stopped and popped off the stack\. The behavior is not unlike that of exceptions in programming languages\. Then the execution point is set so that any code waiting to execute (after all functions returned) is skipped\. .
Thus, when bc(1) resets, it skips any remaining code waiting to be executed\. Then, if it is interactive mode, and the error was not a fatal error (see the EXIT STATUS section), it asks for more input; otherwise, it exits with the appropriate return code\. .
Note that this reset behavior is different from the GNU bc(1), which attempts to start executing the statement right after the one that caused an error\. .
It uses large integers to calculate more than 1 decimal digit at a time\. If built in a environment where BC_LONG_BIT (see the LIMITS section) is 64, then each integer has 9 decimal digits\. If built in an environment where BC_LONG_BIT is 32 then each integer has 4 decimal digits\. This value (the number of decimal digits per large integer) is called BC_BASE_DIGS\. .
In addition, this bc(1) uses an even larger integer for overflow checking\. This integer type depends on the value of BC_LONG_BIT, but is always at least twice as large as the integer type used to store digits\. .
BC_LONG_BIT The number of bits in the long type in the environment where bc(1) was built\. This determines how many decimal digits can be stored in a single large integer (see the PERFORMANCE section)\. .
BC_BASE_DIGS The number of decimal digits per large integer (see the PERFORMANCE section)\. Depends on BC_LONG_BIT\. .
BC_BASE_POW The max decimal number that each large integer can store (see BC_BASE_DIGS) plus 1\. Depends on BC_BASE_DIGS\. .
BC_OVERFLOW_MAX The max number that the overflow type (see the PERFORMANCE section) can hold\. Depends on BC_LONG_BIT\. .
BC_BASE_MAX The maximum output base\. Set at BC_BASE_POW\. .
BC_DIM_MAX The maximum size of arrays\. Set at SIZE_MAX-1\. .
BC_SCALE_MAX The maximum scale\. Set at BC_OVERFLOW_MAX-1\. .
BC_STRING_MAX The maximum length of strings\. Set at BC_OVERFLOW_MAX-1\. .
BC_NAME_MAX The maximum length of identifiers\. Set at BC_OVERFLOW_MAX-1\. .
BC_NUM_MAX The maximum length of a number (in decimal digits), which includes digits after the decimal point\. Set at BC_OVERFLOW_MAX-1\. .
Exponent The maximum allowable exponent (positive or negative)\. Set at BC_OVERFLOW_MAX\. .
Number of vars The maximum number of vars/arrays\. Set at SIZE_MAX-1\. .
Actual values can be queried with the limits statement\. .
These limits are meant to be effectively non-existent; the limits are so large (at least on 64-bit machines) that there should not be any point at which they become a problem\. In fact, memory should be exhausted before these limits should be hit\. .
POSIXLY_CORRECT If this variable exists (no matter the contents), bc(1) behaves as if the -s option was given\. .
BC_ENV_ARGS This is another way to give command-line arguments to bc(1)\. They should be in the same format as all other command-line arguments\. These are always processed first, so any files given in BC_ENV_ARGS will be processed before files given on the command-line\. This gives the user the ability to set up "standard" options and files to be used at every invocation\. The most useful thing for such files to contain would be useful functions that the user might want every time bc(1) runs\. .
BC_LINE_LENGTH If this environment variable exists and contains an integer that is greater than 1 and is less than UINT16_MAX (2^16-1), bc(1) will output lines to that length, including the backslash (\e)\. The default line length is 70\. .
BC_EXPR_EXIT If this variable exists (no matter the contents), bc(1) will exit immediately after executing expressions and files given by the -e and/or -f command-line options (and any equivalents)\. .
0 No error\. .
1 A math error occurred\. This follows standard practice of using 1 for expected errors, since math errors will happen in the process of normal execution\. .
Math errors include divide by 0, taking the square root of a negative number, attempting to convert a negative number to a hardware integer, overflow when converting a number to a hardware integer, and attempting to use a non-integer where an integer is required\. . Converting to a hardware integer happens for the second operand of the power (^), places (@), left shift (<<), and right shift (>>) operators and their corresponding assignment operators\. .2 A parse error occurred\. .
Parse errors include unexpected EOF, using an invalid character, failing to find the end of a string or comment, using a token where it is invalid, giving an invalid expression, giving an invalid print statement, giving an invalid function definition, attempting to assign to an expression that is not a named expression, giving an invalid auto list, having a duplicate auto/function parameter, failing to find the end of a code block, attempting to return a value from a void function, attempting to use a variable as a reference, and using any extensions when the option -s or any equivalents were given\. .3 A runtime error occurred\. .
Runtime errors include assigning an invalid number to ibase, obase, or scale; give a bad expression to a read() call, calling read() inside of a read() call, type errors, passing the wrong number of parameters to functions, attempting to call an undefined function, and attempting to use a void function call as a value in an expression\. .4 A fatal error occurred\. .
Fatal errors include memory allocation errors, I/O errors, failing to open files, attempting to use files that do not have only ASCII characters (bc(1) only accepts ASCII characters), attempting to open a directory as a file, and giving invalid command-line options\. .The exit status 4 is special; when a fatal error occurs, bc(1) always exits and returns 4, no matter what mode bc(1) is in\. .
The other statuses will only be returned when bc(1) is not in interactive mode, since bc(1) resets its state (see the RESET section) and accepts more input when one of those errors occurs in interactive mode\. This is also the case when interactive mode is forced by the -i option\. .
These exit statuses allow bc(1) to be used in shell scripting with error checking, and its normal behavior can be forced by using -i\. .
Otherwise, SIGTERM and SIGQUIT cause bc(1) to clean up and exit, and it uses the default handler for all other signals\. .
If bc(1) has not been compiled with signal handling, it uses the default signal handlers for all signals\. .
Note: when bc(1) is built with history support, tabs are converted to 8 spaces\. .
Note that the specification explicitly says that bc(1) only accepts numbers that use a period (\.) as a radix point, regardless of the value of LC_NUMERIC\. .
This bc(1) ships with support for adding error messages for different locales, so it supports LC_MESSAGES\. .