1 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
2 /*
3 * cec - HDMI Consumer Electronics Control public header
4 *
5 * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
6 */
7
8 #ifndef _CEC_UAPI_H
9 #define _CEC_UAPI_H
10
11 #include <linux/types.h>
12 #include <linux/string.h>
13
14 #define CEC_MAX_MSG_SIZE 16
15
16 /**
17 * struct cec_msg - CEC message structure.
18 * @tx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the
19 * driver when the message transmission has finished.
20 * @rx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the
21 * driver when the message was received.
22 * @len: Length in bytes of the message.
23 * @timeout: The timeout (in ms) that is used to timeout CEC_RECEIVE.
24 * Set to 0 if you want to wait forever. This timeout can also be
25 * used with CEC_TRANSMIT as the timeout for waiting for a reply.
26 * If 0, then it will use a 1 second timeout instead of waiting
27 * forever as is done with CEC_RECEIVE.
28 * @sequence: The framework assigns a sequence number to messages that are
29 * sent. This can be used to track replies to previously sent
30 * messages.
31 * @flags: Set to 0.
32 * @msg: The message payload.
33 * @reply: This field is ignored with CEC_RECEIVE and is only used by
34 * CEC_TRANSMIT. If non-zero, then wait for a reply with this
35 * opcode. Set to CEC_MSG_FEATURE_ABORT if you want to wait for
36 * a possible ABORT reply. If there was an error when sending the
37 * msg or FeatureAbort was returned, then reply is set to 0.
38 * If reply is non-zero upon return, then len/msg are set to
39 * the received message.
40 * If reply is zero upon return and status has the
41 * CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to
42 * the received feature abort message.
43 * If reply is zero upon return and status has the
44 * CEC_TX_STATUS_MAX_RETRIES bit set, then no reply was seen at
45 * all. If reply is non-zero for CEC_TRANSMIT and the message is a
46 * broadcast, then -EINVAL is returned.
47 * if reply is non-zero, then timeout is set to 1000 (the required
48 * maximum response time).
49 * @rx_status: The message receive status bits. Set by the driver.
50 * @tx_status: The message transmit status bits. Set by the driver.
51 * @tx_arb_lost_cnt: The number of 'Arbitration Lost' events. Set by the driver.
52 * @tx_nack_cnt: The number of 'Not Acknowledged' events. Set by the driver.
53 * @tx_low_drive_cnt: The number of 'Low Drive Detected' events. Set by the
54 * driver.
55 * @tx_error_cnt: The number of 'Error' events. Set by the driver.
56 */
57 struct cec_msg {
58 __u64 tx_ts;
59 __u64 rx_ts;
60 __u32 len;
61 __u32 timeout;
62 __u32 sequence;
63 __u32 flags;
64 __u8 msg[CEC_MAX_MSG_SIZE];
65 __u8 reply;
66 __u8 rx_status;
67 __u8 tx_status;
68 __u8 tx_arb_lost_cnt;
69 __u8 tx_nack_cnt;
70 __u8 tx_low_drive_cnt;
71 __u8 tx_error_cnt;
72 };
73
74 /**
75 * cec_msg_initiator - return the initiator's logical address.
76 * @msg: the message structure
77 */
cec_msg_initiator(const struct cec_msg * msg)78 static inline __u8 cec_msg_initiator(const struct cec_msg *msg)
79 {
80 return msg->msg[0] >> 4;
81 }
82
83 /**
84 * cec_msg_destination - return the destination's logical address.
85 * @msg: the message structure
86 */
cec_msg_destination(const struct cec_msg * msg)87 static inline __u8 cec_msg_destination(const struct cec_msg *msg)
88 {
89 return msg->msg[0] & 0xf;
90 }
91
92 /**
93 * cec_msg_opcode - return the opcode of the message, -1 for poll
94 * @msg: the message structure
95 */
cec_msg_opcode(const struct cec_msg * msg)96 static inline int cec_msg_opcode(const struct cec_msg *msg)
97 {
98 return msg->len > 1 ? msg->msg[1] : -1;
99 }
100
101 /**
102 * cec_msg_is_broadcast - return true if this is a broadcast message.
103 * @msg: the message structure
104 */
cec_msg_is_broadcast(const struct cec_msg * msg)105 static inline int cec_msg_is_broadcast(const struct cec_msg *msg)
106 {
107 return (msg->msg[0] & 0xf) == 0xf;
108 }
109
110 /**
111 * cec_msg_init - initialize the message structure.
112 * @msg: the message structure
113 * @initiator: the logical address of the initiator
114 * @destination:the logical address of the destination (0xf for broadcast)
115 *
116 * The whole structure is zeroed, the len field is set to 1 (i.e. a poll
117 * message) and the initiator and destination are filled in.
118 */
cec_msg_init(struct cec_msg * msg,__u8 initiator,__u8 destination)119 static inline void cec_msg_init(struct cec_msg *msg,
120 __u8 initiator, __u8 destination)
121 {
122 memset(msg, 0, sizeof(*msg));
123 msg->msg[0] = (initiator << 4) | destination;
124 msg->len = 1;
125 }
126
127 /**
128 * cec_msg_set_reply_to - fill in destination/initiator in a reply message.
129 * @msg: the message structure for the reply
130 * @orig: the original message structure
131 *
132 * Set the msg destination to the orig initiator and the msg initiator to the
133 * orig destination. Note that msg and orig may be the same pointer, in which
134 * case the change is done in place.
135 */
cec_msg_set_reply_to(struct cec_msg * msg,struct cec_msg * orig)136 static inline void cec_msg_set_reply_to(struct cec_msg *msg,
137 struct cec_msg *orig)
138 {
139 /* The destination becomes the initiator and vice versa */
140 msg->msg[0] = (cec_msg_destination(orig) << 4) |
141 cec_msg_initiator(orig);
142 msg->reply = msg->timeout = 0;
143 }
144
145 /* cec_msg flags field */
146 #define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0)
147 #define CEC_MSG_FL_RAW (1 << 1)
148
149 /* cec_msg tx/rx_status field */
150 #define CEC_TX_STATUS_OK (1 << 0)
151 #define CEC_TX_STATUS_ARB_LOST (1 << 1)
152 #define CEC_TX_STATUS_NACK (1 << 2)
153 #define CEC_TX_STATUS_LOW_DRIVE (1 << 3)
154 #define CEC_TX_STATUS_ERROR (1 << 4)
155 #define CEC_TX_STATUS_MAX_RETRIES (1 << 5)
156 #define CEC_TX_STATUS_ABORTED (1 << 6)
157 #define CEC_TX_STATUS_TIMEOUT (1 << 7)
158
159 #define CEC_RX_STATUS_OK (1 << 0)
160 #define CEC_RX_STATUS_TIMEOUT (1 << 1)
161 #define CEC_RX_STATUS_FEATURE_ABORT (1 << 2)
162 #define CEC_RX_STATUS_ABORTED (1 << 3)
163
cec_msg_status_is_ok(const struct cec_msg * msg)164 static inline int cec_msg_status_is_ok(const struct cec_msg *msg)
165 {
166 if (msg->tx_status && !(msg->tx_status & CEC_TX_STATUS_OK))
167 return 0;
168 if (msg->rx_status && !(msg->rx_status & CEC_RX_STATUS_OK))
169 return 0;
170 if (!msg->tx_status && !msg->rx_status)
171 return 0;
172 return !(msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT);
173 }
174
175 #define CEC_LOG_ADDR_INVALID 0xff
176 #define CEC_PHYS_ADDR_INVALID 0xffff
177
178 /*
179 * The maximum number of logical addresses one device can be assigned to.
180 * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
181 * Analog Devices CEC hardware supports 3. So let's go wild and go for 4.
182 */
183 #define CEC_MAX_LOG_ADDRS 4
184
185 /* The logical addresses defined by CEC 2.0 */
186 #define CEC_LOG_ADDR_TV 0
187 #define CEC_LOG_ADDR_RECORD_1 1
188 #define CEC_LOG_ADDR_RECORD_2 2
189 #define CEC_LOG_ADDR_TUNER_1 3
190 #define CEC_LOG_ADDR_PLAYBACK_1 4
191 #define CEC_LOG_ADDR_AUDIOSYSTEM 5
192 #define CEC_LOG_ADDR_TUNER_2 6
193 #define CEC_LOG_ADDR_TUNER_3 7
194 #define CEC_LOG_ADDR_PLAYBACK_2 8
195 #define CEC_LOG_ADDR_RECORD_3 9
196 #define CEC_LOG_ADDR_TUNER_4 10
197 #define CEC_LOG_ADDR_PLAYBACK_3 11
198 #define CEC_LOG_ADDR_BACKUP_1 12
199 #define CEC_LOG_ADDR_BACKUP_2 13
200 #define CEC_LOG_ADDR_SPECIFIC 14
201 #define CEC_LOG_ADDR_UNREGISTERED 15 /* as initiator address */
202 #define CEC_LOG_ADDR_BROADCAST 15 /* as destination address */
203
204 /* The logical address types that the CEC device wants to claim */
205 #define CEC_LOG_ADDR_TYPE_TV 0
206 #define CEC_LOG_ADDR_TYPE_RECORD 1
207 #define CEC_LOG_ADDR_TYPE_TUNER 2
208 #define CEC_LOG_ADDR_TYPE_PLAYBACK 3
209 #define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4
210 #define CEC_LOG_ADDR_TYPE_SPECIFIC 5
211 #define CEC_LOG_ADDR_TYPE_UNREGISTERED 6
212 /*
213 * Switches should use UNREGISTERED.
214 * Processors should use SPECIFIC.
215 */
216
217 #define CEC_LOG_ADDR_MASK_TV (1 << CEC_LOG_ADDR_TV)
218 #define CEC_LOG_ADDR_MASK_RECORD ((1 << CEC_LOG_ADDR_RECORD_1) | \
219 (1 << CEC_LOG_ADDR_RECORD_2) | \
220 (1 << CEC_LOG_ADDR_RECORD_3))
221 #define CEC_LOG_ADDR_MASK_TUNER ((1 << CEC_LOG_ADDR_TUNER_1) | \
222 (1 << CEC_LOG_ADDR_TUNER_2) | \
223 (1 << CEC_LOG_ADDR_TUNER_3) | \
224 (1 << CEC_LOG_ADDR_TUNER_4))
225 #define CEC_LOG_ADDR_MASK_PLAYBACK ((1 << CEC_LOG_ADDR_PLAYBACK_1) | \
226 (1 << CEC_LOG_ADDR_PLAYBACK_2) | \
227 (1 << CEC_LOG_ADDR_PLAYBACK_3))
228 #define CEC_LOG_ADDR_MASK_AUDIOSYSTEM (1 << CEC_LOG_ADDR_AUDIOSYSTEM)
229 #define CEC_LOG_ADDR_MASK_BACKUP ((1 << CEC_LOG_ADDR_BACKUP_1) | \
230 (1 << CEC_LOG_ADDR_BACKUP_2))
231 #define CEC_LOG_ADDR_MASK_SPECIFIC (1 << CEC_LOG_ADDR_SPECIFIC)
232 #define CEC_LOG_ADDR_MASK_UNREGISTERED (1 << CEC_LOG_ADDR_UNREGISTERED)
233
cec_has_tv(__u16 log_addr_mask)234 static inline int cec_has_tv(__u16 log_addr_mask)
235 {
236 return log_addr_mask & CEC_LOG_ADDR_MASK_TV;
237 }
238
cec_has_record(__u16 log_addr_mask)239 static inline int cec_has_record(__u16 log_addr_mask)
240 {
241 return log_addr_mask & CEC_LOG_ADDR_MASK_RECORD;
242 }
243
cec_has_tuner(__u16 log_addr_mask)244 static inline int cec_has_tuner(__u16 log_addr_mask)
245 {
246 return log_addr_mask & CEC_LOG_ADDR_MASK_TUNER;
247 }
248
cec_has_playback(__u16 log_addr_mask)249 static inline int cec_has_playback(__u16 log_addr_mask)
250 {
251 return log_addr_mask & CEC_LOG_ADDR_MASK_PLAYBACK;
252 }
253
cec_has_audiosystem(__u16 log_addr_mask)254 static inline int cec_has_audiosystem(__u16 log_addr_mask)
255 {
256 return log_addr_mask & CEC_LOG_ADDR_MASK_AUDIOSYSTEM;
257 }
258
cec_has_backup(__u16 log_addr_mask)259 static inline int cec_has_backup(__u16 log_addr_mask)
260 {
261 return log_addr_mask & CEC_LOG_ADDR_MASK_BACKUP;
262 }
263
cec_has_specific(__u16 log_addr_mask)264 static inline int cec_has_specific(__u16 log_addr_mask)
265 {
266 return log_addr_mask & CEC_LOG_ADDR_MASK_SPECIFIC;
267 }
268
cec_is_unregistered(__u16 log_addr_mask)269 static inline int cec_is_unregistered(__u16 log_addr_mask)
270 {
271 return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED;
272 }
273
cec_is_unconfigured(__u16 log_addr_mask)274 static inline int cec_is_unconfigured(__u16 log_addr_mask)
275 {
276 return log_addr_mask == 0;
277 }
278
279 /*
280 * Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID
281 * should be disabled (CEC_S_VENDOR_ID)
282 */
283 #define CEC_VENDOR_ID_NONE 0xffffffff
284
285 /* The message handling modes */
286 /* Modes for initiator */
287 #define CEC_MODE_NO_INITIATOR (0x0 << 0)
288 #define CEC_MODE_INITIATOR (0x1 << 0)
289 #define CEC_MODE_EXCL_INITIATOR (0x2 << 0)
290 #define CEC_MODE_INITIATOR_MSK 0x0f
291
292 /* Modes for follower */
293 #define CEC_MODE_NO_FOLLOWER (0x0 << 4)
294 #define CEC_MODE_FOLLOWER (0x1 << 4)
295 #define CEC_MODE_EXCL_FOLLOWER (0x2 << 4)
296 #define CEC_MODE_EXCL_FOLLOWER_PASSTHRU (0x3 << 4)
297 #define CEC_MODE_MONITOR_PIN (0xd << 4)
298 #define CEC_MODE_MONITOR (0xe << 4)
299 #define CEC_MODE_MONITOR_ALL (0xf << 4)
300 #define CEC_MODE_FOLLOWER_MSK 0xf0
301
302 /* Userspace has to configure the physical address */
303 #define CEC_CAP_PHYS_ADDR (1 << 0)
304 /* Userspace has to configure the logical addresses */
305 #define CEC_CAP_LOG_ADDRS (1 << 1)
306 /* Userspace can transmit messages (and thus become follower as well) */
307 #define CEC_CAP_TRANSMIT (1 << 2)
308 /*
309 * Passthrough all messages instead of processing them.
310 */
311 #define CEC_CAP_PASSTHROUGH (1 << 3)
312 /* Supports remote control */
313 #define CEC_CAP_RC (1 << 4)
314 /* Hardware can monitor all messages, not just directed and broadcast. */
315 #define CEC_CAP_MONITOR_ALL (1 << 5)
316 /* Hardware can use CEC only if the HDMI HPD pin is high. */
317 #define CEC_CAP_NEEDS_HPD (1 << 6)
318 /* Hardware can monitor CEC pin transitions */
319 #define CEC_CAP_MONITOR_PIN (1 << 7)
320 /* CEC_ADAP_G_CONNECTOR_INFO is available */
321 #define CEC_CAP_CONNECTOR_INFO (1 << 8)
322
323 /**
324 * struct cec_caps - CEC capabilities structure.
325 * @driver: name of the CEC device driver.
326 * @name: name of the CEC device. @driver + @name must be unique.
327 * @available_log_addrs: number of available logical addresses.
328 * @capabilities: capabilities of the CEC adapter.
329 * @version: version of the CEC adapter framework.
330 */
331 struct cec_caps {
332 char driver[32];
333 char name[32];
334 __u32 available_log_addrs;
335 __u32 capabilities;
336 __u32 version;
337 };
338
339 /**
340 * struct cec_log_addrs - CEC logical addresses structure.
341 * @log_addr: the claimed logical addresses. Set by the driver.
342 * @log_addr_mask: current logical address mask. Set by the driver.
343 * @cec_version: the CEC version that the adapter should implement. Set by the
344 * caller.
345 * @num_log_addrs: how many logical addresses should be claimed. Set by the
346 * caller.
347 * @vendor_id: the vendor ID of the device. Set by the caller.
348 * @flags: flags.
349 * @osd_name: the OSD name of the device. Set by the caller.
350 * @primary_device_type: the primary device type for each logical address.
351 * Set by the caller.
352 * @log_addr_type: the logical address types. Set by the caller.
353 * @all_device_types: CEC 2.0: all device types represented by the logical
354 * address. Set by the caller.
355 * @features: CEC 2.0: The logical address features. Set by the caller.
356 */
357 struct cec_log_addrs {
358 __u8 log_addr[CEC_MAX_LOG_ADDRS];
359 __u16 log_addr_mask;
360 __u8 cec_version;
361 __u8 num_log_addrs;
362 __u32 vendor_id;
363 __u32 flags;
364 char osd_name[15];
365 __u8 primary_device_type[CEC_MAX_LOG_ADDRS];
366 __u8 log_addr_type[CEC_MAX_LOG_ADDRS];
367
368 /* CEC 2.0 */
369 __u8 all_device_types[CEC_MAX_LOG_ADDRS];
370 __u8 features[CEC_MAX_LOG_ADDRS][12];
371 };
372
373 /* Allow a fallback to unregistered */
374 #define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0)
375 /* Passthrough RC messages to the input subsystem */
376 #define CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU (1 << 1)
377 /* CDC-Only device: supports only CDC messages */
378 #define CEC_LOG_ADDRS_FL_CDC_ONLY (1 << 2)
379
380 /**
381 * struct cec_drm_connector_info - tells which drm connector is
382 * associated with the CEC adapter.
383 * @card_no: drm card number
384 * @connector_id: drm connector ID
385 */
386 struct cec_drm_connector_info {
387 __u32 card_no;
388 __u32 connector_id;
389 };
390
391 #define CEC_CONNECTOR_TYPE_NO_CONNECTOR 0
392 #define CEC_CONNECTOR_TYPE_DRM 1
393
394 /**
395 * struct cec_connector_info - tells if and which connector is
396 * associated with the CEC adapter.
397 * @type: connector type (if any)
398 * @drm: drm connector info
399 */
400 struct cec_connector_info {
401 __u32 type;
402 union {
403 struct cec_drm_connector_info drm;
404 __u32 raw[16];
405 };
406 };
407
408 /* Events */
409
410 /* Event that occurs when the adapter state changes */
411 #define CEC_EVENT_STATE_CHANGE 1
412 /*
413 * This event is sent when messages are lost because the application
414 * didn't empty the message queue in time
415 */
416 #define CEC_EVENT_LOST_MSGS 2
417 #define CEC_EVENT_PIN_CEC_LOW 3
418 #define CEC_EVENT_PIN_CEC_HIGH 4
419 #define CEC_EVENT_PIN_HPD_LOW 5
420 #define CEC_EVENT_PIN_HPD_HIGH 6
421 #define CEC_EVENT_PIN_5V_LOW 7
422 #define CEC_EVENT_PIN_5V_HIGH 8
423
424 #define CEC_EVENT_FL_INITIAL_STATE (1 << 0)
425 #define CEC_EVENT_FL_DROPPED_EVENTS (1 << 1)
426
427 /**
428 * struct cec_event_state_change - used when the CEC adapter changes state.
429 * @phys_addr: the current physical address
430 * @log_addr_mask: the current logical address mask
431 * @have_conn_info: if non-zero, then HDMI connector information is available.
432 * This field is only valid if CEC_CAP_CONNECTOR_INFO is set. If that
433 * capability is set and @have_conn_info is zero, then that indicates
434 * that the HDMI connector device is not instantiated, either because
435 * the HDMI driver is still configuring the device or because the HDMI
436 * device was unbound.
437 */
438 struct cec_event_state_change {
439 __u16 phys_addr;
440 __u16 log_addr_mask;
441 __u16 have_conn_info;
442 };
443
444 /**
445 * struct cec_event_lost_msgs - tells you how many messages were lost.
446 * @lost_msgs: how many messages were lost.
447 */
448 struct cec_event_lost_msgs {
449 __u32 lost_msgs;
450 };
451
452 /**
453 * struct cec_event - CEC event structure
454 * @ts: the timestamp of when the event was sent.
455 * @event: the event.
456 * array.
457 * @state_change: the event payload for CEC_EVENT_STATE_CHANGE.
458 * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS.
459 * @raw: array to pad the union.
460 */
461 struct cec_event {
462 __u64 ts;
463 __u32 event;
464 __u32 flags;
465 union {
466 struct cec_event_state_change state_change;
467 struct cec_event_lost_msgs lost_msgs;
468 __u32 raw[16];
469 };
470 };
471
472 /* ioctls */
473
474 /* Adapter capabilities */
475 #define CEC_ADAP_G_CAPS _IOWR('a', 0, struct cec_caps)
476
477 /*
478 * phys_addr is either 0 (if this is the CEC root device)
479 * or a valid physical address obtained from the sink's EDID
480 * as read by this CEC device (if this is a source device)
481 * or a physical address obtained and modified from a sink
482 * EDID and used for a sink CEC device.
483 * If nothing is connected, then phys_addr is 0xffff.
484 * See HDMI 1.4b, section 8.7 (Physical Address).
485 *
486 * The CEC_ADAP_S_PHYS_ADDR ioctl may not be available if that is handled
487 * internally.
488 */
489 #define CEC_ADAP_G_PHYS_ADDR _IOR('a', 1, __u16)
490 #define CEC_ADAP_S_PHYS_ADDR _IOW('a', 2, __u16)
491
492 /*
493 * Configure the CEC adapter. It sets the device type and which
494 * logical types it will try to claim. It will return which
495 * logical addresses it could actually claim.
496 * An error is returned if the adapter is disabled or if there
497 * is no physical address assigned.
498 */
499
500 #define CEC_ADAP_G_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs)
501 #define CEC_ADAP_S_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs)
502
503 /* Transmit/receive a CEC command */
504 #define CEC_TRANSMIT _IOWR('a', 5, struct cec_msg)
505 #define CEC_RECEIVE _IOWR('a', 6, struct cec_msg)
506
507 /* Dequeue CEC events */
508 #define CEC_DQEVENT _IOWR('a', 7, struct cec_event)
509
510 /*
511 * Get and set the message handling mode for this filehandle.
512 */
513 #define CEC_G_MODE _IOR('a', 8, __u32)
514 #define CEC_S_MODE _IOW('a', 9, __u32)
515
516 /* Get the connector info */
517 #define CEC_ADAP_G_CONNECTOR_INFO _IOR('a', 10, struct cec_connector_info)
518
519 /*
520 * The remainder of this header defines all CEC messages and operands.
521 * The format matters since it the cec-ctl utility parses it to generate
522 * code for implementing all these messages.
523 *
524 * Comments ending with 'Feature' group messages for each feature.
525 * If messages are part of multiple features, then the "Has also"
526 * comment is used to list the previously defined messages that are
527 * supported by the feature.
528 *
529 * Before operands are defined a comment is added that gives the
530 * name of the operand and in brackets the variable name of the
531 * corresponding argument in the cec-funcs.h function.
532 */
533
534 /* Messages */
535
536 /* One Touch Play Feature */
537 #define CEC_MSG_ACTIVE_SOURCE 0x82
538 #define CEC_MSG_IMAGE_VIEW_ON 0x04
539 #define CEC_MSG_TEXT_VIEW_ON 0x0d
540
541
542 /* Routing Control Feature */
543
544 /*
545 * Has also:
546 * CEC_MSG_ACTIVE_SOURCE
547 */
548
549 #define CEC_MSG_INACTIVE_SOURCE 0x9d
550 #define CEC_MSG_REQUEST_ACTIVE_SOURCE 0x85
551 #define CEC_MSG_ROUTING_CHANGE 0x80
552 #define CEC_MSG_ROUTING_INFORMATION 0x81
553 #define CEC_MSG_SET_STREAM_PATH 0x86
554
555
556 /* Standby Feature */
557 #define CEC_MSG_STANDBY 0x36
558
559
560 /* One Touch Record Feature */
561 #define CEC_MSG_RECORD_OFF 0x0b
562 #define CEC_MSG_RECORD_ON 0x09
563 /* Record Source Type Operand (rec_src_type) */
564 #define CEC_OP_RECORD_SRC_OWN 1
565 #define CEC_OP_RECORD_SRC_DIGITAL 2
566 #define CEC_OP_RECORD_SRC_ANALOG 3
567 #define CEC_OP_RECORD_SRC_EXT_PLUG 4
568 #define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR 5
569 /* Service Identification Method Operand (service_id_method) */
570 #define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID 0
571 #define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL 1
572 /* Digital Service Broadcast System Operand (dig_bcast_system) */
573 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN 0x00
574 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN 0x01
575 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN 0x02
576 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS 0x08
577 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS 0x09
578 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T 0x0a
579 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE 0x10
580 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT 0x11
581 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T 0x12
582 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C 0x18
583 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S 0x19
584 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2 0x1a
585 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T 0x1b
586 /* Analogue Broadcast Type Operand (ana_bcast_type) */
587 #define CEC_OP_ANA_BCAST_TYPE_CABLE 0
588 #define CEC_OP_ANA_BCAST_TYPE_SATELLITE 1
589 #define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL 2
590 /* Broadcast System Operand (bcast_system) */
591 #define CEC_OP_BCAST_SYSTEM_PAL_BG 0x00
592 #define CEC_OP_BCAST_SYSTEM_SECAM_LQ 0x01 /* SECAM L' */
593 #define CEC_OP_BCAST_SYSTEM_PAL_M 0x02
594 #define CEC_OP_BCAST_SYSTEM_NTSC_M 0x03
595 #define CEC_OP_BCAST_SYSTEM_PAL_I 0x04
596 #define CEC_OP_BCAST_SYSTEM_SECAM_DK 0x05
597 #define CEC_OP_BCAST_SYSTEM_SECAM_BG 0x06
598 #define CEC_OP_BCAST_SYSTEM_SECAM_L 0x07
599 #define CEC_OP_BCAST_SYSTEM_PAL_DK 0x08
600 #define CEC_OP_BCAST_SYSTEM_OTHER 0x1f
601 /* Channel Number Format Operand (channel_number_fmt) */
602 #define CEC_OP_CHANNEL_NUMBER_FMT_1_PART 0x01
603 #define CEC_OP_CHANNEL_NUMBER_FMT_2_PART 0x02
604
605 #define CEC_MSG_RECORD_STATUS 0x0a
606 /* Record Status Operand (rec_status) */
607 #define CEC_OP_RECORD_STATUS_CUR_SRC 0x01
608 #define CEC_OP_RECORD_STATUS_DIG_SERVICE 0x02
609 #define CEC_OP_RECORD_STATUS_ANA_SERVICE 0x03
610 #define CEC_OP_RECORD_STATUS_EXT_INPUT 0x04
611 #define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE 0x05
612 #define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE 0x06
613 #define CEC_OP_RECORD_STATUS_NO_SERVICE 0x07
614 #define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG 0x09
615 #define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR 0x0a
616 #define CEC_OP_RECORD_STATUS_UNSUP_CA 0x0b
617 #define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS 0x0c
618 #define CEC_OP_RECORD_STATUS_CANT_COPY_SRC 0x0d
619 #define CEC_OP_RECORD_STATUS_NO_MORE_COPIES 0x0e
620 #define CEC_OP_RECORD_STATUS_NO_MEDIA 0x10
621 #define CEC_OP_RECORD_STATUS_PLAYING 0x11
622 #define CEC_OP_RECORD_STATUS_ALREADY_RECORDING 0x12
623 #define CEC_OP_RECORD_STATUS_MEDIA_PROT 0x13
624 #define CEC_OP_RECORD_STATUS_NO_SIGNAL 0x14
625 #define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM 0x15
626 #define CEC_OP_RECORD_STATUS_NO_SPACE 0x16
627 #define CEC_OP_RECORD_STATUS_PARENTAL_LOCK 0x17
628 #define CEC_OP_RECORD_STATUS_TERMINATED_OK 0x1a
629 #define CEC_OP_RECORD_STATUS_ALREADY_TERM 0x1b
630 #define CEC_OP_RECORD_STATUS_OTHER 0x1f
631
632 #define CEC_MSG_RECORD_TV_SCREEN 0x0f
633
634
635 /* Timer Programming Feature */
636 #define CEC_MSG_CLEAR_ANALOGUE_TIMER 0x33
637 /* Recording Sequence Operand (recording_seq) */
638 #define CEC_OP_REC_SEQ_SUNDAY 0x01
639 #define CEC_OP_REC_SEQ_MONDAY 0x02
640 #define CEC_OP_REC_SEQ_TUESDAY 0x04
641 #define CEC_OP_REC_SEQ_WEDNESDAY 0x08
642 #define CEC_OP_REC_SEQ_THURSDAY 0x10
643 #define CEC_OP_REC_SEQ_FRIDAY 0x20
644 #define CEC_OP_REC_SEQ_SATERDAY 0x40
645 #define CEC_OP_REC_SEQ_ONCE_ONLY 0x00
646
647 #define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99
648
649 #define CEC_MSG_CLEAR_EXT_TIMER 0xa1
650 /* External Source Specifier Operand (ext_src_spec) */
651 #define CEC_OP_EXT_SRC_PLUG 0x04
652 #define CEC_OP_EXT_SRC_PHYS_ADDR 0x05
653
654 #define CEC_MSG_SET_ANALOGUE_TIMER 0x34
655 #define CEC_MSG_SET_DIGITAL_TIMER 0x97
656 #define CEC_MSG_SET_EXT_TIMER 0xa2
657
658 #define CEC_MSG_SET_TIMER_PROGRAM_TITLE 0x67
659 #define CEC_MSG_TIMER_CLEARED_STATUS 0x43
660 /* Timer Cleared Status Data Operand (timer_cleared_status) */
661 #define CEC_OP_TIMER_CLR_STAT_RECORDING 0x00
662 #define CEC_OP_TIMER_CLR_STAT_NO_MATCHING 0x01
663 #define CEC_OP_TIMER_CLR_STAT_NO_INFO 0x02
664 #define CEC_OP_TIMER_CLR_STAT_CLEARED 0x80
665
666 #define CEC_MSG_TIMER_STATUS 0x35
667 /* Timer Overlap Warning Operand (timer_overlap_warning) */
668 #define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP 0
669 #define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP 1
670 /* Media Info Operand (media_info) */
671 #define CEC_OP_MEDIA_INFO_UNPROT_MEDIA 0
672 #define CEC_OP_MEDIA_INFO_PROT_MEDIA 1
673 #define CEC_OP_MEDIA_INFO_NO_MEDIA 2
674 /* Programmed Indicator Operand (prog_indicator) */
675 #define CEC_OP_PROG_IND_NOT_PROGRAMMED 0
676 #define CEC_OP_PROG_IND_PROGRAMMED 1
677 /* Programmed Info Operand (prog_info) */
678 #define CEC_OP_PROG_INFO_ENOUGH_SPACE 0x08
679 #define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE 0x09
680 #define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE 0x0b
681 #define CEC_OP_PROG_INFO_NONE_AVAILABLE 0x0a
682 /* Not Programmed Error Info Operand (prog_error) */
683 #define CEC_OP_PROG_ERROR_NO_FREE_TIMER 0x01
684 #define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE 0x02
685 #define CEC_OP_PROG_ERROR_REC_SEQ_ERROR 0x03
686 #define CEC_OP_PROG_ERROR_INV_EXT_PLUG 0x04
687 #define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR 0x05
688 #define CEC_OP_PROG_ERROR_CA_UNSUPP 0x06
689 #define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS 0x07
690 #define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP 0x08
691 #define CEC_OP_PROG_ERROR_PARENTAL_LOCK 0x09
692 #define CEC_OP_PROG_ERROR_CLOCK_FAILURE 0x0a
693 #define CEC_OP_PROG_ERROR_DUPLICATE 0x0e
694
695
696 /* System Information Feature */
697 #define CEC_MSG_CEC_VERSION 0x9e
698 /* CEC Version Operand (cec_version) */
699 #define CEC_OP_CEC_VERSION_1_3A 4
700 #define CEC_OP_CEC_VERSION_1_4 5
701 #define CEC_OP_CEC_VERSION_2_0 6
702
703 #define CEC_MSG_GET_CEC_VERSION 0x9f
704 #define CEC_MSG_GIVE_PHYSICAL_ADDR 0x83
705 #define CEC_MSG_GET_MENU_LANGUAGE 0x91
706 #define CEC_MSG_REPORT_PHYSICAL_ADDR 0x84
707 /* Primary Device Type Operand (prim_devtype) */
708 #define CEC_OP_PRIM_DEVTYPE_TV 0
709 #define CEC_OP_PRIM_DEVTYPE_RECORD 1
710 #define CEC_OP_PRIM_DEVTYPE_TUNER 3
711 #define CEC_OP_PRIM_DEVTYPE_PLAYBACK 4
712 #define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM 5
713 #define CEC_OP_PRIM_DEVTYPE_SWITCH 6
714 #define CEC_OP_PRIM_DEVTYPE_PROCESSOR 7
715
716 #define CEC_MSG_SET_MENU_LANGUAGE 0x32
717 #define CEC_MSG_REPORT_FEATURES 0xa6 /* HDMI 2.0 */
718 /* All Device Types Operand (all_device_types) */
719 #define CEC_OP_ALL_DEVTYPE_TV 0x80
720 #define CEC_OP_ALL_DEVTYPE_RECORD 0x40
721 #define CEC_OP_ALL_DEVTYPE_TUNER 0x20
722 #define CEC_OP_ALL_DEVTYPE_PLAYBACK 0x10
723 #define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM 0x08
724 #define CEC_OP_ALL_DEVTYPE_SWITCH 0x04
725 /*
726 * And if you wondering what happened to PROCESSOR devices: those should
727 * be mapped to a SWITCH.
728 */
729
730 /* Valid for RC Profile and Device Feature operands */
731 #define CEC_OP_FEAT_EXT 0x80 /* Extension bit */
732 /* RC Profile Operand (rc_profile) */
733 #define CEC_OP_FEAT_RC_TV_PROFILE_NONE 0x00
734 #define CEC_OP_FEAT_RC_TV_PROFILE_1 0x02
735 #define CEC_OP_FEAT_RC_TV_PROFILE_2 0x06
736 #define CEC_OP_FEAT_RC_TV_PROFILE_3 0x0a
737 #define CEC_OP_FEAT_RC_TV_PROFILE_4 0x0e
738 #define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU 0x50
739 #define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU 0x48
740 #define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU 0x44
741 #define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU 0x42
742 #define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU 0x41
743 /* Device Feature Operand (dev_features) */
744 #define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN 0x40
745 #define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING 0x20
746 #define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL 0x10
747 #define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE 0x08
748 #define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX 0x04
749 #define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02
750
751 #define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */
752
753
754 /* Deck Control Feature */
755 #define CEC_MSG_DECK_CONTROL 0x42
756 /* Deck Control Mode Operand (deck_control_mode) */
757 #define CEC_OP_DECK_CTL_MODE_SKIP_FWD 1
758 #define CEC_OP_DECK_CTL_MODE_SKIP_REV 2
759 #define CEC_OP_DECK_CTL_MODE_STOP 3
760 #define CEC_OP_DECK_CTL_MODE_EJECT 4
761
762 #define CEC_MSG_DECK_STATUS 0x1b
763 /* Deck Info Operand (deck_info) */
764 #define CEC_OP_DECK_INFO_PLAY 0x11
765 #define CEC_OP_DECK_INFO_RECORD 0x12
766 #define CEC_OP_DECK_INFO_PLAY_REV 0x13
767 #define CEC_OP_DECK_INFO_STILL 0x14
768 #define CEC_OP_DECK_INFO_SLOW 0x15
769 #define CEC_OP_DECK_INFO_SLOW_REV 0x16
770 #define CEC_OP_DECK_INFO_FAST_FWD 0x17
771 #define CEC_OP_DECK_INFO_FAST_REV 0x18
772 #define CEC_OP_DECK_INFO_NO_MEDIA 0x19
773 #define CEC_OP_DECK_INFO_STOP 0x1a
774 #define CEC_OP_DECK_INFO_SKIP_FWD 0x1b
775 #define CEC_OP_DECK_INFO_SKIP_REV 0x1c
776 #define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD 0x1d
777 #define CEC_OP_DECK_INFO_INDEX_SEARCH_REV 0x1e
778 #define CEC_OP_DECK_INFO_OTHER 0x1f
779
780 #define CEC_MSG_GIVE_DECK_STATUS 0x1a
781 /* Status Request Operand (status_req) */
782 #define CEC_OP_STATUS_REQ_ON 1
783 #define CEC_OP_STATUS_REQ_OFF 2
784 #define CEC_OP_STATUS_REQ_ONCE 3
785
786 #define CEC_MSG_PLAY 0x41
787 /* Play Mode Operand (play_mode) */
788 #define CEC_OP_PLAY_MODE_PLAY_FWD 0x24
789 #define CEC_OP_PLAY_MODE_PLAY_REV 0x20
790 #define CEC_OP_PLAY_MODE_PLAY_STILL 0x25
791 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN 0x05
792 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED 0x06
793 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX 0x07
794 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN 0x09
795 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED 0x0a
796 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX 0x0b
797 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN 0x15
798 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED 0x16
799 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX 0x17
800 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN 0x19
801 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED 0x1a
802 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX 0x1b
803
804
805 /* Tuner Control Feature */
806 #define CEC_MSG_GIVE_TUNER_DEVICE_STATUS 0x08
807 #define CEC_MSG_SELECT_ANALOGUE_SERVICE 0x92
808 #define CEC_MSG_SELECT_DIGITAL_SERVICE 0x93
809 #define CEC_MSG_TUNER_DEVICE_STATUS 0x07
810 /* Recording Flag Operand (rec_flag) */
811 #define CEC_OP_REC_FLAG_NOT_USED 0
812 #define CEC_OP_REC_FLAG_USED 1
813 /* Tuner Display Info Operand (tuner_display_info) */
814 #define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL 0
815 #define CEC_OP_TUNER_DISPLAY_INFO_NONE 1
816 #define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE 2
817
818 #define CEC_MSG_TUNER_STEP_DECREMENT 0x06
819 #define CEC_MSG_TUNER_STEP_INCREMENT 0x05
820
821
822 /* Vendor Specific Commands Feature */
823
824 /*
825 * Has also:
826 * CEC_MSG_CEC_VERSION
827 * CEC_MSG_GET_CEC_VERSION
828 */
829 #define CEC_MSG_DEVICE_VENDOR_ID 0x87
830 #define CEC_MSG_GIVE_DEVICE_VENDOR_ID 0x8c
831 #define CEC_MSG_VENDOR_COMMAND 0x89
832 #define CEC_MSG_VENDOR_COMMAND_WITH_ID 0xa0
833 #define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN 0x8a
834 #define CEC_MSG_VENDOR_REMOTE_BUTTON_UP 0x8b
835
836
837 /* OSD Display Feature */
838 #define CEC_MSG_SET_OSD_STRING 0x64
839 /* Display Control Operand (disp_ctl) */
840 #define CEC_OP_DISP_CTL_DEFAULT 0x00
841 #define CEC_OP_DISP_CTL_UNTIL_CLEARED 0x40
842 #define CEC_OP_DISP_CTL_CLEAR 0x80
843
844
845 /* Device OSD Transfer Feature */
846 #define CEC_MSG_GIVE_OSD_NAME 0x46
847 #define CEC_MSG_SET_OSD_NAME 0x47
848
849
850 /* Device Menu Control Feature */
851 #define CEC_MSG_MENU_REQUEST 0x8d
852 /* Menu Request Type Operand (menu_req) */
853 #define CEC_OP_MENU_REQUEST_ACTIVATE 0x00
854 #define CEC_OP_MENU_REQUEST_DEACTIVATE 0x01
855 #define CEC_OP_MENU_REQUEST_QUERY 0x02
856
857 #define CEC_MSG_MENU_STATUS 0x8e
858 /* Menu State Operand (menu_state) */
859 #define CEC_OP_MENU_STATE_ACTIVATED 0x00
860 #define CEC_OP_MENU_STATE_DEACTIVATED 0x01
861
862 #define CEC_MSG_USER_CONTROL_PRESSED 0x44
863 /* UI Command Operand (ui_cmd) */
864 #define CEC_OP_UI_CMD_SELECT 0x00
865 #define CEC_OP_UI_CMD_UP 0x01
866 #define CEC_OP_UI_CMD_DOWN 0x02
867 #define CEC_OP_UI_CMD_LEFT 0x03
868 #define CEC_OP_UI_CMD_RIGHT 0x04
869 #define CEC_OP_UI_CMD_RIGHT_UP 0x05
870 #define CEC_OP_UI_CMD_RIGHT_DOWN 0x06
871 #define CEC_OP_UI_CMD_LEFT_UP 0x07
872 #define CEC_OP_UI_CMD_LEFT_DOWN 0x08
873 #define CEC_OP_UI_CMD_DEVICE_ROOT_MENU 0x09
874 #define CEC_OP_UI_CMD_DEVICE_SETUP_MENU 0x0a
875 #define CEC_OP_UI_CMD_CONTENTS_MENU 0x0b
876 #define CEC_OP_UI_CMD_FAVORITE_MENU 0x0c
877 #define CEC_OP_UI_CMD_BACK 0x0d
878 #define CEC_OP_UI_CMD_MEDIA_TOP_MENU 0x10
879 #define CEC_OP_UI_CMD_MEDIA_CONTEXT_SENSITIVE_MENU 0x11
880 #define CEC_OP_UI_CMD_NUMBER_ENTRY_MODE 0x1d
881 #define CEC_OP_UI_CMD_NUMBER_11 0x1e
882 #define CEC_OP_UI_CMD_NUMBER_12 0x1f
883 #define CEC_OP_UI_CMD_NUMBER_0_OR_NUMBER_10 0x20
884 #define CEC_OP_UI_CMD_NUMBER_1 0x21
885 #define CEC_OP_UI_CMD_NUMBER_2 0x22
886 #define CEC_OP_UI_CMD_NUMBER_3 0x23
887 #define CEC_OP_UI_CMD_NUMBER_4 0x24
888 #define CEC_OP_UI_CMD_NUMBER_5 0x25
889 #define CEC_OP_UI_CMD_NUMBER_6 0x26
890 #define CEC_OP_UI_CMD_NUMBER_7 0x27
891 #define CEC_OP_UI_CMD_NUMBER_8 0x28
892 #define CEC_OP_UI_CMD_NUMBER_9 0x29
893 #define CEC_OP_UI_CMD_DOT 0x2a
894 #define CEC_OP_UI_CMD_ENTER 0x2b
895 #define CEC_OP_UI_CMD_CLEAR 0x2c
896 #define CEC_OP_UI_CMD_NEXT_FAVORITE 0x2f
897 #define CEC_OP_UI_CMD_CHANNEL_UP 0x30
898 #define CEC_OP_UI_CMD_CHANNEL_DOWN 0x31
899 #define CEC_OP_UI_CMD_PREVIOUS_CHANNEL 0x32
900 #define CEC_OP_UI_CMD_SOUND_SELECT 0x33
901 #define CEC_OP_UI_CMD_INPUT_SELECT 0x34
902 #define CEC_OP_UI_CMD_DISPLAY_INFORMATION 0x35
903 #define CEC_OP_UI_CMD_HELP 0x36
904 #define CEC_OP_UI_CMD_PAGE_UP 0x37
905 #define CEC_OP_UI_CMD_PAGE_DOWN 0x38
906 #define CEC_OP_UI_CMD_POWER 0x40
907 #define CEC_OP_UI_CMD_VOLUME_UP 0x41
908 #define CEC_OP_UI_CMD_VOLUME_DOWN 0x42
909 #define CEC_OP_UI_CMD_MUTE 0x43
910 #define CEC_OP_UI_CMD_PLAY 0x44
911 #define CEC_OP_UI_CMD_STOP 0x45
912 #define CEC_OP_UI_CMD_PAUSE 0x46
913 #define CEC_OP_UI_CMD_RECORD 0x47
914 #define CEC_OP_UI_CMD_REWIND 0x48
915 #define CEC_OP_UI_CMD_FAST_FORWARD 0x49
916 #define CEC_OP_UI_CMD_EJECT 0x4a
917 #define CEC_OP_UI_CMD_SKIP_FORWARD 0x4b
918 #define CEC_OP_UI_CMD_SKIP_BACKWARD 0x4c
919 #define CEC_OP_UI_CMD_STOP_RECORD 0x4d
920 #define CEC_OP_UI_CMD_PAUSE_RECORD 0x4e
921 #define CEC_OP_UI_CMD_ANGLE 0x50
922 #define CEC_OP_UI_CMD_SUB_PICTURE 0x51
923 #define CEC_OP_UI_CMD_VIDEO_ON_DEMAND 0x52
924 #define CEC_OP_UI_CMD_ELECTRONIC_PROGRAM_GUIDE 0x53
925 #define CEC_OP_UI_CMD_TIMER_PROGRAMMING 0x54
926 #define CEC_OP_UI_CMD_INITIAL_CONFIGURATION 0x55
927 #define CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE 0x56
928 #define CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION 0x57
929 #define CEC_OP_UI_CMD_AUDIO_DESCRIPTION 0x58
930 #define CEC_OP_UI_CMD_INTERNET 0x59
931 #define CEC_OP_UI_CMD_3D_MODE 0x5a
932 #define CEC_OP_UI_CMD_PLAY_FUNCTION 0x60
933 #define CEC_OP_UI_CMD_PAUSE_PLAY_FUNCTION 0x61
934 #define CEC_OP_UI_CMD_RECORD_FUNCTION 0x62
935 #define CEC_OP_UI_CMD_PAUSE_RECORD_FUNCTION 0x63
936 #define CEC_OP_UI_CMD_STOP_FUNCTION 0x64
937 #define CEC_OP_UI_CMD_MUTE_FUNCTION 0x65
938 #define CEC_OP_UI_CMD_RESTORE_VOLUME_FUNCTION 0x66
939 #define CEC_OP_UI_CMD_TUNE_FUNCTION 0x67
940 #define CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION 0x68
941 #define CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION 0x69
942 #define CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION 0x6a
943 #define CEC_OP_UI_CMD_POWER_TOGGLE_FUNCTION 0x6b
944 #define CEC_OP_UI_CMD_POWER_OFF_FUNCTION 0x6c
945 #define CEC_OP_UI_CMD_POWER_ON_FUNCTION 0x6d
946 #define CEC_OP_UI_CMD_F1_BLUE 0x71
947 #define CEC_OP_UI_CMD_F2_RED 0x72
948 #define CEC_OP_UI_CMD_F3_GREEN 0x73
949 #define CEC_OP_UI_CMD_F4_YELLOW 0x74
950 #define CEC_OP_UI_CMD_F5 0x75
951 #define CEC_OP_UI_CMD_DATA 0x76
952 /* UI Broadcast Type Operand (ui_bcast_type) */
953 #define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL 0x00
954 #define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA 0x01
955 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE 0x10
956 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T 0x20
957 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE 0x30
958 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT 0x40
959 #define CEC_OP_UI_BCAST_TYPE_DIGITAL 0x50
960 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_T 0x60
961 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE 0x70
962 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT 0x80
963 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT 0x90
964 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2 0x91
965 #define CEC_OP_UI_BCAST_TYPE_IP 0xa0
966 /* UI Sound Presentation Control Operand (ui_snd_pres_ctl) */
967 #define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO 0x10
968 #define CEC_OP_UI_SND_PRES_CTL_KARAOKE 0x20
969 #define CEC_OP_UI_SND_PRES_CTL_DOWNMIX 0x80
970 #define CEC_OP_UI_SND_PRES_CTL_REVERB 0x90
971 #define CEC_OP_UI_SND_PRES_CTL_EQUALIZER 0xa0
972 #define CEC_OP_UI_SND_PRES_CTL_BASS_UP 0xb1
973 #define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL 0xb2
974 #define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN 0xb3
975 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP 0xc1
976 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL 0xc2
977 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN 0xc3
978
979 #define CEC_MSG_USER_CONTROL_RELEASED 0x45
980
981
982 /* Remote Control Passthrough Feature */
983
984 /*
985 * Has also:
986 * CEC_MSG_USER_CONTROL_PRESSED
987 * CEC_MSG_USER_CONTROL_RELEASED
988 */
989
990
991 /* Power Status Feature */
992 #define CEC_MSG_GIVE_DEVICE_POWER_STATUS 0x8f
993 #define CEC_MSG_REPORT_POWER_STATUS 0x90
994 /* Power Status Operand (pwr_state) */
995 #define CEC_OP_POWER_STATUS_ON 0
996 #define CEC_OP_POWER_STATUS_STANDBY 1
997 #define CEC_OP_POWER_STATUS_TO_ON 2
998 #define CEC_OP_POWER_STATUS_TO_STANDBY 3
999
1000
1001 /* General Protocol Messages */
1002 #define CEC_MSG_FEATURE_ABORT 0x00
1003 /* Abort Reason Operand (reason) */
1004 #define CEC_OP_ABORT_UNRECOGNIZED_OP 0
1005 #define CEC_OP_ABORT_INCORRECT_MODE 1
1006 #define CEC_OP_ABORT_NO_SOURCE 2
1007 #define CEC_OP_ABORT_INVALID_OP 3
1008 #define CEC_OP_ABORT_REFUSED 4
1009 #define CEC_OP_ABORT_UNDETERMINED 5
1010
1011 #define CEC_MSG_ABORT 0xff
1012
1013
1014 /* System Audio Control Feature */
1015
1016 /*
1017 * Has also:
1018 * CEC_MSG_USER_CONTROL_PRESSED
1019 * CEC_MSG_USER_CONTROL_RELEASED
1020 */
1021 #define CEC_MSG_GIVE_AUDIO_STATUS 0x71
1022 #define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d
1023 #define CEC_MSG_REPORT_AUDIO_STATUS 0x7a
1024 /* Audio Mute Status Operand (aud_mute_status) */
1025 #define CEC_OP_AUD_MUTE_STATUS_OFF 0
1026 #define CEC_OP_AUD_MUTE_STATUS_ON 1
1027
1028 #define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR 0xa3
1029 #define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR 0xa4
1030 #define CEC_MSG_SET_SYSTEM_AUDIO_MODE 0x72
1031 /* System Audio Status Operand (sys_aud_status) */
1032 #define CEC_OP_SYS_AUD_STATUS_OFF 0
1033 #define CEC_OP_SYS_AUD_STATUS_ON 1
1034
1035 #define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST 0x70
1036 #define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS 0x7e
1037 /* Audio Format ID Operand (audio_format_id) */
1038 #define CEC_OP_AUD_FMT_ID_CEA861 0
1039 #define CEC_OP_AUD_FMT_ID_CEA861_CXT 1
1040
1041
1042 /* Audio Rate Control Feature */
1043 #define CEC_MSG_SET_AUDIO_RATE 0x9a
1044 /* Audio Rate Operand (audio_rate) */
1045 #define CEC_OP_AUD_RATE_OFF 0
1046 #define CEC_OP_AUD_RATE_WIDE_STD 1
1047 #define CEC_OP_AUD_RATE_WIDE_FAST 2
1048 #define CEC_OP_AUD_RATE_WIDE_SLOW 3
1049 #define CEC_OP_AUD_RATE_NARROW_STD 4
1050 #define CEC_OP_AUD_RATE_NARROW_FAST 5
1051 #define CEC_OP_AUD_RATE_NARROW_SLOW 6
1052
1053
1054 /* Audio Return Channel Control Feature */
1055 #define CEC_MSG_INITIATE_ARC 0xc0
1056 #define CEC_MSG_REPORT_ARC_INITIATED 0xc1
1057 #define CEC_MSG_REPORT_ARC_TERMINATED 0xc2
1058 #define CEC_MSG_REQUEST_ARC_INITIATION 0xc3
1059 #define CEC_MSG_REQUEST_ARC_TERMINATION 0xc4
1060 #define CEC_MSG_TERMINATE_ARC 0xc5
1061
1062
1063 /* Dynamic Audio Lipsync Feature */
1064 /* Only for CEC 2.0 and up */
1065 #define CEC_MSG_REQUEST_CURRENT_LATENCY 0xa7
1066 #define CEC_MSG_REPORT_CURRENT_LATENCY 0xa8
1067 /* Low Latency Mode Operand (low_latency_mode) */
1068 #define CEC_OP_LOW_LATENCY_MODE_OFF 0
1069 #define CEC_OP_LOW_LATENCY_MODE_ON 1
1070 /* Audio Output Compensated Operand (audio_out_compensated) */
1071 #define CEC_OP_AUD_OUT_COMPENSATED_NA 0
1072 #define CEC_OP_AUD_OUT_COMPENSATED_DELAY 1
1073 #define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY 2
1074 #define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY 3
1075
1076
1077 /* Capability Discovery and Control Feature */
1078 #define CEC_MSG_CDC_MESSAGE 0xf8
1079 /* Ethernet-over-HDMI: nobody ever does this... */
1080 #define CEC_MSG_CDC_HEC_INQUIRE_STATE 0x00
1081 #define CEC_MSG_CDC_HEC_REPORT_STATE 0x01
1082 /* HEC Functionality State Operand (hec_func_state) */
1083 #define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED 0
1084 #define CEC_OP_HEC_FUNC_STATE_INACTIVE 1
1085 #define CEC_OP_HEC_FUNC_STATE_ACTIVE 2
1086 #define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD 3
1087 /* Host Functionality State Operand (host_func_state) */
1088 #define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED 0
1089 #define CEC_OP_HOST_FUNC_STATE_INACTIVE 1
1090 #define CEC_OP_HOST_FUNC_STATE_ACTIVE 2
1091 /* ENC Functionality State Operand (enc_func_state) */
1092 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED 0
1093 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE 1
1094 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE 2
1095 /* CDC Error Code Operand (cdc_errcode) */
1096 #define CEC_OP_CDC_ERROR_CODE_NONE 0
1097 #define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED 1
1098 #define CEC_OP_CDC_ERROR_CODE_WRONG_STATE 2
1099 #define CEC_OP_CDC_ERROR_CODE_OTHER 3
1100 /* HEC Support Operand (hec_support) */
1101 #define CEC_OP_HEC_SUPPORT_NO 0
1102 #define CEC_OP_HEC_SUPPORT_YES 1
1103 /* HEC Activation Operand (hec_activation) */
1104 #define CEC_OP_HEC_ACTIVATION_ON 0
1105 #define CEC_OP_HEC_ACTIVATION_OFF 1
1106
1107 #define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT 0x02
1108 #define CEC_MSG_CDC_HEC_SET_STATE 0x03
1109 /* HEC Set State Operand (hec_set_state) */
1110 #define CEC_OP_HEC_SET_STATE_DEACTIVATE 0
1111 #define CEC_OP_HEC_SET_STATE_ACTIVATE 1
1112
1113 #define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION 0x04
1114 #define CEC_MSG_CDC_HEC_NOTIFY_ALIVE 0x05
1115 #define CEC_MSG_CDC_HEC_DISCOVER 0x06
1116 /* Hotplug Detect messages */
1117 #define CEC_MSG_CDC_HPD_SET_STATE 0x10
1118 /* HPD State Operand (hpd_state) */
1119 #define CEC_OP_HPD_STATE_CP_EDID_DISABLE 0
1120 #define CEC_OP_HPD_STATE_CP_EDID_ENABLE 1
1121 #define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE 2
1122 #define CEC_OP_HPD_STATE_EDID_DISABLE 3
1123 #define CEC_OP_HPD_STATE_EDID_ENABLE 4
1124 #define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE 5
1125 #define CEC_MSG_CDC_HPD_REPORT_STATE 0x11
1126 /* HPD Error Code Operand (hpd_error) */
1127 #define CEC_OP_HPD_ERROR_NONE 0
1128 #define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE 1
1129 #define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE 2
1130 #define CEC_OP_HPD_ERROR_OTHER 3
1131 #define CEC_OP_HPD_ERROR_NONE_NO_VIDEO 4
1132
1133 /* End of Messages */
1134
1135 /* Helper functions to identify the 'special' CEC devices */
1136
cec_is_2nd_tv(const struct cec_log_addrs * las)1137 static inline int cec_is_2nd_tv(const struct cec_log_addrs *las)
1138 {
1139 /*
1140 * It is a second TV if the logical address is 14 or 15 and the
1141 * primary device type is a TV.
1142 */
1143 return las->num_log_addrs &&
1144 las->log_addr[0] >= CEC_LOG_ADDR_SPECIFIC &&
1145 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_TV;
1146 }
1147
cec_is_processor(const struct cec_log_addrs * las)1148 static inline int cec_is_processor(const struct cec_log_addrs *las)
1149 {
1150 /*
1151 * It is a processor if the logical address is 12-15 and the
1152 * primary device type is a Processor.
1153 */
1154 return las->num_log_addrs &&
1155 las->log_addr[0] >= CEC_LOG_ADDR_BACKUP_1 &&
1156 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_PROCESSOR;
1157 }
1158
cec_is_switch(const struct cec_log_addrs * las)1159 static inline int cec_is_switch(const struct cec_log_addrs *las)
1160 {
1161 /*
1162 * It is a switch if the logical address is 15 and the
1163 * primary device type is a Switch and the CDC-Only flag is not set.
1164 */
1165 return las->num_log_addrs == 1 &&
1166 las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED &&
1167 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH &&
1168 !(las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY);
1169 }
1170
cec_is_cdc_only(const struct cec_log_addrs * las)1171 static inline int cec_is_cdc_only(const struct cec_log_addrs *las)
1172 {
1173 /*
1174 * It is a CDC-only device if the logical address is 15 and the
1175 * primary device type is a Switch and the CDC-Only flag is set.
1176 */
1177 return las->num_log_addrs == 1 &&
1178 las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED &&
1179 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH &&
1180 (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY);
1181 }
1182
1183 #endif
1184