1 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
2 /*
3 * include/uapi/linux/tipc_config.h: Header for TIPC configuration interface
4 *
5 * Copyright (c) 2003-2006, Ericsson AB
6 * Copyright (c) 2005-2007, 2010-2011, Wind River Systems
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions are met:
11 *
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the names of the copyright holders nor the names of its
18 * contributors may be used to endorse or promote products derived from
19 * this software without specific prior written permission.
20 *
21 * Alternatively, this software may be distributed under the terms of the
22 * GNU General Public License ("GPL") version 2 as published by the Free
23 * Software Foundation.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
26 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
29 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 * POSSIBILITY OF SUCH DAMAGE.
36 */
37
38 #ifndef _LINUX_TIPC_CONFIG_H_
39 #define _LINUX_TIPC_CONFIG_H_
40
41 #include <linux/types.h>
42 #include <linux/string.h>
43 #include <linux/tipc.h>
44 #include <asm/byteorder.h>
45
46 #ifndef __KERNEL__
47 #include <arpa/inet.h> /* for ntohs etc. */
48 #endif
49
50 /*
51 * Configuration
52 *
53 * All configuration management messaging involves sending a request message
54 * to the TIPC configuration service on a node, which sends a reply message
55 * back. (In the future multi-message replies may be supported.)
56 *
57 * Both request and reply messages consist of a transport header and payload.
58 * The transport header contains info about the desired operation;
59 * the payload consists of zero or more type/length/value (TLV) items
60 * which specify parameters or results for the operation.
61 *
62 * For many operations, the request and reply messages have a fixed number
63 * of TLVs (usually zero or one); however, some reply messages may return
64 * a variable number of TLVs. A failed request is denoted by the presence
65 * of an "error string" TLV in the reply message instead of the TLV(s) the
66 * reply should contain if the request succeeds.
67 */
68
69 /*
70 * Public commands:
71 * May be issued by any process.
72 * Accepted by own node, or by remote node only if remote management enabled.
73 */
74
75 #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */
76 #define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */
77 #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */
78 #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */
79 #define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */
80 #define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */
81 #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */
82 #define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */
83 #define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */
84
85 /*
86 * Protected commands:
87 * May only be issued by "network administration capable" process.
88 * Accepted by own node, or by remote node only if remote management enabled
89 * and this node is zone manager.
90 */
91
92 #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */
93 #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */
94 #define TIPC_CMD_GET_MAX_PUBL 0x4005 /* obsoleted */
95 #define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* obsoleted */
96 #define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */
97 #define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */
98 #define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */
99 #define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */
100 #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */
101
102 #define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */
103 #define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */
104 #define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */
105 #define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */
106 #define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */
107 #define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */
108 #define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */
109 #define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */
110
111 /*
112 * Private commands:
113 * May only be issued by "network administration capable" process.
114 * Accepted by own node only; cannot be used on a remote node.
115 */
116
117 #define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */
118 #define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */
119 #define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */
120 #define TIPC_CMD_SET_MAX_PUBL 0x8005 /* obsoleted */
121 #define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* obsoleted */
122 #define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */
123 #define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */
124 #define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */
125 #define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */
126 #define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */
127
128 /*
129 * Reserved commands:
130 * May not be issued by any process.
131 * Used internally by TIPC.
132 */
133
134 #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */
135
136 /*
137 * TLV types defined for TIPC
138 */
139
140 #define TIPC_TLV_NONE 0 /* no TLV present */
141 #define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/
142 #define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */
143 #define TIPC_TLV_STRING 3 /* char[128] (max) */
144 #define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */
145 #define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */
146
147 #define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */
148 #define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */
149 #define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */
150 #define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */
151 #define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */
152 #define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */
153 #define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */
154 #define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */
155 #define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */
156 #define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */
157 #define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */
158
159 /*
160 * Link priority limits (min, default, max, media default)
161 */
162
163 #define TIPC_MIN_LINK_PRI 0
164 #define TIPC_DEF_LINK_PRI 10
165 #define TIPC_MAX_LINK_PRI 31
166 #define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1)
167
168 /*
169 * Link tolerance limits (min, default, max), in ms
170 */
171
172 #define TIPC_MIN_LINK_TOL 50
173 #define TIPC_DEF_LINK_TOL 1500
174 #define TIPC_MAX_LINK_TOL 30000
175
176 #if (TIPC_MIN_LINK_TOL < 16)
177 #error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)"
178 #endif
179
180 /*
181 * Link window limits (min, default, max), in packets
182 */
183
184 #define TIPC_MIN_LINK_WIN 16
185 #define TIPC_DEF_LINK_WIN 50
186 #define TIPC_MAX_LINK_WIN 8191
187
188 /*
189 * Default MTU for UDP media
190 */
191
192 #define TIPC_DEF_LINK_UDP_MTU 14000
193
194 struct tipc_node_info {
195 __be32 addr; /* network address of node */
196 __be32 up; /* 0=down, 1= up */
197 };
198
199 struct tipc_link_info {
200 __be32 dest; /* network address of peer node */
201 __be32 up; /* 0=down, 1=up */
202 char str[TIPC_MAX_LINK_NAME]; /* link name */
203 };
204
205 struct tipc_bearer_config {
206 __be32 priority; /* Range [1,31]. Override per link */
207 __be32 disc_domain; /* <Z.C.N> describing desired nodes */
208 char name[TIPC_MAX_BEARER_NAME];
209 };
210
211 struct tipc_link_config {
212 __be32 value;
213 char name[TIPC_MAX_LINK_NAME];
214 };
215
216 #define TIPC_NTQ_ALLTYPES 0x80000000
217
218 struct tipc_name_table_query {
219 __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
220 __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */
221 __be32 lowbound; /* (i.e. displays all entries of name table) */
222 __be32 upbound;
223 };
224
225 /*
226 * The error string TLV is a null-terminated string describing the cause
227 * of the request failure. To simplify error processing (and to save space)
228 * the first character of the string can be a special error code character
229 * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
230 */
231
232 #define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */
233 #define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */
234 #define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */
235 #define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */
236 #define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */
237 #define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */
238
239 /*
240 * A TLV consists of a descriptor, followed by the TLV value.
241 * TLV descriptor fields are stored in network byte order;
242 * TLV values must also be stored in network byte order (where applicable).
243 * TLV descriptors must be aligned to addresses which are multiple of 4,
244 * so up to 3 bytes of padding may exist at the end of the TLV value area.
245 * There must not be any padding between the TLV descriptor and its value.
246 */
247
248 struct tlv_desc {
249 __be16 tlv_len; /* TLV length (descriptor + value) */
250 __be16 tlv_type; /* TLV identifier */
251 };
252
253 #define TLV_ALIGNTO 4
254
255 #define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
256 #define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
257 #define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
258 #define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
259
TLV_OK(const void * tlv,__u16 space)260 static inline int TLV_OK(const void *tlv, __u16 space)
261 {
262 /*
263 * Would also like to check that "tlv" is a multiple of 4,
264 * but don't know how to do this in a portable way.
265 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
266 * won't allow binary "&" with a pointer.
267 * - Tried casting "tlv" to integer type, but causes warning about size
268 * mismatch when pointer is bigger than chosen type (int, long, ...).
269 */
270
271 return (space >= TLV_SPACE(0)) &&
272 (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
273 }
274
TLV_CHECK(const void * tlv,__u16 space,__u16 exp_type)275 static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
276 {
277 return TLV_OK(tlv, space) &&
278 (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
279 }
280
TLV_GET_LEN(struct tlv_desc * tlv)281 static inline int TLV_GET_LEN(struct tlv_desc *tlv)
282 {
283 return ntohs(tlv->tlv_len);
284 }
285
TLV_SET_LEN(struct tlv_desc * tlv,__u16 len)286 static inline void TLV_SET_LEN(struct tlv_desc *tlv, __u16 len)
287 {
288 tlv->tlv_len = htons(len);
289 }
290
TLV_CHECK_TYPE(struct tlv_desc * tlv,__u16 type)291 static inline int TLV_CHECK_TYPE(struct tlv_desc *tlv, __u16 type)
292 {
293 return (ntohs(tlv->tlv_type) == type);
294 }
295
TLV_SET_TYPE(struct tlv_desc * tlv,__u16 type)296 static inline void TLV_SET_TYPE(struct tlv_desc *tlv, __u16 type)
297 {
298 tlv->tlv_type = htons(type);
299 }
300
TLV_SET(void * tlv,__u16 type,void * data,__u16 len)301 static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
302 {
303 struct tlv_desc *tlv_ptr;
304 int tlv_len;
305
306 tlv_len = TLV_LENGTH(len);
307 tlv_ptr = (struct tlv_desc *)tlv;
308 tlv_ptr->tlv_type = htons(type);
309 tlv_ptr->tlv_len = htons(tlv_len);
310 if (len && data) {
311 memcpy(TLV_DATA(tlv_ptr), data, len);
312 memset((char *)TLV_DATA(tlv_ptr) + len, 0, TLV_SPACE(len) - tlv_len);
313 }
314 return TLV_SPACE(len);
315 }
316
317 /*
318 * A TLV list descriptor simplifies processing of messages
319 * containing multiple TLVs.
320 */
321
322 struct tlv_list_desc {
323 struct tlv_desc *tlv_ptr; /* ptr to current TLV */
324 __u32 tlv_space; /* # bytes from curr TLV to list end */
325 };
326
TLV_LIST_INIT(struct tlv_list_desc * list,void * data,__u32 space)327 static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
328 void *data, __u32 space)
329 {
330 list->tlv_ptr = (struct tlv_desc *)data;
331 list->tlv_space = space;
332 }
333
TLV_LIST_EMPTY(struct tlv_list_desc * list)334 static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
335 {
336 return (list->tlv_space == 0);
337 }
338
TLV_LIST_CHECK(struct tlv_list_desc * list,__u16 exp_type)339 static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
340 {
341 return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
342 }
343
TLV_LIST_DATA(struct tlv_list_desc * list)344 static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
345 {
346 return TLV_DATA(list->tlv_ptr);
347 }
348
TLV_LIST_STEP(struct tlv_list_desc * list)349 static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
350 {
351 __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
352
353 list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
354 list->tlv_space -= tlv_space;
355 }
356
357 /*
358 * Configuration messages exchanged via NETLINK_GENERIC use the following
359 * family id, name, version and command.
360 */
361 #define TIPC_GENL_NAME "TIPC"
362 #define TIPC_GENL_VERSION 0x1
363 #define TIPC_GENL_CMD 0x1
364
365 /*
366 * TIPC specific header used in NETLINK_GENERIC requests.
367 */
368 struct tipc_genlmsghdr {
369 __u32 dest; /* Destination address */
370 __u16 cmd; /* Command */
371 __u16 reserved; /* Unused */
372 };
373
374 #define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
375
376 /*
377 * Configuration messages exchanged via TIPC sockets use the TIPC configuration
378 * message header, which is defined below. This structure is analogous
379 * to the Netlink message header, but fields are stored in network byte order
380 * and no padding is permitted between the header and the message data
381 * that follows.
382 */
383
384 struct tipc_cfg_msg_hdr {
385 __be32 tcm_len; /* Message length (including header) */
386 __be16 tcm_type; /* Command type */
387 __be16 tcm_flags; /* Additional flags */
388 char tcm_reserved[8]; /* Unused */
389 };
390
391 #define TCM_F_REQUEST 0x1 /* Flag: Request message */
392 #define TCM_F_MORE 0x2 /* Flag: Message to be continued */
393
394 #define TCM_ALIGN(datalen) (((datalen)+3) & ~3)
395 #define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
396 #define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen)))
397 #define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
398
TCM_SET(void * msg,__u16 cmd,__u16 flags,void * data,__u16 data_len)399 static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
400 void *data, __u16 data_len)
401 {
402 struct tipc_cfg_msg_hdr *tcm_hdr;
403 int msg_len;
404
405 msg_len = TCM_LENGTH(data_len);
406 tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
407 tcm_hdr->tcm_len = htonl(msg_len);
408 tcm_hdr->tcm_type = htons(cmd);
409 tcm_hdr->tcm_flags = htons(flags);
410 if (data_len && data) {
411 memcpy(TCM_DATA(msg), data, data_len);
412 memset((char *)TCM_DATA(msg) + data_len, 0, TCM_SPACE(data_len) - msg_len);
413 }
414 return TCM_SPACE(data_len);
415 }
416
417 #endif
418