1/* src/config.h. Generated from config.h.in by configure. */ 2/* src/config.h.in. Generated from configure.ac by autoheader. */ 3 4/* PCRE2 is written in Standard C, but there are a few non-standard things it 5can cope with, allowing it to run on SunOS4 and other "close to standard" 6systems. 7 8In environments that support the GNU autotools, config.h.in is converted into 9config.h by the "configure" script. In environments that use CMake, 10config-cmake.in is converted into config.h. If you are going to build PCRE2 "by 11hand" without using "configure" or CMake, you should copy the distributed 12config.h.generic to config.h, and edit the macro definitions to be the way you 13need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, 14so that config.h is included at the start of every source. 15 16Alternatively, you can avoid editing by using -D on the compiler command line 17to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H, 18but if you do, default values will be taken from config.h for non-boolean 19macros that are not defined on the command line. 20 21Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be 22defined (conventionally to 1) for TRUE, and not defined at all for FALSE. All 23such macros are listed as a commented #undef in config.h.generic. Macros such 24as MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are 25surrounded by #ifndef/#endif lines so that the value can be overridden by -D. 26 27PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if 28HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make 29sure both macros are undefined; an emulation function will then be used. */ 30 31/* By default, the \R escape sequence matches any Unicode line ending 32 character or sequence of characters. If BSR_ANYCRLF is defined (to any 33 value), this is changed so that backslash-R matches only CR, LF, or CRLF. 34 The build-time default can be overridden by the user of PCRE2 at runtime. 35 */ 36/* #undef BSR_ANYCRLF */ 37 38/* Define to any value to disable the use of the z and t modifiers in 39 formatting settings such as %zu or %td (this is rarely needed). */ 40/* #undef DISABLE_PERCENT_ZT */ 41 42/* If you are compiling for a system that uses EBCDIC instead of ASCII 43 character codes, define this macro to any value. When EBCDIC is set, PCRE2 44 assumes that all input strings are in EBCDIC. If you do not define this 45 macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It 46 is not possible to build a version of PCRE2 that supports both EBCDIC and 47 UTF-8/16/32. */ 48/* #undef EBCDIC */ 49 50/* In an EBCDIC environment, define this macro to any value to arrange for the 51 NL character to be 0x25 instead of the default 0x15. NL plays the role that 52 LF does in an ASCII/Unicode environment. */ 53/* #undef EBCDIC_NL25 */ 54 55/* Define to 1 if you have the `bcopy' function. */ 56/* #undef HAVE_BCOPY */ 57 58/* Define to 1 if you have the <bzlib.h> header file. */ 59/* #undef HAVE_BZLIB_H */ 60 61/* Define to 1 if you have the <dirent.h> header file. */ 62/* #undef HAVE_DIRENT_H */ 63 64/* Define to 1 if you have the <dlfcn.h> header file. */ 65/* #undef HAVE_DLFCN_H */ 66 67/* Define to 1 if you have the <editline/readline.h> header file. */ 68/* #undef HAVE_EDITLINE_READLINE_H */ 69 70/* Define to 1 if you have the <edit/readline/readline.h> header file. */ 71/* #undef HAVE_EDIT_READLINE_READLINE_H */ 72 73/* Define to 1 if you have the <inttypes.h> header file. */ 74/* #undef HAVE_INTTYPES_H */ 75 76/* Define to 1 if you have the <limits.h> header file. */ 77/* #undef HAVE_LIMITS_H */ 78 79/* Define to 1 if you have the `memmove' function. */ 80/* #undef HAVE_MEMMOVE */ 81 82/* Define to 1 if you have the <memory.h> header file. */ 83/* #undef HAVE_MEMORY_H */ 84 85/* Define to 1 if you have the `mkostemp' function. */ 86/* #undef HAVE_MKOSTEMP */ 87 88/* Define if you have POSIX threads libraries and header files. */ 89/* #undef HAVE_PTHREAD */ 90 91/* Have PTHREAD_PRIO_INHERIT. */ 92/* #undef HAVE_PTHREAD_PRIO_INHERIT */ 93 94/* Define to 1 if you have the <readline/history.h> header file. */ 95/* #undef HAVE_READLINE_HISTORY_H */ 96 97/* Define to 1 if you have the <readline/readline.h> header file. */ 98/* #undef HAVE_READLINE_READLINE_H */ 99 100/* Define to 1 if you have the `secure_getenv' function. */ 101/* #undef HAVE_SECURE_GETENV */ 102 103/* Define to 1 if you have the <stdint.h> header file. */ 104/* #undef HAVE_STDINT_H */ 105 106/* Define to 1 if you have the <stdlib.h> header file. */ 107/* #undef HAVE_STDLIB_H */ 108 109/* Define to 1 if you have the `strerror' function. */ 110/* #undef HAVE_STRERROR */ 111 112/* Define to 1 if you have the <strings.h> header file. */ 113/* #undef HAVE_STRINGS_H */ 114 115/* Define to 1 if you have the <string.h> header file. */ 116/* #undef HAVE_STRING_H */ 117 118/* Define to 1 if you have the <sys/stat.h> header file. */ 119/* #undef HAVE_SYS_STAT_H */ 120 121/* Define to 1 if you have the <sys/types.h> header file. */ 122/* #undef HAVE_SYS_TYPES_H */ 123 124/* Define to 1 if you have the <sys/wait.h> header file. */ 125/* #undef HAVE_SYS_WAIT_H */ 126 127/* Define to 1 if you have the <unistd.h> header file. */ 128/* #undef HAVE_UNISTD_H */ 129 130/* Define to 1 if the compiler supports simple visibility declarations. */ 131/* #undef HAVE_VISIBILITY */ 132 133/* Define to 1 if you have the <windows.h> header file. */ 134/* #undef HAVE_WINDOWS_H */ 135 136/* Define to 1 if you have the <zlib.h> header file. */ 137/* #undef HAVE_ZLIB_H */ 138 139/* This limits the amount of memory that may be used while matching a pattern. 140 It applies to both pcre2_match() and pcre2_dfa_match(). It does not apply 141 to JIT matching. The value is in kibibytes (units of 1024 bytes). */ 142#ifndef HEAP_LIMIT 143#define HEAP_LIMIT 20000000 144#endif 145 146/* The value of LINK_SIZE determines the number of bytes used to store links 147 as offsets within the compiled regex. The default is 2, which allows for 148 compiled patterns up to 65535 code units long. This covers the vast 149 majority of cases. However, PCRE2 can also be compiled to use 3 or 4 bytes 150 instead. This allows for longer patterns in extreme cases. */ 151#ifndef LINK_SIZE 152#define LINK_SIZE 2 153#endif 154 155/* Define to the sub-directory where libtool stores uninstalled libraries. */ 156/* This is ignored unless you are using libtool. */ 157#ifndef LT_OBJDIR 158#define LT_OBJDIR ".libs/" 159#endif 160 161/* The value of MATCH_LIMIT determines the default number of times the 162 pcre2_match() function can record a backtrack position during a single 163 matching attempt. The value is also used to limit a loop counter in 164 pcre2_dfa_match(). There is a runtime interface for setting a different 165 limit. The limit exists in order to catch runaway regular expressions that 166 take for ever to determine that they do not match. The default is set very 167 large so that it does not accidentally catch legitimate cases. */ 168#ifndef MATCH_LIMIT 169#define MATCH_LIMIT 10000000 170#endif 171 172/* The above limit applies to all backtracks, whether or not they are nested. 173 In some environments it is desirable to limit the nesting of backtracking 174 (that is, the depth of tree that is searched) more strictly, in order to 175 restrict the maximum amount of heap memory that is used. The value of 176 MATCH_LIMIT_DEPTH provides this facility. To have any useful effect, it 177 must be less than the value of MATCH_LIMIT. The default is to use the same 178 value as MATCH_LIMIT. There is a runtime method for setting a different 179 limit. In the case of pcre2_dfa_match(), this limit controls the depth of 180 the internal nested function calls that are used for pattern recursions, 181 lookarounds, and atomic groups. */ 182#ifndef MATCH_LIMIT_DEPTH 183#define MATCH_LIMIT_DEPTH MATCH_LIMIT 184#endif 185 186/* This limit is parameterized just in case anybody ever wants to change it. 187 Care must be taken if it is increased, because it guards against integer 188 overflow caused by enormously large patterns. */ 189#ifndef MAX_NAME_COUNT 190#define MAX_NAME_COUNT 10000 191#endif 192 193/* This limit is parameterized just in case anybody ever wants to change it. 194 Care must be taken if it is increased, because it guards against integer 195 overflow caused by enormously large patterns. */ 196#ifndef MAX_NAME_SIZE 197#define MAX_NAME_SIZE 32 198#endif 199 200/* Defining NEVER_BACKSLASH_C locks out the use of \C in all patterns. */ 201/* #undef NEVER_BACKSLASH_C */ 202 203/* The value of NEWLINE_DEFAULT determines the default newline character 204 sequence. PCRE2 client programs can override this by selecting other values 205 at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), 5 206 (ANYCRLF), and 6 (NUL). */ 207#ifndef NEWLINE_DEFAULT 208#define NEWLINE_DEFAULT 2 209#endif 210 211/* Name of package */ 212#define PACKAGE "pcre2" 213 214/* Define to the address where bug reports for this package should be sent. */ 215#define PACKAGE_BUGREPORT "" 216 217/* Define to the full name of this package. */ 218#define PACKAGE_NAME "PCRE2" 219 220/* Define to the full name and version of this package. */ 221#define PACKAGE_STRING "PCRE2 10.33" 222 223/* Define to the one symbol short name of this package. */ 224#define PACKAGE_TARNAME "pcre2" 225 226/* Define to the home page for this package. */ 227#define PACKAGE_URL "" 228 229/* Define to the version of this package. */ 230#define PACKAGE_VERSION "10.33" 231 232/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested 233 parentheses (of any kind) in a pattern. This limits the amount of system 234 stack that is used while compiling a pattern. */ 235#ifndef PARENS_NEST_LIMIT 236#define PARENS_NEST_LIMIT 250 237#endif 238 239/* The value of PCRE2GREP_BUFSIZE is the starting size of the buffer used by 240 pcre2grep to hold parts of the file it is searching. The buffer will be 241 expanded up to PCRE2GREP_MAX_BUFSIZE if necessary, for files containing 242 very long lines. The actual amount of memory used by pcre2grep is three 243 times this number, because it allows for the buffering of "before" and 244 "after" lines. */ 245#ifndef PCRE2GREP_BUFSIZE 246#define PCRE2GREP_BUFSIZE 20480 247#endif 248 249/* The value of PCRE2GREP_MAX_BUFSIZE specifies the maximum size of the buffer 250 used by pcre2grep to hold parts of the file it is searching. The actual 251 amount of memory used by pcre2grep is three times this number, because it 252 allows for the buffering of "before" and "after" lines. */ 253#ifndef PCRE2GREP_MAX_BUFSIZE 254#define PCRE2GREP_MAX_BUFSIZE 1048576 255#endif 256 257/* Define to any value to include debugging code. */ 258/* #undef PCRE2_DEBUG */ 259 260/* If you are compiling for a system other than a Unix-like system or 261 Win32, and it needs some magic to be inserted before the definition 262 of a function that is exported by the library, define this macro to 263 contain the relevant magic. If you do not define this macro, a suitable 264 __declspec value is used for Windows systems; in other environments 265 "extern" is used for a C compiler and "extern C" for a C++ compiler. 266 This macro apears at the start of every exported function that is part 267 of the external API. It does not appear on functions that are "external" 268 in the C sense, but which are internal to the library. */ 269/* #undef PCRE2_EXP_DEFN */ 270 271/* Define to any value if linking statically (TODO: make nice with Libtool) */ 272/* #undef PCRE2_STATIC */ 273 274/* Define to necessary symbol if this constant uses a non-standard name on 275 your system. */ 276/* #undef PTHREAD_CREATE_JOINABLE */ 277 278/* Define to any non-zero number to enable support for SELinux compatible 279 executable memory allocator in JIT. Note that this will have no effect 280 unless SUPPORT_JIT is also defined. */ 281/* #undef SLJIT_PROT_EXECUTABLE_ALLOCATOR */ 282 283/* Define to 1 if you have the ANSI C header files. */ 284/* #undef STDC_HEADERS */ 285 286/* Define to any value to enable support for Just-In-Time compiling. */ 287/* #undef SUPPORT_JIT */ 288 289/* Define to any value to allow pcre2grep to be linked with libbz2, so that it 290 is able to handle .bz2 files. */ 291/* #undef SUPPORT_LIBBZ2 */ 292 293/* Define to any value to allow pcre2test to be linked with libedit. */ 294/* #undef SUPPORT_LIBEDIT */ 295 296/* Define to any value to allow pcre2test to be linked with libreadline. */ 297/* #undef SUPPORT_LIBREADLINE */ 298 299/* Define to any value to allow pcre2grep to be linked with libz, so that it 300 is able to handle .gz files. */ 301/* #undef SUPPORT_LIBZ */ 302 303/* Define to any value to enable callout script support in pcre2grep. */ 304/* #undef SUPPORT_PCRE2GREP_CALLOUT */ 305 306/* Define to any value to enable fork support in pcre2grep callout scripts. 307 This will have no effect unless SUPPORT_PCRE2GREP_CALLOUT is also defined. 308 */ 309/* #undef SUPPORT_PCRE2GREP_CALLOUT_FORK */ 310 311/* Define to any value to enable JIT support in pcre2grep. Note that this will 312 have no effect unless SUPPORT_JIT is also defined. */ 313/* #undef SUPPORT_PCRE2GREP_JIT */ 314 315/* Define to any value to enable the 16 bit PCRE2 library. */ 316/* #undef SUPPORT_PCRE2_16 */ 317 318/* Define to any value to enable the 32 bit PCRE2 library. */ 319/* #undef SUPPORT_PCRE2_32 */ 320 321/* Define to any value to enable the 8 bit PCRE2 library. */ 322/* #undef SUPPORT_PCRE2_8 */ 323 324/* Define to any value to enable support for Unicode and UTF encoding. This 325 will work even in an EBCDIC environment, but it is incompatible with the 326 EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or* 327 ASCII/Unicode, but not both at once. */ 328/* #undef SUPPORT_UNICODE */ 329 330/* Define to any value for valgrind support to find invalid memory reads. */ 331/* #undef SUPPORT_VALGRIND */ 332 333/* Enable extensions on AIX 3, Interix. */ 334#ifndef _ALL_SOURCE 335# define _ALL_SOURCE 1 336#endif 337/* Enable GNU extensions on systems that have them. */ 338#ifndef _GNU_SOURCE 339# define _GNU_SOURCE 1 340#endif 341/* Enable threading extensions on Solaris. */ 342#ifndef _POSIX_PTHREAD_SEMANTICS 343# define _POSIX_PTHREAD_SEMANTICS 1 344#endif 345/* Enable extensions on HP NonStop. */ 346#ifndef _TANDEM_SOURCE 347# define _TANDEM_SOURCE 1 348#endif 349/* Enable general extensions on Solaris. */ 350#ifndef __EXTENSIONS__ 351# define __EXTENSIONS__ 1 352#endif 353 354/* Version number of package */ 355#define VERSION "10.33" 356 357/* Define to 1 if on MINIX. */ 358/* #undef _MINIX */ 359 360/* Define to 2 if the system does not provide POSIX.1 features except with 361 this defined. */ 362/* #undef _POSIX_1_SOURCE */ 363 364/* Define to 1 if you need to in order for `stat' and other things to work. */ 365/* #undef _POSIX_SOURCE */ 366 367/* Define to empty if `const' does not conform to ANSI C. */ 368/* #undef const */ 369 370/* Define to the type of a signed integer type of width exactly 64 bits if 371 such a type exists and the standard includes do not define it. */ 372/* #undef int64_t */ 373 374/* Define to `unsigned int' if <sys/types.h> does not define. */ 375/* #undef size_t */ 376