1/* 2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8/dts-v1/; 9 10#include "am33xx.dtsi" 11#include <dt-bindings/interrupt-controller/irq.h> 12 13/ { 14 model = "TI AM335x EVM"; 15 compatible = "ti,am335x-evm", "ti,am33xx"; 16 17 chosen { 18 stdout-path = &uart0; 19 tick-timer = &timer2; 20 }; 21 22 cpus { 23 cpu@0 { 24 cpu0-supply = <&vdd1_reg>; 25 }; 26 }; 27 28 memory { 29 device_type = "memory"; 30 reg = <0x80000000 0x10000000>; /* 256 MB */ 31 }; 32 33 vbat: fixedregulator@0 { 34 compatible = "regulator-fixed"; 35 regulator-name = "vbat"; 36 regulator-min-microvolt = <5000000>; 37 regulator-max-microvolt = <5000000>; 38 regulator-boot-on; 39 }; 40 41 lis3_reg: fixedregulator@1 { 42 compatible = "regulator-fixed"; 43 regulator-name = "lis3_reg"; 44 regulator-boot-on; 45 }; 46 47 wlan_en_reg: fixedregulator@2 { 48 compatible = "regulator-fixed"; 49 regulator-name = "wlan-en-regulator"; 50 regulator-min-microvolt = <1800000>; 51 regulator-max-microvolt = <1800000>; 52 53 /* WLAN_EN GPIO for this board - Bank1, pin16 */ 54 gpio = <&gpio1 16 0>; 55 56 /* WLAN card specific delay */ 57 startup-delay-us = <70000>; 58 enable-active-high; 59 }; 60 61 matrix_keypad: matrix_keypad@0 { 62 compatible = "gpio-matrix-keypad"; 63 debounce-delay-ms = <5>; 64 col-scan-delay-us = <2>; 65 66 row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */ 67 &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */ 68 &gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */ 69 70 col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */ 71 &gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */ 72 73 linux,keymap = <0x0000008b /* MENU */ 74 0x0100009e /* BACK */ 75 0x02000069 /* LEFT */ 76 0x0001006a /* RIGHT */ 77 0x0101001c /* ENTER */ 78 0x0201006c>; /* DOWN */ 79 }; 80 81 gpio_keys: volume_keys@0 { 82 compatible = "gpio-keys"; 83 autorepeat; 84 85 switch@9 { 86 label = "volume-up"; 87 linux,code = <115>; 88 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; 89 gpio-key,wakeup; 90 }; 91 92 switch@10 { 93 label = "volume-down"; 94 linux,code = <114>; 95 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; 96 gpio-key,wakeup; 97 }; 98 }; 99 100 backlight { 101 compatible = "pwm-backlight"; 102 pwms = <&ecap0 0 50000 0>; 103 brightness-levels = <0 51 53 56 62 75 101 152 255>; 104 default-brightness-level = <8>; 105 }; 106 107 panel { 108 compatible = "ti,tilcdc,panel"; 109 status = "okay"; 110 pinctrl-names = "default"; 111 pinctrl-0 = <&lcd_pins_s0>; 112 panel-info { 113 ac-bias = <255>; 114 ac-bias-intrpt = <0>; 115 dma-burst-sz = <16>; 116 bpp = <32>; 117 fdd = <0x80>; 118 sync-edge = <0>; 119 sync-ctrl = <1>; 120 raster-order = <0>; 121 fifo-th = <0>; 122 }; 123 124 display-timings { 125 800x480p62 { 126 clock-frequency = <30000000>; 127 hactive = <800>; 128 vactive = <480>; 129 hfront-porch = <39>; 130 hback-porch = <39>; 131 hsync-len = <47>; 132 vback-porch = <29>; 133 vfront-porch = <13>; 134 vsync-len = <2>; 135 hsync-active = <1>; 136 vsync-active = <1>; 137 }; 138 }; 139 }; 140 141 sound { 142 compatible = "ti,da830-evm-audio"; 143 ti,model = "AM335x-EVM"; 144 ti,audio-codec = <&tlv320aic3106>; 145 ti,mcasp-controller = <&mcasp1>; 146 ti,codec-clock-rate = <12000000>; 147 ti,audio-routing = 148 "Headphone Jack", "HPLOUT", 149 "Headphone Jack", "HPROUT", 150 "LINE1L", "Line In", 151 "LINE1R", "Line In"; 152 }; 153}; 154 155&am33xx_pinmux { 156 pinctrl-names = "default"; 157 pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; 158 159 matrix_keypad_s0: matrix_keypad_s0 { 160 pinctrl-single,pins = < 161 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ 162 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ 163 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ 164 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ 165 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ 166 >; 167 }; 168 169 volume_keys_s0: volume_keys_s0 { 170 pinctrl-single,pins = < 171 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ 172 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ 173 >; 174 }; 175 176 i2c0_pins: pinmux_i2c0_pins { 177 pinctrl-single,pins = < 178 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ 179 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ 180 >; 181 }; 182 183 i2c1_pins: pinmux_i2c1_pins { 184 pinctrl-single,pins = < 185 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ 186 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ 187 >; 188 }; 189 190 uart0_pins: pinmux_uart0_pins { 191 pinctrl-single,pins = < 192 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ 193 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ 194 >; 195 }; 196 197 uart1_pins: pinmux_uart1_pins { 198 pinctrl-single,pins = < 199 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ 200 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ 201 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ 202 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ 203 >; 204 }; 205 206 clkout2_pin: pinmux_clkout2_pin { 207 pinctrl-single,pins = < 208 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ 209 >; 210 }; 211 212 nandflash_pins_s0: nandflash_pins_s0 { 213 pinctrl-single,pins = < 214 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ 215 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ 216 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ 217 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ 218 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ 219 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ 220 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ 221 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ 222 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ 223 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ 224 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ 225 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ 226 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ 227 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ 228 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ 229 >; 230 }; 231 232 ecap0_pins: backlight_pins { 233 pinctrl-single,pins = < 234 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ 235 >; 236 }; 237 238 cpsw_default: cpsw_default { 239 pinctrl-single,pins = < 240 /* Slave 1 */ 241 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ 242 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ 243 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ 244 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ 245 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ 246 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ 247 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ 248 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ 249 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ 250 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ 251 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ 252 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ 253 >; 254 }; 255 256 cpsw_sleep: cpsw_sleep { 257 pinctrl-single,pins = < 258 /* Slave 1 reset value */ 259 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) 260 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) 261 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) 262 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) 263 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) 264 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) 265 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) 266 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) 267 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) 268 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) 269 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) 270 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) 271 >; 272 }; 273 274 davinci_mdio_default: davinci_mdio_default { 275 pinctrl-single,pins = < 276 /* MDIO */ 277 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ 278 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 279 >; 280 }; 281 282 davinci_mdio_sleep: davinci_mdio_sleep { 283 pinctrl-single,pins = < 284 /* MDIO reset value */ 285 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) 286 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) 287 >; 288 }; 289 290 mmc1_pins: pinmux_mmc1_pins { 291 pinctrl-single,pins = < 292 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ 293 >; 294 }; 295 296 mmc3_pins: pinmux_mmc3_pins { 297 pinctrl-single,pins = < 298 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ 299 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ 300 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ 301 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ 302 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ 303 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ 304 >; 305 }; 306 307 wlan_pins: pinmux_wlan_pins { 308 pinctrl-single,pins = < 309 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ 310 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ 311 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ 312 >; 313 }; 314 315 lcd_pins_s0: lcd_pins_s0 { 316 pinctrl-single,pins = < 317 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ 318 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ 319 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ 320 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ 321 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ 322 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ 323 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ 324 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ 325 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ 326 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ 327 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ 328 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ 329 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ 330 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ 331 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ 332 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ 333 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ 334 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ 335 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ 336 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ 337 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ 338 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ 339 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ 340 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ 341 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ 342 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ 343 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ 344 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ 345 >; 346 }; 347 348 am335x_evm_audio_pins: am335x_evm_audio_pins { 349 pinctrl-single,pins = < 350 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ 351 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ 352 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ 353 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ 354 >; 355 }; 356 357 dcan1_pins_default: dcan1_pins_default { 358 pinctrl-single,pins = < 359 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ 360 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ 361 >; 362 }; 363}; 364 365&uart0 { 366 pinctrl-names = "default"; 367 pinctrl-0 = <&uart0_pins>; 368 369 status = "okay"; 370}; 371 372&uart1 { 373 pinctrl-names = "default"; 374 pinctrl-0 = <&uart1_pins>; 375 376 status = "okay"; 377}; 378 379&i2c0 { 380 pinctrl-names = "default"; 381 pinctrl-0 = <&i2c0_pins>; 382 383 status = "okay"; 384 clock-frequency = <400000>; 385 386 tps: tps@2d { 387 reg = <0x2d>; 388 }; 389}; 390 391&usb { 392 status = "okay"; 393}; 394 395&usb_ctrl_mod { 396 status = "okay"; 397}; 398 399&usb0_phy { 400 status = "okay"; 401}; 402 403&usb1_phy { 404 status = "okay"; 405}; 406 407&usb0 { 408 status = "okay"; 409}; 410 411&usb1 { 412 status = "okay"; 413 dr_mode = "host"; 414}; 415 416&cppi41dma { 417 status = "okay"; 418}; 419 420&i2c1 { 421 pinctrl-names = "default"; 422 pinctrl-0 = <&i2c1_pins>; 423 424 status = "okay"; 425 clock-frequency = <100000>; 426 427 lis331dlh: lis331dlh@18 { 428 compatible = "st,lis331dlh", "st,lis3lv02d"; 429 reg = <0x18>; 430 Vdd-supply = <&lis3_reg>; 431 Vdd_IO-supply = <&lis3_reg>; 432 433 st,click-single-x; 434 st,click-single-y; 435 st,click-single-z; 436 st,click-thresh-x = <10>; 437 st,click-thresh-y = <10>; 438 st,click-thresh-z = <10>; 439 st,irq1-click; 440 st,irq2-click; 441 st,wakeup-x-lo; 442 st,wakeup-x-hi; 443 st,wakeup-y-lo; 444 st,wakeup-y-hi; 445 st,wakeup-z-lo; 446 st,wakeup-z-hi; 447 st,min-limit-x = <120>; 448 st,min-limit-y = <120>; 449 st,min-limit-z = <140>; 450 st,max-limit-x = <550>; 451 st,max-limit-y = <550>; 452 st,max-limit-z = <750>; 453 }; 454 455 tsl2550: tsl2550@39 { 456 compatible = "taos,tsl2550"; 457 reg = <0x39>; 458 }; 459 460 tmp275: tmp275@48 { 461 compatible = "ti,tmp275"; 462 reg = <0x48>; 463 }; 464 465 tlv320aic3106: tlv320aic3106@1b { 466 compatible = "ti,tlv320aic3106"; 467 reg = <0x1b>; 468 status = "okay"; 469 470 /* Regulators */ 471 AVDD-supply = <&vaux2_reg>; 472 IOVDD-supply = <&vaux2_reg>; 473 DRVDD-supply = <&vaux2_reg>; 474 DVDD-supply = <&vbat>; 475 }; 476}; 477 478&lcdc { 479 status = "okay"; 480}; 481 482&elm { 483 status = "okay"; 484}; 485 486&epwmss0 { 487 status = "okay"; 488 489 ecap0: ecap@48300100 { 490 status = "okay"; 491 pinctrl-names = "default"; 492 pinctrl-0 = <&ecap0_pins>; 493 }; 494}; 495 496&gpmc { 497 status = "okay"; 498 pinctrl-names = "default"; 499 pinctrl-0 = <&nandflash_pins_s0>; 500 ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ 501 nand@0,0 { 502 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ 503 ti,nand-ecc-opt = "bch8"; 504 ti,elm-id = <&elm>; 505 nand-bus-width = <8>; 506 gpmc,device-width = <1>; 507 gpmc,sync-clk-ps = <0>; 508 gpmc,cs-on-ns = <0>; 509 gpmc,cs-rd-off-ns = <44>; 510 gpmc,cs-wr-off-ns = <44>; 511 gpmc,adv-on-ns = <6>; 512 gpmc,adv-rd-off-ns = <34>; 513 gpmc,adv-wr-off-ns = <44>; 514 gpmc,we-on-ns = <0>; 515 gpmc,we-off-ns = <40>; 516 gpmc,oe-on-ns = <0>; 517 gpmc,oe-off-ns = <54>; 518 gpmc,access-ns = <64>; 519 gpmc,rd-cycle-ns = <82>; 520 gpmc,wr-cycle-ns = <82>; 521 gpmc,wait-on-read = "true"; 522 gpmc,wait-on-write = "true"; 523 gpmc,bus-turnaround-ns = <0>; 524 gpmc,cycle2cycle-delay-ns = <0>; 525 gpmc,clk-activation-ns = <0>; 526 gpmc,wait-monitoring-ns = <0>; 527 gpmc,wr-access-ns = <40>; 528 gpmc,wr-data-mux-bus-ns = <0>; 529 /* MTD partition table */ 530 /* All SPL-* partitions are sized to minimal length 531 * which can be independently programmable. For 532 * NAND flash this is equal to size of erase-block */ 533 #address-cells = <1>; 534 #size-cells = <1>; 535 partition@0 { 536 label = "NAND.SPL"; 537 reg = <0x00000000 0x000020000>; 538 }; 539 partition@1 { 540 label = "NAND.SPL.backup1"; 541 reg = <0x00020000 0x00020000>; 542 }; 543 partition@2 { 544 label = "NAND.SPL.backup2"; 545 reg = <0x00040000 0x00020000>; 546 }; 547 partition@3 { 548 label = "NAND.SPL.backup3"; 549 reg = <0x00060000 0x00020000>; 550 }; 551 partition@4 { 552 label = "NAND.u-boot-spl-os"; 553 reg = <0x00080000 0x00040000>; 554 }; 555 partition@5 { 556 label = "NAND.u-boot"; 557 reg = <0x000C0000 0x00100000>; 558 }; 559 partition@6 { 560 label = "NAND.u-boot-env"; 561 reg = <0x001C0000 0x00020000>; 562 }; 563 partition@7 { 564 label = "NAND.u-boot-env.backup1"; 565 reg = <0x001E0000 0x00020000>; 566 }; 567 partition@8 { 568 label = "NAND.kernel"; 569 reg = <0x00200000 0x00800000>; 570 }; 571 partition@9 { 572 label = "NAND.file-system"; 573 reg = <0x00A00000 0x0F600000>; 574 }; 575 }; 576}; 577 578#include "tps65910.dtsi" 579 580&mcasp1 { 581 pinctrl-names = "default"; 582 pinctrl-0 = <&am335x_evm_audio_pins>; 583 584 status = "okay"; 585 586 op-mode = <0>; /* MCASP_IIS_MODE */ 587 tdm-slots = <2>; 588 /* 4 serializers */ 589 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 590 0 0 1 2 591 >; 592 tx-num-evt = <32>; 593 rx-num-evt = <32>; 594}; 595 596&tps { 597 vcc1-supply = <&vbat>; 598 vcc2-supply = <&vbat>; 599 vcc3-supply = <&vbat>; 600 vcc4-supply = <&vbat>; 601 vcc5-supply = <&vbat>; 602 vcc6-supply = <&vbat>; 603 vcc7-supply = <&vbat>; 604 vccio-supply = <&vbat>; 605 606 regulators { 607 vrtc_reg: regulator@0 { 608 regulator-always-on; 609 }; 610 611 vio_reg: regulator@1 { 612 regulator-always-on; 613 }; 614 615 vdd1_reg: regulator@2 { 616 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ 617 regulator-name = "vdd_mpu"; 618 regulator-min-microvolt = <912500>; 619 regulator-max-microvolt = <1312500>; 620 regulator-boot-on; 621 regulator-always-on; 622 }; 623 624 vdd2_reg: regulator@3 { 625 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ 626 regulator-name = "vdd_core"; 627 regulator-min-microvolt = <912500>; 628 regulator-max-microvolt = <1150000>; 629 regulator-boot-on; 630 regulator-always-on; 631 }; 632 633 vdd3_reg: regulator@4 { 634 regulator-always-on; 635 }; 636 637 vdig1_reg: regulator@5 { 638 regulator-always-on; 639 }; 640 641 vdig2_reg: regulator@6 { 642 regulator-always-on; 643 }; 644 645 vpll_reg: regulator@7 { 646 regulator-always-on; 647 }; 648 649 vdac_reg: regulator@8 { 650 regulator-always-on; 651 }; 652 653 vaux1_reg: regulator@9 { 654 regulator-always-on; 655 }; 656 657 vaux2_reg: regulator@10 { 658 regulator-always-on; 659 }; 660 661 vaux33_reg: regulator@11 { 662 regulator-always-on; 663 }; 664 665 vmmc_reg: regulator@12 { 666 regulator-min-microvolt = <1800000>; 667 regulator-max-microvolt = <3300000>; 668 regulator-always-on; 669 }; 670 }; 671}; 672 673&mac { 674 pinctrl-names = "default", "sleep"; 675 pinctrl-0 = <&cpsw_default>; 676 pinctrl-1 = <&cpsw_sleep>; 677 status = "okay"; 678 slaves = <1>; 679}; 680 681&davinci_mdio { 682 pinctrl-names = "default", "sleep"; 683 pinctrl-0 = <&davinci_mdio_default>; 684 pinctrl-1 = <&davinci_mdio_sleep>; 685 status = "okay"; 686 687 ethphy0: ethernet-phy@0 { 688 reg = <0>; 689 }; 690}; 691 692&cpsw_emac0 { 693 phy-handle = <ðphy0>; 694 phy-mode = "rgmii-id"; 695}; 696 697&tscadc { 698 status = "okay"; 699 tsc { 700 ti,wires = <4>; 701 ti,x-plate-resistance = <200>; 702 ti,coordinate-readouts = <5>; 703 ti,wire-config = <0x00 0x11 0x22 0x33>; 704 ti,charge-delay = <0x400>; 705 }; 706 707 adc { 708 ti,adc-channels = <4 5 6 7>; 709 }; 710}; 711 712&mmc1 { 713 status = "okay"; 714 vmmc-supply = <&vmmc_reg>; 715 bus-width = <4>; 716 pinctrl-names = "default"; 717 pinctrl-0 = <&mmc1_pins>; 718 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 719}; 720 721&mmc3 { 722 /* these are on the crossbar and are outlined in the 723 xbar-event-map element */ 724 dmas = <&edma 12 0 725 &edma 13 0>; 726 dma-names = "tx", "rx"; 727 status = "okay"; 728 vmmc-supply = <&wlan_en_reg>; 729 bus-width = <4>; 730 pinctrl-names = "default"; 731 pinctrl-0 = <&mmc3_pins &wlan_pins>; 732 ti,non-removable; 733 ti,needs-special-hs-handling; 734 cap-power-off-card; 735 keep-power-in-suspend; 736 737 #address-cells = <1>; 738 #size-cells = <0>; 739 wlcore: wlcore@0 { 740 compatible = "ti,wl1835"; 741 reg = <2>; 742 interrupt-parent = <&gpio3>; 743 interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; 744 }; 745}; 746 747&edma { 748 ti,edma-xbar-event-map = /bits/ 16 <1 12 749 2 13>; 750}; 751 752&sham { 753 status = "okay"; 754}; 755 756&aes { 757 status = "okay"; 758}; 759 760&dcan1 { 761 status = "disabled"; /* Enable only if Profile 1 is selected */ 762 pinctrl-names = "default"; 763 pinctrl-0 = <&dcan1_pins_default>; 764}; 765