1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright 2007-2011 Freescale Semiconductor, Inc.
4 *
5 * (C) Copyright 2003 Motorola Inc.
6 * Modified by Xianghua Xiao, X.Xiao@motorola.com
7 *
8 * (C) Copyright 2000
9 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
10 */
11
12 #include <common.h>
13 #include <env.h>
14 #include <init.h>
15 #include <watchdog.h>
16 #include <asm/processor.h>
17 #include <ioports.h>
18 #include <sata.h>
19 #include <fm_eth.h>
20 #include <asm/io.h>
21 #include <asm/cache.h>
22 #include <asm/mmu.h>
23 #include <fsl_errata.h>
24 #include <asm/fsl_law.h>
25 #include <asm/fsl_serdes.h>
26 #include <asm/fsl_srio.h>
27 #ifdef CONFIG_FSL_CORENET
28 #include <asm/fsl_portals.h>
29 #include <asm/fsl_liodn.h>
30 #include <fsl_qbman.h>
31 #endif
32 #include <fsl_usb.h>
33 #include <hwconfig.h>
34 #include <linux/compiler.h>
35 #include "mp.h"
36 #ifdef CONFIG_CHAIN_OF_TRUST
37 #include <fsl_validate.h>
38 #endif
39 #ifdef CONFIG_FSL_CAAM
40 #include <fsl_sec.h>
41 #endif
42 #if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_CORENET)
43 #include <asm/fsl_pamu.h>
44 #include <fsl_secboot_err.h>
45 #endif
46 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
47 #include <nand.h>
48 #include <errno.h>
49 #endif
50 #ifndef CONFIG_ARCH_QEMU_E500
51 #include <fsl_ddr.h>
52 #endif
53 #include "../../../../drivers/ata/fsl_sata.h"
54 #ifdef CONFIG_U_QE
55 #include <fsl_qe.h>
56 #endif
57
58 #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
59 /*
60 * For deriving usb clock from 100MHz sysclk, reference divisor is set
61 * to a value of 5, which gives an intermediate value 20(100/5). The
62 * multiplication factor integer is set to 24, which when multiplied to
63 * above intermediate value provides clock for usb ip.
64 */
usb_single_source_clk_configure(struct ccsr_usb_phy * usb_phy)65 void usb_single_source_clk_configure(struct ccsr_usb_phy *usb_phy)
66 {
67 sys_info_t sysinfo;
68
69 get_sys_info(&sysinfo);
70 if (sysinfo.diff_sysclk == 1) {
71 clrbits_be32(&usb_phy->pllprg[1],
72 CONFIG_SYS_FSL_USB_PLLPRG2_MFI);
73 setbits_be32(&usb_phy->pllprg[1],
74 CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK |
75 CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK |
76 CONFIG_SYS_FSL_USB_INTERNAL_SOC_CLK_EN);
77 }
78 }
79 #endif
80
81 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem * usb_phy)82 void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
83 {
84 #ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
85 u32 xcvrprg = in_be32(&usb_phy->port1.xcvrprg);
86
87 /* Increase Disconnect Threshold by 50mV */
88 xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
89 INC_DCNT_THRESHOLD_50MV;
90 /* Enable programming of USB High speed Disconnect threshold */
91 xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
92 out_be32(&usb_phy->port1.xcvrprg, xcvrprg);
93
94 xcvrprg = in_be32(&usb_phy->port2.xcvrprg);
95 /* Increase Disconnect Threshold by 50mV */
96 xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
97 INC_DCNT_THRESHOLD_50MV;
98 /* Enable programming of USB High speed Disconnect threshold */
99 xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
100 out_be32(&usb_phy->port2.xcvrprg, xcvrprg);
101 #else
102
103 u32 temp = 0;
104 u32 status = in_be32(&usb_phy->status1);
105
106 u32 squelch_prog_rd_0_2 =
107 (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0)
108 & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
109
110 u32 squelch_prog_rd_3_5 =
111 (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3)
112 & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
113
114 setbits_be32(&usb_phy->config1,
115 CONFIG_SYS_FSL_USB_HS_DISCNCT_INC);
116 setbits_be32(&usb_phy->config2,
117 CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL);
118
119 temp = squelch_prog_rd_0_2 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
120 out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
121
122 temp = squelch_prog_rd_3_5 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
123 out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
124 #endif
125 }
126 #endif
127
128
129 #if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
130 extern qe_iop_conf_t qe_iop_conf_tab[];
131 extern void qe_config_iopin(u8 port, u8 pin, int dir,
132 int open_drain, int assign);
133 extern void qe_init(uint qe_base);
134 extern void qe_reset(void);
135
config_qe_ioports(void)136 static void config_qe_ioports(void)
137 {
138 u8 port, pin;
139 int dir, open_drain, assign;
140 int i;
141
142 for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
143 port = qe_iop_conf_tab[i].port;
144 pin = qe_iop_conf_tab[i].pin;
145 dir = qe_iop_conf_tab[i].dir;
146 open_drain = qe_iop_conf_tab[i].open_drain;
147 assign = qe_iop_conf_tab[i].assign;
148 qe_config_iopin(port, pin, dir, open_drain, assign);
149 }
150 }
151 #endif
152
153 #ifdef CONFIG_CPM2
config_8560_ioports(volatile ccsr_cpm_t * cpm)154 void config_8560_ioports (volatile ccsr_cpm_t * cpm)
155 {
156 int portnum;
157
158 for (portnum = 0; portnum < 4; portnum++) {
159 uint pmsk = 0,
160 ppar = 0,
161 psor = 0,
162 pdir = 0,
163 podr = 0,
164 pdat = 0;
165 iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
166 iop_conf_t *eiopc = iopc + 32;
167 uint msk = 1;
168
169 /*
170 * NOTE:
171 * index 0 refers to pin 31,
172 * index 31 refers to pin 0
173 */
174 while (iopc < eiopc) {
175 if (iopc->conf) {
176 pmsk |= msk;
177 if (iopc->ppar)
178 ppar |= msk;
179 if (iopc->psor)
180 psor |= msk;
181 if (iopc->pdir)
182 pdir |= msk;
183 if (iopc->podr)
184 podr |= msk;
185 if (iopc->pdat)
186 pdat |= msk;
187 }
188
189 msk <<= 1;
190 iopc++;
191 }
192
193 if (pmsk != 0) {
194 volatile ioport_t *iop = ioport_addr (cpm, portnum);
195 uint tpmsk = ~pmsk;
196
197 /*
198 * the (somewhat confused) paragraph at the
199 * bottom of page 35-5 warns that there might
200 * be "unknown behaviour" when programming
201 * PSORx and PDIRx, if PPARx = 1, so I
202 * decided this meant I had to disable the
203 * dedicated function first, and enable it
204 * last.
205 */
206 iop->ppar &= tpmsk;
207 iop->psor = (iop->psor & tpmsk) | psor;
208 iop->podr = (iop->podr & tpmsk) | podr;
209 iop->pdat = (iop->pdat & tpmsk) | pdat;
210 iop->pdir = (iop->pdir & tpmsk) | pdir;
211 iop->ppar |= ppar;
212 }
213 }
214 }
215 #endif
216
217 #ifdef CONFIG_SYS_FSL_CPC
218 #if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SYS_CPC_REINIT_F)
disable_cpc_sram(void)219 void disable_cpc_sram(void)
220 {
221 int i;
222
223 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
224
225 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
226 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
227 /* find and disable LAW of SRAM */
228 struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
229
230 if (law.index == -1) {
231 printf("\nFatal error happened\n");
232 return;
233 }
234 disable_law(law.index);
235
236 clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
237 out_be32(&cpc->cpccsr0, 0);
238 out_be32(&cpc->cpcsrcr0, 0);
239 }
240 }
241 }
242 #endif
243
244 #if defined(T1040_TDM_QUIRK_CCSR_BASE)
245 #ifdef CONFIG_POST
246 #error POST memory test cannot be enabled with TDM
247 #endif
enable_tdm_law(void)248 static void enable_tdm_law(void)
249 {
250 int ret;
251 char buffer[HWCONFIG_BUFFER_SIZE] = {0};
252 int tdm_hwconfig_enabled = 0;
253
254 /*
255 * Extract hwconfig from environment since environment
256 * is not setup properly yet. Search for tdm entry in
257 * hwconfig.
258 */
259 ret = env_get_f("hwconfig", buffer, sizeof(buffer));
260 if (ret > 0) {
261 tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
262 /* If tdm is defined in hwconfig, set law for tdm workaround */
263 if (tdm_hwconfig_enabled)
264 set_next_law(T1040_TDM_QUIRK_CCSR_BASE, LAW_SIZE_16M,
265 LAW_TRGT_IF_CCSR);
266 }
267 }
268 #endif
269
enable_cpc(void)270 void enable_cpc(void)
271 {
272 int i;
273 int ret;
274 u32 size = 0;
275 u32 cpccfg0;
276 char buffer[HWCONFIG_BUFFER_SIZE];
277 char cpc_subarg[16];
278 bool have_hwconfig = false;
279 int cpc_args = 0;
280 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
281
282 /* Extract hwconfig from environment */
283 ret = env_get_f("hwconfig", buffer, sizeof(buffer));
284 if (ret > 0) {
285 /*
286 * If "en_cpc" is not defined in hwconfig then by default all
287 * cpcs are enable. If this config is defined then individual
288 * cpcs which have to be enabled should also be defined.
289 * e.g en_cpc:cpc1,cpc2;
290 */
291 if (hwconfig_f("en_cpc", buffer))
292 have_hwconfig = true;
293 }
294
295 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
296 if (have_hwconfig) {
297 sprintf(cpc_subarg, "cpc%u", i + 1);
298 cpc_args = hwconfig_sub_f("en_cpc", cpc_subarg, buffer);
299 if (cpc_args == 0)
300 continue;
301 }
302 cpccfg0 = in_be32(&cpc->cpccfg0);
303 size += CPC_CFG0_SZ_K(cpccfg0);
304
305 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
306 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
307 #endif
308 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
309 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
310 #endif
311 #ifdef CONFIG_SYS_FSL_ERRATUM_A006593
312 setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
313 #endif
314 #ifdef CONFIG_SYS_FSL_ERRATUM_A006379
315 if (has_erratum_a006379()) {
316 setbits_be32(&cpc->cpchdbcr0,
317 CPC_HDBCR0_SPLRU_LEVEL_EN);
318 }
319 #endif
320
321 out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
322 /* Read back to sync write */
323 in_be32(&cpc->cpccsr0);
324
325 }
326
327 puts("Corenet Platform Cache: ");
328 print_size(size * 1024, " enabled\n");
329 }
330
invalidate_cpc(void)331 static void invalidate_cpc(void)
332 {
333 int i;
334 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
335
336 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
337 /* skip CPC when it used as all SRAM */
338 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
339 continue;
340 /* Flash invalidate the CPC and clear all the locks */
341 out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
342 while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
343 ;
344 }
345 }
346 #else
347 #define enable_cpc()
348 #define invalidate_cpc()
349 #define disable_cpc_sram()
350 #endif /* CONFIG_SYS_FSL_CPC */
351
352 /*
353 * Breathe some life into the CPU...
354 *
355 * Set up the memory map
356 * initialize a bunch of registers
357 */
358
359 #ifdef CONFIG_FSL_CORENET
corenet_tb_init(void)360 static void corenet_tb_init(void)
361 {
362 volatile ccsr_rcpm_t *rcpm =
363 (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
364 volatile ccsr_pic_t *pic =
365 (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
366 u32 whoami = in_be32(&pic->whoami);
367
368 /* Enable the timebase register for this core */
369 out_be32(&rcpm->ctbenrl, (1 << whoami));
370 }
371 #endif
372
373 #ifdef CONFIG_SYS_FSL_ERRATUM_A007212
fsl_erratum_a007212_workaround(void)374 void fsl_erratum_a007212_workaround(void)
375 {
376 ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
377 u32 ddr_pll_ratio;
378 u32 __iomem *plldgdcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20);
379 u32 __iomem *plldadcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c28);
380 u32 __iomem *dpdovrcr4 = (void *)(CONFIG_SYS_DCSRBAR + 0x21e80);
381 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
382 u32 __iomem *plldgdcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c40);
383 u32 __iomem *plldadcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c48);
384 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
385 u32 __iomem *plldgdcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c60);
386 u32 __iomem *plldadcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c68);
387 #endif
388 #endif
389 /*
390 * Even this workaround applies to selected version of SoCs, it is
391 * safe to apply to all versions, with the limitation of odd ratios.
392 * If RCW has disabled DDR PLL, we have to apply this workaround,
393 * otherwise DDR will not work.
394 */
395 ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
396 FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) &
397 FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
398 /* check if RCW sets ratio to 0, required by this workaround */
399 if (ddr_pll_ratio != 0)
400 return;
401 ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
402 FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
403 FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
404 /* check if reserved bits have the desired ratio */
405 if (ddr_pll_ratio == 0) {
406 printf("Error: Unknown DDR PLL ratio!\n");
407 return;
408 }
409 ddr_pll_ratio >>= 1;
410
411 setbits_be32(plldadcr1, 0x02000001);
412 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
413 setbits_be32(plldadcr2, 0x02000001);
414 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
415 setbits_be32(plldadcr3, 0x02000001);
416 #endif
417 #endif
418 setbits_be32(dpdovrcr4, 0xe0000000);
419 out_be32(plldgdcr1, 0x08000001 | (ddr_pll_ratio << 1));
420 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
421 out_be32(plldgdcr2, 0x08000001 | (ddr_pll_ratio << 1));
422 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
423 out_be32(plldgdcr3, 0x08000001 | (ddr_pll_ratio << 1));
424 #endif
425 #endif
426 udelay(100);
427 clrbits_be32(plldadcr1, 0x02000001);
428 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
429 clrbits_be32(plldadcr2, 0x02000001);
430 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
431 clrbits_be32(plldadcr3, 0x02000001);
432 #endif
433 #endif
434 clrbits_be32(dpdovrcr4, 0xe0000000);
435 }
436 #endif
437
cpu_init_f(void)438 ulong cpu_init_f(void)
439 {
440 extern void m8560_cpm_reset (void);
441 #ifdef CONFIG_SYS_DCSRBAR_PHYS
442 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
443 #endif
444 #if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT)
445 struct law_entry law;
446 #endif
447 #ifdef CONFIG_ARCH_MPC8548
448 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
449 uint svr = get_svr();
450
451 /*
452 * CPU2 errata workaround: A core hang possible while executing
453 * a msync instruction and a snoopable transaction from an I/O
454 * master tagged to make quick forward progress is present.
455 * Fixed in silicon rev 2.1.
456 */
457 if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
458 out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
459 #endif
460
461 disable_tlb(14);
462 disable_tlb(15);
463
464 #if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT)
465 /* Disable the LAW created for NOR flash by the PBI commands */
466 law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
467 if (law.index != -1)
468 disable_law(law.index);
469
470 #if defined(CONFIG_SYS_CPC_REINIT_F)
471 disable_cpc_sram();
472 #endif
473 #endif
474
475 #ifdef CONFIG_CPM2
476 config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
477 #endif
478
479 init_early_memctl_regs();
480
481 #if defined(CONFIG_CPM2)
482 m8560_cpm_reset();
483 #endif
484
485 #if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
486 /* Config QE ioports */
487 config_qe_ioports();
488 #endif
489
490 #if defined(CONFIG_FSL_DMA)
491 dma_init();
492 #endif
493 #ifdef CONFIG_FSL_CORENET
494 corenet_tb_init();
495 #endif
496 init_used_tlb_cams();
497
498 /* Invalidate the CPC before DDR gets enabled */
499 invalidate_cpc();
500
501 #ifdef CONFIG_SYS_DCSRBAR_PHYS
502 /* set DCSRCR so that DCSR space is 1G */
503 setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
504 in_be32(&gur->dcsrcr);
505 #endif
506
507 #ifdef CONFIG_SYS_FSL_ERRATUM_A007212
508 fsl_erratum_a007212_workaround();
509 #endif
510
511 return 0;
512 }
513
514 /* Implement a dummy function for those platforms w/o SERDES */
__fsl_serdes__init(void)515 static void __fsl_serdes__init(void)
516 {
517 return ;
518 }
519 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
520
521 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
enable_cluster_l2(void)522 int enable_cluster_l2(void)
523 {
524 int i = 0;
525 u32 cluster, svr = get_svr();
526 ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
527 struct ccsr_cluster_l2 __iomem *l2cache;
528
529 /* only the L2 of first cluster should be enabled as expected on T4080,
530 * but there is no EOC in the first cluster as HW sake, so return here
531 * to skip enabling L2 cache of the 2nd cluster.
532 */
533 if (SVR_SOC_VER(svr) == SVR_T4080)
534 return 0;
535
536 cluster = in_be32(&gur->tp_cluster[i].lower);
537 if (cluster & TP_CLUSTER_EOC)
538 return 0;
539
540 /* The first cache has already been set up, so skip it */
541 i++;
542
543 /* Look through the remaining clusters, and set up their caches */
544 do {
545 int j, cluster_valid = 0;
546
547 l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
548
549 cluster = in_be32(&gur->tp_cluster[i].lower);
550
551 /* check that at least one core/accel is enabled in cluster */
552 for (j = 0; j < 4; j++) {
553 u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
554 u32 type = in_be32(&gur->tp_ityp[idx]);
555
556 if ((type & TP_ITYP_AV) &&
557 TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC)
558 cluster_valid = 1;
559 }
560
561 if (cluster_valid) {
562 /* set stash ID to (cluster) * 2 + 32 + 1 */
563 clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
564
565 printf("enable l2 for cluster %d %p\n", i, l2cache);
566
567 out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
568 while ((in_be32(&l2cache->l2csr0)
569 & (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
570 ;
571 out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
572 }
573 i++;
574 } while (!(cluster & TP_CLUSTER_EOC));
575
576 return 0;
577 }
578 #endif
579
580 /*
581 * Initialize L2 as cache.
582 */
l2cache_init(void)583 int l2cache_init(void)
584 {
585 __maybe_unused u32 svr = get_svr();
586 #ifdef CONFIG_L2_CACHE
587 ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
588 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
589 struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
590 #endif
591
592 puts ("L2: ");
593
594 #if defined(CONFIG_L2_CACHE)
595 volatile uint cache_ctl;
596 uint ver;
597 u32 l2siz_field;
598
599 ver = SVR_SOC_VER(svr);
600
601 asm("msync;isync");
602 cache_ctl = l2cache->l2ctl;
603
604 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
605 if (cache_ctl & MPC85xx_L2CTL_L2E) {
606 /* Clear L2 SRAM memory-mapped base address */
607 out_be32(&l2cache->l2srbar0, 0x0);
608 out_be32(&l2cache->l2srbar1, 0x0);
609
610 /* set MBECCDIS=0, SBECCDIS=0 */
611 clrbits_be32(&l2cache->l2errdis,
612 (MPC85xx_L2ERRDIS_MBECC |
613 MPC85xx_L2ERRDIS_SBECC));
614
615 /* set L2E=0, L2SRAM=0 */
616 clrbits_be32(&l2cache->l2ctl,
617 (MPC85xx_L2CTL_L2E |
618 MPC85xx_L2CTL_L2SRAM_ENTIRE));
619 }
620 #endif
621
622 l2siz_field = (cache_ctl >> 28) & 0x3;
623
624 switch (l2siz_field) {
625 case 0x0:
626 printf(" unknown size (0x%08x)\n", cache_ctl);
627 return -1;
628 break;
629 case 0x1:
630 if (ver == SVR_8540 || ver == SVR_8560 ||
631 ver == SVR_8541 || ver == SVR_8555) {
632 puts("128 KiB ");
633 /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
634 cache_ctl = 0xc4000000;
635 } else {
636 puts("256 KiB ");
637 cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
638 }
639 break;
640 case 0x2:
641 if (ver == SVR_8540 || ver == SVR_8560 ||
642 ver == SVR_8541 || ver == SVR_8555) {
643 puts("256 KiB ");
644 /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
645 cache_ctl = 0xc8000000;
646 } else {
647 puts("512 KiB ");
648 /* set L2E=1, L2I=1, & L2SRAM=0 */
649 cache_ctl = 0xc0000000;
650 }
651 break;
652 case 0x3:
653 puts("1024 KiB ");
654 /* set L2E=1, L2I=1, & L2SRAM=0 */
655 cache_ctl = 0xc0000000;
656 break;
657 }
658
659 if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
660 puts("already enabled");
661 #if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
662 u32 l2srbar = l2cache->l2srbar0;
663 if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
664 && l2srbar >= CONFIG_SYS_FLASH_BASE) {
665 l2srbar = CONFIG_SYS_INIT_L2_ADDR;
666 l2cache->l2srbar0 = l2srbar;
667 printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
668 }
669 #endif /* CONFIG_SYS_INIT_L2_ADDR */
670 puts("\n");
671 } else {
672 asm("msync;isync");
673 l2cache->l2ctl = cache_ctl; /* invalidate & enable */
674 asm("msync;isync");
675 puts("enabled\n");
676 }
677 #elif defined(CONFIG_BACKSIDE_L2_CACHE)
678 if (SVR_SOC_VER(svr) == SVR_P2040) {
679 puts("N/A\n");
680 goto skip_l2;
681 }
682
683 u32 l2cfg0 = mfspr(SPRN_L2CFG0);
684
685 /* invalidate the L2 cache */
686 mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
687 while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
688 ;
689
690 #ifdef CONFIG_SYS_CACHE_STASHING
691 /* set stash id to (coreID) * 2 + 32 + L2 (1) */
692 mtspr(SPRN_L2CSR1, (32 + 1));
693 #endif
694
695 /* enable the cache */
696 mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
697
698 if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
699 while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
700 ;
701 print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n");
702 }
703
704 skip_l2:
705 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
706 if (l2cache->l2csr0 & L2CSR0_L2E)
707 print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
708 " enabled\n");
709
710 enable_cluster_l2();
711 #else
712 puts("disabled\n");
713 #endif
714
715 return 0;
716 }
717
718 /*
719 *
720 * The newer 8548, etc, parts have twice as much cache, but
721 * use the same bit-encoding as the older 8555, etc, parts.
722 *
723 */
cpu_init_r(void)724 int cpu_init_r(void)
725 {
726 __maybe_unused u32 svr = get_svr();
727 #ifdef CONFIG_SYS_LBC_LCRR
728 fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
729 #endif
730 #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
731 extern int spin_table_compat;
732 const char *spin;
733 #endif
734 #ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
735 ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
736 #endif
737 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
738 defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
739 /*
740 * CPU22 and NMG_CPU_A011 share the same workaround.
741 * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0
742 * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
743 * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both
744 * fixed in 2.0. NMG_CPU_A011 is activated by default and can
745 * be disabled by hwconfig with syntax:
746 *
747 * fsl_cpu_a011:disable
748 */
749 extern int enable_cpu_a011_workaround;
750 #ifdef CONFIG_SYS_P4080_ERRATUM_CPU22
751 enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3);
752 #else
753 char buffer[HWCONFIG_BUFFER_SIZE];
754 char *buf = NULL;
755 int n, res;
756
757 n = env_get_f("hwconfig", buffer, sizeof(buffer));
758 if (n > 0)
759 buf = buffer;
760
761 res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf);
762 if (res > 0) {
763 enable_cpu_a011_workaround = 0;
764 } else {
765 if (n >= HWCONFIG_BUFFER_SIZE) {
766 printf("fsl_cpu_a011 was not found. hwconfig variable "
767 "may be too long\n");
768 }
769 enable_cpu_a011_workaround =
770 (SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) ||
771 (SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2);
772 }
773 #endif
774 if (enable_cpu_a011_workaround) {
775 flush_dcache();
776 mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
777 sync();
778 }
779 #endif
780
781 #ifdef CONFIG_SYS_FSL_ERRATUM_A007907
782 flush_dcache();
783 mtspr(L1CSR2, (mfspr(L1CSR2) & ~L1CSR2_DCSTASHID));
784 sync();
785 #endif
786
787 #ifdef CONFIG_SYS_FSL_ERRATUM_A005812
788 /*
789 * A-005812 workaround sets bit 32 of SPR 976 for SoCs running
790 * in write shadow mode. Checking DCWS before setting SPR 976.
791 */
792 if (mfspr(L1CSR2) & L1CSR2_DCWS)
793 mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000));
794 #endif
795
796 #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
797 spin = env_get("spin_table_compat");
798 if (spin && (*spin == 'n'))
799 spin_table_compat = 0;
800 else
801 spin_table_compat = 1;
802 #endif
803
804 #ifdef CONFIG_FSL_CORENET
805 set_liodns();
806 #ifdef CONFIG_SYS_DPAA_QBMAN
807 setup_qbman_portals();
808 #endif
809 #endif
810
811 l2cache_init();
812 #if defined(CONFIG_RAMBOOT_PBL)
813 disable_cpc_sram();
814 #endif
815 enable_cpc();
816 #if defined(T1040_TDM_QUIRK_CCSR_BASE)
817 enable_tdm_law();
818 #endif
819
820 #ifndef CONFIG_SYS_FSL_NO_SERDES
821 /* needs to be in ram since code uses global static vars */
822 fsl_serdes_init();
823 #endif
824
825 #ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
826 #define MCFGR_AXIPIPE 0x000000f0
827 if (IS_SVR_REV(svr, 1, 0))
828 sec_clrbits32(&sec->mcfgr, MCFGR_AXIPIPE);
829 #endif
830
831 #ifdef CONFIG_SYS_FSL_ERRATUM_A005871
832 if (IS_SVR_REV(svr, 1, 0)) {
833 int i;
834 __be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c;
835
836 for (i = 0; i < 12; i++) {
837 p += i + (i > 5 ? 11 : 0);
838 out_be32(p, 0x2);
839 }
840 p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108;
841 out_be32(p, 0x34);
842 }
843 #endif
844
845 #ifdef CONFIG_SYS_SRIO
846 srio_init();
847 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
848 char *s = env_get("bootmaster");
849 if (s) {
850 if (!strcmp(s, "SRIO1")) {
851 srio_boot_master(1);
852 srio_boot_master_release_slave(1);
853 }
854 if (!strcmp(s, "SRIO2")) {
855 srio_boot_master(2);
856 srio_boot_master_release_slave(2);
857 }
858 }
859 #endif
860 #endif
861
862 #if defined(CONFIG_MP)
863 setup_mp();
864 #endif
865
866 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
867 {
868 if (SVR_MAJ(svr) < 3) {
869 void *p;
870 p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
871 setbits_be32(p, 1 << (31 - 14));
872 }
873 }
874 #endif
875
876 #ifdef CONFIG_SYS_LBC_LCRR
877 /*
878 * Modify the CLKDIV field of LCRR register to improve the writing
879 * speed for NOR flash.
880 */
881 clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
882 __raw_readl(&lbc->lcrr);
883 isync();
884 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
885 udelay(100);
886 #endif
887 #endif
888
889 #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
890 {
891 struct ccsr_usb_phy __iomem *usb_phy1 =
892 (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
893 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
894 if (has_erratum_a006261())
895 fsl_erratum_a006261_workaround(usb_phy1);
896 #endif
897 out_be32(&usb_phy1->usb_enable_override,
898 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
899 }
900 #endif
901 #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
902 {
903 struct ccsr_usb_phy __iomem *usb_phy2 =
904 (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
905 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
906 if (has_erratum_a006261())
907 fsl_erratum_a006261_workaround(usb_phy2);
908 #endif
909 out_be32(&usb_phy2->usb_enable_override,
910 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
911 }
912 #endif
913
914 #ifdef CONFIG_SYS_FSL_ERRATUM_USB14
915 /* On P204x/P304x/P50x0 Rev1.0, USB transmit will result internal
916 * multi-bit ECC errors which has impact on performance, so software
917 * should disable all ECC reporting from USB1 and USB2.
918 */
919 if (IS_SVR_REV(get_svr(), 1, 0)) {
920 struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *)
921 (CONFIG_SYS_DCSRBAR + CONFIG_SYS_DCSR_DCFG_OFFSET);
922 setbits_be32(&dcfg->ecccr1,
923 (DCSR_DCFG_ECC_DISABLE_USB1 |
924 DCSR_DCFG_ECC_DISABLE_USB2));
925 }
926 #endif
927
928 #if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
929 struct ccsr_usb_phy __iomem *usb_phy =
930 (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
931 setbits_be32(&usb_phy->pllprg[1],
932 CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
933 CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
934 CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
935 CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
936 #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
937 usb_single_source_clk_configure(usb_phy);
938 #endif
939 setbits_be32(&usb_phy->port1.ctrl,
940 CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
941 setbits_be32(&usb_phy->port1.drvvbuscfg,
942 CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
943 setbits_be32(&usb_phy->port1.pwrfltcfg,
944 CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
945 setbits_be32(&usb_phy->port2.ctrl,
946 CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
947 setbits_be32(&usb_phy->port2.drvvbuscfg,
948 CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
949 setbits_be32(&usb_phy->port2.pwrfltcfg,
950 CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
951
952 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
953 if (has_erratum_a006261())
954 fsl_erratum_a006261_workaround(usb_phy);
955 #endif
956
957 #endif /* CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE */
958
959 #ifdef CONFIG_SYS_FSL_ERRATUM_A009942
960 erratum_a009942_check_cpo();
961 #endif
962
963 #ifdef CONFIG_FMAN_ENET
964 fman_enet_init();
965 #endif
966
967 #if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_CORENET)
968 if (pamu_init() < 0)
969 fsl_secboot_handle_error(ERROR_ESBC_PAMU_INIT);
970 #endif
971
972 #ifdef CONFIG_FSL_CAAM
973 sec_init();
974
975 #if defined(CONFIG_ARCH_C29X)
976 if ((SVR_SOC_VER(svr) == SVR_C292) ||
977 (SVR_SOC_VER(svr) == SVR_C293))
978 sec_init_idx(1);
979
980 if (SVR_SOC_VER(svr) == SVR_C293)
981 sec_init_idx(2);
982 #endif
983 #endif
984
985 #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_SYS_FSL_ERRATUM_SATA_A001)
986 /*
987 * For P1022/1013 Rev1.0 silicon, after power on SATA host
988 * controller is configured in legacy mode instead of the
989 * expected enterprise mode. Software needs to clear bit[28]
990 * of HControl register to change to enterprise mode from
991 * legacy mode. We assume that the controller is offline.
992 */
993 if (IS_SVR_REV(svr, 1, 0) &&
994 ((SVR_SOC_VER(svr) == SVR_P1022) ||
995 (SVR_SOC_VER(svr) == SVR_P1013))) {
996 fsl_sata_reg_t *reg;
997
998 /* first SATA controller */
999 reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR;
1000 clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
1001
1002 /* second SATA controller */
1003 reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR;
1004 clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
1005 }
1006 #endif
1007
1008 init_used_tlb_cams();
1009
1010 return 0;
1011 }
1012
arch_preboot_os(void)1013 void arch_preboot_os(void)
1014 {
1015 u32 msr;
1016
1017 /*
1018 * We are changing interrupt offsets and are about to boot the OS so
1019 * we need to make sure we disable all async interrupts. EE is already
1020 * disabled by the time we get called.
1021 */
1022 msr = mfmsr();
1023 msr &= ~(MSR_ME|MSR_CE);
1024 mtmsr(msr);
1025 }
1026
cpu_secondary_init_r(void)1027 void cpu_secondary_init_r(void)
1028 {
1029 #ifdef CONFIG_U_QE
1030 uint qe_base = CONFIG_SYS_IMMR + 0x00140000; /* QE immr base */
1031 #elif defined CONFIG_QE
1032 uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
1033 #endif
1034
1035 #ifdef CONFIG_QE
1036 qe_init(qe_base);
1037 qe_reset();
1038 #endif
1039 }
1040
1041 #ifdef CONFIG_BOARD_LATE_INIT
board_late_init(void)1042 int board_late_init(void)
1043 {
1044 #ifdef CONFIG_CHAIN_OF_TRUST
1045 fsl_setenv_chain_of_trust();
1046 #endif
1047
1048 return 0;
1049 }
1050 #endif
1051