1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2013
4 * David Feng <fenghua@phytium.com.cn>
5 * Sharma Bhupesh <bhupesh.sharma@freescale.com>
6 */
7 #include <common.h>
8 #include <dm.h>
9 #include <malloc.h>
10 #include <errno.h>
11 #include <netdev.h>
12 #include <asm/io.h>
13 #include <linux/compiler.h>
14 #include <dm/platform_data/serial_pl01x.h>
15 #include "pcie.h"
16 #include <asm/armv8/mmu.h>
17
18 DECLARE_GLOBAL_DATA_PTR;
19
20 static const struct pl01x_serial_platdata serial_platdata = {
21 .base = V2M_UART0,
22 .type = TYPE_PL011,
23 .clock = CONFIG_PL011_CLOCK,
24 };
25
26 U_BOOT_DEVICE(vexpress_serials) = {
27 .name = "serial_pl01x",
28 .platdata = &serial_platdata,
29 };
30
31 static struct mm_region vexpress64_mem_map[] = {
32 {
33 .virt = 0x0UL,
34 .phys = 0x0UL,
35 .size = 0x80000000UL,
36 .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
37 PTE_BLOCK_NON_SHARE |
38 PTE_BLOCK_PXN | PTE_BLOCK_UXN
39 }, {
40 .virt = 0x80000000UL,
41 .phys = 0x80000000UL,
42 .size = 0xff80000000UL,
43 .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
44 PTE_BLOCK_INNER_SHARE
45 }, {
46 /* List terminator */
47 0,
48 }
49 };
50
51 struct mm_region *mem_map = vexpress64_mem_map;
52
53 /* This function gets replaced by platforms supporting PCIe.
54 * The replacement function, eg. on Juno, initialises the PCIe bus.
55 */
vexpress64_pcie_init(void)56 __weak void vexpress64_pcie_init(void)
57 {
58 }
59
board_init(void)60 int board_init(void)
61 {
62 vexpress64_pcie_init();
63 return 0;
64 }
65
dram_init(void)66 int dram_init(void)
67 {
68 gd->ram_size = PHYS_SDRAM_1_SIZE;
69 return 0;
70 }
71
dram_init_banksize(void)72 int dram_init_banksize(void)
73 {
74 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
75 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
76 #ifdef PHYS_SDRAM_2
77 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
78 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
79 #endif
80
81 return 0;
82 }
83
84 /*
85 * Board specific reset that is system reset.
86 */
reset_cpu(ulong addr)87 void reset_cpu(ulong addr)
88 {
89 }
90
91 /*
92 * Board specific ethernet initialization routine.
93 */
board_eth_init(bd_t * bis)94 int board_eth_init(bd_t *bis)
95 {
96 int rc = 0;
97 #ifdef CONFIG_SMC91111
98 rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
99 #endif
100 #ifdef CONFIG_SMC911X
101 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
102 #endif
103 return rc;
104 }
105