1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright 2015 Freescale Semiconductor, Inc.
4 */
5
6 #include <common.h>
7 #include <dm.h>
8 #include <env.h>
9 #include <fsl_validate.h>
10 #include <fsl_secboot_err.h>
11 #include <fsl_sfp.h>
12 #include <dm/root.h>
13
14 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_FRAMEWORK)
15 #include <spl.h>
16 #endif
17
18 #ifdef CONFIG_ADDR_MAP
19 #include <asm/mmu.h>
20 #endif
21
22 #ifdef CONFIG_FSL_CORENET
23 #include <asm/fsl_pamu.h>
24 #endif
25
26 #ifdef CONFIG_ARCH_LS1021A
27 #include <asm/arch/immap_ls102xa.h>
28 #endif
29
30 #if defined(CONFIG_MPC85xx)
31 #define CONFIG_DCFG_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
32 #else
33 #define CONFIG_DCFG_ADDR CONFIG_SYS_FSL_GUTS_ADDR
34 #endif
35
36 #ifdef CONFIG_SYS_FSL_CCSR_GUR_LE
37 #define gur_in32(a) in_le32(a)
38 #else
39 #define gur_in32(a) in_be32(a)
40 #endif
41
42 /* Check the Boot Mode. If Secure, return 1 else return 0 */
fsl_check_boot_mode_secure(void)43 int fsl_check_boot_mode_secure(void)
44 {
45 uint32_t val;
46 struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR);
47 struct ccsr_gur __iomem *gur = (void *)(CONFIG_DCFG_ADDR);
48
49 val = sfp_in32(&sfp_regs->ospr) & ITS_MASK;
50 if (val == ITS_MASK)
51 return 1;
52
53 #if defined(CONFIG_FSL_CORENET) || !defined(CONFIG_MPC85xx)
54 /* For PBL based platforms check the SB_EN bit in RCWSR */
55 val = gur_in32(&gur->rcwsr[RCW_SB_EN_REG_INDEX - 1]) & RCW_SB_EN_MASK;
56 if (val == RCW_SB_EN_MASK)
57 return 1;
58 #endif
59
60 #if defined(CONFIG_MPC85xx) && !defined(CONFIG_FSL_CORENET)
61 /* For Non-PBL Platforms, check the Device Status register 2*/
62 val = gur_in32(&gur->pordevsr2) & MPC85xx_PORDEVSR2_SBC_MASK;
63 if (val != MPC85xx_PORDEVSR2_SBC_MASK)
64 return 1;
65
66 #endif
67 return 0;
68 }
69
70 #ifndef CONFIG_SPL_BUILD
fsl_setenv_chain_of_trust(void)71 int fsl_setenv_chain_of_trust(void)
72 {
73 /* Check Boot Mode
74 * If Boot Mode is Non-Secure, no changes are required
75 */
76 if (fsl_check_boot_mode_secure() == 0)
77 return 0;
78
79 /* If Boot mode is Secure, set the environment variables
80 * bootdelay = 0 (To disable Boot Prompt)
81 * bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script)
82 */
83 env_set("bootdelay", "-2");
84
85 #ifdef CONFIG_ARM
86 env_set("secureboot", "y");
87 #else
88 env_set("bootcmd", CONFIG_CHAIN_BOOT_CMD);
89 #endif
90
91 return 0;
92 }
93 #endif
94
95 #ifdef CONFIG_SPL_BUILD
spl_validate_uboot(uint32_t hdr_addr,uintptr_t img_addr)96 void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr)
97 {
98 int res;
99
100 /*
101 * Check Boot Mode
102 * If Boot Mode is Non-Secure, skip validation
103 */
104 if (fsl_check_boot_mode_secure() == 0)
105 return;
106
107 printf("SPL: Validating U-Boot image\n");
108
109 #ifdef CONFIG_ADDR_MAP
110 init_addr_map();
111 #endif
112
113 #ifdef CONFIG_FSL_CORENET
114 if (pamu_init() < 0)
115 fsl_secboot_handle_error(ERROR_ESBC_PAMU_INIT);
116 #endif
117
118 #ifdef CONFIG_FSL_CAAM
119 if (sec_init() < 0)
120 fsl_secboot_handle_error(ERROR_ESBC_SEC_INIT);
121 #endif
122
123 /*
124 * dm_init_and_scan() is called as part of common SPL framework, so no
125 * need to call it again but in case of powerpc platforms which currently
126 * do not use common SPL framework, so need to call this function here.
127 */
128 #if defined(CONFIG_SPL_DM) && (!defined(CONFIG_SPL_FRAMEWORK))
129 dm_init_and_scan(true);
130 #endif
131 res = fsl_secboot_validate(hdr_addr, CONFIG_SPL_UBOOT_KEY_HASH,
132 &img_addr);
133
134 if (res == 0)
135 printf("SPL: Validation of U-boot successful\n");
136 }
137
138 #ifdef CONFIG_SPL_FRAMEWORK
139 /* Override weak funtion defined in SPL framework to enable validation
140 * of main u-boot image before jumping to u-boot image.
141 */
jump_to_image_no_args(struct spl_image_info * spl_image)142 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
143 {
144 typedef void __noreturn (*image_entry_noargs_t)(void);
145 uint32_t hdr_addr;
146
147 image_entry_noargs_t image_entry =
148 (image_entry_noargs_t)(unsigned long)spl_image->entry_point;
149
150 hdr_addr = (spl_image->entry_point + spl_image->size -
151 CONFIG_U_BOOT_HDR_SIZE);
152 spl_validate_uboot(hdr_addr, (uintptr_t)spl_image->entry_point);
153 /*
154 * In case of failure in validation, spl_validate_uboot would
155 * not return back in case of Production environment with ITS=1.
156 * Thus U-Boot will not start.
157 * In Development environment (ITS=0 and SB_EN=1), the function
158 * may return back in case of non-fatal failures.
159 */
160
161 debug("image entry point: 0x%lX\n", spl_image->entry_point);
162 image_entry();
163 }
164 #endif /* ifdef CONFIG_SPL_FRAMEWORK */
165 #endif /* ifdef CONFIG_SPL_BUILD */
166