• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1Overview
2--------
3The LX2160A Reference Design (RDB) is a high-performance computing,
4evaluation, and development platform that supports the QorIQ LX2160A
5Layerscape Architecture processor and its personalities.
6
7LX2160A SoC Overview
8--------------------------------------
9For details, please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
10
11LX2160ARDB board Overview
12----------------------
13DDR Memory
14	Two ports of 72-bits (8-bits ECC) DDR4.
15	Each port supports four chip-selects and two DIMM
16	connectors. Data rate upto 3.2 GT/s.
17
18SERDES ports
19	Thress serdes controllers (24 lanes)
20	Serdes1: Supports two USXGMII connectors, each connected through
21	Aquantia AQR107 phy, two 25GbE SFP+ modules connected through an Inphi
22	IN112525 phy and one 40 GbE QSFP+ module connected through an Inphi
23	CS4223 phy.
24
25	Serdes2: Supports one PCIe x4 (Gen1/2/3/4) connector, four SATA 3.0
26	connectors
27
28	Serdes3: Supports one PCIe x8 (Gen1/2/3/4) connector
29
30eSDHC
31	eSDHC1: Supports a SD connector for connecting SD cards
32	eSDHC2: Supports 128GB Micron MTFC128GAJAECE-IT eMMC
33
34Octal SPI (XSPI)
35	Supports two 64 MB onbpard octal SPI flash memories, one SPI emulator
36	for off-board emulation
37
38I2C	All system devices on I2C1 multiplexed using PCA9547 multiplexer
39	Serial Ports
40
41USB 3.0
42	Two high speed USB 3.0 ports. First USB 3.0 port configured as
43	Host with Type-A connector, second USB 3.0 port configured as OTG
44	with micro-AB connector
45
46Serial Ports	Two UART ports
47Ethernet	Two RGMII interfaces
48Debug		ARM JTAG support
49
50Booting Options
51---------------
52a) Flexspi boot
53b) SD boot
54
55Memory map for Flexspi flash
56----------------------------
57Image							Flash Offset
58bl2_flexspi_nor.pbl (RCW+PBI+bl2.pbl)			0x00000000
59fip.bin (bl31 + bl33(u-boot) +
60	 header for Secure-boot(secure-boot only))	0x00100000
61Boot firmware Environment				0x00500000
62DDR PHY Firmware (fip_ddr_all.bin)			0x00800000
63DPAA2 MC Firmware					0x00A00000
64DPAA2 DPL						0x00D00000
65DPAA2 DPC						0x00E00000
66Kernel.itb						0x01000000
67
68Memory map for sd card
69----------------------------
70Image							SD card Offset
71bl2_sd.pbl (RCW+PBI+bl2.pbl)				0x00008
72fip.bin (bl31 + bl33(u-boot) +
73	 header for Secure-boot(secure-boot only))	0x00800
74Boot firmware Environment				0x02800
75DDR PHY Firmware (fip_ddr_all.bin)			0x04000
76DPAA2 MC Firmware					0x05000
77DPAA2 DPL						0x06800
78DPAA2 DPC						0x07000
79Kernel.itb						0x08000
80
81LX2160AQDS board Overview
82----------------------
83Various Mezzanine cards and their connection for different SERDES protocols is
84as below:
85
86SERDES1	|CARDS
87-----------------------------------------------------------------------
881	|Mezzanine:X-M4-PCIE-SGMII (29733)
89	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
90	|Connect I/O cable to IO_SLOT1(J110)
91	|Mezzanine:X-M4-PCIE-SGMII (29733)
92	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
93	|Connect I/O cable to IO_SLOT2(J113)
94------------------------------------------------------------------------
953	|Mezzanine:X-M11-USXGMII (29828)
96	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
97	|Connect I/O cable to IO_SLOT1(J110)
98	|Mezzanine:X-M4-PCIE-SGMII (29733)
99	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
100	|Connect I/O cable to IO_SLOT2(J113)
101------------------------------------------------------------------------
1027	|Mezzanine:X-M11-USXGMII (29828)
103	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
104	|Connect I/O cable to IO_SLOT1(J110)
105	|Mezzanine:X-M4-PCIE-SGMII (29733)
106	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
107	|Connect I/O cable to IO_SLOT2(J113)
108------------------------------------------------------------------------
1098	|Mezzanine:X-M12-XFI (29829)
110	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
111	|Connect I/O cable to IO_SLOT1(J110)
112	|Mezzanine:X-M12-XFI (29829)
113	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
114	|Connect I/O cable to IO_SLOT2(J113)
115------------------------------------------------------------------------
11613	|Mezzanine:X-M8-100G (29734)
117	|Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
118	|Connect I/O cable to IO_SLOT1(J110)
119	|Mezzanine:X-M8-100G (29734)
120	|Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT2(J111)
121	|Connect I/O cable to IO_SLOT2(J113)
122------------------------------------------------------------------------
12315	|Mezzanine:X-M8-100G (29734)
124	|Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
125	|Connect I/O cable to IO_SLOT1(J110)
126	|Mezzanine:X-M4-PCIE-SGMII (29733)
127	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
128	|Connect I/O cable to IO_SLOT2(J113)
129------------------------------------------------------------------------
13017	|Mezzanine:X-M13-25G  (32133)
131	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
132	|Connect I/O cable to IO_SLOT1(J110)
133	|Mezzanine:X-M4-PCIE-SGMII (29733)
134	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
135	|Connect I/O cable to IO_SLOT2(J113)
136------------------------------------------------------------------------
13719	|Mezzanine:X-M11-USXGMII (29828), X-M13-25G (32133)
138	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
139	|Connect M11 I/O cable to IO_SLOT1(J110), M13 I/O cable to IO_SLOT6(J125)
140	|Mezzanine:X-M7-40G (29738)
141	|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT2 (J111)
142	|Connect I/O cable to IO_SLOT2(J113)
143------------------------------------------------------------------------
14420	|Mezzanine:X-M7-40G (29738)
145	|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
146	|Connect  I/O cable to IO_SLOT1(J108)
147	|Mezzanine:X-M7-40G (29738)
148	|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT2 (J111)
149	|Connect I/O cable to IO_SLOT2(J113)
150------------------------------------------------------------------------
151
152
153SERDES2	|CARDS
154-----------------------------------------------------------------------
1552	|Mezzanine:X-M6-PCIE-X8 (29737) *
156	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
157	|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT4 (J117)
158	|Connect I/O cable to IO_SLOT3(J116)
159------------------------------------------------------------------------
1603	|Mezzanine:X-M4-PCIE-SGMII (29733)
161	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
162	|Connect I/O cable to IO_SLOT3(J116)
163	|Mezzanine:X-M4-PCIE-SGMII (29733)
164	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
165	|Connect I/O cable to IO_SLOT4(J119)
166------------------------------------------------------------------------
1675	|Mezzanine:X-M4-PCIE-SGMII (29733)
168	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
169	|Connect I/O cable to IO_SLOT3(J116)
170	|Mezzanine:X-M5-SATA (29687)
171	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
172	|Connect I/O cable to IO_SLOT4(J119)
173------------------------------------------------------------------------
17411	|Mezzanine:X-M4-PCIE-SGMII (29733)
175	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
176	|Connect I/O cable to IO_SLOT7(J127)
177	|Mezzanine:X-M4-PCIE-SGMII (29733)
178	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
179	|Connect I/O cable to IO_SLOT8(J131)
180------------------------------------------------------------------------
181
182
183SERDES3	|CARDS
184-----------------------------------------------------------------------
1852	|Mezzanine:X-M6-PCIE-X8 (29737) *
186	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT5 (J120)
187	|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT6 (J123)
188	|Connect I/O cable to IO_SLOT5(J122)
189-------------------------------------------------------------------------
1903	|Mezzanine:X-M4-PCIE-SGMII (29733)
191	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT5 (J120)
192	|Connect I/O cable to IO_SLOT5(J122)
193	|Mezzanine:X-M4-PCIE-SGMII (29733)
194	|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT6 (J123)
195	|Connect I/O cable to IO_SLOT6(J125)
196-------------------------------------------------------------------------
197
198